|
| 1 | Excavation in foundation and trenches in earth work in all heights and depths in all kinds of soils, including saturated soils comprising of pick work, jumper work and blasting work both in soft and hard rock with chiseling and wedging out of rock (where blasting is prohibited) and their intermediate classification of soils including, dewatering wherever required, setting out to required lines, levels as shown on the drawing and directed by the engineer-in-charge at site., according to the HP.PWD. specification of 1990 (one thousand nine hundred ninety) volume-I (one) and sorting out useful and unuseful material and transportation of the unuseful material for disposing at dumping site (To be arranged by the contractor) including payment of MC/ local body dumping charges it lived any as per satisfaction of Engineer-in-charge through all modes of transportation including head load, animal load or mechanical means along with its leveling fine dressing and with all kinds of labour, machineries, tools equipments and safety measures and incidentals necessary to complete the work by mechanical means and labour (if required). All useful material such as stones, shingles aggregate and slates shall be properly stacked at site to the maximum possible extent in all leads and lifts through all modes of transportation and used/ removed as per the direction of Engineer-in-charge. Any loss to the public and private propriety during the course of execution and disposal of serviceable and unserviceable materials shall be absolute responsibility of the contractor and shall have to be duly compensated by him in all respects including all incidental charges. |
| 2 | Providing and laying cement concrete 1:6:12 (One cement : six sand : twelve graded/crushed stone aggregate 40 mm (Forty millimeter) nominal size) mechanically mix by concrete mixer including curing complete excluding cost of centering and shuttering in: Foundation and plinth, including carriage of materials through all modes of transportation with in all leads and lifts, as per PWD specifications and as per direction of the Engineer-in-charge. |
| 3 | Form work:-Providing form work with steel plates 3.15mm. (Three point fifteen milimetre) thick welded with angle iron in frame 30X30mmx5mm.(Thirty into thirty into five millimeter) so as to give a fair finish including centring, shuttering, strutting and propping etc. with wooden/ steel battens and ballies, height of propping and centring below supporting floor to ceiling upto any height and removal of the same for in situ-reinforced concrete and plain concrete work, including carriage of materials through all modes of transportation with in all leads and lifts, as per PWD specifications and as per direction of the Engineer-in-charge. (a) Foundation, footing bases of colums etc. and mass concrete. |
| 4 | b) Columns, pillars, posts and struts. Square, rectangular or polygonal in plan, in Super-structure for all floor level in all heights |
| 5 | c) Flat surfaces such as soffits of suspended floors, roofs, landings and the like. Floors etc.upto any thickness in Super-structure for all floor level in all heights. |
| 6 | d) Beams, cantilevers, girders and lintels sides and soffits of beams, beam hunchings, cantilevers, bressumers and lintels up to any depth in Super-structure for all floor level in all heights. |
| 7 | Providing and laying reinforced cement concrete 1:1.5:3 (One cement : one point five sand : three crushed stone aggregate 20mm. (Twenty millimeter) nominal size) mechanically mix by concrete mixer and compacting the concrete with vibrator and curing complete excluding cost of form work and reinforcement for R.C.C. work, including curing and carriage of materials through all modes of transportation with in all leads and lifts, as per PWD specifications and as per direction of the Engineer-in-charge. (a) Foundation footing bases of columns etc. and mass concrete. |
| 8 | b) Column, pillars, posts and struts in Super-structure for all floors in all heights |
| 9 | c) Suspended floors roofs, landings and shelves and their supports, balconies, beams, girders, bressumers and cantilevers in Super-structure for all floors in all heights. |
| 10 | Providing Tor steel reinforcement including cost of binding wire for R.C.C. work including cutting, bending, binding and placing in position including cost of binding wire complete in Super-structure for all floor level in all heights, including carriage of materials through all modes of transportation with in all leads and lifts, as per PWD specifications and as per direction of the Engineer-in-charge. |
| 11 | Stone filling / Soling under floor dry hand packed with hard stone of approved quality consolidated properly with hand or mechanical rammer to required level as per HPPWD specification 1990 (One thousand Nine hundred Ninety) volume-I including carriage of materials ,labour ,tool and plants through all modes of transportation with in all leads and lifts, and as per direction of the Engineer-in-charge. |
| 12 | Providing and laying cement concrete 1:3:6 (One cement : three sand : six graded/crushed stone aggregate 40 mm (Forty millimeter) nominal size) mechanically mix by concrete mixer including curing complete excluding cost of centering and shuttering in: Foundation and plinth, including carriage of materials through all modes of transportation with in all leads and lifts, as per PWD specifications and as per direction of the Engineer-in-charge. |
| 13 | Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level 1:4:8 (1 Cement : 4 coarse sand): 8 graded stone aggregate 40 mm nominal size) including carriage of materials ,labour ,tool and plants through all modes of transportation with in all leads and lifts, and as per direction of the Engineer-in-charge. |
| 14 | Providing woodwork in frames of doors, windows, clerestory, windows and other frames wrought, framed and fixed in position with 1st class Sal wood in all floors level, including carriage of materials through all modes of transportation with in all leads and lifts, as per PWD specifications and as per direction of the Engineer-in-charge. |
| 15 | Providing 40 x 3 mm(forty into three millimetre) flat iron hold fast 40 cm(forty cetimetre) long including fixing to frame with 10 mm (Ten millimetre) dia bolts, nuts and wooden plugs and embeding in cement concrete block 30 x 10 x15 cm (Thirty into ten into fifteen) centimetre) in 1:3:6 (one cement :three sand :six graded stone aggregate 20 mm(Twenty millimetre) nominal size ). including carriage of all labour equipment & materials to various location through all leads & lifts complete as per entire satisfaction of the Engineer-in-Charge. |
| 16 | Brick work using common burnt clay building bricks in super structure for all floors in all heights using second class bricks in cement mortar 1:6 (One cement isto six sand) and curing complete including carriage of material through all modes of transporation within all leads and lifts and as per PWD specification and entire satisfaction and direction of Engineer-in-charge |
| 17 | Providing and laying 40mm (Forty millimeter) cement concrete flooring 1:2:4 (One cement: two sand: four graded stone aggregate 20mm (Twenty milimetre) nominal size) laid in one layer finished with a floating coat of neat cement as per HP. PWD. specifications of 1990 volume-I including carriage of materials, labour, tool and plant through all modes of transportion within all leads and lifts and as per direction of Engineer-in- Charge. |
| 18 | 6mm (Six millimeter) Cement Plaster to ceiling. In cement mortar 1:3 (One cement : three sand) including carriage of materials ,labour ,tool and plants through all modes of transportation with in all leads and lifts, and as per direction of the Engineer-in-charge. |
| 19 | 15 mm cement plaster in single coat on the rough side of brick/concrete walls for internal plastering upto all floor level including arrises,internal rounded angles,chamfers and/or rounded angles not exceeding 80 mm in girth and finished even and smooth. Cement mortar 1:6 (1 cement : 6 sand) including carriage of materials ,labour ,tool and plants through all modes of transportation with in all leads and lifts, and as per direction of the Engineer-in-charge. |
| 20 | 15 mm (Fifteen millimeter) cement plaster in single coat on fair side of brick/concrete walls for internal plastering upto all floor level including arrises,internal rounded angles,chamfers and/or rounded angles not exceeding 80 mm (Eighty millimeter) in girth and finished even and smooth. Cement mortar 1:6 (One cement : six sand) including carriage of materials ,labour ,tool and plants through all modes of transportation with in all leads and lifts, and as per direction of the Engineer-in-charge. |
| 21 | Providing and laying Non slipary anti skid ceramic tiles 5.5 mm (five point five millimeter) thick of in flooring (300x300xmillimeter size), tread of steps, flooring laid on a bed of 12 mm thick cement mortar 1:3 (1 sand: 3 sand) finished with flush pointing in white cement complete as per HP. PWD. specifications of 1990 volume-I including carriage of materials, labour, tool and plant through all modes of transportion within all leads and lifts and as per direction of Engineer-in- Charge. |
| 22 | Providing and fixing white/coloured glazed tiles 6 mm ( six millimetre) thick in skirting risers of steps and dado of approved make and size 30x45 cm (size thirty centimetre into forty five centimeter) over base of 12mm thick cement mortar 1:3 (one cement : three sand) and jointing with neat cement slurry complete as per HP. PWD. specifications of 1990 volume-I including carriage of materials, labour, tool and plant through all modes of transportion within all leads and lifts and as per direction of Engineer-in- Charge. |
| 23 | P/F 10mm thick anti skid water proof stain & impact resistant heavy duty vetrified tiles 600 x600 x10 mm manufactured of approved shade & colour in flooring, treads of steps & landings laid over 12mm thick cement mortar 1:3 (1cement : 3sand) jointed with cement slurry mixed with pigment to match the shade of tiles as required complete as per HP. PWD. specifications of 1990 volume-I including carriage of materials, labour, tool and plant through all modes of transportion within all leads and lifts and as per direction of Engineer-in- Charge. |
| 24 | Providing and fixing M.S. grills of required patterns in woodan frames of windows etc. With M.S. flats, square or round bars with round headed bolts and nuts or by screws. Plain grill including carriage of materials, labour, tool and plant through all modes of transportion within all leads and lifts and as per direction of Engineer-in- Charge. |
| 25 | Providing and fixing pannelled glazed and pannelled and glazed door shutter( in Second class Deodar wood) and panel 12 mm (Twelve ) thick Phenol bonded (both side) prelaminated partical board in matt finish ISI marked IS.No. 12823 as per approved shade 5 mm (Five millimeter) thick glass i/c black enammelled iron butt hinges with necessary screws etc comp. 35 mm (Thirty Five millimetre) thick as per Arch. drg. including carriage of all labour equipment & materials to various location through all leads & lifts complete as per entire satisfaction of the Engineer-in-Charge. |
| 26 | Applying priming coat over new wood and wood based surfaces after and including preparing the surface by thoroughly cleaning oil, grease, dirt and other foreign matter sand paper and knotting complete as per HP. PWD. Specifications of 1990 Volume-I including carriage of materials, labour, tool and plant through all modes of transportion within all leads and lifts and as per direction of Engineer-in- Charge. |
| 27 | Painting two coats (excluding priming coat) on new wood and wood based surfaces,with ready mixed paint to give an even shade including cleaning the surface of dirt, dust and other foreign matter sand papering and stopping as per HP. PWD. Specifications of 1990 Volume-I including carriage of materials, labour, tool and plant through all modes of transportion within all leads and lifts and as per direction of Engineer-in- Charge. |
| 28 | Applying priming coat over new steel and other matel surfaces after and including prepairing the surface by thoroughly cleaning oil grease, dirt and other foreign matters sand papered knotting Ready mixed pain brushing red oxide/zink oxide chrome as per HP. PWD. Specifications of 1990 Volume-I including carriage of materials, labour, tool and plant through all modes of transportion within all leads and lifts and as per direction of Engineer-in- Charge. |
| 29 | Painting two costs (excluding priming cost on new steel and other metal surfaces, under coat with eith enamel paint brushing to give an even shade including cleaning the surface of all dirt, dust and other foregin matters. Ready mixed paint white/ other than white, including carriage of materials, labour, tool and plants through all modes of transportation with in all leads and lifts, and as per direction of the Engineer-in-charge. |
| 30 | Applying Birla white wall care putty over plaster surface after thoroughly brushing the surface free from mortar drops, dust, loose materials and other foreign matters sand pepered smooth to give final matter finish to the surface complete, including carriage of materials ,labour ,tool and plants through all modes of transportation with in all leads and lifts, and as per direction of the Engineer-in-charge. |
| 31 | Wall painting two coats with acrylic emulsion paint of approved brand and manufacture for interior grade on undecorated concrete/stone/plaster wall surfaces to give an even shade incluiding thoroughly brushing the surface free from mortar dropping and other foriegn matter and sand papered smooth incluiding applying of putty a required for metling the surface, including carriage of materials ,labour ,tool and plants through all modes of transportation with in all leads and lifts, and as per direction of the Engineer-in-charge. |
| 32 | Finishing wall with weather proof exterior grade emulsion of approved design (Apexultima) or its equaeliet on under corted wall surfaces (two coats) to give an even shade and final finish after thoroughly cleaning the surface to remove all dirt, dust and other foreign matter etc. including sand paper smooth complete. |
| 33 | Providing and fixing, Aluminium powder coated sliding door bolt with bolts and nuts screws etc. complete, including carriage of materials ,labour ,tool and plants through all modes of transportation with in all leads and lifts, and as per direction of the Engineer-in-charge.250 x 16 mm (Two hundred fifty into sixteen millimeter) |
| 34 | Providing and fixing, Aluminium powder coated tower bolts (barrel type) anodized transparent or dyed to required shade and colour with screws etc. complete, including carriage of materials ,labour ,tool and plants through all modes of transportation with in all leads and lifts, and as per direction of the Engineer-in-charge. (a)150x10mm. |
| 35 | b)100x10mm. |
| 36 | Providing and fixing, Aluminium powder coated handles with necessary screws etc., including carriage of materials ,labour ,tool and plants through all modes of transportation with in all leads and lifts, and as per direction of the Engineer-in-charge. (a)100 mm (One hundred millimeter). |
| 37 | Providing and fixing powder coated aluminium hooks and eyes 150mm (One hundred fifty millimeter) including carriage of materials, labour, tool and plant through all modes of transportion within all leads and lifts and as per direction of Engineer-in- Charge. |
| 38 | Providing plinth protection 50 mm (Fifty millimetre) thick in cement concrete 1:3:6 (One cement isto three sand isto six graded crushed stone aggregate 20mm (Twenty millimetre) nominal size including finishing the top surfaces of concrete smooth as per HP. PWD. Specifications of 1990 Volume-I and providing under layer for plinth protection of 75 mm (Seventy five millimeter) thick (unconsolidated) bed dry brick/stone aggregated 40 mm (Forty millimeter) nominal sizeincluding carriage of materials ,labour ,tool and plants through all modes of transportation with in all leads and lifts, and as per direction of the Engineer-in-charge. |
| 39 | Supplying and fixing glass panes with putty and nails/or wooden beading including carriage of materials ,labour ,tool and plants through all modes of transportation with in all leads and lifts, and as per direction of the Engineer-in-charge. Plain glass 4mm ( four millimeter) thick. |
| 40 | Providing and laying heavy duty precast cement concrete interlocking pavor block vibro compacted up to m 35 (Thirty Five) grade including border or curve block gray or coloured over sub base of concrete with 25mm (Twenty five millimeter) thick average thickness of cement mortar 1:4 (One cement : four sand) laid over and jointed with neat cement slurry mixed with pigment to match the shade of block incluiding curing rubbing and polishing complete. 60mm thick (Eighty millimeter) thick.interlocking blocks, including carriage of materials ,labour ,tool and plants through all modes of transportation with in all leads and lifts, and as per direction of the Engineer-in-charge. |
| 41 | Providing and fixing to wall ceiling and floor galvanized mild steel tubes (Medium grade) tube fitting and clamps including making good the wall, ceiling and floor, including carriage of materials through all modes of transportation with in all leads and lifts, as per PWD specifications and as per direction of the Engineer-in-charge. |
| 42 | Providing and fixing PTMT Cloured/ white high density polyethylene / poly propylene 10 litres capacity ( full flush) European standard control low level flushing cistern with fittings with a pair of brackets with fittings such as lead valve, syphon, 15mm nominal size PVC ball valve with polythene float, with push button, couplings for connections with inlet, outlet and over flow pipe, 40mm dia C.P. flush bend including cutting holes in walls and making good the same and connecting the flush bend with cistern and closet.. |
| 43 | Providing and fixing PVC floor trap ISI marked of self cleaning design including fixing with approved adhesive, cost of cutting and making good the wall and floors etc. complete, including carriage of materials ,labour ,tool and plants through all modes of transportation with in all leads and lifts, and as per direction of the Engineer-in-charge. 110 mm x 90 mm (One hundred ten millimeter into ninety millimeter) |
| 44 | Providing and fixing 100mm (One hundred millimeter) diameter C.P. grating for floor or nahani/ gully/ floor trap, including carriage of materials ,labour ,tool and plants through all modes of transportation with in all leads and lifts, and as per direction of the Engineer-in-charge. |
| 45 | Providing and fixing C.P. Brass bib tap (heavy duty ISI marked IS:8931 & 8934) with capastan head. 15 mm dia (Fifteen millimeter diameter) including carriage of materials ,labour ,tool and plants through all modes of transportation with in all leads and lifts, and as per direction of the Engineer-in-charge. |
| 46 | Providing & fixing CP brass stop cocks 15 mm dia (Fifteen millimeter diameter) including carriage of materials ,labour ,tool and plants through all modes of transportation with in all leads and lifts, and as per direction of the Engineer-in-charge. |
| 47 | Providing and fixing vitreous china wash basin No. 10001 with single hole for pillar tap with C.I. or M.S. brackets painted white including cutting holes and making good the same but excluding fittings:- Flat back 550mm x 400 mm (Five hundred fifty millimeter into four hundred millimeter) including carriage of materials ,labour ,tool and plants through all modes of transportation with in all leads and lifts, and as per direction of the Engineer-in-charge. |
| 48 | Providing and fixing C.P. Brass waste for wash basin or sink 32 mm dia (Thirty two millimeter diameter) including carriage of materials ,labour ,tool and plants through all modes of transportation with in all leads and lifts, and as per direction of the Engineer-in-charge. |
| 49 | Providing & fiixng PTMT waste coupling for wash basin or sink 32mm dia of approved colour including carriage of materials, labour ,tool and plants through all modes of transportation with in all leads and lifts, and as per direction of the Engineer-in-charge.. |
| 50 | Providing and fixing 600 mm x 450 mm (Six hundred millimeter into four hundred fifty millimeter) bevelled edge mirror of superior glass mounted on 6 mm (Six millimeter) thick A.C. Sheet or plywood sheet and fixed to wooden plugs with C.P. Brass screws and washers, including carriage of materials ,labour ,tool and plants through all modes of transportation with in all leads and lifts, and as per direction of the Engineer-in-charge. |
| 51 | Providing and fixing P.V.C. connection with brass unions:- 300/450 mm (Three hundred/four hundred fifty millimeter) length (heavy duty ISI marked IS:8931 & 8934) 15 mm (Fifteen millimeter) nominal bore, including carriage of materials ,labour ,tool and plants through all modes of transportation with in all leads and lifts, and as per direction of the Engineer-in-charge. |
| 52 | Providing and fixing C.P. Brass pillar tap with Capstan head (heavy duty ISI marked IS:8931 & 8934) 15 mm dia (Fifteen millimeter diameter) including carriage of materials ,labour ,tool and plants through all modes of transportation with in all leads and lifts, and as per direction of the Engineer-in-charge. |
| 53 | Providing and fixig brass full way valve with wheel, including carriage of materials, labour ,tool and plants through all modes of transportation with in all leads and lifts, and as per direction of the Engineer-in-charge. |
| 54 | Providing and fixing C.P. Brass Towel rail complete with C.P. Brass brackets fixed to wooden plugs with C.P. Brass screws and washers. 600 mm x 20 mm (Six hundred millimeter into twenty millimeter) including carriage of materials ,labour ,tool and plants through all modes of transportation with in all leads and lifts, and as per direction of the Engineer-in-charge. |
| 55 | Providing and fixing chromium plated brass soap dish with C.P. Brass brackets fixed to wooden cleats with C.P. Brass screws, including carriage of materials ,labour ,tool and plants through all modes of transportation with in all leads and lifts, and as per direction of the Engineer-in-charge. |
| 56 | Providing and fixing vitreous China wash down,water closet (European type. W.C. pan) with integral 'P' or 'S' trap including jointing the trap with soil pipe in cement mortar 1:1(One cement : one sand) (Seat and over to be measured and paid for separately) as per HP. PWD. specifications of 1990 volume-I including carriage of materials, labour, tool and plant through all modes of transportion within all leads and lifts and as per direction of Engineer-in- Charge. Ordinary closet. |
| 57 | Providing and fixing high pressure PVC spigot and socket, waste and ventilating pipes ISI marked including fixing with approved adhesive etc. complete, including carriage of materials ,labour ,tool and plants through all modes of transportation with in all leads and lifts, and as per direction of the Engineer-in-charge. (a)75mm dia |
| 58 | (b)110mm dia |
| 59 | Providing and fixing PVC fittings and accessories with approved adhesive etc : (a) PVC plain bend ISI marked including fixing with approved adhesive etc. complete, including carriage of materials ,labour ,tool and plants through all modes of transportation with in all leads and lifts, and as per direction of the Engineer-in-charge. (i)75 mm nominal dia. |
| 60 | (ii)110mm nominal dia. |
| 61 | (b)PVC single equal branch plain ISI marked including fixing with approved adhesive etc. complete, including carriage of materials ,labour ,tool and plants through all modes of transportation with in all leads and lifts, and as per direction of the Engineer-in-charge. (i)75mm nominal size. |
| 62 | (ii)110mm nominal dia. |
| 63 | (c)PVC door bend with oval access door, insertion rubber washer 3 mm (Three millimeter) thick bolts and nuts ISI marked complete including fixing with approved adhesive etc. complete, including carriage of materials ,labour ,tool and plants through all modes of transportation with in all leads and lifts, and as per direction of the Engineer-in-charge. (i)75mm nominal size. |
| 64 | (ii)110mm nominal dia. |
| 65 | Constructing brick masonary chamber 455x610x450mm (Four hundred fifty five into six hundred ten into four hundred fifty millimeter) inside size for C.I./PVC inspection chamber and bends with common clay building bricks of 115mm (one hundred fifteen millimeter) thick walls in cement mortar 1:5 ( one cement : fine sand) C.I. cover with frame (light duty) 355mm x 610mm (Three hundred fifty five into six hundred ten millimeter) internal dimension total weight of cover with frame not less than 38 Kg (Weight of cover 23 Kg and weight of frame 15 Kg) in Reinforeced Cement concrete slab 1:2:4 graded stone aggregate 20mm (Twenty millimeter) nominal size) foundation concrete 1:5:10 and inside palstering with cement mortar 1:3 finished with a floating coat of neat cement including carriage of materials ,labour ,tool and plants through all modes of transportation with in all leads and lifts, and as per direction of the Engineer-in-charge. |
| 66 | Providing and fixing PVC water storage tank of 1000 litres capacity ISI: 12701 marked, G.I. inlet and outlet connection, 15 mm (Fifteen millimeter) nominal bore ball valve and mosquito proof PVC cover with locking arrangement including hoisting up to all heights above ground level including carriage of materials ,labour ,tool and plants through all modes of transportation with in all leads and lifts, and as per direction of the Engineer-in-charge. |
| 67 | Providing and fixing plastic seat (Solid/Hollow type) and cover for wash down water closet with C.P. Brass hinges and rubber buffers:1 SOLID TYPE Whiite plastic seat and cover, including carriage of materials ,labour ,tool and plants through all modes of transportation with in all leads and lifts, and as per direction of the Engineer-in-charge. |
| 68 | Providing and fixing M.I. Union for wash basin or sink 32 mm dia (Thirty two millimeter diameter) including carriage of materials ,labour ,tool and plants through all modes of transportation with in all leads and lifts, and as per direction of the Engineer-in-charge. |
| 69 | Providing and fixing PTMT jet spray of approved quality with one meter tube, including carriage of materials ,labour ,tool and plants through all modes of transportation with in all leads and lifts, and as per direction of the Engineer-in-charge. Please Enable Macros to View BoQ information |
