|
| 1 | DISMANTLING DEMOLISHING & REPAIRS WORK Crack filler for plasters, IPS, cement sand screeds and non – structural cracks. Do Not open the cracks, Clean the cracks so as to free them from oil, dust, loose particles etc.Moisten the surface with water, Fill cracks with EPCO – ACR using spatula or a putty knife. While applying avoid formation of cavity or bubbles. After filling , allow the surface to dry for at least 24 hours. Apply in layers at 24 hours interval. If the depth of the crack is more than 10mm. incl. cost of scaffolding transport etc. as per dir of EIC. All the chemicals will be of Krishna Conchem Products Pvt. Ltd. or Equivalent. |
| 2 | Repairs to plaster in patches of 2.5 sq.m. & under including cutting the patch in proper shape & preparing & plastering the surface of the walls complete including disposal of rubbish to the dumping ground within 50m lead, With cement mortar 1:4 (1 cement : 4 fine sand) |
| 3 | Dismantling old plaster or skirting raking out joints and cleaning the surface for plaster including disposal of rubbish to the dumping ground within 50 mts. lead. |
| 4 | Dismantling cement asbestos celotex or other ceiling or partition hard broad wall including stacking of serviceable materials and disposal of unserviceable materials within 50 mts. lead. |
| 5 | Dismantling the tile & stone work in all thickness in floors laid in single /multiple layers (ceramic/mosaic/kotha or any other flooring etc) in cement /adhesive as case may be including stacking of dismantled materials within 50 Meters lead etc complete. Note :- Single plan area for (ceramic +misaic + any other flooring) will be considered for payment. |
| 6 | Scraping of existing Neeru/POP /wall putty from the wall /ceiling surface so as to expose the existing plaster including disposal of all rubbish /dust created at all leads and lift as directed by Engineer |
| 7 | Dismantling the existing light, fan, bell, clock, independent plug point, wiring including circuit mains of all types along with accessories etc. complete as per specification no. WG-DM/PW |
| 8 | Dismantling the existing Telephone / Lan / Wan / TV cables and wires of all sizes along with casing-capping / conduit complete as per specification No: WG-DM/PW |
| 9 | Dismantling the existing Aluminium/copper mains,submains wiring upto 10 sq.mm. along with accessories etc.Complete as per specification No: WG-DM/PW |
| 10 | PLASTERING AND FINISHING WORKS12mm cement plaster 1:4 (1 cement : 4 fine sand) |
| 11 | Removing white or colour wash by scrapping, sand papering & preparing surface smooth including necessary repairs to scratches etc. complete |
| 12 | Providing & applying white cement based putty of average thickness 1.00mm of approved brand & manufacturer, over the plastered wall surface to prepare the surface even & smooth complete |
| 13 | Applying one coat of distemper primer of approved brand & manufacture on wall surface |
| 14 | Wall painting (two or more coats) with plastic emulsion paint of approved brand & manufacture on new work to give an even shade |
| 15 | Applying priming coat with ready mixed primer of approved brand & manufacture on wood work complete |
| 16 | Applying priming coat with ready mixed primer of approved brand & manufacture on steel work |
| 17 | Painting one or more coats with superior quality ready mixed paint of steel work of approved brand & manufacture in all shades on old work to give an even shade |
| 18 | Painting one or more coats with superior quality ready mixed paint of wood work of approved brand & manufacture in all shades on old work to give an even shade. |
| 19 | Painting three or more coats with acryllic exterior paint of approved brand & manufacture (such as weather shield, Apex) including applying one coat of cement primer & one coat of surface treatment etc. complete, At all heights from ground level |
| 20 | FLOORING AND FLOOR FINISHESProviding & fixing Vinyl flooring of approved shade & design with adhesive complete |
| 21 | Providing and laying engineered wooden floor skirting of height 75mm of approved make (armstrong/ ego ) laid as shown in drawing including adhesive also includes in the item.the item also include levelling with plaster of paris if required & as per instruction of engineer in charge. |
| 22 | WOOD WORK Providing & fixing in partition 4 mm thick with Marine plywood of approved quality including fixing in frames with brass screws etc. complete with 50 x 12 mm First class Indian teak wood beading (frame to be paid separately) |
| 23 | Providing woodwork in frames of false ceiling, partitions etc. Sawn 7 put up in locationa. Second class matti wood |
| 24 | Providing & fixing 12 mm thick frameless toughened glass door shutter of approved brand & manufacture, including providing & fixing top & bottom pivot & spring type fixing arrangement & making necessary holes etc. for fixing required door fittings, all complete as per direction of Engineer (Door handle, lock & stopper etc.to be paid separately) |
| 25 | Providing & fixing Stainless Steel tubular lever DType mortise handles with round/Square nose, 24mm Mortise/sash lock body & Strike plate (all SS Finish), Pin cylinder 60mm with one side key and other side knob/thumb turn with necessary screws etc. complete |
| 26 | Providing & fixing Stainless steel D type handles with necessary screws etc complete a) L 300mm/325mm x 22 to 25mm dia |
| 27 | MISCELLANEOUS WORKSProviding anti – termite treatment to buildings conforming to I.S.S. 6113 part II 1971 (revised) including adopting precautions for health hazards and safety measures as required therein with the cost of all materials, chemicals, plants, equipments required for the treatment and furnishing a guarantee for a minimum period of 10 years from the date of completion including eradicating any infestation of termite free of cost during the guaranty period complete. (The payment will be made on plinth of the building : Post construction |
| 28 | Supplying & erecting Carbon Dioxide (CO2) fire extinguisher of 4.5 kg. capacity cartridge type conform to IS 2878 /15683 complete erected with necessary clamp made from 50 x 6 mm. M. S. flat with nut & bolts routed in wall complete |
| 29 | ELECTRICAL WORKSINTERNAL WIRINGWiring for light point/fan point/exhaust fan point/call bell point with 1.5sq.mm FRLS PVC insulated copper conductor single core cable in surface PVC conduit (medium) with modular switch, modular plates, suitable size modular GI box of specified category & earthing the point with 1.5 sq.mm FRLS PVC insulated copper conductor single core cable etc. as required(f) Group C -- with Cat B Modular Accessories |
| 30 | Wiring for circuit/submain wiring along with earth wire with the following sizes of FRLS PVC insulated copper conductor single core cable in the independent surface PVC(medium) conduit of appropriate size as required(a) 2 x 1.5 sq.mm + 1 x 1.5 sq.mm earthwire (20mm Conduit) |
| 31 | Wiring for circuit/submain wiring along with earth wire with the following sizes of FRLS PVC insulated copper conductor single core cable in the independent surface PVC(medium) conduit of appropriate size as required(b) 2 x 2.5 sq.mm + 1 x 2.5 sq.mm earthwire (20mm Conduit) |
| 32 | Wiring for circuit/submain wiring along with earth wire with the following sizes of FRLS PVC insulated copper conductor single core cable in the independent surface PVC(medium) conduit of appropriate size as required(c) 2 x 4 sq.mm + 1 x 4 sq.mm earthwire (20mm Conduit) |
| 33 | Wiring for group controlled light point/fan point/exhaust fan point/call bell point with 1.5 sq.mm FRLS PVC insulated copper conductor single core cable in surface PVC conduit (medium) & earthing the point with 1.5 sq.mm FRLS PVC insulated copper conductor single core cable etc. as required |
| 34 | Supplying & fixing following modular switch/socket on the existing modular plate & switch box including connections but excluding modular plate etc. as required(a) 5/6 A switch Cat A |
| 35 | Supplying & fixing following modular switch/socket on the existing modular plate & switch box including connections but excluding modular plate etc. as required(c) 15/16 A switch Cat A |
| 36 | Supplying & fixing following modular switch/socket on the existing modular plate & switch box including connections but excluding modular plate etc. as required(d) 3 pin 5/6 A socket outlet Cat A |
| 37 | Supplying & fixing following modular switch/socket on the existing modular plate & switch box including connections but excluding modular plate etc. as required(e) 6 pin 15/16 A socket outlet Cat A |
| 38 | Supplying & fixing following modular switch/socket on the existing modular plate & switch box including connections but excluding modular plate etc. as required(f) Telephone socket outlet Cat A |
| 39 | Supplying & fixing stepped type electronic fan regulator on the existing modular plate switch box including connections but excluding modular plate etc. as required (b) Cat B |
| 40 | Supplying & fixing modular blanking plate on the existing modular plate switch box excluding modular plate etc. as required(b) Cat B |
| 41 | Supplying & fixing following size modular GI box along with modular base & cover plate for modulator switches in recess etc. as required(a) 1 or 2 Module (75 mm x 75 mm) Cat A |
| 42 | Supplying & fixing following size modular GI box along with modular base & cover plate for modulator switches in recess etc. as required(b) 4 Module (125 mm x 7 mm) Cat A |
| 43 | Supplying & fixing following size modular GI box along with modular base & cover plate for modulator switches in recess etc. as required(c) 6 Module (200mm x 75 mm) Cat A |
| 44 | Supplying & fixing following size modular GI box along with modular base & cover plate for modulator switches in recess etc. as required(d) 8 Module (125mm x 125 mm) Cat A |
| 45 | Supply and erecting meter box suitable for three phase energy meter and incoming SP/DP MCB, fabricated out of 16 SWG sheet steel, powder coated, complete as required and conforming to the requirements of Goa Electricity Department. |
| 46 | Supply, installation, testing and commissioning of electronic type three phase energy meter (KWh), 4 wire, ISI marked, in polycarbonate or sgheet steel body ( base mounting type) with counter display/LCD display, with ELT, in Class 1.0, 50 Hz, 240 V. AC duly tested by MRT along with Test Certificates, complete as required of following capacity of make L & T only.(b) 10 to 40 A |
| 47 | TELEPHONE & DATA NETWORKINGSupplying & fixing of following sizes of rigid PVC conduit along with accessories in surface(medium)/recess(heavy) including cutting the wall & making good the same in case of recessed conduit as required(b) 25 mm |
| 48 | Supplying & drawing/fixing indoor type 0.5 sq.mm FR PVC insulated copper conductor unarmoured telephone cable ITD/DOT approved, with GI saddles on wall or in the existing surface/recesed steel/PVC conduit having folowing pair(s), complete as required(a) 2 Pair |
| 49 | Supplying & drawing of Cat - 6 UTP, 4 pair annealed tinned copper conductor PVC insulated, PVC sheathed, unarmoured data cable in existing surface/recessed steel/PVC conduit of appropriate size including connection, etc. complete as required(a) Cat 6 |
| 50 | Supplying, installation & testing of suitable size modular GI box , modular plate & cover complete with RJ-45 connector (modular LAN socket TX1000/ CAT6) including concealed metal box/surface GI/PVC Box, modular plate, punching, identifying, complete as required(b) Cat B |
| 51 | DB & MCBSupplying & fixing following way SPN sheet steel MCB distribution board 240 V on surface/recess complete with tinned copper busbar neutral busbar earth bar dinnbar detachable gland plate interconnections phosphotized & powder painted including earthing etc. as required (but without MCB/RCCB/Isolator)(g) 12 way double door Cat A |
| 52 | Supplying & fixing 6 A to 32 A, C series MCB suitable for lighting & other loads of following poles in the existing MCB DB complete with connections testing & commissioning etc as required(f) SP, Cat B |
| 53 | Supplying & fixing 6 A to 32 A, C series MCB suitable for lighting & other loads of following poles in the existing MCB DB complete with connections testing & commissioning etc as required(g) SPN, Cat B |
| 54 | Supplying & fixing 6 A to 32 A, C series MCB suitable for lighting & other loads of following poles in the existing MCB DB complete with connections testing & commissioning etc as required(h) DP, Cat B |
| 55 | Supplying & fixing 6 A to 32 A, C series MCB suitable for lighting & other loads of following poles in the existing MCB DB complete with connections testing & commissioning etc as required(j) TPN, Cat B |
| 56 | LIGHT FIXTURE & FANSSupplying & erecting LED square/circular Max. 14 W down lighter/Panel Light having pressure die-cast aluminium housing, polystyrene diffuser having system lumens output of Min. 1500 Lumens, min. efficacy of 110 lumen/W, CRI>80, CCT upto 6500K, Beam Angle of 120 deg., max. ripple of 5%, THD<10%, p.f. >0.95, operating range of 120-270V, surge protection of 2.5 kV, Life class of 50,000 Hrs at L70B50 including driver, having mounting arrangement with board for surface type or spring loaded mounting clips complete with minimum 2 years warranty as per specification No. FG-IDF/LED |
| 57 | Supply & fixing 5W 4000 K 2054 270 LUMEN OUTPUT HAVELLS LED LIGHT |
| 58 | Supplying and erecting Energy Saving BLDC Ceiling fan 230 V A.C. 50 cycles 1200 mm, Max. Energy Consumption of 28W having service ratio (CMM/W) of Min. 8 , PF>0.9, THD<10% with IR remote control, Temperature Rise of Max. 40 deg.C, having external mounted control PCB completely erected in position as per specification no. FG-FN/CF |
| 59 | Supply & erecting fan hook box (100 mm diameter or equivalent square size, 75mm deep) fabricated out of 16 SWG sheet steel with 10 m round bar hook bounded to RCC steel upto 50 mm length protruding on each side of the box, including painting with 2 coats of red oxide, complete as required |
| 60 | Supplying & erecting ‘B’ grade G.I. pipe / M.S. pipe down rod duly painted for fan complete erected with PVC three core flexible cable 1 sq. mm copper PVC wire |
| 61 | HVACSupplying, installing, testing & commissioning split type variable speed inverter technology with minimum 3 to 1 convertible mode for compressor, room air conditioning unit 1.3TR to 1.6TR capacity having ISEER minimum 3.8 to maximum 4.39 suitable to operate on 250V, 50 Hz, A.C. supply having 1 no of air handling unit hi-wall/floor mounting type complete with refrigerant R32 having copper condenser, minimum 2.5PM filter, self diagnosis feature, stabilizer free operation & temperature display on indoor unit, noise level maximum 50dBA at position as per specification no. APAC/ SAC |
| 62 | Supplying, installing, testing & commissioning split type variable speed inverter technology with minimum 3 to 1 convertible mode for compressor, room air conditioning unit 1.7TR to 2.0TR capacity having ISEER minimum 3.8 to maximum 4.39 suitable to operate on 250V, 50 Hz, A.C. supply having 1 no of air handling unit hi-wall/floor mounting type complete with refrigerant R32 having copper condenser, minimum 2.5PM filter, self diagnosis feature, stabilizer free operation & temperature display on indoor unit, noise level maximum 50dBA at position as per specification no. APAC/ SAC |
| 63 | Providing annual comprehensive maintenance contract for 1.5 TR split/window air conditioning unit complete as per terms and conditions. Job includes 1) quarterly servicing 2) on call repair 3) replacement of all spares within 24 hours 4) sending standby manpower for VIP movement. The job exclude sheet metal work and plastic material. |
| 64 | Providing annual comprehensive maintenance contract for 2 TR split/window air conditioning unit complete as per terms and conditions. Job includes 1) quarterly servicing 2) on call repair 3) replacement of all spares within 24 hours 4) sending standby manpower for VIP movement. The job exclude sheet metal work and plastic material. |
| 65 | Carrying out core cutting of size 3\\" to 5\\" dia x 15\\" length in the C.C./rock/stone wall with the help of specialized core cutting machine in proper manner & finishing the site as original |
| 66 | Supplying, laying/fixing, testing & commissioning of appropriate nominal refrigerant copper pipe of 12.7mm dia (OD) for liquid line/suction line supply & return piping of suitable gauge (hard copper pipe for liquid main line & soft copper pipe for refrigerant) along with necessary supports, hangers, clamps, vibration isolators & fittings such as bends, tees, valves, gauges, strainers with insulation of 19mm thick elastomeric nitrile rubber along with application of multicoating of VRV/VRF piping for protection against mechanical damages, fungal growth, flame spread, water permeance & ultraviolet radiations withOEM standards of VRV/VRF air conditioning system complete |
| 67 | Supplying, laying/fixing, testing & commissioning of appropriate nominal refrigerant copper pipe of 9.5 mm dia (OD) for liquid line/suction line supply & return piping of suitable gauge (hard copper pipe for liquid main line and soft copper pipe for refrigerant) along with necessary supports, hangers, clamps, vibration isolators & fittings such as bends, tees, valves, gauges, strainers with insulation of 19mm thick elastomeric nitrile rubber along with application of multicoating of VRV/VRF piping for protection against mechanical damages, fungal growth, flame spread, water permeance & ultraviolet radiations withOEM standards of VRV/VRF air conditioning system complete |
| 68 | Supplying and erecting slotted angles, frames ect. For panel board or any other purposes complete with bending, cutting, drilling and welding complete erected at the position with necessary materials duly painted with one coat of red oxide and two coats of enamel paint to match the switchgears or as per directions by the site engineer. |
| 69 | Supplying, installing, testing and commissioning of 2500 VA Digital pure sine wave inverter based on Insulated Gate Bipolar Transistor (IGBT) technology single phase 230V,50 Hz complete as per specification no. AP-INV (Without batteries) |
| 70 | Supplying and erecting 12 V/200Ah Tubular battery with battery terminal wire, duly charged complete with 36 months warranty complete |
| 71 | INTERIORS, FURNITURE WORKS & ASTHETICSBOOK RACK WITH BAY SITTING : Providing, fabricating & installing a storage rack of 400MM depth in position which is fully made out of 19mm thk BWP 710 marine plywood except back which is made out of 6mm thk BWP marine plywood 710. All exposed surfaces finished with 1.0mm thk laminate of approved shade. All inside surfaces which are unseen to be finished with 0.7mm thk white laminate. The storage has to be covered with framed glass, properly hinged at the supports. All exposed edges to be finished with TW beading patti (min 10mm) finished with French polish (Min 3 Coats). Shutters fitted with SS hinges, Multipurpose lock, heavy duty brushed stainless steel 'D' Handles (6\\") etc. Multipurpose lock, Handles etc. complete as per drawing.Providing & fixing soft furnishing 2\\" PU foam sheet, further covered with velvet fabric as per design shown in render having 25000 & above martindel, finally screwed on 12mm thk ply |
| 72 | VERTCAL BOOK STORAGE: Providing, fabricating & installing a storage rack of 400MM depth in position made out of 19mm thk BWP 710 marine plywood except back which is made out of 6mm thk BWP 710 marine plywood. All Exposed surfaces finished with 1.0mm thk Laminate of approved shade, All inside surfaces to be finished with 0.7mm thk white laminate. The storage has to be covered with framed glass, properly hinged at the supports. All exposed edges to be finished with TW beading patty (min 10mm) finished with French polish (Min 3 Coats). All inner surfaces seen inside glass door should be finished with 1.00mm Laminate. Shutters fitted with SS hinges, Multipurpose lock, heavy duty brushed stainless steel 'D' Handles (6\\") etc. Multipurpose lock, Handles etc. complete as per drawing |
| 73 | STORAGE CUPBORD - : Providing, fabricating & installing storage cupbord of L 1500MM, H 750MM & W 400MM in position made out of 18mm thk prelaminated particle board with 2mm pvc edge bending. Shutters fitted with SS hinges, Multipurpose lock, heavy duty brushed stainless steel 'D' Handles (6\\") etc. Multipurpose lock, Handles etc. complete as per drawing |
| 74 | BOOKCASE STORAGE CUM CHAIR -: Providing, fabricating & placing a customised chair made up of 19mm/6mm BWP 710 plywood finished with white duco paint of approved brand & make, further 40 kg/m3 density PU foam covered with velvet fabric having 25000 & above martindel |
| 75 | SEMICIRCULAR BOOKCASE STORAGE CUM SITTING - 1 nos: Providing, fabricating & placing customised sitting with book storage made up of 19mm/6mm BWP 710 plywood using flexible/6mm ply, further finished with 4/6mm thk MDF finished with 1mm laminate as per design to achive desired shape. Also further 40 kg/m3 density PU foam covered with velvet fabric having 25000 & above martindel |
| 76 | WORK STATION TABLE : Providing, fabricating & placing in position computer table of L 900MM, H 750MM & W 600MM made with 18mm Prelaminated particle board with 2mm edge bending. All tables should have inbuilt CPU trolley or CPU hanger, Wire Manager & key board tray of standard size |
| 77 | RECEPTION TABLE : Providing, fabricating & placing in position reception table L 1500MM, H 750MM & W 800MMmade with 18mm Prelaminated particle board with 2mm edge bending with all necessary hardware. |
| 78 | FLOATING SITTING : Providing, fabricating & installing sitting space of 700MM width & H 400MM - over MS section RHS 80x40x3mm thk with seating top made up of 12mm BWP 710 marine plywood with edge profile 38mm running all around, finished with 1mm thk wooden laminate, complete with necessary hardware |
| 79 | Conferrence Room Floating Sitting Mattress : Providing & fixing soft furnishing 2\\" PU foam sheet, further covered with velvet fabric as per design shown in render having 25000 & above martindel, finally screwed on 12mm thk ply |
| 80 | TABLE WITH ROLLERS : Providing, fabricating & installing in position working table with rollers of L 1028MM, W 741MM made up of woden legs 3\\"x 3\\" second class matti wood with top made up of 710 19mm BWP plywood with edge profile 38mm running all around, table legs finished with duco & table top finished with 1mm solid colour laminate, complete with necessary hardware |
| 81 | Providing & fixing cement board 12mm thk for panelling of existing Door closing including frame work if necessary, with required hardware etc. complete |
| 82 | 16\\"x16\\" CUSIONS : Providing & placing in position cushions filled with hollw micro fiber fillings maintaining the asthetics of the design, further cushions covered with fabric of 250 GSM |
| 83 | 2 SEATER SOFA : Providing & placing in position 2\\" seater sofa 1270Lx760Dx710H of hardwood frame PU foam of 32kg/m3 density placed on webbing belt, further covered with velvet fabric as per design shown in render having 25000 rubs & above martindel |
| 84 | ACCENT CHAIR : Seating ht 490mm, ht of chair 860mm, width of chair 600mm, covered with 4\\" thk PU foam which is further covered with swed fabric having minimum martindel of 25000 rubs & framed consisting of solid hard wood & SS legs |
| 85 | ROLLER BLINDS : Providing & fixing in position roller blinds of approved make, colour, shade of varying length, approved fabric with aluminium extruded rail powder coated in white. Control unit to be made of high strength reinforced plastic. Roller tube to be anodised extruded tube of high strength alloy, including all necessary fittings & fixtures like idler, head rail, control unit, roller tube, bottom rail, operating chain, fixing brackets, clamps, etc. complete. All the materials shall be of approved make. All works complete as per the drawing /image, specs & direction of the engineer in charge |
| 86 | PARTLY GLASS PANELLED & PARTLY SOLID PARTITION WITH LAMINATE FINISH AND GLASS DOOR: L 9490MM x H 2440MMProviding & fixing in position, full height partly glass panelled & partly solid partition made of treated salwood framework of size 38mm x 50mm having grid spacing at 600mm x 600mm centre to centre both ways & covered with 12mm thick Marine BWP plywood on both sides of framework & finished with 1mm thick laminate of approved color & texture. The framework shall be properly screwed to the walls, ceiling & floor & plywood shall be screwed to the framework. The space between the framework grid shall be filled with glass wool for sound insulation. The partition will have an opening as per the height specified in the drawing. Glass of thickness 12mm will be fixed in the opening with wooden beading of size 38mm x 12mm on both sides. Wooden beadings will be finished in 3 or more coats of melamine polish (glossy/matt) including final coat of buffing till the required finish is achieved. All hifdden framework to be painted with black japan paint.Glass door shall be made using 12mm thick toughened glass with 100mm high plywood frame with laminate finish, fixed using double action floor spring, top patch, bottom pivot in SS brush finish & SS 304 grade handles of size 200mm. Provision shall be made for necessary cutouts for services such as wire management etc. as per design including all necessary hardware & accessories, grooves, adhesives, cutting & making good the original surfaces on completion. All material shall be of approved make. Al works complete as per the drawing, specs & direction in charge. |
| 87 | Providing & fixing powder coated aluminium slidding or fixed partition where shutters are made up of 2 vertical members & 2 horizontal members (vertical members 45x45x18 gauge & horizantal top member 45x45x18 gauge & bottom member 115x45x18 gauge) mounted on slidding channel fixed to ceiling and with a gider fixed on the floor to avoid sway, finished with georgean bar as per drawing 5mm glass lock & handles of approved make & brand. |
| 88 | Providing & fixing anodized aluminium shutters in accordance with the specification annexed with Goa schedule of Rates (2004) Vol & II including all taxes, transportation, scaffolding & handling etc. complete as per direction of the Engineer-incharge: Fixed partitions b) Plain plate glass |
| 89 | HIGH BACK CHAIRS : Providing & placing in position high back chairs having head rest with 100% polyester fabric, derived BIFMA Compliant, knee tilt syncro 4 mechanism, Adjsutable External lumbar support, Nylon base with PU castors, class 3 DIN gas lift, height adjustable arm rest complete with all necessary hardware. HBC |
| 90 | WORK STATION CHAIRS : Providing & placing in position workstation chairs with medium back with mesh/ HR Foam seat, derived BIFMA Compliant, syncro 4 mechanism, Nylon base with PU castors, class 3 DIN gas lift, height adjustable arm rest complete with all necessary hardware. WC |
| 91 | Providing & fixing 15mm thick densified tengular edged eco friendly light weight Calcium Silicate false ceiling tiles (like Aerolite Brand or Equivalent) of approved texture Spintone/ Cosmos/ Fine Fissured or equivalent of size 595mm x 595mm in true horizontal level, suspended on inter locking metal grid of hot dipped galvanized steel sections (galvanizing @ 120 grams per square metre. including both side) consisting of main \\"T\\" runner suitably spaced at joints to get required length and of size 24x38mm made from 0.33mm thick (minium) sheet, spaced 1200mm center to center, & cross \\"T\\" of size 24x28mm made of 0.33mm thick (Minimum) sheet to be inter locked at middle of the 1200x600mm panel to from grid of size on a Perimeter wall angle precoated steel of size 600x600mm, resting on periphery walls/ partitions (24x24x300mm) made of 0.40mm thick (minimum) sheet with the help of rawl plugs at 450mm & laying 15mm thick densified edges calcium silicate ceiling tiles of approved texture light fittings, fixture, smoke detectors etc., wherever required. Main \\"T\\" runners to be suspended from ceiling using G.I. slotted cleats of size 25x35x1.6mm fixed to celing using with 12.5mm dia & 50mm long dash fastners, level clips of size 85x30x0.8mm, spaced at 1200mm center to center along main \\"T\\" bottom exposed with 24mm of T-section shall be prepainted with polyester baked paint, for all heights, as per specifications, drawings etc. complete. |
| 92 | GREEN PLANTER : Supplying & fixing in position approved artificial Green plant with PVC pot (pot size around 400mm dia x 600mm height). All the material shall be of approved make. All works complete as per the drawing, specs, image & direction of the site incharge |
| 93 | STAINLESS STEEL DUSTBIN : Providing & placing in position 16 gauge pedal stainless steel dust bin of Grade 304 cylindrical with cover (300mm dia x 650mm ht). All material shall be of approved make. All works complete as per the drawing, specs, image & direction of the site incharge |
| 94 | PICTURE FRAME : Supplying & fixing in position approved canvas painting with synthetic frame & lamination. The details need to be as per the instructions of Engineer in charge. All material shall be of approved make. All works complete as per the drawing, specs, image & direction of the site incharge, Size 600mm x 1500mm |
| 95 | NOTICE BOARD : Supplying & fixing in popsition Notice Board of size L 1200mm x H 900mm made of Aluminium frame with Acrylic shutter including 12mm thick soft board with blazer cloth top fixed in frame with clip fitting with all stainless steel hardwares such screws, lockong arrangements etc. & making arrangements for fixing on wall all complete as per design. All material shall be of approved make. All works complete as per the drawing, specs, image & direction of the site incharge, |
| 96 | WALL CLOCK : Supply & fixing in position approved make, approved colour wall clock circular or square (min one side 250mm) quartz with bold numbers, 3 hands. |
| 97 | Aesthetic Item to showcase the Local, National or State Theme. Frames of sizes: 600mm x 600mm - cultural kavi art drawings |
| 98 | Window Double Patti : Providing, fabricating & installing window frame patti with 12mm thk BWP 710 marine plywood finished with 1.0mm thk Laminate of approved shade |
| 99 | Wall Single Patti : Providing, fabricating & installing window frame patti with 12mm thk BWP 710 marine plywood finished with 1.0mm thk Laminate of approved shade |
| 100 | D-Library Entrance Name Plate : Providing & fixing Acrylic Board name plate at the entrance |
| 101 | Sinages : Providing & fixing Foam Board made sinages |
| 102 | AC Panelling : Providing, fabricating & installing panelling for AC, in position made out of 19mm thk BWP 710 marine plywood front panel fixed on grid finished with 1.0mm thk Laminate of approved shade and brand Please Enable Macros to View BoQ information |