Sales : +91-777 804 8217
| Sl. No. | Item Description |
| 1 | Earth work in excavation by mechanical means (Hydraulic excavator) / manual means over areas (exceeding 30cm in depth. 1.5 m in width as well as 10 sqm on plan) including getting out and disposal of excavated earth, lead upto 50m and for all lift as directed by Engineer-in-charge. All kinds of soil |
| 2 | Supplying chemical emulsion in sealed containers including delivery as specified. Chlorpyriphos/ Lindane emulsifiable concentrate of 20% |
| 3 | Diluting and injecting chemical emulsion for POST-CONSTRUCTIONAL anti-termite treatment (excluding the cost of chemical emulsion) : Along external wall where the apron is not provided using chemical emulsion @ 7.5 litres / sqm of the vertical surface of the substructure to a depth of 300 mm including excavation channel along the wall & rodding etc. complete: With Chlorpyriphos / Lindane E.C. 20% with 1% concentration |
| 4 | Treatment of soil under existing floors using chemical emulsion @ one litre per hole, 300 mm apart including drilling 12 mm diameter holes and plugging with cement mortar 1 :2 (1 cement : 2 Coarse sand) to match the existing floor : With Chlorpyriphos/Lindane E.C. 20% with 1% concentration |
| 5 | Treatment at points of contact of wood work by chemical emulsion Chlorpyriphos/ Lindane (in oil or kerosene based solution) @ 0.5 litres per hole by drilling 6 mm dia holes at downward angle of 45 degree at 150 mm centre to centre and sealing the same |
| 6 | Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level : 1:2:4 (1 cement : 2 coarse sand (zone-III) derived from natural sources : 4 graded stone aggregate 20 mm nominal size derived from natural sources ) |
| 7 | Providing and laying cement concrete in retaining walls, return walls, walls (any thickness) including attached pilasters, columns, piers, abutments, pillars, posts, struts, buttresses, string or lacing courses, parapets, coping, bed blocks, anchor blocks, plain window sills, fillets, sunken floor,etc., up to floor five level, excluding the cost of centering, shuttering and finishing : 1:5:10(1 cement : 5 coarse sand (zone-III) derived from natural sources : 10 graded stone aggregate 40 mm nominal size derived from natural sources ) |
| 8 | Reinforced cement concrete work in walls (any thickness), including attached pilasters, buttresses, plinth and string courses, fillets, columns, pillars, piers, abutments, posts and struts etc. up to floor five level, excluding cost of centering, shuttering, finishing and reinforcement : 1:1.5:3 (1 cement : 1.5 coarse sand (zone-III) derived from natural sources : 3 graded stone aggregate 20 mm nominal size derived from natural sources ) |
| 9 | Steel reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding all complete above plinth level. Thermo-Mechanically Treated bars of grade Fe-500D or more. |
| 10 | Brick work with common burnt clay F.P.S. (non modular) bricks of class designation 7.5 in superstructure above plinth level up to floor V level in all shapes and sizes in : Cement mortar 1:6 (1 cement : 6 coarse sand) |
| 11 | Half brick masonry with common burnt clay F.P.S. (non modular) bricks of class designation 7.5 in superstructure above plinth level up to floor V level. Cement mortar 1:4 (1 cement :4 coarse sand) |
| 12 | Providing and fixing ISI marked flush door shutters conforming to IS : 2202 (Part I) decorative type, core of block board construction with frame of 1st class hard wood and well matched teak 3 ply veneering with vertical grains or cross bands and face veneers on both faces of shutters. 35 mm thick including ISI marked Stainless Steel butt hinges with necessary screws |
| 13 | Providing and fixing aluminium sliding door bolts, ISI marked anodised (anodic coating not less than grade AC 10 as per IS : 1868), transparent or dyed to required colour or shade, with nuts and screws etc. complete : 250x16 mm |
| 14 | Providing and fixing aluminium tower bolts, ISI marked, anodised (anodic coating not less than grade AC 10 as per IS : 1868 ) transparent or dyed to required colour or shade, with necessary screws etc. complete : 250x10 mm |
| 15 | Providing and fixing aluminium handles, ISI marked, anodised (anodic coating not less than grade AC 10 as per IS : 1868) transparent or dyed to required colour or shade, with necessary screws etc. complete : 100 mm |
| 16 | Providing and fixing aluminium hanging floor door stopper, ISI marked, anodised (anodic coating not less than grade AC 10 as per IS : 1868) transparent or dyed to required colour and shade, with necessary screws etc. complete. Twin rubber stopper |
| 17 | Providing and fixing Glass mossaic tiles at finished plain wall surface of size 20 mm x 20 mm x 4 mm in all colour, design , fixing in customize design as per direction of Engineer-in- Charge. The glass mosaic tiles to be fixed on the wall surface with the help of approved adhesive applied at the rate of 2.5 kg per sqm and grouting of the same. The rate is inclusive of all operation, material and required pattern approved by Engineer-in-Charge: |
| 18 | 12 mm cement plaster of mix : 1:6 (1 cement: 6 fine sand) |
| 19 | 15 mm cement plaster on the rough side of single or half brick wall of mix : 1:6 (1 cement: 6 fine sand) |
| 20 | Distempering with 1st quality acrylic distemper (ready mixed) having VOC content less than 50 gram/litre of approved manufacture and of required shade and colour all complete to achieve even shade and colour : New work (two or more coats) over and including water thinnable priming coat with cement primer having VOC content less than 50 gram/litre |
| 21 | Providing and applying white cement based putty of average thickness 1 mm, of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete. |
| 22 | Distempering with 1st quality acrylic distemper, having VOC (Volatile Organic Compound ) content less than 50 grams/ litre, of approved brand and manufacture, including applying additional coats wherever required, to achieve even shade and colour. Old work (one or more coats) |
| 23 | Repairs to plaster of thickness 12 mm to 20 mm in patches of area 2.5 sq. meters and under, including cutting the patch in proper shape, raking out joints and preparing and plastering the surface of the walls complete, including disposal of rubbish to the dumping ground within 50 metres lead : With cement mortar 1:4 (1 cement : 4 fine sand) |
| 24 | Demolishing cement concrete manually/ by mechanical means including disposal of material within 50 metres lead as per direction of Engineer - in - charge. Nominal concrete 1:3:6 or richer mix (i/c equivalent design mix) |
| 25 | Demolishing brick work manually/ by mechanical means including stacking of serviceable material and disposal of unserviceable material within 50 metres lead as per direction of Engineer-in-charge. In cement mortar |
| 26 | Taking out doors, windows and clerestory window shutters (steel or wood) including stacking within 50 metres lead : Of area 3 sq. metres and below |
| 27 | Dismantling tile work in floors and roofs laid in cement mortar including stacking material within 50 metres lead. For thickness of tiles 10 mm to 25 mm |
| 28 | Dismantling wooden boardings in lining of walls and partitions, excluding supporting members but including stacking within 50 metres lead : Up to 10 mm thick |
| 29 | Dismantling C.I. or asbestos rain water pipe with fittings and clamps including stacking the material within 50 metres lead : 75 to 80 mm dia pipe |
| 30 | Disposal of building rubbish / malba / similar unserviceable, dismantled or waste materials by mechanical means, including loading, transporting, unloading to approved municipal dumping ground or as approved by Engineer-in-charge, beyond 50 m initial lead, for all leads including all lifts involved. |
| 31 | Providing and fixing aluminium work for doors, windows, ventilators and partitions with extruded built up standard tubular sections/ appropriate Z sections and other sections of approved make conforming to IS: 733 and IS: 1285, fixing with dash fasteners of required dia and size, including necessary filling up the gaps at junctions, i.e. at top, bottom and sides with required EPDM rubber/ neoprene gasket etc. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, Aluminium snap beading for glazing / paneling, C.P. brass / stainless steel screws, all complete as per architectural drawings and the directions of Engineer-in-charge. (Glazing, paneling and dash fasteners to be paid for separately) : For fixed portion Powder coated aluminium (minimum thickness of powder coating 50 micron) |
| 32 | For shutters of doors, windows & ventilators including providing and fixing hinges/ pivots and making provision for fixing of fittings wherever required including the cost of EPDM rubber / neoprene gasket required (Fittings shall be paid for separately) Powder coated aluminium (minimum thickness of powder coating 50 micron) |
| 33 | Providing and fixing 12 mm thick prelaminated particle board flat pressed three layer or graded wood particle board conforming to IS: 12823 Grade l Type ll, in panelling fixed in aluminum doors, windows shutters and partition frames with C.P. brass / stainless steel screws etc. complete as per architectural drawings and directions of engineer-in-charge. Pre-laminated particle board with decorative lamination on both sides |
| 34 | Providing and fixing glazing in aluminium door, window, ventilator shutters and partitions etc. with EPDM rubber / neoprene gasket etc. complete as per the architectural drawings and the directions of engineer-in-charge . (Cost of aluminium snap beading shall be paid in basic item): With float glass panes of 5 mm thickness (weight not less than 12.50 kg/ sqm) |
| 35 | Providing and fixing false ceiling at all heights with integral densified calcium silicate reinforced with fibre and natural filler false ceiling tiles of Size 595x595 mm of approved texture, design and pattern shaving NRC (Noise Reduction coefficient) of 0.50 (minimum) as per IS 8225:1987, Light reflectance of 85% (minimum). Non combustible as per BS:476 (part-4), fire performance as per BS:476 (part 6 &7),humidity resistance of 100%, thermal conductivity < 0.043 W/m Kas per ASTM 518:1991,in true horizontal level suspended on interlocking metal T-Grid of hot dipped galvanised iron section of 0.33mmthick (galvanized @ 120 grams per sqm including both sides)comprising of main-T runners of size 24x38 mm of length 3000mm, cross - T of size 24x32 mm of length 1200 mm and secondary intermediate cross-T of size 24x32 mm of length 600mm to form grid module of size 600 x 600 mm, suspended from ceiling using galvanised mild steel items (galvanizing @ 80 grams per sqm) i.e.50 mm long, 8 mm outer diameter M-6 dash fasteners, 6 mm dia fully threaded hanger rod upto 1000 mm length and L-shape level adjuster of size 85x25x25x2 mm. Galvanised iron perimeter wall angle of size 24x24x0.40 mm of length 3000 mm to be fixed onpe riphery wall / partition with the help of plastic rawl plugs at 450mm center to center and 40 mm long dry wall S.S screws. The work shall be carried out as per specifications, drawing and as per directions of Engineer-in-Charge. With 15 mm thick tegular edged light weight calcium-silicate false ceiling tiles. |
| 36 | GST @ 0.973 multiplying factor on DSR 2023 (On Rs. 3,87,354/-) |
| 37 | Acoustic Wall Paneling Full Height (VC Office):- Providing and fixing high moisture resistant Slated Wooden Acoustic panel with lineal perforations to be fixed on walls.The panels shall be with melamine laminate (Beech, Maple, Natural Teak, mahogany etc.) finish of size 2440mm x 128/192mm x 16mm with 3-4mm grooves at 28/21 mm pitch toungue and groove edges for seamless mounting having minimum density of 800 kg/m3 and system NRC of 0.83 as per IS 8225 / ISO 354 / ASTM 423C . The back of the panels are perforated with 10mm diameter circular holes with a nonwoven fabric covering of 0.2mm for providing Sound absorption via the acoustic impedance method. Panel is to be fixed on 18mm aluminium keel channel with centre & edge bracket @ 600mm c/c as recommended by the manufacturer on wall with screw fixed horizontal / vertical in tongue & groove system. The cavity of framework should be inserted with 25mm thick & 1000GSM density, thermally bonded polyester fibre for better insulation. The shade of panel will be approved by engineer in charge. Make:- Absound Overseas / Topacustic / Anutone |
| 38 | Acoustic Wall Paneling Upto 4' From Floor (VC Room):- Providing and fixing high moisture resistant Slated Wooden Acoustic panel with lineal perforations to be fixed on walls.The panels shall be with melamine laminate (Beech, Maple, Natural Teak, mahogany etc.) finish of size 2440mm x 128/192mm x 16mm with 3-4mm grooves at 28/21 mm pitch toungue and groove edges for seamless mounting having minimum density of 800 kg/m3 and system NRC of 0.83 as per IS 8225 / ISO 354 / ASTM 423C . The back of the panels are perforated with 10mm diameter circular holes with a nonwoven fabric covering of 0.2mm for providing Sound absorption via the acoustic impedance method. Panel is to be fixed on 50mm GI framework consisting of 48x36x34x0.5mm thick GI Studs wall channels & 50x35x35x0.5mm floor channels @ 600mm c/c back support with 18mm aluminium keel channel with centre & edge bracket as recommended by the manufacturer with screw fixed horizontal / vertical to wall in tongue & groove system. The cavity of GI framework should be inserted with 50mm thick 1000GSM, thermally bonded polyester fibre for better insulation. The shade of panel will be approved by architect or engineer in charge. Make:- Absound Overseas / Topacustic / Anutone |
| 39 | Absoft Glass Fibre Ceiling Tile :- Providing and fixing Absoft fibre glass acoustic ceiling tile of size 595 x 595 x 15mm of square/tegular edge having noise reduction co-efficient NRC of 0.90. Measurement of sound absorption coefficient in a reverberation room according to EN ISO 354 room method testing having fire class 1& P. Tiles should be ecology friendly, confirm to international environmental standards and totally recyclable. Tile is to be layed on frame work of T-24 Grid. Precoated GI angle of size 24x24x0.4 mm thick fixed to the brick wall / partition at the perimeter of ceiling with Nylon Sleeves and wafer head drywall screws. The suspended main GI ‘T’ section (bottom precoated-White) with polyester coating of 25 microns of size 24x38x0.3 mm thick and 3600 mm long from soffit in one direction with the help of metal rawl plug, cleat & G I Rod 4 mm diameter with galvanized spring steel level clip at 1200 mm centre to centre from soffit. G I cross T section (bottom precoated-White) size 24x25x0.3 mm and 1200mm & 600mm long is insert fixed into the slots provided as interlock in main ‘T’ at 600 mm centre to cetre to form 600x600mm grid size for laying tile size of 595x595 mm and required cutting/making , opening for services like diffusers, grills, light fittings, fixures, smoke detectors etc. All accessories such as T-24 Grid accessories cleat, suspenders, levelers, clips etc, shall be supplied and installed in accordance with manufacturer recommendation. Make:- Absound Overseas / Topacustic / Ecophone |
| 40 | Acoustic Door:- Fabricating and fixing of 77mm thk acoustic doors consisting of 2nd class teak wood frame with acousic peripheral seals all around. The door shutter frames to be of klin dried chemically treated 2nd teak wood and infill with 50mm rockwool insulation of 48kg/m3 density and 8mm calcium silicate board. The door shutter frame to be lapped with 12mm commercial ply duly treated for fire retardance and 1mm thick laminate on both sides. Cost includes 2nd class teak wood chowkhat (section size : 125 x 90mm) fixingacoustical seals ,stainless steel ball bearing hinges,door closers, door stoppers and s/steel handles. Analysis for 1.80 mtr x 2.10 mtr = 3.78 sqm |
| 41 | Supplying and placing in position of director desk clint as per image. Premium suites director table structure of L- shaped desk with primary work surface over all size is 2200mm(l)x 2000mm(d)x 740mm(h) 45mm thick table top made of prelaminated particle board work surface with warm walnut finish, 2mm thick pvc edge banding made of same matte finish. side pannel is made of 45mm thick . Provision of side runner/a of size is 2000mm(l)x 500mm(d)x 700mm(h) ,(combination construction- table top based on ss stud grade 304 left side below from table top side runner/a have 2 doors storage + 3 drawers with cetnral lock handles + 1 open box fixed shelve & right side below ss stud 1 fixed pedestal top 18mm thick . Fixed pedestal of size 464mm(l)x 500mm(d)x 646mm(h) , having 2 drawers + 1 filling drawer with castors in provided with cetnral lock for security and handles are provided for easy of opening..The OEM/ Bidder should have the following certification ISO: 9001:2008; ISO: 14001:2004; ISO: 18001:2007, ISO 45001, UL Greengaurd, Green Pro, Indian Design Mark and AIOTA for ergonomically design of relevant category of products. The OEM/ Bidder should also be a member of BIFMA since 15 years and one or more products of the OEM should beBIFMA certified as BIFMA COMPLAINT as well as BIFMA LEVEL ONE certified. Complete as per direction of Engineer -in –Charge . |
| 42 | Supplying and Placing in Position of Mesh High Back Office Chair in Raven Black size :- (W) 700mm X (D) 700mm X (H) 1185mm. Seat Depth 450mm. Seat Width 510mm. Back Height 700mm. Ergonomic to the core, the Petra office chair collection is designed for a wide range of body types, thanks to its thoughtful design that keeps you posture perfect. We believe you deserve a chair that fits you: everything from the panelled backrest, 3D armrest, and headrest support, to the seat depth. Wrapped in breathable mesh fabric, with the Petra high back office chair, experience tailored comfort that works as hard as you do. Ergonomic design helps maintain posture for better productivity. Breathable mesh backrest and soft seat offer a comfortable seating experience. 3D adjustable armrests move up-down, front-back and rotates left-right for elevated wrist and shoulder comfort. Adjustable tilt-back headrest provides tailored neck and head support. Sliding seat adjusts by with 3 locking positions offers personalised comfort. 120 kg load-bearing capacity ensures stability and security for the user. Pneumatic height adjustment allows you to adjust the seat height with ease. Tilt tension control lets you increase or decrease the resistance while you recline. A sturdy metal base ensures longevity, all while elevating the aesthetic. High-quality casters ensure smooth noise-free movement. The Seller / Company should be NABCB CERTIFIED ISO-9001:2008, ISO-9001:2015, ISO-14001:2015, OHSAS-18001:2007. OTHER CERTIFICATIONS : Green pro, Indian Design Mark, AIOTA, FSC & PEFC certified. The Bidder should also be a member of BIFMA and One or more products of the OEM should be certified as BIFMA LEVEL compliant and an official link/screenshot of the product listing must be provided from www.bifma.org”.The OEM/ Bidder should have the following certification ISO: 9001:2008; ISO: 14001:2004; ISO: 18001:2007, ISO 45001, UL Greengaurd, Green Pro, Indian Design Mark and AIOTA for ergonomically design of relevant category of products. The OEM/ Bidder should also be a member of BIFMA since 15 years and one or more products of the OEM should beBIFMA certified as BIFMA COMPLAINT as well as BIFMA LEVEL ONE certified. Complete as per direction of Engineer -in –Charge . |
| 43 | Supplying and placing in position of medium back mesh chair with matte finish medium back 360㸠degree revolving chair, * all over size is : 630mm lx 675mm dx 1115mm h , *the chair made of full mesh. It will comes in matte finsih in contemporary style . Details : * arms : amrest is having two adjustment heights up & down . * use of ply: 12 mm thick hot pressed bwr plywood is grade - 303 for seat. * seat: 40 ã± 2 mm thick polyurethane foam with density 32 ã±3 kg per cu meter for best quality cushioning in seat , * back : frame of design shall be curved made of two pieces injection moulded frame cover with mesh . Backrest support adjustable lumbar support * mechanism : self weighted multi locking mechanism . * only seat size is 520mm lx 525mm dx 445-545mm h & the back size is 470mm lx 590mm h , seat maximum height is 545mm & minimum height is 445mm & back height from floor maximum height is 1115mm & minimum height is 1015mm . * gas lift 100 mm telescopic haudraulic * base : 650 mm chrome base with smooth castors.The OEM/ Bidder should have the following certification ISO: 9001:2008; ISO: 14001:2004; ISO: 18001:2007, ISO 45001, UL Greengaurd, Green Pro, Indian Design Mark and AIOTA for ergonomically design of relevant category of products. The OEM/ Bidder should also be a member of BIFMA since 15 years and one or more products of the OEM should beBIFMA certified as BIFMA COMPLAINT as well as BIFMA LEVEL ONE certified. Complete as per direction of Engineer -in –Charge . |
| 44 | Supplying and placing in position of 4str dining table as per photograph. Table size :- (W)1200mmX (D)750mm X (H)760mm. Chair Size :-(W)485mm X (D)490mm X (H)990mm. Tabletop crafted of exotic veneer.Legs crafted of premium solid wood.Kiln-dried solid wood makes it warp and scratch-resistant.Premium fabric upholstery feels soft and sumptuousBreathable upholstery with a comfortable stretch, ideal for everyday use.Tilted padded backrest offer comfortable seating experience.Wooden accent on the chair complements the design.Soft cushioning offers comfortable seating experience. .The OEM/ Bidder should have the following certification ISO: 9001:2008; ISO: 14001:2004; ISO: 18001:2007, ISO 45001, UL Greengaurd, Green Pro, Indian Design Mark and AIOTA for ergonomically design of relevant category of products. The OEM/ Bidder should also be a member of BIFMA since 15 years and one or more products of the OEM should beBIFMA certified as BIFMA COMPLAINT as well as BIFMA LEVEL ONE certified. Complete as per direction of Engineer -in –Charge . |
| 45 | Supplying and placing three seater exclusive premium leatherette modernist classic design lounge seating sofa size is 1905mm(l) x890mm(d)x 870mm(h) with kiln-dried wood framing makes it warp and scratch resistant,comfortable seat depth & height designed keeping modern indian lifestyle in mind,wrapped in buttery-soft premium leatherette, the panelled back and cushioned armrests encourage lounging,designed with modernity & elegance, choose the option that suits your home. Combination construction structure are made in moisture content shall be less than (10-12)%. thickness of plywood used (mm) shall be 12 mm grade is 303 indian standard for commercial (common) and moisture proof plywood (tentative).understructure frame shall be constructed from 18 mm thick kiln-dried german beech wood framing is highly durable. the complete structure shall be covered by p.u.foam fixed with adhesive glue ,the frame shall be padded with high resilience polyurethane foam having 28 +/- 5 density in seat it shall be stack foam of 50mm thik,40mm thick back foam having 20 +/- 5 density foam used ,there shall be cushion arm 40mm thick provided padded with high resilience polyurethane foam having density 20 +/- 5. the complete stack foam structure shall be covered with premium leatherette in black-eerie black-coffee brown,brown-burnt umber colour, it complements the modish legs are made by round shape in pvc material. ( seat : 510 mm(d) x 445mm(h) , arms height @ 620mm / back height @ 460mm ).The OEM/ Bidder should have the following certification ISO: 9001:2008; ISO: 14001:2004; ISO: 18001:2007, ISO 45001, UL Greengaurd, Green Pro, Indian Design Mark and AIOTA for ergonomically design of relevant category of products. The OEM/ Bidder should also be a member of BIFMA since 15 years and one or more products of the OEM should beBIFMA certified as BIFMA COMPLAINT as well as BIFMA LEVEL ONE certified. Complete as per direction of Engineer -in –Charge . |
| 46 | Splying and placing two seater exclusive premium leatherette modernist classic design lounge seating sofa size is 1410mm(l) x890mm(d)x 870mm(h) with kiln-dried wood framing makes it warp and scratch resistant,comfortable seat depth & height designed keeping modern indian lifestyle in mind,wrapped in buttery-soft premium leatherette, the panelled back and cushioned armrests encourage lounging,designed with modernity & elegance, choose the option that suits your home. Combination construction structure are made in moisture content shall be less than (10-12)%. thickness of plywood used (mm) shall be 12 mm grade is 303 indian standard for commercial (common) and moisture proof plywood (tentative).understructure frame shall be constructed from 18 mm thick kiln-dried german beech wood framing is highly durable. the complete structure shall be covered by p.u.foam fixed with adhesive glue ,the frame shall be padded with high resilience polyurethane foam having 28 +/- 5 density in seat it shall be stack foam of 50mm thik,40mm thick back foam having 20 +/- 5 density foam used ,there shall be cushion arm 40mm thick provided padded with high resilience polyurethane foam |
| 47 | Supplying and Placing in Potition of Solid Wood Coffee Table size (W)1130mm X (D)630mm X (H)410mm. Inspired by the mid-century modern era, the Hopper collection flaunts clean silhouettes with tapered legs. Crafted with solid beech wood, the dark oak finish accentuates the distinctive wood grains. While the clear glass tabletop flaunts the charming wooden accent. The glass tabletop is made with sturdy glass, beautifully bordered by a solid wood frame. Designed for modern Indian homes, it makes a perfect spot to enjoy cozy talks over a cup of coffee. 8 mm Glass Top. Solid Wood Legs.The OEM/ Bidder should have the following certification ISO: 9001:2008; ISO: 14001:2004; ISO: 18001:2007, ISO 45001, UL Greengaurd, Green Pro, Indian Design Mark and AIOTA for ergonomically design of relevant category of products. The OEM/ Bidder should also be a member of BIFMA since 15 years and one or more products of the OEM should beBIFMA certified as BIFMA COMPLAINT as well as BIFMA LEVEL ONE certified. Complete as per direction of Engineer -in –Charge . having density 20 +/- 5. the complete stack foam structure shall be covered with premium leatherette in black-eerie black-coffee brown,brown-burnt umber colour, it complements the modish legs are made by round shape in pvc material.( seat : 510 mm(d) x 445mm(h) , arms height @ 620mm / back height @ 460mm ).The OEM/ Bidder should have the following certification ISO: 9001:2008; ISO: 14001:2004; ISO: 18001:2007, ISO 45001, UL Greengaurd, Green Pro, Indian Design Mark and AIOTA for ergonomically design of relevant category of products. The OEM/ Bidder should also be a member of BIFMA since 15 years and one or more products of the OEM should beBIFMA certified as BIFMA COMPLAINT as well as BIFMA LEVEL ONE certified. Complete as per direction of Engineer -in –Charge . |
| 48 | Supplying and Placing in Potition of Solid Wood Side Table size (W)680mm X (D)530mm X (H)450mm. Inspired by the mid-century modern era, the Hopper collection flaunts clean silhouettes with tapered legs. Crafted with solid beech wood, the dark oak finish accentuates the distinctive wood grains. While the clear glass tabletop flaunts the charming wooden accent. The glass tabletop is made with sturdy glass, beautifully bordered by a solid wood frame. Designed for modern Indian homes, it effortlessly complements your space. 8 mm Glass Top. Solid Wood Legs.The OEM/ Bidder should have the following certification ISO: 9001:2008; ISO: 14001:2004; ISO: 18001:2007, ISO 45001, UL Greengaurd, Green Pro, Indian Design Mark and AIOTA for ergonomically design of relevant category of products. The OEM/ Bidder should also be a member of BIFMA since 15 years and one or more products of the OEM should beBIFMA certified as BIFMA COMPLAINT as well as BIFMA LEVEL ONE certified. Complete as per direction of Engineer -in –Charge . |
| 49 | Acoustic Wall Paneling Above 4' (V C Room):- Providing & fixing Acoustical wall panelling with magnesite bonded fibril stoff panels of size 1200 x 600 x 25mm on wall for sound absorption.The panel will be factory finished with bed/plain fabric. The panel having 400 kg/m3 density with relative humidity of RH 95 which will comprise to system NRC of 1.0 as per IS 8225 / ISO 354 / ASTM 423C with the system. This acoustic panel will be fix on 50mm GI framework backed with upvc H-spline.The GI frame consisting of 48x36x34x0.5mm thick studs wall channels &50x35x35x0.5mm thick floor channels @ 600mm c/c orizontal / vertical with the help of steel screw and filling of 50mm thick 1000GSM, thermally bonded polyester fibre for better insulation in cavity of made GI frame for better insulation. The colour of fabric panel will be approved by architect or engineer incharge. Make:- Absound Overseas / Topacustic / Anutone |
| 50 | Providing & fixing 12mm thick AC5 grade laminated wooden flooring of Action Tesa, Pergo, Armstrong or equivalent made from high density fibre board having density 900 kg/m³ or more, core board based of dome technology in 12mm thickness, made from lignocellulose material-specifically “plantation timbers” like eucalyptus manufactured with homogeneous core, the flooring shall be tropicalized with an anti-bacterial surface with dimensional stability and laminated with melamine formaldehyde impregnated European made décor paper (70-120gsm) duly overplayed with an anti-abrasion layer of aluminium oxide impregnated tissue (55,65,85 gsm) in AC5 6500 abrasion cycle ) plank size 193 x 1214. the product shall have an isometric locking profile made from a 5 spindled profiling head. the locking profile shall be wax coated to prevent moisture seepage. the laminate flooring shall to be fixed on a base of 2mm thick layer of PU foam having a density of 24kg/m³. the bare floor shall be 1st covered with PE sheet having a thickness of 0.2mm as per direction of Engineer-in-charge. |
| 51 | Wiring for light point/ fan point/ exhaust fan point/ call bell point with 1.5 sq.mm FRLS/HFFR PVC insulated copper conductor single core cable in surface/ recessed medium class PVC conduit, with modular switch, modular plate, suitable GI box and earthing the point with 1.5 sq.mm FRLS/HFFR PVC insulated copper conductor single core cable etc. as required. Group C |
| 52 | Wiring for circuit/ submain wiring along with earth wire with the following sizes of FRLS/HFFR PVC insulated copper conductor, single core cable in surface/ recessed medium class PVC conduit as required. 2 x 1.5 sq. mm + 1 X 1.5 sq. mm earth wire |
| 53 | 2 x 4 sq. mm + 1 X 4 sq. mm earth wire |
| 54 | 2 x 6 sq. mm + 1 X 6 sq. mm earth wire |
| 55 | 4 x 4 sq. mm + 2 X 4 sq. mm earth wire |
| 56 | Supplying, drawing, Installation, Testing and commissioning of CAT6 UTP LSZH 23AWG Twisted Pair Cable in existing conduit/ on surface, Category 6 Unshielded Twisted Pair, 4 pair should be complied as per UL/ETL verification program for compliance with ANSI/TIA-568.2-D standard. Outer diameter should be in the range of 6.1mm nominal with Operating Temperature Range : -5° to +60°C, Bending Radius :< 4 X Cable Diameter at –5°C ± 1°C and Pulling Force : 11.5Kg etc. complete as required. 1 Run of cable |
| 57 | Supplying and fixing of following sizes of steel conduit along with accessories in surface/recess including painting in case of surface conduit, or cutting the wall and making good the same in case of recessed conduit as required. 20 mm |
| 58 | Supplying and fixing of following sizes of medium class PVC conduit along with accessories in surface/recess including cutting the wall and making good the same in case of recessed conduit as required. 25 mm |
| 59 | Supplying and fixing suitable size GI box with modular plate and cover in front on surface or in recess, including providing and fixing 3 pin 5/6 A modular socket outlet and 5/6 A modular switch, connections etc. as required. |
| 60 | Supplying and fixing suitable size GI box with modular plate and cover in front on surface or in recess, including providing and fixing 2 nos. 3 pin 5/6 A modular socket outlet and 2 nos. 5/6 A modular switch, connections etc. as required. (For light plugs to be used in non-residential buildings). |
| 61 | Supplying and fixing following size/ modules, GI box along with modular base & cover plate for modular switches in recess etc. as required. 3 Module (100mmX75mm) |
| 62 | Supplying and fixing suitable size GI box with modular plate and cover in front on surface or in recess, including providing and fixing 6 pin 5/6 & 15/16 A modular socket outlet and 15/16 A modular switch, connections etc. as required. |
| 63 | Supplying and fixing suitable size GI box with modular plate and cover in front on surface or in recess, including providing and fixing 2 Nos. of 3 pin 5/6 & 1 No. of 6 pin 15/16 amps modular socket outlet and 15/16 amps modular switch and 1 No. blanking plate connection etc. as required. (For computer point) |
| 64 | Supplying & fixing suitable size GI box with modular plate and cover in front on surface or in recess including providing and fixing 25 A modular socket outlet and 25A modular SP MCB, \\"C\\" curve including connections, painting etc. as required. |
| 65 | Supplying and fixing RJ-45 Data socket on the existing modular plate & switch box including connections but excluding modular plate etc. as required. |
| 66 | Providing and fixing following rating and breaking capacity and pole MCCB with thermomagnetic release and terminal spreaders in existing cubicle panel board including drilling holes in cubicle panel, making connections, Ics=100% Icu and Operational Voltage 690V etc. as required. 100 A, 16 KA,TPMCCB |
| 67 | Supplying and fixing 5 A to 32 A rating, 240/415 V, 10 kA, \\"C\\" curve, miniature circuit breaker suitable for inductive load of following poles in the existing MCB DB complete with connections, testing and commissioning etc. as required. Single pole |
| 68 | Supplying and fixing of following ways surface / recess mounting, vertical type, 415 V, TPN MCB distribution board of sheet steel, dust protected, duly powder painted, inclusive of 200 A tinned copper bus bar, common neutral link, earth bar, din bar for mounting MCBs (but without MCBs and incomer) as required. (Note : Vertical type MCB TPDB is normally used where 3 phase outlets are required.) 8 way (4 + 24), Double door |
| 69 | SITC of 400 mm cabin / wall fan with all accessories on the existing wall with the help of fastener i/c connection etc. complete as reqd. |
| 70 | SITC of heavy-duty exhaust fan 300 mm sweep 900 RPM with louvers in the existing opening, including making the hole to suit the size of the above fan, making good the damage, connection, testing, commissioning etc. as required. |
| 71 | Supplying, Installation, Testing & Commissioning of 250 mm sweep fresh air-fan, Air Delivery in existing opening/ventilation window i/c cutting of proper size making good the damages i/c earthing & connection with 1.5 Sqmm FRLS PVC copper wire etc. as required. |
| 72 | Supplying, installation, Testing & Commissioning of Panel light 2x2 ft., of following body material and construction as per IS : 10322 with driver as per the requirement with Driver efficiency >85%, Operating voltage AC 140-270 Volt, frequency 50/60 hz, Operating temp range -5 0C to 40 0C, internal surge protection of 2.5 KV with Short & Open circuit protection, THD < 10% , P. F.≥0.95, IP20, CRI >80,UGR (Unified Glare Rating) < 19, Flicker free, (flicker should be below 5 %), life time (LED, Driver & electrical circuitry), of minimum 50000 Burning Hours with, 70% of initial Lumen maintained till life ends as per LM80 extrapolation IES TM-21-11 report, CCT 3000°K /4000°K/ 5700°K /6500°K (As per ANSI Bin), SDCM(Standard Deviation Colour Matching) <3, Maximum power consumption should not more than the specified rating and Fixture shall be of relevant BIS standard. Manufactures Word Mark/ Name Engraved/ Embossing/ Screen printing on housing. complete in allrespect i/c externalconnections with 1.5sqmm FRLS/HFFR, PVCinsulated copper conductor single core cable and earthing etc. as required with Minimum 5 year OEM warranty. System lumen efficacy ≥105 <120 lm/Watt output . LM79 & LM80 Test report and all testing required for LED fixtures as per BIS shall be submitted. Shape size and CCT shall be as approved by Engineer-in-Charge as per requirement. (Thermal management: heat sink of aluminium housing such that LED junction temperature shall not rise above 90°C). Powder Coated CRCA Sheet Body (Thickness > 0.50 mm) 36 watt |
| 73 | Supplying, Installation, Testing and Commissioning of Air Cooled Cassette type Air conditioners complete with Indoor unit(IDU), Out door unit (ODU), R-32/R410A/R-407 Green Refrigerant, wireless Remote, inbuilt drain pump, suitable for 400/230V, 50 Hz ,1 /3 phase AC supply, including surface / concealed copper Refrigerant piping with insulation (closed cell elastomeric nitrile rubber tubular pipe section) upto 5.5 Mtr (IDU to ODU), copper power and control cable upto 5.5 Mtr (IDU to ODU) including drain pipe, the system shall be capable of performing cooling, dehumidification, Air circulation, filtration& ventilation of following capacity with Scroll/rotary compressor with min 5 year Original Equipment Manufacturer (OEM) warranty both compressor and Printed Circuit Board (PCB) as specified. The system shall be able to deliver 100% of the rated capacity as per relevant IS Code. The lab testing reports as per IS: 1391 shall be submitted from National Accreditation Board for Testing and Calibration Laboratories (NABL) accredited as per International Electrotechnical Commission (IEC) 17025 standards/Central Power Research Institute (CPRI)/ Electrical Research and Development Association (ERDA)with Original Equipment Manufacturer (OEM) etc. complete as per CPWD specification and as per IS: 1391 as required. 2.0 TR with 5 Star BEE Rating |
| 74 | 4.0 TR with 5 Star BEE Rating |
| 75 | Supplying, Installation, Testing and Commissioning of Electronic Voltage Stabilizer of Capacity : 4 KVA (Suitable for upto 2 Tr. AC) for Voltage correction, low / high voltage Cut off, overload cut off with automatic reset, fail safe Circuit protection, Main Turn on delay, Wall mounting Cabinet design etc as required. Input Voltage : 140 – 280V ±5% Output Voltage : 200 – 250 V±5% |
| 76 | Providing & fixing of MS powder coated outdoor wall mounting Stand suitable for 2.0/4.0 TR capacity split AC outdoor unit complete as reqd. |
| 77 | Supply, Installation, testing and commissioning including vaccumization and Nitrogen testing of following nominal sizes of soft/hard drawn copper refrigerant piping for Split/VRV/VRF system, complete with fittings, with suitable adjustable ring type hanger supports, jointing/brazing including accessories, insulated with XPLE Class-O tubular insulation/with Class-O/1 closed cell elastometric nitrile rubber tubular sleeves sections of specified thickness as given below for Suction and Liquid lines, all accessories as per specifications etc. as required : 6.4mm dia (OD) with tube thickness 0.80mm with 19 mm thick insulation |
| 78 | 12.7mm dia (OD) with tube thickness 0.80mm with 19 mm thick insulation |
| 79 | Supply and installation of control cum transmission wiring of 3 core x 2.5 sqmm copper Unarmoured in suitable fittings between indoor and outdoor units on surface / conduit / pipe / cable tray / open duct etc. complete as required |
| 80 | Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes,having thermal stability for hot &cold water supply, including all CPVC plain & brass threaded fittings, including fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and testing of joints complete as per direction of Engineer in Charge. 25 mm nominal outer dia Pipes |
| 81 | Supplying and making end termination with brass compression gland and aluminium lugs for following size of PVC insulated and PVC sheathed / XLPE aluminium conductor cable of 1.1 KV grade as required. 3½ X 50 sq. mm (35mm) |
| 82 | Supplying and Laying and fixing of one number PVC insulated and PVC sheathed / XLPE power cable of 1.1 KV grade of following size on cable tray as required. 3.5 x 50 sqmm |
| 83 | Supplying and installing following size of perforated Hot Dipped Galvanised Iron cable tray (Galvanisation thickness not less than 50 microns) with perforation not more than 17.5%, in convenient sections, joined with connectors, suspended from the ceiling with two numbers GI Suspenders i/c base of suitable size GI angle, GI bolts &nuts, fastner etc as required. 100 mm width X 50 mm depth X 1.6 mm thickness |
| 84 | Supplying and installing following size of perforated Hot Dipped Galvanised Iron cable tray \\"bends\\" (galvanisation not less than 50 microns) with perforation not more than 17.5%, in convenient sections, joined with connectors, suspended from the ceiling with two numbers GI Suspenders i/c base of suitable size GI angle, GI bolts &nuts, fastner etc as required. 100 mm width X 50 mm depth X 1.6 mm thickness |
| 85 | Supplying and fixing of 600 mm long nominal size LED batten mirror light fittting made out with aluminium die cast housing and poly carbonate diffuser with all acessories having rating not more than 6 W, system efficacy not less than 100 lm/W, lumens output not less than 1000, CRI>80 complete etc as reqd. |
| 86 | Dismantling & Re-installation of existing installed STAC / WTAC of 1.5 TR & 2.0 TR capacity with outdoor unit from its location to another location, unloading for reinstallation checking for unit, inspection and reconnection of drainage pipe, reconnection and tightening the loose connection, testing the machine etc as reqd. |
| 87 | Supply of High performance 2-way Indoor / Outdoor full range speaker with 6.5” woofer, 1'' tweeter High Frequency driver, Power Handling (AES Standard) 60W RMS / 120W Program / 240W Peak or above, Nominal Impedance 8 ohm, Frequency Response 65Hz –20KHz or better, Average Sensitivity 89dB/W/m or above ,Calculated Max SPL 114dB Peak or better, ete as required. |
| 88 | Supply of Mixer amplifier with Total output all channels driven: 120W, 4-16 ohm, 70V/100V output, USB/Bluetooth Media player, 3 Aux and 2 microphone inputs, Signal-to-Noise Ratio >75dB, toroidal transformer, Master, Bass & Treble controls for tailored audio tuning Aux output available for daisy chaining amplifiers or to attach active subwoofers to expand your audio setupetc as reqd. |
| 89 | Supply of High Performance UHF Digital Wireless Dual Handheld &Lavalier COMBO Microphone System, 200 selectable frequencies, RF Carrier Frequency Range - CH1: 612.000 - 651.600 MHz (100 Selectable Frequencies) CH2: 652.000 - 691.600 MHz (100 Selectable Frequencies), Audio Frequency Range - 30Hz ~ 20 kHz, Signal-to-noise (A-weighted) - 120dB(A) , RF output - 50 mW max, Oscillation Mode -Inside the chip VCO oscillation True Diversity dual reciever, Dual channel 19” one U rack mount receiver with four antennas, One wireless handheld transmitter and one wireless bodypack transmitter with one lavalier& head worn microphone set, etc complete as required. |
| 90 | Supply of 86'' Interactive Touch Display with Panel Technology - IPS/ Direct - LED, Aspect Ratio -16:9, Resolution - 3840 x 2160 - 4k UHD, Brightness* - 350 cd/m2 or above , Inbuilt Memory 4 GB RAM & 32 GB memory, Android: v11.0, CPU : Quad Core, Estimated Life Time: 50000 Hrs (Typical), Viewing Angle (HxV)- 178x178, Touch Technology: Infrared, Touch Point: 20, Response Time: 8ms, Surface Protection: 4mm Thick Touchened Glass, Touch Tools: Finger, Stylus, Glove, Opaque objects, Inputs: 1 x mini AV / 1 x HDMI 2.0, Output: 1 x Coax, 1 x Mini AV, 1 x Earphone Out / 1 x USB-B, 1 x USB-A 2.0, 1x USB-A3.0, 3x USB-A 3.0, 1x USB-B 3.0, 1xUSB-C, 1x RJP45 Input, 1x RJP output, 1 x RS232C, 3 +1 (WiFi + Bluetooth), Expansion: Windows OPS: Intel Statandard 80 Pin OPS, With suitable OPS, all the offered solution It should be a single oem Solution, etc complete as required. |
| 91 | Supplying Installation Testing and Commissioning of PTZ (Pan,Tilt and Zoom) IP IR Camera having following specifications and features etc :- PTZ (Pan,Tilt and Zoom) IP IR Camera having following specifications and features etc :-1) IP IR PTZ Camera: Motorized PAN TILT ZOOM with IR2) Image Sensor: 1/2.8\\" or better progressive Scan CMOS3)Signal System: PAL/NTSC4) Minimum Illumination: 0.008 Lux@ F1.6, AGC ON,0 lux with IR, or better 5) Imaging: 1/1s to 1/30000s, Auto Gain Control , White Balance- Auto, Back Light Compensation, Image Rotation, Multi zone Privacy Masking (Upto 24 Area), HLC, Defog, Region Of Interest and EIS features. 6) On Screen Display: Camera should display Camera title, Date & Time in live & recorded video both. 7) Signal to Noise Ratio: > 50 dB 8) Event Notification: Through Relays, E-Mails or FTP9) Day & Night: True Day & Night High Performance Mechanical IR cut filter with auto switch, IR Source- Inbuilt IR LED's with effective distance. The camera should have IR LED’s and cover distance up to 300 meter or above.10) Auto Tracking: The camera should be equipped with Deep-learning-based auto tracking function using simultaneously all of the panning, tilting and zooming should be available. When a motion is detected in a registered monitoring area, the camera should track the motion (object) and capture it.11) Pre/Post Event Buffering: The camera should support atleast of 5 seconds of pre & post event buffering.12) Presets: 300 Presets13) Video Compression (Minimum): H.265 or better, H.264, Audio:- G.711U/A, G.711Mu, G.726, AAC, G.72314) Wide Dynamic Range: WDR (120dB or more), HLC & BLC15) Digital Noise Reduction: DNR (2D+3D) On/Off16) Image Setting: Rotate Mode, ROI ,EIS, Defog, saturation, brightness, contrast, sharpness adjustable through client software or web browser17) Profile Management: User configuration import, export18) Cyber Security: Configuration encryption, AES 256-bit Encryption, Digest, account lockout, video encryption, IP/MAC filtering, trusted boot, trusted upgrade, trusted execution 19) Onboard Storage: Camera should support built in Micro SD/SDHC/SDXC Card slot upto 512 GB . It should be supplied with minimum 128GB Memory.20) Recording Management: Format SD, overwrite, storage management, video to NAS device, remote archive access via FTP login.21) Edge based Video Analytics & Alarm Trigger: Motion/tampering detection; network disconnection detection; IP conflict detection; memory card state detection; memory space detection, Tripwire, Intrusion, Object Abandon/ Missing, SMD, Face Detection.22) Network Protocol: SFTP, IPv6, IPv4, DNS,NTP, HTTP, HTTPS, SNMP, TCP/IP, PPPoE, NFS, ICMP, DHCP, SMTP, RTSPS.23) System Capability: ONVIF Profile S, G & T. CCTV Camera OEM should be fulltime member of ONVIF and quoted models should be listed on ONVIF official website (All the certifications & Credentials should be valid on the date of technical evaluation).24) VMS: Camera shall support open source VMS25) Connectivity: 1x LAN RJ-45 (10/100Base-T)26) Audio Support: Audio Interface : The camera should have 1/1 Audio In/Out to connect External Mic and Speaker Audio Compression : PCM, G.711U/A, G.711MU, G.726, MPEG2-Layer2, G.722.127) Alarm In/Out : Alarm In/out- 7/2 Ch In/Out28) Power Input: The camera should support simultaneous dual power input—DC/ AC (via power adapter) and PoE (802.3af)—to ensure continuous operation in the event of a failure in one power source.29) Power Requirement: 24 VDC, 2.5 A (± 25%), PoE+ (802.3at)30) Enclosure & Weather Proof Standard: IP67 weather proof and IK10, TVS 8000V lightning proof, surge protection, voltage transient protection.31) Operating Condition: - Ambient Temperature: - (-)05°C to 50°C, humidity 95% (max) (non-condensing)32) IR life: 40000 hours or higher33) Video Bit rate: 32 KBPS - 8 MBPS or better34) Standards: BIS with ER, STQC Certified, CE, FCC and RoHS5MP IP IR motorized PTZ @25/30fps or better camera, Triple streaming, configurable on resolution:- Main stream: 5MP@25/30 fps Sub streams:1080p@25/30 fps, varifocal lens 3.95mm (±5mm) ~ 177.75mm (±5mm) or better with Automatic & manual Focus Adjustment provisions, 45x Optical zoom and 16x Digital zoom with angle of view H: 65.7°–1.9°V: 39.4°–1.1°D: 73.1°–2.1, PAN Travel: Pan: 0° ~ 360° endless,Manual Pan: 260°/s, Preset : 300°/s, Tilt Travel: Tilt: -20° ~ 90°, auto flip 180°, Manual Tilt: 120°/s, Preset : 200°/s |
| 92 | Supply of USB Based Speaker phone: Anti-fouling and flameretardant, should be IP7 waterproof coating which should effectively prevent water splashing. Should have Built-in 4-microphone array structure, It should have 360-degree omni directional pickup, should support Pickup radius of 6 meters, should support Full-duplex deep echo cancellation with more than 65 DB. Should have Echo cancellation length ≥500ms, 48k wide band voice call HD technology, Intelligent mixing, dynamic noise suppression, Automatic direction-finding technology, automatic gain technology. It should have Line In, 3.5 mm analog interface to connect mobile phone, video conference terminal and other devices that do not support USB. The speaker system should adopts multi-core digital unit and should have volume upto85dB 16- level speaker volume with digital adjustment.; Should have Acoustic echo cancellation (AEC) depth65dB, Should have Echo length ≥500ms, Should have Two - way noise compression below25dB, Should have Automatic Direction finding technology of intelligent microphone, Should have Automatic gain control technology, Should have Microphone Frequency Response : 100HZ-22KHZ , Speaker Frequency Response : 100HZ-22KHZ,Speaker Volume : Maximum87dB; Pickup range: 6M & 360°, The Main Microphone should have Line In/Out with 3.5mm audio in/out interface , RJ45 Network Port to connect extended microphone ,USB Interface Type B audio in/out interface, Power switch, 4 Microphones, 15 Watt Speaker, Volume button Decrease/Increase Volume , Bluetooth button Turn On/Off Bluetooth , Off/On hook button, Microphone mute button to Turn On/Off microphone; Bluetooth Yes, Built-in battery : Built-in 5200mA battery, working duration more than 8 hours. Standby time 90 days, USB: Same USB port for PC/Laptop connectivity and Power; The Expansion Microphone shall be connected through daisy chain method with main unit and should have RJ45 network port to connect with main microphone and should draw power too from the main complete etc as reqd. |
| 93 | Supply of 18U pre-wired Audio Equipment’s Rack front lockable glass door, fan tray for cooling, caster wheels base, main panel with spike buster, individual fuse power supply unit, including all internal wiring, etc as required. |
| 94 | SITC of HDMI-to-HDMI cable 15 Mtr etc. as reqd. |
| 95 | SITC of HDMI-to-HDMI cable 5 Mtr etc. as reqd. |
| 96 | Supply of Microphone lines high grade, professional low-noise, 2 core high conductivity PVC insulated in PVC jacket, shielded copper cable with Di- electric insulator both end with XLR m/f connector as required. |
| 97 | Supplying and drawing of cable Fire Retardant PVC insulated copper conductor cable in the existing surface / recessed steel conduit of following pairs, cores and size including connections and interconnections etc. as required. speaker cable Two pair, 2-core, 1.5 sq. mm |
| 98 | Dismantling of existing wire, fans, fittings, conduits & other related accessories from its location to another location i/c credit of dismantled material etc complete as reqd. (Credit for fan, LED fitting & Air Conditioners is not considered) Please Enable Macros to View BoQ information |
| SR No | FileName | File Description |
| 1 | Click here to download tender document | Tender Documents |
| 2 | Click here to download tender document | Tender Documents |
| 3 | Click here to download tender document | Tender Documents |
We are a group of professionals specializing in custom software development, web development, mobile app development, IOT base solutions, web design, graphics & Enterprise solutions provid.
Copyright © 2026 · All Rights Reserved. Terms of Usage | Privacy Policy
For Tender Information Services Visit : TenderDetail
