|
| 1 | CIVIL PORTION WORK: Earth work in excavation of foundation teachers/in all kinds of soil including moorum, stoney earth and earth mixed with boulder except sheet rocks and boulders requiring blasting including dressing and leveling the bed up to the required depth & depositing the excavated materials away from the work site with all leads & lefts top shorting & strutting if required etc. complete as directed by the Engineer-in-charge. |
| 2 | Supplying and filling in foundation and plinth with sand including watering, ramming cost, conveyance & taxes materials & cost of labour with T&P required for the works etc. complete. (measurement will be taken on finished completed section only) |
| 3 | Cement concrete (1:3:6) in foundation and floors using 4 cm. size black hard hand broken granite metals of approved quality and from approved quarry including lowering, laying concrete watering & curing etc. complete to required level including cost, conveyance royalties & taxes of all materials & cost of all labour with T&P required for work complete. |
| 4 | Cement concrete (1:4:8) in foundation and floors using 4 cm. size black hard hand broken granite metals of approved quality and from approved quarry including lowering, laying concrete watering & curing etc. complete to required level including cost, conveyance royalties & taxes of all materials & cost of all labour with T&P required for work complete. |
| 5 | RCC Work of M-20 grade with 20 mm and downgraded CBHG chips etc. including hoisting and laying etc. complete as direction of Engineer-In-Charge including centering, shuttering and dewatering if required. |
| 6 | Footing |
| 7 | Plinth Beam |
| 8 | Column |
| 9 | LINTEL |
| 10 | Wall beam |
| 11 | Roof slab |
| 12 | Chajja |
| 13 | Cutting straightening coiled or bent up MS Rods or Tor steel bending, binding welding and joining if necessary and tying the grills and placing in position as required for RCC work and of providing fan hook hoisting, lowering & laying including cost conveyance & taxes of MS Rod or Tor steel & binding wire of 18 to 20 guage required for the work for bending, binding & tying the grills (payment will be made on weight of MS Rods or Tor steel only & no separate payment will be made towards the weight of binding wires). |
| 14 | Fly ash Brickwork with in cement mortar (1:6) in Foundation and Plinth (23cm x 11cm x 8 cm) having minimum crushing strength not less than 75 kg.per.sq.cm. including splays cutting, circular moulding, chamfering, corbelling and similar such type of woks with all necessary projections. Watering and curing for 7 days and immersing the bricks in water for six hours before use etc. complete including cost and conveyance of all materials, labour with T&P required for the work with all taxes and royalties etc. complete in all respect as per direction of Engineer in charge. |
| 15 | Fly ash brick masonry in cement mortar (1:6) in superstructure using of (23cm x 11cm x 8 cm) size having minimum crushing strength not less than 75 kg.per.sq.cm. including splays cutting, circular moulding, chamfering, corbelling and similar such type of woks with all necessary projections. Watering and curing for 7 days and immersing the bricks in water for six hours before use etc. complete including cost and conveyance of all materials, labour with T&P required for the work with all taxes and royalties etc. complete in all respect as per direction of Engineer in charge.GROUND FLOOR |
| 16 | FIRST FLOOR |
| 17 | 16mm thick cement plaster (1:6) in all floors finished smooth to inside rough surface of 10 thick brick walls after rocking out the joints including watering and curing with cost conveyance, royalty and taxes of all materials and cost of all labour with T&P required for the work etc complete. |
| 18 | 12 mm(½”) thick cement plaster (1:6) finished smooth to out side smooth surface of brick wall after racking out the joints including watering wall curing, etc. complete with cost conveyance royalties & taxes of all materials and cost of all labour with T&P required for the work etc. complete. |
| 19 | Finishing wall surface of walls with Acrylic wall putty (cement based) of approved make and finished smooth andeven surface to received painting including cost of scaffording staging charges with cost of all materials. |
| 20 | Painting two coats with weather proof cement paint of approved shade by means of brush after cleaning the surface including watering and curing etc. complete using weather proof cement paint to be supplied by the contractor of his own cost, including cost of cement paint and all materials with all taxes, royalty, labour and T&P required for the work etc. complete. |
| 21 | Painting two coat with plastic emulstion paint of approved shade by means of brush after cleaning the surface including sand preparing etc. complete, to be supplied by the contractor of his own cost, including cost of cement paint and primer and all mater |
| 22 | Supplying fitting and fixing W.I. grills, Grills gates, M.S. gates as per approved drawing & designed including marking holes in brick & R.C.C. structures, wood work etc. and marking good to the damages to walls with cement concrete of prop 1:2:3 with black hard crusher broken granite stone chips of 12mm to 20mm size (20mm size not to exceed 25%) complete in all respects W.I. grills, gates M.S. gates screws & other required materials of approved quality will be supplied by the contractor at his own cost. |
| 23 | Supplying fitting fixing of UPVC door and window made up fenesta /NCL as shutter frame with rubber beading including lucking arrangement including all fitting including cost of materilas all taxes labour ,T&P complete as per direction of EIC.window |
| 24 | Supplying fitting fixing of 6mm glass including cost of all charges. |
| 25 | Supplying factory made single leaf rigid FRP sand witch composite door shutter of 32mm thick laminated with GRP skin etc complete with all fitting with cost of material. labour, T&P etc complete as per direction of E-I-C. |
| 26 | Painting three coats in all floors (two coats with paints of approved shade and base coat with primer) to new wood /iron work including sand papering, polishing the surface with cost conveyance cost of all materials and T&P required for the work but including cost of paints and primer complete, in all respect (paints and primer to be supplied by the contractor of his own cost.) |
| 27 | Providing fitting and fixing of false ceilling with Aluminium anodised T section no-3215 with 2'-0\\" center to center, L section no-1705 upto 15 micron on walls to be fixed by means of steel screw and P.V.C. plug and the Aluminium grid 2'-0\\" x 2'-0\\" suspended from ceiling etc complete. |
| 28 | Supplying, fitting, fixing up window ( sliding type ) made up aluminium section 9778 as window frasme section no.4095,4096 & 9777,3994 as shutter frame with 5mm thick black glass as pannel fitted with rubber beading including locking arrangement including all fitting including cost of materials all taxes labour T & P excluding cost of glass etc complete as per direction of E-I-C. |
| 29 | Supplying & Fixing vetrified tiles in floors, treads on steps and landing on 25mm thick bed of cement mortar 1:1 (1cement:1sand) joined with neat cement slurry mixed with pigment to match the shade of the tiles including rubbing and polishing complete including cost of pre-cast tile. |
| 30 | Supplying & fixing vetrified tiles in dado, skirting and risers of steps on 12mm thick cement plaster (1:3) joined with neat cement slurry mixed with pigments to match the shade of the tiles including rubbing and polishing compete including cost of pre-cast tiles. |
| 31 | 25mm thick grading concrete (1:2 :2) on roof slab using 6mm size hard broken granite chips of approved quality from approved quarry including lowering laying concrete watering & curing etc. complete to required level with laying & fixing of Hexogenal wire mash (25mm x 25mm x 11mm) as per direction of the E.I.C. including cost conveyance, royalty & taxes of all materials & cost of all labour with T&P required for the work etc. complete. |
| 32 | Supplying & fixing ceramic tiles in dado, skirting and risers of steps on 12mm thick cement plaster (1:3) joined with neat cement slurry mixed with pigments to match the shade of the tiles including rubbing and polishing compete including cost of pre-cast tiles. |
| 33 | EI PORTION WORK: Sub-Head I (modular Wiring Items).Recessed wirring to light point/ fan point/ exhaust fan point/ call bell point with 1.5 sq.mm FRLS PVC insulated copper conductor of ISI marked Make- Finolex/Anchor/Polycab/HAVELLS/RR KABLE/KEI/Gloster with 20 mm dia HMS FRLS PVC conduit ISI marked Make-AKG/BEC/Precision/Norpak/Anchor/Kinjal 6A modular type ( flame retradant type) switch ISI marked Make-Schneider(Zencelo)/legrand( Myrius) /Panasonic (vision) and ceiling rose ISI marked of modular type G.I box with metallic cover plate (both side) ( flame retradant type) Make-Schneider(Zencelo)/legrand( Myrius) /Panasonic (vision) of suitable size, modular box with 1.5 sq. Mm FRLS PVC insulated single core multistandard copper conductor as earth wire including all accessories and connection as per direction of Engineer -in -Charge. |
| 34 | GROUP-A |
| 35 | GROUP-B |
| 36 | GROUP-C |
| 37 | Supplying ,fixing of 6A Plug on the same board in existing switch board with complete fitting by 01 no of 6A switch & socket (modular type)( flame retradant type)) & other required accessories of ISI marked as approved as per direction of Engg. -in -Charge. Make-Schneider(Zencelo)/legrand( Myrius) /Panasonic (vision). |
| 38 | Supplying,fixing of 2 x 6A Plug on the separate board with complete fitting by 02 no of 6A switch & socket(modular type) ( (flame retradant type) with suitable size modular box & metallic cover plate (both side)( flame retradant type)including supplying of all required accessories of ISI marked as approved as per direction of engg-in-charge..Make-Schneider(Zencelo)/legrand( Myrius )/Panasonic (vision) (For equipement power)(Maximum 02 nos point in one circuit). |
| 39 | Supplying,fixing of 1x16A Plug on the separate board with complete fitting by 01 no of 16A switch & socket(modular type)( flame retradant type) with suitable size modular box & cover( flame retradant type) including supplying of all required accessories of ISI marked as approved as per direction of engg-in-charge.. Make-Schneider(Zencelo)/legrand( Myrius)/Panasonic (vision) |
| 40 | Recessed wiring for circuit/submain wiring with the following mentioned size PVC FRLS insulated, copper conductor, single core cable Make- Finolex/Anchor/Polycab/HAVELLS/RR KABLE/KEI/Gloster in recessed HMS FRLS PVC conduit of mentioned size Make-AKG/BEC/Precision/Norpak/Anchor/Kinjal as required as per direction of Engg.-in-Charge. 2 nos single core 1.5 sq. mm copper wire for phase and neutral and 01 no of single core 1.5 sq. mm copper wire for earth continuty conductor. In 20 mm dia non metallic heavy duty conduit (LDB to LSB/LIGHT CKT)(2X1.5+1X1.5) |
| 41 | Recessed wiring for circuit/submain wiring with the following mentioned size PVC FRLS insulated, copper conductor, single core cable Make- Finolex/Anchor/Polycab/HAVELLS/RR KABLE/KEI/Gloster in recessed HMS FRLS PVC conduit of mentioned size Make-AKG/BEC/Precision/Norpak/Anchor/Kinjal as required as per direction of Engg.-in-Charge.2 nos single core 2.5 sq. mm copper wire for phase and neutral and 01 no of single core 1.5 sq. mm copper wire for earth continuty conductor in 20 mm dia non metallic heavy duty conduit.(BDB to LSB/LIGHT CKT/5A PLUG/UPS POINT ) (2X2.5+1X1.5) |
| 42 | Recessed wiring for circuit/submain wiring with the following mentioned size PVC FRLS insulated, copper conductor, single core cable Make- Finolex/Anchor/Polycab/HAVELLS/RR KABLE/KEI/Gloster in recessed HMS FRLS PVC conduit of mentioned size Make-AKG/BEC/Precision/Norpak/Anchor/Kinjal as required as per direction of Engg.-in-Charge.2 nos single core 4 sq. mm copper wire for phase and neutral and 01 no of single core 1.5 sq. mm copper wire for earth continuty conductor in 20 mm dia non metallic heavy duty conduit .(PDB to PSB/ POWER POINT/AC POINT) (2X4+1X1.5) |
| 43 | Recessed wiring for circuit/submain wiring with the following mentioned size PVC FRLS insulated, copper conductor, single core cable Make- Finolex/Anchor/Polycab/HAVELLS/RR KABLE/KEI in recessed HMS FRLS PVC conduit of mentioned size Make-AKG/BEC/Precision/Norpak/Anchor/Kinjal as required as per direction of Engg.-in-Charge.4 nos single core 10 sq. mm copper wire for phase and neutral and 02 no of single core 4 sq. mm copper wire for earth continuty conductor in 25 mm dia non metallic heavy duty conduit .(LFDB TO LBDB/UBDB) (4X6+2X2.5) |
| 44 | S/F of Bakelite angle holder/batten holder (make-Anchor/Havells or equievalant reputed make A catagory ISI marked as approved )of ISI marked conforming to IS-1258/1987 in place of ceiling rose as per direction of Engg.-in-Charge .All the Components should be warrantied for a replacement period of 2 years against defects with ncessary test report & Warrnaty certificate to be submitted to the department for genuinity of product & to avail free aftersales service within warranty period for acceptance of materials. |
| 45 | S/F of 9 watt LED Bulb of approved ISI Make (Crompton/Bajaj/Havells) |
| 46 | S/F of 5 step type Modular electronic Fan Regulator ISI Marked with all connection complete in all respect as per direction of Engineer in charge (Make: legrand Myrius /Schneider(Zencelo)/Panasonic(Vision) |
| 47 | S/F of AC ceiling fan 48'' (Havells/Bajaj/CG/USHA) |
| 48 | SITC of energy efficient LED tube light fittings with decorative alluminium batten and LED tube light having power rating not more than 20 watt and lumen output not less than 2200 lumen complete with electronic driver and all other accessories with diffuser having 2 years warranty i/c connection etc as required as per direction of Engg.-in-Charge. (Make: Panasonic/LT/Havells /Philips/Wipro /Crompton/Bajaj). |
| 49 | S/F of Exhaust fan 12''Turbo HD 900rpm (Usha/Havells/CG) |
| 50 | Supplying and fixing of Energy efficient surface /recess mounted square /round shape 15 W LED luminaire of dimension of consists of white powder coated , die-cast Alluminium housing with high quality frosted diffuser for glare-free uniform lighting distribution with wattage not more than 15 watt and lumen output of 1500 lumens, , CRI not less than 80,CCT of 6000 degree K,THD less than 10%, with electronic driver, internal surge protection of 3 KV , L70 B50: 50000 hrs and all other accessories suitable for operation on 220 V to 240 V supply as required as per direction of Engg.-in-Charge. (Make: Panasonic/LT/Havells /Philips/Wipro /Crompton/Bajaj).The luminaire should be Replacement Warranty will be 2 years |
| 51 | S/F of 63 Amp 4 pole MCCB, 36 KA in sheet steel enclosure(L&T/Havells) |
| 52 | Supplying and fixing of following mentioned way, three pole/single pole and neutral, sheet steel,double door MCB distribution board, 415 volts/240 volts shall be as per IEC 61439-3,integrated door earthing system offering additional safety to the user,High quality polyurethane Gasket,the box and cover shall be fabricated to withstand IK09,the DB should be properly pre-treated with 7 tank process and duly powder coated, phosphatized with powder coated finish, on surface/recess, complete with terminal blocks,with suitable size FR PVC insulated copper conducter up to terminal blocks, tinned copper busbar, neutral busbar, earth bar, din bar. Make-LEGRAND-Ekinox3 DB/ Siemens-Betaguard/ Schneider- Acti 9 as per direction of Engg.-in-Charge. The Distribution boards should be Replacement Warranty will be 3 years. |
| 53 | 4 Way(8+12) Way TPN MCB DD DB Horizontal Type as per IEC 61439-3 suitable for Flush mounting and Surface mounting with 100A Copper Bus Bar for each phase, with neutral Bus bar, Earth Bar & Cable ties for cable management, prefitted masking sheet, IP43-IK09 with metal door(POWER INDOOR,3-PH,POWER LOAD) Warranty on DB is 3 years. |
| 54 | Supplying and fixing 63Amps 4P 415 volts MCB Make-LEGRAND-DX3/ Siemens-Betaguard/ Schneider- Acti 9/L&T in the existing MCB DB in the existing MCB DB complete with connections as per direction of Engg.-in-Charge.(for power BDB , 4 way TPN BDB IC).The MCB should be Replacement Warranty will be 3 years |
| 55 | Supplying and fixing 6 amps to 32 amps rating, 240 volts, C series,10KA breaking capacity, single poles MCB of Make-LEGRAND-DX3/ Siemens-Betaguard/ Schneider- Acti 9the existing MCB DB complete with connections as per direction of Engg.-in-Charge. .Warranty on MCB is 3 years. |
| 56 | S/F of 10Ltr. Storage Water Heater Sprinhot Plus series with ABS outer body and Stainless steel inner tank Capacity Gyser Machine (Make-V-guard/Bajaj/Havells) |
| 57 | Earthing with G.I earth pipe 3 meter long 40 mm dia ISI marked including accessories and providing and providing masonary with cover plate having loccking arrangement and watering pipe etc wih charcoal and salt) as required. |
| 58 | Providing and fixing 6SWG G.I. wire on surface or in recess for loop earthing as required.as per direction of Engg.-in-Charge. |
| 59 | S/F of Street light- 30W,120 lm/w efficiancy ,IP PC Lens new generation energy saving & environmental friendly long life versatile pressure die-cast alluminium IP66 roadway luminaire with high power LED as light source with acrylic cover(Make: Bajaj/polycab/crompton/Eq.) |
| 60 | S/F of G.I Bend pipe,jamlock nut&bolt & clamping accessoriess |
| 61 | Supply & laying of 1x 2.5 mm2 sub main for Inverter wiring |
| 62 | S/F of 25sq.mm 4 core Aluminium Armoured cable(Havells/Polycab/KEI) |
| 63 | PH PORTION WORK: Supplying all materials, labour, T&P and providing and fixing to wall or ceiling and floor GI/PVC pipes, class-IV (10 k.g. F/cm) on firming I.S.4985 of the following nominal bore, tube fittings and clamps including making good the wall, ceiling and floor, testing all complete as per specification and direction of the Engineer in charge. 25mm dia PVC ASTM pipe (sch-80) |
| 64 | 32mm dia PVC ASTM pipe (sch-80) |
| 65 | Supplying all materials, labour T&P and fitting and fixing brass/CP fittings of the following nominal bore with supply of all joiniting materials including cost & conveyance of all materials to worksite, payment of taxes etc. all complete as per P.H specification and direction of the Engineer-in-charge.15mm dia CP angle stop cock (Jaquar Make) |
| 66 | 15mm dia CP Long Body Bib cock (Jaquar Make) |
| 67 | 25mm dia brass full way valve (Shakti make) |
| 68 | 15mm CP Extension piece |
| 69 | 125mm CP grating |
| 70 | 15mm size C.P. flange |
| 71 | supplying all materials, labour, T&P and cutting holes through existing brick work including making good the damages in cement mortar (1:4) for taking G.I. Pipes and fittings/ P.V.C. pipes and fittings including watering, curing, cost & conveyance of all materials to worksite, payment of royality, taxes etc. all complete as per direction of Engineer-in-charge. |
| 72 | Supplying all materials , labour, T&P and cutting holes in RCC floors and roofs upto 19cm thick for passing P.V.C pipes and G.I fittings etc. , and repairing the holes after insertion of pipe etc. with cement concrete (1:2:4) including finishing complete so as to make it leak-proof as per P.H. specification and direction of Engineer-in-charge |
| 73 | Supplying all materials, labour, T&P and cutting grooves in pucca floors and walls for taking G.I./P.V.C. pipes and making good the damages including watering , curing , cost & conveyance of all materials to worksite, payment of royality, taxes etc all complete as per direction of the Engineer-in-charge. |
| 74 | Supplying all materials, labour, T&P and fitting and fixing U-PVC SWR soil waste ventilating pipes and fittings of the following outside diameter conforming to ISI No 13592/1992 to walls with nails, bobbins and wooden plugs or laying in trenches including jointing with supply of approved rubber lubricant by non-heat application method/as per manufacturer's specification, testing, earthwork in excavation in all kinds of soil and refilling of trenches , cost & conveyance of all materials to worksite, payment of taxes etc. all complete as per P.H specification and direction of the Engineer-in-charge. 110mm U-PVC SWR Pipe (Ori Plast/Finolex/Supreme Make Type-B) |
| 75 | 110mm U-PVC ‘P’ Trap(Ori Plast/Finolex/Supreme Make) |
| 76 | 110mm U-PVC door bend(Ori Plast/Finolex/Supreme Make) |
| 77 | 110mm U-PVC Plain tee(Ori Plast/Finolex/Supreme Make) |
| 78 | 110mm U-PVC offset without ear(Ori Plast/Finolex/Supreme Make) |
| 79 | 110mm U-PVC Cowl(Ori Plast/Finolex/Supreme Make) |
| 80 | 110mm U-PVC S/Jn door(Ori Plast/Finolex/Supreme Make) |
| 81 | 110mm U-PVC D/Jn door(Ori Plast/Finolex/Supreme Make) |
| 82 | 110mm U-PVC Socket(Ori Plast/Finolex/Supreme Make) |
| 83 | Supplying all materials, labour, T&P and fixing vitreous china water closet, squatting pan (Indian type W.C pan/Orissa pattern squatting pan) duly embedded in cement concrete (1:5:10) using 4cm size hard granite metal including fixing a pair of vitreous china 250mm x 130mm x30mm footrest, fixing 100mm dia HCI 'p' or 's' trap (with/without 50mm dia horn) for water colset squatting pan including jointing the trap with pan in cement mortar (1:1) cutting the floor and mending good the damages , cost & conveyance of all materials to worksite, payment of royality , taxes etc. all complete as per P.H specification and direction of the Engineer-in-charge. 580mm size Orissa pan (Hindware/Parryware/Neycer make) |
| 84 | Supplying all materials, labour T&P and and fixing 12.50 liters/10 liters capacity low level flushing cistern with a pair of cast iron or M.S. brackets complete with fittings such as siphonic arrangements 15mm nominal size brass/pvc ball valve with polythene float CP brass handle,unions and couplings for connection with inlet, outlet and overflow pipes, 32mm dia CP long flush bend, 15mm dia pvc inlet connection pipe including cutting holes and making good the same and connecting the flush bend with cistern and closet and connceting the inlet pipe with suupply main , cost & conveyance of all materials to worksite, payment of taxes etc. all complete as per P.H specification and direction of the Engineer-in-charge.10 ltr. Capacity pvc L.L. cistern with 32mm. Dia CP long flush bend ( Slimline-white-Parryware make ) |
| 85 | Supplying all materials, labour T&P and fixing wash basins with hole for pillar taps with cast iron or M.S.brackets painted white including cutting holes in walls and making good the damages with supply of wooden plugs, screws and cement etc, fixing pedestal for wash basin recessed at the back for the reception of pipes and fittings, fixing PVC waste pipe of 32mm nominal diameter for wash basin including brass check nut complete, fixing pillar taps capstan head screw down high pressure lettered 'Hot' and 'Cold' with long screws, shanks and back nuts of 15mm dia nominal bore, fixing 15mm dia PVC inlet connection pipe and making connection with pillar cocks and supply mains for wash basin, fixing 32mm dia CP brass waste, cost & conveyance of all materials to worksite, payment of taxes etc. all complete as perP.H specification and direction of the Engineer-in-charge.550mmx400mm W.H.basin (Hindware/Parryware/Neycer make)with 15mm dia C.P.pillar cock (Plaza make) with pedestal |
| 86 | Supplying all materials, labour, T&P and fixing standard sized CP towel rail complete with CP brass brackets fixed to wooden plugs with CP screws as per specification and direction of the Engineer in charge.25mm x 600mm long CP towel rail |
| 87 | Supplying all materials, labour, T&P and fixing mirror of superior glass mounted on 6mm.thick A.C. sheet or ply wood sheet and fixed to wooden plugs with CP screws and washers complete as per specification and direction of Engineer in charge.600mmx450mm size B.E mirror (swivelled type) |
| 88 | Supplying all materials, labour, T&P and fixing CP soap holder complete with CP brass brackets fixed to wooden plugs with CP screws as per specification and direction of the Engineer in charge.CP soap holder |
| 89 | Supplying all materials labor T&P & Fitting & fixing CP shower with rim with supply of red lead and yarn nail complete as per direction of Engineer in charge.15mm CP revolving shower Please Enable Macros to View BoQ information |
