|
| 1 | Earth work in excavation by mechanical means (Hydraulic excavator) / manual means in foundation trenches or drains (not exceeding 1.5 m in width or 10 sqm on plan) including dressing of sides and ramming of bottoms, lift upto 1.5 m,including getting out the excavated soil and disposal of surplus excavated soil as directed, within a lead of 50 m. -All kinds of soil |
| 2 | Providing and laying dry flat brick flooring in required pattern complete. |
| 3 | Supplying and filling in plinth, under floor, foundations etc.with sand (fine) from local quarry with all lifts including spreading in horizontal layers, watering, grading to required slope, ramming, consolidating and compacting each layer by using plate compactor or by any suitable method complete. |
| 4 | Providing and laying in position cement concrete of specified grade excluding the cost of centring and shuttering --All work upto plinth level:1:3:6 ( 1 Cement: 3 fine sand : 6 graded well burntbrick aggregate 20 mm nominal size) |
| 5 | First class brick work in foundation and plinth including cost of all materials as required complete:- In cement mortar 1:4 ( 1 cement : 4 fine sand ). |
| 6 | Providing and laying in position cement concrete of specified grade excluding the cost of centring and shuttering --All work upto plinth level:1:2:4 ( 1 Cement: 2 fine sand : 4 graded stone aggregate 20 mm nominal size) |
| 7 | Providing and laying in position specified grade of reinforced cement concrete excluding the cost of centring, shuttering, finishing and reinforcement--All work upto plinth level:1:2:4 ( 1 Cement:2 fine sand : 4 graded stoneaggregate 20 mm nominal size) |
| 8 | Reinforced cement concrete work in beams, suspended floors, roofs having slope upto 15° landings, balconies, shelves, chajjas, lintels, bands, plain window sills, staircases and spiral stair cases upto floor five level excluding the cost of centring, shuttering, finishing and reinforcement-1:2:4 ( 1 Cement:2 fine sand : 4 graded stone aggregate 20 mm nominal size) |
| 9 | Reinforced cement concrete work in walls (any thickness), including attached pilasters, buttresses, plinth and skirting courses, fillets, columns, pillars,piers, abutments, posts and struts etc. upto floor five level excluding cost of centring, shuttering, finishing and reinforcement- 1:2:4 ( 1 Cement: 2 fine sand : 4 graded stone aggregate 20 mm nominal size) |
| 10 | Centering shuttering including struttings, propping etc. and removal of form work for:Foundations, footings, bases for columns etc. for massconcrete with timber plank |
| 11 | Centering shuttering including struttings, propping etc. and removal of form work for:Columns, Pillars, Piers, Abutments, Posts and Struts withwooden plank |
| 12 | Centering shuttering including struttings, propping etc. and removal of form work for:Lintels, beams, plinth beams, girders, bressumers andcantilevers with wooden plank |
| 13 | Reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding all complete upto plinth level. Thermo-Mechanically Treated bars of grade Fe-500D or more |
| 14 | 12 mm cement plaster of mix : In cement mortar 1 : 4 ( 1 cement : 4 fine sand ) |
| 15 | 12 mm cement plaster of mix : In cement mortar 1 : 4 ( 1 cement : 4 fine sand ) in/cl Neat cement punning |
| 16 | Providing and fixing chequered terrazo tiles 22 mm thick with graded marble chips of size upto 6 mm, laid on floors, footpath & courtyard on 20 mm thick bed of cement mortar 1 : 4 ( 1 cement : 4 fine sand ) jointed with neat cement slurry mixed with pigment to match the shade of tiles including rubbing and polishing etc. all complete as per direction of Engineer-in-charge. Dark shade pigment using ordinary cement |
| 17 | Providing, fabricating, transporting, assembling and erection in position of Steel members for steel colunms,built up beams using structural tubular sections (round,square or rectangular hollow tubes etc. confirming to IS 4923 / IS 1161, Yield strength 310 MPa as per latest IS Code) to the required profile & shape as called for as per the drawing & specifications and of approved makeincluding the shear connectors /studs and fusion weld to top of horizontal member. This item also includes prepration of shop drawings and their approval, necessary templates, adequate temporary supports, scaffolding & staging, all cutting, grinding, sliding & all labour tools,plants & equipments & operations etc. required to complete the job as per drawing & specification. Every precaution tobe taken to prevent rusting of sections. This item also includes all test on materials & welded fabricated parts as per specification and direction of Engineer- in- Charge.Temporary bolts & nuts ( grade EN 8 ) to be used duringassembling & shall be removed before site erection. All site erection bolts shall be HSFG type only. The item to include cost of sand blasting on materials, application of primer and epoxy paint in internal & external in fabrication shop &final painting on site including all touch up works after erection as per technical specification. |
| 18 | Providing and laying factory made kerb stoneProviding and laying at or near ground level factory made kerbstone of M-25 grade cement concrete inposition to the required line, level and curvature jointed with cement mortar 1:3 (1 cement : 3 sand), including making joints with or without grooves (thickness of joints except at sharp curve shall not tomore than 5 mm), including making drainage opening wherever required complete etc. as per direction of Engineer-in-Charge(length of finished kerb edging shall be measured for payment). (Precast c.c. kerb stone shall be approved by Engineer-inCharge). (Size D-450 x L-350 x B- 150 mm along both side of paver block) |
| 19 | Filling available excavated earth (excluding rock) in trenches, plinth, sides of foundations etc. in layers not exceeding 20cm in depth, consolidating each deposited layer by ramming and watering, lead up to 50 m and lift upto 1.5 m.-All kinds of soil |
| 20 | Half brick masonry work with first class bricks in foundation and plinth including cost of all materials as required complete:-In cement mortar 1:4 ( 1 cement : 4 fine sand ). |
| 21 | Finishing walls with acrylic smooth exterior paint of required shade of approved brand and manufacture [Payment shall be made after submission of TestCertificate issued by the Manufacturer] : New work ( two or more coats applied @ 1.67 litre/10 sqm over and including priming coat of exterior primer applied @ 2.20 kg/10 sqm) |
| 22 | Painting with synthetic enamel paint of approved brand and manufacture of required colour to give an even shade [Payment shall be made after submission of Test Certificate issued by the Manufacturer]: Two or more coats on new work over an under coat of suitable shade with ordinary paint (primer) of approved brand and manufacture |
| 23 | Designing, fabricating, testing, installing and fixing in position Curtain Wall with Aluminium Composite Panel Cladding, with open grooves for linear as well ascurvilinear portions of the building , for all heights and all levels etc. including: Aluminium Composite Panels of 4mm total thickness with Top coil– 0.50mm AA3003 / AA3105 / AA5005 Grade manufactured as per IS-737 1986, FR Grade Class B1 with 3mm Mineral Core with minimum 70-72% Inorganic content (Aluminium Hydroxide and Magnesium Hydroxide) 28-30% Organic content (LDPE) conforming to ASTM E-119-16,18 and EN 13501-1, class B1,and Bottomcoil– 0.50mm AA3003 / AA3105 / AA5005 Grade, manufactured as per IS-737 1986 with minimum 25 microns lead free PVDF Coating conforming toAAMA2605 on top coil and Service coating on Back Coil (4- 6 microns) having minimum panel weight of 7.5 Kg/m2 |
| 24 | Fabrication and supply of dustbins supported on to pole of 304 grade stainless steel. Made of 1.5 thick sheet and 50 dia circular pipes, having leaser cut perforation on vertical and bottom of dustbin, Capacity -45 letre (460x236x1225) |
| 25 | Fabrication and supply of Stainless steel 304 grade 4 seater without backrest bench with hair line finish, of length 1800 mm and width 676 mm and height 450 made with sheet metal, having laser cut perforation on seat, 2 leg made of 2mm thk SS Sheet fixed with the help of push fit component. (1700x450x450) |
| 26 | Supply , fabrication and Installation of Led Panels as per given Themes :Two profile combination 50 mm back profile,25 mm front open able profileBack sheet 1-1.5 mm thick Aluminium sheet End Caps : Plastic (Black & Grey)Length : 6ft and variableDisplay : Paper Print or 3M Vinyl Graphic insert covered with Transparent 5 mm thick clear Protection sheetInstallation : Hidden Screws, Double sided tape, Alu-Brackets and Suspension Clips with steel wires |
| 27 | Providing and fixing Transparent Acrylic Plexiglass 10 mm Sheet for DIY Projects (12 x 12 inches, Clear) used for rain guard material incerted in Aluminium Panel and fixed it to roof Steel beam, complete as per design and drawing.Sample should be approved by Landscape Architect before execution Please Enable Macros to View BoQ information |
