|
| 1 | Earth work in excavation of foundation of structures as per drawing and technical specification, including setting out, construction of shoring and bracing, removal of stumps and other deleterious matter, dressing of sides and bottom and backfilling with approved material as per S.I. No. 251. |
| 2 | Cement concrete with 4cm gauge approved stone ballast, approved fine sand, cement in the proportion 8:4:1 including supply of all materials, labour and tools and plants etc. required for proper completion of the work. SI No. 281 |
| 3 | M-150 brick work in One part cement and Six part Fine sand in foundation and plinth including supply of all materials, labour & T&P required for proper completion of work as per SI.No. 303 |
| 4 | M-150 brick work in One part cement and Six part Fine sand in superstructure including supply of all materials, labour & T&P required for proper completion of work as per SI.No. 303 & 310. |
| 5 | 12 mm thick plaster with cement and approved course sand in proportion 1:4 over brick work minimum thickness not to be less than 1 cm including supply of all materials labour and T&P etc. required for proper completion of the work SI.NO. 584 |
| 6 | Cement concrete with 4cm gague approved stone ballast coarse sand and cement in proporation of 4:2:1 but with 2cm gaguge stone gritt instead of 4cm gauge stone ballast inculding supply of all materials labour and T&P etc for proper completion of work.As par S.I No-279A Ch.-05 |
| 7 | R.C.C raft foundation work in with cement approved coarse sand and 4Cm gauge approved stone grit in proporation of 1:1.5:3 in lintels of doors,windows and sunsheds excluding supply of reinforcement and lits bending but i/c its fixing and binding the same with 24 B.W.G.G.I Binding wire and i/c necessary centering and shuttering etc.and supply of all material, labour and T&P etc.requried for proper compaction of work.Binding wire of Supplied by the contractor free of cost. |
| 8 | R.C.C lighter beam having spans upto 6M work in with cement approved coarse sand and 2Cm gauge approved stone grit in proporation of 1:2:4 in lintels of doors,windows and sunsheds excluding supply of reinforcement and lits bending but i/c its fixing and binding the same with 24 B.W.G.G.I Binding wire and i/c necessary centering and shuttering etc.and supply of all material, labour and T&P etc.requried for proper compaction of work.Binding wire of Supplied by the contractor free of cost. |
| 9 | R.C.C work in T-beam Slab Roof with cement approved coarse sand and 2Cm gauge approved stone grit in proporation of 1:1.5:3 in lintels of doors,windows and sunsheds excluding supply of reinforcement and lits bending but i/c its fixing and binding the same with 24 B.W.G.G.I Binding wire and i/c necessary centering and shuttering etc.and supply of all material, labour and T&P etc.requried for proper compaction of work.Binding wire of Supplied by the contractor free of cost. |
| 10 | R.C.C work in Columns in 1:1.5:3 with cement approved coarse sand and 2Cm gauge approved stone grit in proporation of in lintels of doors,windows and sunsheds excluding supply of reinforcement and lits bending but i/c its fixing and binding the same with 24 B.W.G.G.I Binding wire and i/c necessary centering and shuttering etc.and supply of all material, labour and T&P etc.requried for proper compaction of work.Binding wire of Supplied by the contractor free of cost. |
| 11 | Mild steel or iron in plain work such as concrete or reinforced brick work (when not included in an over all rates) wrought to required shape as necessary including bending for proper completion of the work. As per S.I. No. 504 of Ch. 10. |
| 12 | Providing and fixing 1mm thich M.S. Sheet door with frame of 40x40x6mm (1½\\"x1½\\"x¼\\") angle iron 3.15 mm (1/8\\") thick M.S. gus set plate at the junction and corners including supply and fixing of necessary fittings. Lock rail of 15\\" length of oxidised iron and including pintels hooks at the top and applying priming coat of red lead paint on all sides complete. As per S.I. No. 517a |
| 13 | Providing & fixing 60micron powder coated Alluminium partly openable & oartly fixed door and window in hollow box section glazed with 5mm thick float glass fixed in EPDM gaskets with Alluminium beading counter sunk stainless steel screws rubber weather strips rawl plugs gutties etc complete including cost of alluminium sub frame of size 76.20x24.40 x1.60mm size including supply of all material labour & T&P etc required for proper completion of work |
| 14 | Supply & fixing of stainless steel railling including supply of all material,labour and T&P etc.required for proper completion of work |
| 15 | Providing wall Putty on new srface with approved quality materail of berger/J.K/Birla or similar make 2 coat |
| 16 | Applying Oil Bond distempering/ snowcem with primer coat including supply of all material ,labour and T&P etc.required for proper completion of work |
| 17 | Applying primer coat over new steel and other metal surface after paint including preparing the surface by throughly cleaning oil grease dirt and other foreign matter and scoured with wire brushes fine steel/wood scrappers and paparing and knotting including coat of all and supply of all materials, labour and T&P etc. required for proper completion of work. As per Ch. 15 S.I. No. 20-1(a)+2+3(ii). |
| 18 | Supply and fixing 6 to 8 mm thick ivory or light shades vitrified tiles 600x600 mm size in flooring and skirting with 1:3 approved cement and coarse sand mortar finished with in its cement colour slurry, jointing and polished of approved quality complete including supply of all materials, labour tools and plants etc. required for proper completion of the work as per direction of Engineer-in-charge. As per Ch. 14 S.I. No. 22-5. |
| 19 | Supply and fixing 6 mm thick china glazed tiles of first quality in skiriting or dado ladi with 1:3 cement and approved coarse sand mortar finished with white cement slurry jointing and polishing complete including supply of all materials, labour and T&P etc. required for proper completion of the work. As per Ch. 14 S.I. No. 628 |
| 20 | Add Internal and External Elecrical Fittings @ 8% |
| 21 | Add Internal and External Sanitory Fittings @ 8% |
| 22 | Add Say amount Please Enable Macros to View BoQ information |
