Sales : +91-777 804 8217
| Sl. No. | Item Description |
| 1 | Clearing jungle including uprooting of rank vegetation, grass, brush wood, trees and saplings of girth up to 30 cm measured at a height of 1 m above ground level and removal of rubbish up to a distance of 50 m outside the periphery of the area cleared. (CCL SOR 2025 2.31) |
| 2 | Filling available excavated earth (excluding rock) in trenches, plinth, sides of foundations etc. in layers not exceeding 20cm in depth, consolidating each deposited layer by ramming and watering, lead up to 50 and for all lif.(CCL SOR 2025 2.25) |
| 3 | Earth work in excavation by mechanical means (Hydraulic excavator) / manual means in foundation trenches or drains (not exceeding 1.5 m in width or 10 sqm on plan), including dressing of sides and ramming of bottoms, for all lift, including getting out the excavated soil and disposal of surplus excavated soil as directed, within a lead of 50 m. All kinds of soil.(CCL SOR 2025 2.8.1) |
| 4 | Earth work in excavation by mechanical means (Hydraulic excavator)/ manual means over areas (exceeding 30 cm in depth, 1.5 m in width as well as 10 sqm on plan) including getting out and disposal of excavated earth lead upto 50 m and for all lift, as directed by Engineer-in-charge. All kinds of soil All kinds of soil(CCL SOR 2025 2.6.1) |
| 5 | Surface dressing of the ground including removing vegetation and in- equalities not exceeding 15 cm deep and disposal of rubbish, lead up to 50 m and lift up to 1.5 m. All kinds of soil(CCL SOR 2025 2.28.1) |
| 6 | Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level : 1:2:4 (1 cement : 2 coarse sand (zone-Ill) derived from natural sources : 4 graded stone aggregate 20 mm nominal size derived from natural sources) (CCL SOR 2025 4.1.3) |
| 7 | Providing and fixing up to floor five level precast cement concrete string or lacing courses, copings, bed plates, anchor blocks, plain window sills, shelves, louvers, steps, stair cases, etc., including hoisting and setting in position with cement mortar 1:3 (1 Cement : 3 coarse sand), cost of required Centering complete. 1:1.5:3 (1 cement : 1.5 coarse sand (zone-III) derived from natural sources : 3 graded stone aggregate 20 mm nominal size derived from natural sources) (CCL SOR 2025 4.5.1) |
| 8 | Providing and laying in position specified grade of reinforced cement concrete, excluding the cost of centering, shuttering, finishing and reinforcement - All work up to plinth level : 1:2:4 (1 cement : 2 coarse sand (zone-Ill) derived from natural sources : 4 graded stone aggregate 20 mm nominal size derived from natural sources)(CCL SOR 2025 5.1.3) |
| 9 | Centering and shuttering including strutting, propping etc. and removal of form for Foundations, footings, bases of columns, etc. for mass concrete(CCL SOR 2025 5.9.1) |
| 10 | Centering and shuttering including strutting, propping etc. and removal of form forWalls (any thickness) including attached pilasters, butteresses, plinth and string courses etc.(CCL SOR 2025 5.9.2) |
| 11 | Centering and shuttering including strutting, propping etc. and removal of form for Suspended floors, roofs, landings, balconies and access platform(CCL SOR 2025 5.9.3) |
| 12 | Centering and shuttering including strutting, propping etc. and removal of form for Shelves (Cast in situ)(CCL SOR 2025 5.9.4) |
| 13 | Centering and shuttering including strutting, propping etc. and removal of form for Lintels, beams, plinth beams, girders, bressumers and cantilevers (CCL SOR 2025 5.9.5) |
| 14 | Centering and shuttering including strutting, propping etc. and removal of form for Columns, Pillars, Piers, Abutments, Posts and Struts(CCL SOR 2025 5.9.6) |
| 15 | Steel reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding all complete upto plinth level. Thermo-Mechanically Treated bars of grade Fe-500D or more.(CCL SOR 2025 5.22.6) |
| 16 | Providing and fixing aluminium extruded section body tubular type universal hydraulic door closer (having brand logo with ISi, IS : 3564, embossed on the body, door weight upto 36 kg to 80 kg and door width from 701 mm to 1000 mm), with double speed adjustment with necessary accessories and screws etc. complete.(CCL SOR 2025 9.84) |
| 17 | Providing and fixing factory made P.V.C. door frame of size 50x47 mm with a wall thickness of 5 mm, made out of extruded 5 mm rigid PVC foam sheet, mitred at corners and joined with 2 Nos of 150 mm long brackets of 15x15 mm M.S. square tube, the vertical door frame profiles to be reinforced with 19x19 mm M.S. square tube of 19 gauge, EPDM rubber gasket weather seal to be provided through out the frame. The door frame to be fixed to the wall using M.S. screws of 65/100 mm size, complete as per manufacturer's specification and direction of Engineer- in-Charge.(CCL SOR 2025 9.119) |
| 18 | 24 mm thick factory made PVC door shutters made of styles cleats. The shutter frame filled and rails of a uPVC hollow section of size 59x24 mm and wall thickness 2 mm (± 0.2 mm) with inbuilt edging on both sides. The styles and rails mitred and joint at the corners by means of M.S. galvanised/ plastic brackets of size 75x220 mm having wall thickness 1.0 mm and stainless steel screws. The styles of the shutter reinforced by inserting galvanised M.S. tube of size 20x20 mm and 1 mm (± 0.1 mm) wall thickness. The lock rail made up of 'H' section, a uPVC hollow section of size 100x24 mm and 2 mm (± 0.2 mm) wall thickness, fixed to the shutter styles by means of plastic/galvanised M.S. with a uPVC multi-chambered single panel of size not less than 620 mm, having over all thickness of 20 mm and 1 mm (± 0.1 mm) wall thickness. The panels filled vertically and tie bar at two places by inserting horizontally 6 mm galvanised M.S. rod and fastened with nuts and washers, complete as per manufacturer's specification and direction of Engineer- in-charge. (For W.C. and bathroom door shutter).(CCL SOR 2025 9.118.1) |
| 19 | Providing and fixing powder coated telescopic drawer channels 300 mm long with necessary screws etc. complete as per directions of Engineer- in-charge,(CCL SOR 2025 9.115) |
| 20 | Providing and fixing sliding arrangement in racks/ cupboards/cabinets shutter with stainless steel rollers to run inside C or E aluminium channel section (The payment of C or E channel shall be made separately)(CCL SOR 2025 9.116) |
| 21 | Providing and fixing M.S. grills of required pattern in frames of windows etc. with M.S. flats, square or round bars etc. including priming coat with approved steel primer all complete. Fixed to openings /wooden frames with rawl plugs screws etc.(CCL SOR 2025 9.48.2) |
| 22 | Providing and fixing aluminium hanging floor door stopper, ISI marked, anodised (anodic coating not less than grade AC 10 as per IS : 1868) transparent or dyed to required colour and shade, with necessary screws etc. complete. Twin rubber stopper(CCL SOR 2025 9.101.2) |
| 23 | Providing and fixing special quality chromium plated brass cupboard locks with six levers of approved quality including necessary screws etc. complete. Size 75 mm(CCL SOR 2025 9.90.4) |
| 24 | Providing and fixing special quality chromium plated brass cupboard locks with six levers of approved quality including necessary screws etc. complete. Size 50 mm(CCL SOR 2025 9.90.2) |
| 25 | Providing and fixing ISI marked aluminium butt hinges anodised (anodic coating not less than grade AC 10 as per IS: 1868) transparent or dyed to required colour or shade with necessary screws etc. complete: Note :- Aluminum hinges shall not be used in wooden shutters, stainless steel hinges shall be preferred. 125x63x4 mm(CCL SOR 2025 9.95.2) |
| 26 | Providing and fixing ISI marked aluminium butt hinges anodised (anodic coating not less than grade AC 10 as per IS: 1868) transparent or dyed to required colour or shade with necessary screws etc. complete: Note :- Aluminum hinges shall not be used in wooden shutters, stainless steel hinges shall be preferred. 100x63x4 mm (CCL SOR 2025 9.95.4) |
| 27 | Providing and fixing IS : 12817 marked stainless steel butt hinges with stainless steel screws etc. complete : 75x47x1.80 mm(CCL SOR 2025 9.70.3) |
| 28 | Providing and fixing IS : 12817 marked stainless steel butt hinges with stainless steel screws etc. complete : 125x64x1.90 mm(CCL SOR 2025 9.70.1) |
| 29 | Providing and fixing aluminium sliding door bolts, ISI marked anodised (anodic coating not less than grade AC 10 as per IS: 1868), transparent or dyed to required colour or shade, with nuts and screws etc. complete : 250x16 mm(CCL SOR 2025 9.96.2) |
| 30 | Providing and fixing aluminium tower bolts, ISI marked, anodised (anodic coating not less than grade AC 10 as per IS : 1868 ) transparent or dyed to required colour or shade, with necessary screws etc. complete : 150x10 mm(CCL SOR 2025 9.97.4) |
| 31 | Providing and fixing aluminium tower bolts, ISI marked, anodised (anodic coating not less than grade AC 10 as per IS : 1868 ) transparent or dyed to required colour or shade, with necessary screws etc. complete : 250x10 mm(CCL SOR 2025 9.97.2) |
| 32 | Providing and fixing aluminium tower bolts, ISI marked, anodised (anodic coating not less than grade AC 10 as per IS : 1868 ) transparent or dyed to required colour or shade, with necessary screws etc. complete : 200x10 mm(CCL SOR 2025 9.97.3) |
| 33 | Providing and fixing aluminium handles, ISI marked, anodised (anodic coating not less than grade AC 10 as per IS : 1868) transparent or dyed to required colour or shade, with necessary screws etc. complete : 125 mm(CCL SOR 2025 9.100.1) |
| 34 | Providing and fixing magnetic catcher of approved quality in cupboard/ ward robe shutters, including fixing with necessary screws etc. complete. Double strip (horizontal type)(CCL SOR 2025 9.114.2) |
| 35 | Providing & Fixing decorative high pressure laminated sheet of plain / wood grain in gloss / matt/ suede finish with high density protective surface layer and reverse side of adhesive bonding quality conforming to IS : 2046 Type S, including cost of adhesive of approved quality. 1.0 mm thick(CCL SOR 2025 9.127.2) |
| 36 | Providing and fixing anodised aluminium grill (anodised transparent or dyed to required shade according to IS: 1868 with minimum anodic coating of grade AC 15) of approved design/pattern, with approved standard section and fixed to the existing window frame with C.P. brass/ stainless steel screws @ 200 mm centre to centre, including cutting the grill to proper opening size for fixing and operation of handles and fixing approved anodised aluminium standard section around the opening, all complete as per requirement and direction of Engineer-in-charge. (Only weight of grill to be measured for payment).(CCL SOR 2025 (CCL SOR 2025 21.17) |
| 37 | Providing and fixing 12 mm thick frameless toughened glass door shutter of approved brand and manufacture, including providing and fixing top & bottom pivot & double acting hydraulic floor spring type fixing arrangement and making necessary holes etc. for fixing required door fittings, all complete as per direction of Engineer-in-charge (Door handle, lock and stopper etc.to be paid separately).(CCL SOR 2025 21.18) |
| 38 | Providing and fixing aluminium work for doors, windows, ventilators and partitions with extruded built up standard tubular sections/ appropriate Z sections and other sections of approved make conforming to IS: 733 and IS: 1285, fixing with dash fasteners of required dia and size, including necessary filling up the gaps at junctions, i.e. at top, bottom and sides with required EPDM rubber/ neoprene gasket etc. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, Aluminium snap beading for glazing / panelling, C.P. brass / stainless steel screws, all complete as per architectural drawings and the directions of Engineer-in-charge. (Glazing, paneling and dash fasteners to be paid for separately) : For fixed portion Powder coated aluminium (minimum thickness of powder coating 50 micron)(CCL SOR 2025 21.1.1.2) |
| 39 | Providing and fixing aluminium work for doors, windows, ventilators and partitions with extruded built up standard tubular sections/ appropriate Z sections and other sections of approved make conforming to IS: 733 and IS: 1285, fixing with dash fasteners of required dia and size, including necessary filling up the gaps at junctions, i.e. at top, bottom and sides with required EPDM rubber/ neoprene gasket etc. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, Aluminium snap beading for glazing / panelling, C.P. brass / stainless steel screws, all complete as per architectural drawings and the directions of Engineer-in-charge. (Glazing, paneling and dash fasteners to be paid for separately) : Powder coated aluminium (minimum thickness of powder coating 50 micron)(CCL SOR 2025 21.1.2.2) |
| 40 | Providing and fixing 12 mm thick prelaminated particle board flat pressed three layer or graded wood particle board conforming to IS: 12823 Grade l Type ll, in panelling fixed in aluminum doors, windows shutters and partition frames with C.P. brass / stainless steel screws etc. complete as per architectural drawings and directions of engineer-in-charge.Pre-laminated particle board with decorative lamination on both sides (CCL SOR 2025 21.2.2) |
| 41 | Providing and fixing glazing in aluminium door, window, ventilator shutters and partitions etc. with EPDM rubber / neoprene gasket etc. complete as per the architectural drawings and the directions of engineer-in-charge . (Cost of aluminium snap beading shall be paid in basic item): With float glass panes of 4.0 mm thickness (weight not less than 10kg/sqm)(CCL SOR 2025 21.3.1) |
| 42 | Providing and fixing double action hydraulic floor spring of approved brand and manufacture conforming to IS : 6315, having brand logo embossed on the body / plate with double spring mechanism and door weight upto 125 kg, for doors, including cost of cutting floors, embedding in floors as required and making good the same matching to the existing floor finishing and cover plates with brass pivot and single piece M.S. sheet outer box with slide plate etc. complete as per the direction of Engineer- in-charge. With stainless steel cover plate minimum 1.25 mm thickness(CCL SOR 2025 21.4.1) |
| 43 | Providing and fixing chromium plated brass handles with necessary screws etc. complete: 125 mm(CCL SOR 2025 9.92.1) |
| 44 | Providing and fixing chromium plated brass handles with necessary screws etc. complete: 100 mm(CCL SOR 2025 9.92.2) |
| 45 | Providing and fixing fly proof stainless steel grade 304 wire gauge, to windows and clerestory windows using wire gauge with average width of aperture 1.4 mm in both directions with wire of dia. 0.50 mm all complete. With 12 mm mild steel U beading(CCL SOR 2025 9.135.2) |
| 46 | Providing and fixing 19 mm thick ply board of Greenply or equivalent of any other brand, treated for borer, termite and fungus proof, boiling water proof with fire retardant properties, in shelves with screws and fittings wherever required, edges to be painted with polyurethane primer (fittings to be paid separately)(CCL SOR 2025 sub volume-v:New item-95) |
| 47 | Providing and fixing 12 mm thick plywood of Greenply or equivalent of any other brand, treated for borer, termite and fungus proof, boiling water proof with fire retardant properties, in shelves with screws and fittings wherever required, edges to be painted with polyurethane primer (fittings to be paid separately(CCL SOR 2025 sub volume-v:New item-94) |
| 48 | Providing and fixing 6 mm thick plywood of Greenply or equivalent of any other brand, treated for borer, termite and fungus proof, boiling water proof with fire retardant properties, in shelves with screws and fittings wherever required, edges to be painted with polyurethane primer (fittings to be paid separately)(CCL SOR 2025 sub volume-v:New item-93) |
| 49 | Supply & fixing of roller blind blackout collection of marvel Décor / SSG or equivalent with cassette all complete as per instruction of EIC.(CCL SOR 2025 sub volume-v:New item-97) |
| 50 | Providing stainlesss Stainless Steel 304 Glass Door Pull Handle (450mm) and dia 38 mm including all necessary fittings all complete as per direction of EIC. (Analyzed Rate) |
| 51 | Providing and fixing bottom door lock for toughened glass door all complete as per direction of EIC. (Analyzed Rate) |
| 52 | Providing and fixing partition upto ceiling height consisting of G.I. frame and required board, including providing and fixing of frame work made of special section power pressed/ roll form G.I. sheet with zinc coating of 120 gms/sqm(both side inclusive), consisting of floor and ceiling channel 50 mm wide having equal flanges of 32 mm and 0.50 mm thick, fixed to the floor and ceiling at the spacing of 610 mm centre to centre with dash fastener of 12.5 mm dia meter 50 mm length or suitable anchor fastener or metal screws with nylon plugs and the studs 48 mm wide having one flange of 34 mm and other flange 36 mm and 0.50 mm thick fixed vertically within flanges of floor and ceiling channel and placed at a spacing of 610 mm centre to centre by 6 mm dia bolts and nuts, including fixing of studs along both ends of partition fixed flush to wall with suitable anchor fastener or metal screws with nylon plugs at spacing of 450 mm centre to centre, and fixing of boards to both side of frame work by 25 mm long dry wall screws on studs, floor and ceiling channels at the spacing of 300 mm centre to centre. The boards are to be fixed to the frame work with joints staggered to avoid through cracks, M.S. fixing channel of 99 mm width (0.9 mm thick having two flanges of 9.5 mm each) to be provided at the horizontal joints of two boards, fixed to the studs using metal to metal flat head screws, including jointing and finishing to a flush finish with recommended jointing compound, jointing tape, angle beads at corners (25 mm x 25 mm x 0.5 mm), joint finisher and two coats of primer suitable for board as per manufacture's specification and direction of engineer in charge all complete. 75 mm overall thickness partition with 12.5 mm thick double skin tapered edged plain Gypsum plaster board conforming to IS: 2095: (part I): 2011 (Board with BIS certification marks)(CCL SOR 2025 9.105.2) |
| 53 | Supply and fixing Wall paper all complete as per instrection of EIC. (CCL SOR 2025 sub volume-v:New item-98) |
| 54 | Supply of Mortice lock (Godrej or its equvailent) as per instruction of EIC.(CCL SOR 2025 sub volume-v:New item-99) |
| 55 | Supply and fixing polished table top glass as per instruction of EIC. (Analyzed Rate) |
| 56 | Providing and fixing ISI marked flush door shutters conforming to IS : 2202 (Part I) non-decorative type, core of block board construction with frame of 1st class hard wood and well matched commercial 3 ply veneering with vertical grains or cross bands and face veneers on both faces of shutters: 35 mm thick including ISI marked Stainless Steel butt hinges with necessary screws(CCL SOR 2025 9.20.1) |
| 57 | Deployment of 1 (one) no. carpenter (skilled manpower) and 1 (one) no. carpenter helper (unskilled manpower) in general shift for day to day maintenance work related to carpentary work like repairing of door, window, fixing of door and window fittings as and when required as per instruction of EIC. (CCL SOR 2025 sub volume-v:New item-27 |
| 58 | Structural steel work in single section, fixed with or without connecting plate, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer all complete. (CCL SOR 2025 10.1) |
| 59 | Structural steel work riveted, bolted or welded in built up sections, trusses and framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer all complete(CCL SOR 2025 10.2) |
| 60 | Providing and fixing stainless steel ( Grade 304) railing made of Hollow tubes, channels, plates etc., including welding, grinding, bufing, polishing and making curvature (wherever required) and fitting the same with necessary stainless steel nuts and bolts complete, i/c fixing the railing with necessary accessories & stainless steel dash fasteners , stainless steel bolts etc., of required size, on the top of the floor or the side of waist slab with suitable arrangement as per approval of Engineer-in-charge, (for payment purpose only weight of stainless steel members shall be considered excluding fixing accessories such as nuts, bolts, fasteners etc.).(CCL SOR 2025 10.28) |
| 61 | Providing and fixing precoated galvanised iron profile sheets (size, shape and pitch of corrugation as approved by Engineer-in-Charge) of total coated thickness 0.50 mm (base metal of minimum 0.45 mm thickness with total coating thickness of 0.05mm) with zinc coating 120 grams per sqm as per IS: 277, in 240 mpa steel grade, 5-7 microns epoxy primer on both side of the sheet and polyester top coat 15-18 microns. Sheet should have protective guard film of 25 microns minimum to avoid scratches during transportation and should be supplied in single length upto 12 metre or as desired by Engineer-in-charge. The sheet shall be fixed using self drilling /self tapping screws of size (5.5x 55 mm) with EPDM seal, complete upto any pitch in horizontal/ vertical or curved surfaces, excluding the cost of purlins, rafters and trusses and including cutting to size and shape wherever required.(CCL SOR 2025 12.50) |
| 62 | Providing and fixing false ceiling at all heights including providing and fixing of frame work made of special sections, power pressed from M.S. sheets and galvanized with zinc coating of 120 gms/sqm (both side inclusive) as per IS : 277 and consisting of angle cleats of size 25 mm wide x 1.6 mm thick with flanges of 27 mm and 37mm, at 1200 mm centre to centre, one flange fixed to the ceiling with dash fastener 12.5 mm dia x 50 mm long with 6 mm dia bolts, other flange of cleat fixed to the angle hangers of 25x10x0.50 mm of required length with nuts & bolts of required size and other end of angle hanger fixed with intermediate G.I. channels 45x15x0.9 mm running at the spacing of 1200 mm centre to centre, to which the ceiling section 0.5 mm thick bottom wedge of 80 mm with tapered flanges of 26 mm each having lips of 10.5 mm, at 450 mm centre to centre, shall be fixed in a direction perpendicular to G.I. intermediate channel with connecting clips made out of 2.64 mm dia x 230 mm long G.I. wire at every junction, including fixing perimeter channels 0.5 mm thick 27 mm high having flanges of 20 mm and 30 mm long, the perimeter of ceiling fixed to wall/partition with the help of rawl plugs at 450 mm centre, with 25 mm long dry wall screws @ 230 mm interval, including fixing of gypsum board to ceiling section and perimeter channel with the help of dry wall screws of size 3.5 x 25 mm at 230 mm c/c, including jointing and finishing to a flush finish of tapered and square edges of the board with recommended jointing compound , jointing tapes , finishing with jointing compound in 3 layers covering upto 150 mm on both sides of joint and two coats of primer suitable for board, all as per manufacturer's specification and also including the cost of making openings for light fittings, grills, difusers, cutouts made with frame of perimeter channels suitably fixed, all complete as per drawings, specification and direction of the Engineer in Charge but excluding the cost of painting with :12.5 mm thick tapered edge gypsum plain board conforming to IS: 2095- (Part I) :2011 (Board with BIS certification marks)(CCL SOR 202512.45.1) |
| 63 | Providing and fixing precoated galvanised steel sheet roofing accessories of total coated thickness 0.50 mm (base metal of minimum 0.45 mm thickness with total coating thickness of 0.05 mm) with Zinc coating 120 gram per sqm as per IS: 277, in 240 mpa steel grade, 5-7 microns epoxy primer on both side of the sheet and polyester top coat 15-18 microns using self drilling/ self tapping screws complete : Ridges plain (500- 600mm)(CCL SOR 2025 12.51.1) |
| 64 | Grading roof for water proofing treatment with Cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size)(CCL SOR 2025 22.14.1) |
| 65 | Dry brick on edge flooring in required pattern with bricks of class designation 5.00 on a bed of 12 mm mud mortar, including filling joints with Jamuna sand, with common burnt clay non modular bricks.(CCL SOR 2025 11.2) |
| 66 | Cement concrete flooring 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate) finished with a floating coat of neat cement, including cement slurry, but excluding the cost of nosing of steps etc. complete. 40 mm thick with 20 mm nominal size stone aggregate(CCL SOR 2025 11.3.1) |
| 67 | Chequerred precast cement concrete tiles 22 mm thick in footpath & courtyard, jointed with neat cement slurry mixed with pigment to match the shade of tiles, including rubbing and cleaning etc. complete, on 20 mm thick bed of cement mortar 1:4 (1 cement: 4 coarse sand). Ordinary cement without any pigment(CCL SOR 2025 11.20.4) |
| 68 | Providing and fixing 18 mm thick gang saw cut, mirror polished, premoulded and prepolished, machine cut for kitchen platforms, vanity counters, window sills, facias and similar locations of required size, approved shade, colour and texture laid over 20 mm thick base cement mortar 1:4 (1 cement : 4 coarse sand), joints treated with white cement, mixed with matching pigment, epoxy touch ups, including rubbing, curing, moulding and polishing of edges to give high gloss finish etc. complete at all levels. Granite stone slab of colour black, Cherry/Ruby red Area of slab upto 0.50 sqm (CCL SOR 2025 8.2.2.1) |
| 69 | Providing and fixing 18 mm thick gang saw cut, mirror polished, premoulded and prepolished, machine cut for kitchen platforms, vanity counters, window sills, facias and similar locations of required size, approved shade, colour and texture laid over 20 mm thick base cement mortar 1:4 (1 cement : 4 coarse sand), joints treated with white cement, mixed with matching pigment, epoxy touch ups, including rubbing, curing, moulding and polishing of edges to give high gloss finish etc. complete at all levels. Granite stone slab of colour black, Cherry/Ruby red Area of slab over 0.50 sqm(CCL SOR 2025 8.2.2.2) |
| 70 | Providing and fixing 1st quality ceramic glazed wall tiles conforming to IS: 15622 (thickness to be specified by the manufacturer), of approved make, in all colours, shades except burgundy, bottle green, black of any size as approved by Engineer-in-Charge, in skirting, risers of steps and dados, over 12 mm thick bed of cement mortar 1:3(1 cement : 3 coarse sand) and jointing with grey cement slurry @ 3.3kg per sqm, including pointing in white cement mixed with pigment of matching shade complete.(CCL SOR 2025 8.31) |
| 71 | Providing and laying Ceramic glazed floor tiles of size 300x300 mm (thickness to be specified by the manufacturer) of 1st quality conforming to IS : 15622 of approved make in colours such as White, Ivory, Grey, Fume Red Brown, laid on 20 mm thick cement mortar 1:4 (1 Cement :4 Coarse sand), Jointing with grey cement slurry @ 3.3 kg/sqm including pointing the joints with white cement and matching pigment etc., complete.(CCL SOR 2025 11.37) |
| 72 | Providing and laying vitrified floor tiles in diferent sizes (thickness to be specified by the manufacturer) with water absorption less than 0.08% and conforming to IS: 15622, of approved make, in all colours and shades, laid on 20 mm thick cement mortar 1:4 (1 cement : 4 coarse sand), jointing with grey cement slurry @ 3.3 kg/ sqm including grouting the joints with white cement and matching pigments etc., complete. Size of Tile 600x600 mm (CCL SOR 202511.41.2) |
| 73 | Providing and laying Vitrified tiles in diferent sizes (thickness to be specified by manufacturer), with water absorption less than 0.08 % and conforming to I.S. 15622, of approved make, in all colours & shade, in skirting, riser of steps, over 12 mm thick bed of cement mortar 1:3 (1 cement: 3 coarse sand), jointing with grey cement slurry @ 3.3 kg/ sqm including grouting the joint with white cement & matching pigments etc. complete.Size of Tile 600x600 mm(CCL SOR 2025 11.46.2) |
| 74 | Providing and laying matt finished vitrified tile of size 300x300x9.8 mm having with water absorption less than 0.5% and conforming to IS: 15622 of approved make in all colours and shades in for outdoor floors such as footpath, court yard, multi modals location etc., laid on 20 mm thick base of cement mortar 1:4 (1 cement : 4 coarse sand) in all shapes & patterns including grouting the joints with white cement mixed with matching pigments etc. complete as per direction of Engineer-in-Charge.(CCL SOR 2025 16.89) |
| 75 | Providing and laying 60 mm thick faciory made cement concrete interlocking paver block of M -30 grade made by block making machine with strong vibratory compaction, of approved size, design & shape, laid in required colour and pattern over and including 50 mm thick compacted bed of coarse sand, filling the joints with line sand etc. all complete as per the direction of Engineer-in-charge.(CCL SOR 2025 16.68) |
| 76 | Taking out existing CC interlocking paver blocks from footpath/ central verge, including removal of rubbish etc., disposal of unserviceable material to the dumping ground, for which payment shall be made separately and stacking of serviceable material within 50 metre lead as per direction of Engineer-in-Charge. (CCL SOR 2025(CCL SOR 2025 16.83) |
| 77 | Laying old cement cocrete interlocking paver blocks of any design/ shape laid in required line, level, curvature, colour and pattern over and including 50 mm thick compacted bed of coarse sand, filling the joints with fine sand etc. all complete as per the direction of Engineer-in-charge. (Old CC paver blocks shall be supplied by the department free of cost).(CCL SOR 2025 16.84) |
| 78 | Wall painting with premium acrylic emulsion paint of interior grade, having VOC (Volatile Organic Compound ) content less than 50 grams/ litre of approved brand and manufacture, including applying additional coats wherever required to achieve even shade and colour. Two coats(CCL SOR 2025 13.83.2) |
| 79 | Wall painting with premium acrylic emulsion paint of interior grade, having VOC (Volatile Organic Compound ) content less than 50 grams/ litre of approved brand and manufacture, including applying additional coats wherever required to achieve even shade and colour One coat(CCL SOR 2025 13.83.1) |
| 80 | Distempering with 1st quality acrylic distemper (ready mixed) having VOC (Volatile Organic Compound ) content less than 50 gram/ litre, of approved brand and manufacturer including applying additional coats wherever required to achieve even shade and colour Old work (one or more coats) (CCL SOR 2025 13.81.1) |
| 81 | Finishing walls with Acrylic Smooth exterior paint of required shade: New work (Two or more coat applied @ 1.67 ltr/10 sqm over and including priming coat of exterior primer applied @ 0.90 litre/10 sqm)(CCL SOR 2025 13.46.1) |
| 82 | Finishing walls with Premium Acrylic Smooth exterior paint with Silicone additives of required shade Old work (one or more coats applied @ 0.83 Itr/10 sqm).(CCL SOR 2025 13.112.2) |
| 83 | Finishing walls with water proofing cement paint of required shade: Old work (one or more coats @ 2.20 kg/10 sqm) complete.(CCL SOR 2025 13.109.2) |
| 84 | Painting with synthetic enamel paint of approved brand and manufacture of required colour to give an even shade: One or more coats on old work(CCL SOR 2025 13.99.1) |
| 85 | Painting with synthetic enamel paint of approved brand and manufacture to give an even shade : Two or more coats on new work(CCL SOR 2025 13.61.1) |
| 86 | Applying priming coats with primer of approved brand and manufacture, having low VOC (Volatile Organic Compound ) content. With water thinnable cement primer on wall surface having VOC content less than 50 grams/litre(CCL SOR 2025 13.85.3) |
| 87 | Providing and applying white cement based putty of average thickness 1 mm, of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete.(CCL SOR 2025 13.80) |
| 88 | Painting with silicon & acrylic emulsion based water thinnable sealer of approved brand and manufacture on wet or patchy portion of plastered surfaces: Two coats(CCL SOR 2025 13.51.2) |
| 89 | Melamine polishing on wood work (one or more coat).(CCL SOR 2025 13.114) |
| 90 | 12 mm cement plaster of mix: 1:6(1 cement: 6 fine sand)(CCL SOR 2025 13.1.2) |
| 91 | 1:3(1 cement :3 fine sand) 1:3(1 cement :3 fine sand)(CCL SOR 2025 13.16.1) |
| 92 | Cement plaster 1:3(1 cement: 3 coarse sand) finished with a floating coat of neat cement. 12 mm cement plaster(CCL SOR 2025 13.9.1) |
| 93 | Neat cement punning.(CCL SOR 2025 13.18) |
| 94 | Repairs to plaster of thickness 12 mm to 20 mm in patches of area 2.5 sq.meters and under, including cutting the patch in proper shape, raking out joints and preparing and plastering the surface of the walls complete, including disposal of rubbish to the dumping ground, all complete as per direction of Engineer-in-Charge. With cement mortar 1:4 (1cement: 4 coarse sand) (CCL SOR 2025 14.1.2) |
| 95 | Removing dry or oil bound distemper, water proofing cement paint and the like by scrapping, sand papering and preparing the surface smooth including necessary repairs to scratches etc. complete.(CCL SOR 2025 13.91) |
| 96 | Demolishing R.C.C. work manually/ by mechanical means including stacking of steel bars and disposal of unserviceable material within 50 metres lead as per direction of Engineer - in- charge. (CCL SOR 2025 15.3) |
| 97 | Dismantling old plaster or skirting raking out joints and cleaning the surface for plaster including disposal of rubbish to the dumping ground within 50 metres lead. (CCL SOR 2025 15.56) |
| 98 | Dismantling aluminium/ Gypsum partitions, doors, windows, fixed glazing and false ceiling including disposal of unserviceable material and stacking of serviceable material with in 50 meters lead as directed by Engineer- in-charge.(CCL SOR 2025 15.57) |
| 99 | Demolishing cement concrete manually/ by mechanical means including disposal of material within 50 metres lead as per direction of Engineer - in - charge. Nominal concrete 1:3:6 or richer mix (including equivalent design mix) (CCL SOR 2025 15.2.1) |
| 100 | Demolishing brick work manually/ by mechanical means including stacking of serviceable material and disposal of unserviceable material within 50 metres lead as per direction of Engineer-in-charge. In cement mortar (CCL SOR 2025 15.7.4) |
| 101 | Dismantling doors, windows and clerestory windows (steel or wood) shutter including chowkhats, architrave, holdfasts etc. complete and stacking within 50 metres lead : Of area 3 sq. metres and below(CCL SOR 2025 15.12.1) |
| 102 | Dismantling doors, windows and clerestory windows (steel or wood) shutter including chowkhats, architrave, holdfasts etc. complete and stacking within 50 metres lead : Of area beyond 3 sq. metres(CCL SOR 2025 15.12.2) |
| 103 | Taking out doors, windows and clerestory window shutters (steel or wood) including stacking within 50 metres lead : Of area 3 sq. metres and below(CCL SOR 2025 15.13.1) |
| 104 | Taking out doors, windows and clerestory window shutters (steel or wood) including stacking within 50 metres lead : Of area beyond 3 sq. metres(CCL SOR 2025 15.13.2) |
| 105 | Dismantling steel work in built up sections in angles, tees, flats and channels including all gusset plates, bolts, nuts, cutting rivets, welding etc. including dismembering and stacking within 50 metres lead.(CCL SOR 2025 15.18) |
| 106 | Dismantling tile work in floors and roofs laid in cement mortar including stacking material within 50 metres lead. For thickness of tiles 10 mm to 25 mm(CCL SOR 2025 15.23.1) |
| 107 | Dismantling roofing including ridges, hips, valleys and gutters etc., and stacking the material within 50 metres lead of: G.S. Sheet(CCL SOR 2025 15.28.1) |
| 108 | Carriage of Materials By Mechanical Transport including loading,unloading and stacking Lime, moorum, building rubbish Lead - 5 km (CCL SOR 2025 1.1.1) |
| 109 | Half brick masonry with common burnt clay F.P.S. (non modular) bricks of class designation 5.00 in superstructure above plinth level up to floor V level. Cement mortar 1:4(1 cement :4 coarse sand)(CCL SOR 2025 6.13.2) |
| 110 | Half brick masonry with common burnt clay F.P.S. (non modular) bricks of class designation 5.00 in foundations and plinth in : cement mortar 1:4(1 cement :4 coarse sand) (CCL SOR 2025 6.12.2) |
| 111 | Brick work with common burnt clay F.P.S. (non modular) bricks of class designation 5.00 in foundation and plinth in: Cement mortar 1:6(1 cement :6 coarse sand) (CCL SOR 2025 6.1.2) |
| 112 | Brick work with common burnt clay F.P.S. (non modular) bricks of class designation 5.00 in superstructure above plinth level up to floor V level in all shapes and sizes in : Cement mortar 1:6(1 cement : 6 coarse sand)(CCL SOR 2025 6.4.2) |
| 113 | Felling trees of the girth (measured at a height of 1 m above ground level), including cutting of trunks and branches, removing the roots and stacking of serviceable material and disposal of unserviceable material. Beyond 60 cm girth upto and including 120 cm girth(CCL SOR 2025 2.33.2) |
| 114 | Dismantling of flushing cistern of all types (C.I./PVC/Vitrious China) including stacking of useful materials near the site and disposal of unserviceable materials within 50 metres lead. (CCL SOR 2025 15.52) |
| 115 | Providing and fixing brass bib cock of approved quality : 15 mm nominal bore (CCL SOR 2025 18.15.1) |
| 116 | Providing and fixing brass stop cock of approved quality : 15 mm nominal bore (CCL SOR 2025 18.16.1) |
| 117 | Providing and fixing C.P. brass bib cock of approved quality conforming to IS:8931 : 15 mm nominal bore (CCL SOR 2025 18.49.1) |
| 118 | Providing and fixing C.P. brass stop cock (concealed) of standard design and of approved make conforming to IS:8931.15 mm nominal bore (CCL SOR 2025 18.52.1) |
| 119 | Providing and fixing C.P. brass angle valve for basin mixer and geyser points of approved quality conforming to IS:8931 15 mm nominal bore (CCL SOR 2025 18.53.1) |
| 120 | Providing and fixing C.P. Brass extension nipple (size 15 mm x 50 mm) of approved make and quality as per direction of Engineer-in-charge. (CCL SOR 2025 18.53A) |
| 121 | Providing and fixing uplasticised PVC connection pipe with brass unions : 15 mm nominal bore(CCL SOR 2025 18.21.2.1) |
| 122 | Providing and fixing P.V.C. waste pipe for sink or wash basin including P.V.C. waste fittings complete. Flexible pipe 32 mm dia (CCL SOR 2025 17.28.2.1) |
| 123 | Providing and fixing PTMT Ball cock of approved quality, colour and make complete with Epoxy coated aluminium rod with L.P./ H.P.H.D. plastic ball 15 mm nominal bore, 105 mm long, weighing not less than 138 gms (CCL SOR 2025 18.62.1) |
| 124 | Providing and fixing PTMT Ball cock of approved quality, colour and make complete with Epoxy coated aluminium rod with L.P./ H.P.H.D. plastic ball. 25 mm nominal bore, 152 mm long, weighing not less than 440 gms (CCL SOR 2025 18.62.3) |
| 125 | Providing and fixing P.V.C. low level flushing cistern with manually controlled device (handle lever) conforming to IS : 7231, with all fittings and fixtures complete. 10 litre capacity - White(CCL SOR 2025 17.18.1) |
| 126 | Providing and fixing wash basin with C.I. brackets, 15 mm C.P. brass pillar taps, 32 mm C.P. brass waste of standard pattern, including painting of fittings and brackets, cutting and making good the walls wherever require: White Vitreous China Flat back wash basin size 550x 400 mm with single 15 mm C.P. brass pillar tap(CCL SOR 2025 17.7.4) |
| 127 | Providing and fixing solid plastic seat with lid for pedestal type W.C. pan complete : White solid plastic seat with lid (CCL SOR 2025 17.20.1) |
| 128 | Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply and all CPVC plain & brass threaded fittings, including fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and testing of joints complete as per direction of Engineer in Charge. Internal work - Exposed on wall 15 mm nominal dia Pipes(CCL SOR 2025 18.7.1) |
| 129 | Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply and all CPVC plain & brass threaded fittings, including fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and testing of joints complete as per direction of Engineer in Charge. Internal work - Exposed on wall 20 mm nominal dia Pipes(CCL SOR 2025 18.7.2) |
| 130 | Providing and fixing white vitreous china water closet squatting pan (Indian type) : Orissa pattern W.C. pan of size 580x440 mm(CCL SOR 2025 17.13.2) |
| 131 | Providing and fixing white vitreous china pedestal type (European type/ wash down type) water closet pan.(CCL SOR 2025 17.15) |
| 132 | Cutting holes up to 30x30 cm in walls including making good the same: With common burnt clay F.P.S. (non modular) bricks (CCL SOR 2025 18.76.1) |
| 133 | Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings and fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and the cost of cutting chases and making good the same including testing of joints complete as per direction of Engineer in Charge. Concealed work, including cutting chases and making good the walls etc.20 mm nominal dia Pipes(CCL SOR 2025 18.8.2) |
| 134 | Providing and fixing on wall face unplasticised Rigid PVC rain water pipes conforming to IS : 13592 Type A, including jointing with seal ring conforming to IS : 5382, leaving 10 mm gap for thermal expansion, (i) Single socketed pipes. 110 mm diameter (CCL SOR 2025 12.41.2) |
| 135 | Providing and fixing on wall face unplasticised Rigid PVC rain water pipes conforming to IS : 13592 Type A, including jointing with seal ring conforming to IS : 5382, leaving 10 mm gap for thermal expansion, (i) Single socketed pipes. 75 mm diameter(CCL SOR 2025 12.41.1) |
| 136 | Providing and fixing on wall face unplasticised - PVC moulded fittings/ accessories for unplasticised Rigid PVC rain water pipes conforming to IS : 13592 Type A, including jointing with seal ring conforming to IS :5382, leaving 10 mm gap for thermal expansion. Single tee without door 75x75x75 mm(CCL SOR 2025 12.42.4.1) |
| 137 | Providing and fixing on wall face unplasticised - PVC moulded fittings/ accessories for unplasticised Rigid PVC rain water pipes conforming to IS : 13592 Type A, including jointing with seal ring conforming to IS :5382, leaving 10 mm gap for thermal expansion. Single tee without door 110x110x110 mm(CCL SOR 2025 12.42.4.2) |
| 138 | Providing and fixing on wall face unplasticised - PVC moulded fittings/ accessories for unplasticised Rigid PVC rain water pipes conforming to IS : 13592 Type A, including jointing with seal ring conforming to IS :5382, leaving 10 mm gap for thermal expansion. Bend 87.5° 75 mm bend(CCL SOR 2025 12.42.5.1) |
| 139 | Providing and fixing on wall face unplasticised - PVC moulded fittings/ accessories for unplasticised Rigid PVC rain water pipes conforming to IS : 13592 Type A, including jointing with seal ring conforming to IS :5382, leaving 10 mm gap for thermal expansion. Bend 87.5° 110 mm bend (CCL SOR 2025 12.42.5.2) |
| 140 | Providing and fixing unplasticised -PVC pipe clips of approved design to unplasticised - PVC rain water pipes by means of 50x50x50 mm hard wood plugs, screwed with M.S. screws of required length, including cutting brick work and fixing in cement mortar 1:4 (1 cement : 4 coarse sand) and making good the wall etc. complete. 75 mm(CCL SOR 2025 12.43.1) |
| 141 | Providing and fixing unplasticised -PVC pipe clips of approved design to unplasticised - PVC rain water pipes by means of 50x50x50 mm hard wood plugs, screwed with M.S. screws of required length, including cutting brick work and fixing in cement mortar 1:4 (1 cement : 4 coarse sand) and making good the wall etc. complete. 110 mm (CCL SOR 2025 12.43.2) |
| 142 | Deployment 01 (one) Plumber(Skilled mapower) and 01 (one) Plumber helper (unskilled mapower) for day to day maintenance works related with plumbing works in General shift as per instruction of Engineer-in-charge. (CCL SOR 2025 Sub Volume - V: New Item-28 ) |
| 143 | Supply of two way bib cock with wall flange (jaquar or equivalent) complete as per instruction of EIC. (CCL SOR 2025 Sub Volume - V: New Item- 48) |
| 144 | Supply of C.P. brass Waste Coupling for wash basin and sink (Jaquar or its equivalent) of approved quality and colour,Waste coupling 32 mm dia of 130 mm length all complete as per instruction of EIC. (CCL SOR 2025 Sub Volume - V: New Item- 38) |
| 145 | Providing and fixing auto closing pillar tap of Jaguar make having model no:PRS-031L65 or equivalent of any other brand as per instruction of EIC.(Analysed Rate) |
| 146 | Providing and fixing 600x120x5 mm glass shelf with edges round off, supported on anodised aluminium angle frame with C.P. brass brackets and guard rail complete fixed with 40 mm long screws, rawl plugs etc., complete. (CCL SOR 2025 17.33) |
| 147 | Providing and fixing toilet paper holder : C.P. brass (CCL SOR 2025 17.34.1) |
| 148 | Providing and fixing 600x450 mm beveled edge mirror of superior glass (of approved quality) complete with 6 mm thick hard board ground fixed to wooden cleats with C.P. brass screws and washers complete. (CCL SOR 2025 17.31) |
| 149 | Providing and fixing Stainless Steel A ISI 304 (18/8) kitchen sink as per IS:13983 with C.I. brackets and stainless steel plug 40 mm, including painting of fittings and brackets, cutting and making good the walls wherever required : 610x460 mm bowl depth 200 mm(CCL SOR 2025 17.10.2.2) |
| 150 | Providing and placing on terrace (at all floor levels) polyethylene water storage tank, IS : 12701 marked, with cover and suitable locking arrangement and making necessary holes for inlet, outlet and overflow pipes but without fittings and the base support for tank. (CCL SOR 2025 18.48) |
| 151 | Providing and fixing white vitreous china pedestal for wash basin completely recessed at the back for the reception of pipes and fittings. (CCL SOR 2025 17.8) |
| 152 | Providing and fixing white vitreous china pedestal type water closet (European type W.C. pan) with seat and lid, 10 litre low level white P.V.C. flushing cistern, including flush pipe, with manually controlled device (handle lever), conforming to IS : 7231, with all fittings and fixtures complete, including cutting and making good the walls and floors wherever required : W.C. pan with ISI marked white solid plastic seat and lid (CCL SOR 2025 17.2.1) |
| 153 | Providing and fixing white vitreous china flat back half stall urinal of size 580x380x350 mm with white PVC automatic flushing cistern, with fittings, standard size C.P. brass flush pipe, spreaders with unions and clamps (all in C.P. brass) with waste fitting as per IS : 2556, C.I. trap with outlet grating and other couplings in C.P. brass, including painting of fittings and cutting and making good the walls and floors wherever required : Single half stall urinal with 5 litre P.V.C. automatic flushing cistern (CCL SOR 2025 17.5.1) |
| 154 | Supplying Hand Shower (Health Faucet) with 8mm Dia 1.2 Meter Long Flexible Chrome Tube and Wall Hook (Jaquar or its equivalent) as per direction of EIC. (CCL SOR 2025 Sub Volume - V: New Item- 31) |
| 155 | Lifting of submersible pump-motor set from deep bore well with rigid PVC pipe of 50 mm dia including all accessories etc. complete including stacking all materials as per instruction of Engineer-in-charge. (CCL SOR 2025 Sub Volume - V: New Item- 105) |
| 156 | Lowering and commissioning of 7.50 / 10.00 HP submersible pump-motor set in deep bore well with rigid PVC pipe of 50 mm dia with all accessories etc. complete including cost of labour, tools & plant & machineries but excluding the cost of pump, motor, cable, rigid PVC pipe, control panel etc. which will be paid separately.(Analysed Rate) (CCL SOR 2025 Sub Volume - V: New Item- 106) |
| 157 | Providing of Rigid PVC pipe 50mm outer dia conforming to IS:4985 specification(6kgf/sqcm) (CCL SOR 2025 Sub Volume - V: New Item- 108) |
| 158 | Providing of Nylone rope 12mm dia (CCL SOR 2025 Sub Volume - V: New Item- 107) |
| 159 | Providing of 50 mm dia CI Adopter as per instruction of Engineer-in-charge.(Analysed Rate) |
| 160 | Flusing of bore hole by drilling machine.(Analysed Rate) |
| 161 | Trimming of tree branches coming out of main trunk having girth below 30 cm measured at knot of a main trunk.The avarage height of tree is 3.00 mtr and above. It also includes stacking of serviceable materials and disposal of unserviceable materials upt the lead of 300 mtrs as per direction of EIC. ( based on actual observation at site) (CCL SOR 2025 Sub Volume - V: New Item- 12) |
| 162 | Trimming of tree branches coming out of main trunk having girth 30 cm to 60 cm measured at knot of a main trunk.The avarage height of tree is 3.00 mtr and above. It also includes stacking of serviceable materials and disposal of unserviceable materials upt the lead of 300 mtrs as per direction of EIC.( based on actual observation at site) (CCL SOR 2025 Sub Volume - V: New Item- 13) |
| 163 | Trimming of tree branches coming out of main trunk having girth 60 cm to 90 cm measured at knot of a main trunk.The avarage height of tree is 3.00 mtr and above. It also includes stacking of serviceable materials and disposal of unserviceable materials upt the lead of 300 mtrs as per direction of EIC.( based on actual observation at site) (CCL SOR 2025 Sub Volume - V: New Item- 14) |
| 164 | Trimming of tree branches coming out of main trunk having girth above 90 cm measured at knot of a main trunk.The avarage height of tree is 3.00 mtr and above. It also includes stacking of serviceable materials and disposal of unserviceable materials upt the lead of 300 mtrs as per direction of EIC.( based on actual observation at site) (CCL SOR 2025 Sub Volume - V: New Item- 15) |
| 165 | Providing 20 mm UPVC Ball Valve (supreme,astral or equivalent). SCH 80 as per ASTM D-2467 as per direction of EIC. (CCL SOR 2025 Sub Volume - V: New Item-55) |
| 166 | Providing 25 mm UPVC Valve (supreme,astral or equivalent). SCH 80 as per ASTM D-2467 as per direction of EIC. (CCL SOR 2025 Sub Volume - V: New Item-59) |
| 167 | Providing 50 mm UPVC Ball Valve (supreme,astral or equivalent). SCH 80 as per ASTM D-2467 as per direction of EIC. (CCL SOR 2025 Sub Volume - V: New Item- 57) |
| 168 | Providing 76.2 mm UPVC Valve (supreme,astral or equivalent). SCH 80 as per ASTM D-2467 as per direction of EIC. (CCL SOR 2025 Sub Volume - V: New Item- 58) |
| 169 | Providing Upvc union 25 mm (supreme,astral or equivalent). SCH 80 as per ASTM D-2467 asper direction of EIC. (CCL SOR 2025 Sub Volume - V: New Item- 60) |
| 170 | Providing Upvc union 40 mm (supreme,astral or equivalent). SCH 80 as per ASTM D-2467 as per direction of EIC. (CCL SOR 2025 Sub Volume - V: New Item- 61) |
| 171 | Providing Upvc union 50 mm (supreme,astral or equivalent). SCH 80 as per ASTM D-2467 as per direction of EIC. (CCL SOR 2025 Sub Volume - V: New Item- 62) |
| 172 | Providing Upvc union 75 mm (supreme,astral or equivalent). SCH 80 as per ASTM D-2467 as per direction of EIC. (CCL SOR 2025 Sub Volume - V: New Item- 63) |
| 173 | Providing Upvc union 100 mm (supreme,astral or equivalent). SCH 80 as per ASTM D-2467 as per direction of EIC. (CCL SOR 2025 Sub Volume - V: New Item- 64) |
| 174 | Supply Sink Cock with Regular Swinging Spout (Wall Mounted Model) With Wall Flange all complete as per instruction of EIC. (CCL SOR 2025 Sub Volume - V: New Item-44) |
| 175 | Supply of 15mm size C.P.Brass pillar cock (Jaquar or its equivalent) all complete as per instruction of EIC. (CCL SOR 2025 Sub Volume - V: New Item- 39) |
| 176 | Supply of Soft Close WC Seat Cover Colour: White of approved brand as per instrection of EIC. (CCL SOR 2025 Sub Volume - V: New Item- 47) |
| 177 | Supply of Stainless steel Towel rail (Jaquar or its equivalent) all complete as per direction of EIC. (CCL SOR 2025 Sub Volume - V: New Item- 36) |
| 178 | Supply of Glass shelf 550 mm long (Jaquar or equivalent) all complete as per instrection of EIC. (CCL SOR 2025 Sub Volume - V: New Item- 45) |
| 179 | Supply of Corner Glass Shelf with Bracket(Jaquar or equivalent) all complete as per instrection of EIC. (CCL SOR 2025 Sub Volume - V: New Item- 46) |
| 180 | Providing unplsticized Polyvinyl Chloride (uPVC) pipes : (External work): 80 mm dia SCH 80 as per ASTM-D1785 as per direction of EIC. (supreme,astral or equivalent.) (CCL SOR 2025 Sub Volume - V: New Item-51) |
| 181 | Providing unplsticized Polyvinyl Chloride (uPVC) pipes : (External work): 50 mm dia SCH 80 as per ASTM-D1785 as per direction of EIC. (supreme,astral or equivalent.) (CCL SOR 2025 Sub Volume - V: New Item- 52) |
| 182 | Providing unplsticized Polyvinyl Chloride (uPVC) pipes : (External work): 40 mm dia SCH 80 as per ASTM-D1785 as per direction of EIC. (supreme,astral or equivalent.) (CCL SOR 2025 Sub Volume - V: New Item-53) |
| 183 | Providing unplsticized Polyvinyl Chloride (uPVC) pipes : (External work): 25 mm dia SCH 80 as per ASTM-D1785 as per direction of EIC. (supreme,astral or equivalent.) (CCL SOR 2025 Sub Volume - V: New Item- 54) |
| 184 | Providing Upvc socket 25 mm (supreme,astral or equivalent). SCH 80 as per ASTM D-2467 as per direction of EIC. (CCL SOR 2025 Sub Volume - V: New Item- 65) |
| 185 | Providing Upvc socket 40 mm (supreme,astral or equivalent). SCH 80 as per ASTM D-2467 as per direction of EIC. (CCL SOR 2025 Sub Volume - V: New Item- 66) |
| 186 | Providing Upvc socket 50 mm (supreme,astral or equivalent). SCH 80 as per ASTM D-2467 as per direction of EIC. (CCL SOR 2025 Sub Volume - V: New Item- 67) |
| 187 | Providing Upvc socket 75 mm (supreme,astral or equivalent). SCH 80 as per ASTM D-2467 as per direction of EIC. (CCL SOR 2025 Sub Volume - V: New Item- 68) |
| 188 | Providing Upvc MTA brass inserts 25 mm (supreme,astral or equivalent). SCH 80 as per ASTM D-2467 as per direction of EIC.V 75) |
| 189 | Providing Upvc MTA brass inserts 40 mm (supreme,astral or equivalent). SCH 80 as per ASTM D-2467 as per direction of EIC.V 76) |
| 190 | Providing Upvc FTA brass inserts 25 mm (supreme,astral or equivalent). SCH 80 as per ASTM D-2467 as per direction of EIC. (CCL SOR 2025 Sub Volume - V: New Item- 77) |
| 191 | Providing Upvc FTA brass inserts 40 mm (supreme,astral or equivalent). SCH 80 as per ASTM D-2467 as per direction of EIC. (CCL SOR 2025 Sub Volume - V: New Item- 78) |
| 192 | Providing Upvc FTA brass inserts 50 mm (supreme,astral or equivalent). SCH 80 as per ASTM D-2467 as per direction of EIC. (CCL SOR 2025 Sub Volume - V: New Item- 79) |
| 193 | Providing Upvc FTA brass inserts 80 mm (supreme,astral or equivalent). SCH 80 as per ASTM D-2467 as per direction of EIC. (CCL SOR 2025 Sub Volume - V: New Item- 80) |
| 194 | Providing Upvc MTA 25 mm (supreme,astral or equivalent). SCH 80 as per ASTM D-2467 as per direction of EIC. (CCL SOR 2025 Sub Volume - V: New Item- 81) |
| 195 | Providing Upvc MTA 40 mm (supreme,astral or equivalent). SCH 80 as per ASTM D-2467 as per direction of EIC. (CCL SOR 2025 Sub Volume - V: New Item- 82) |
| 196 | Providing Upvc MTA 50 mm (supreme,astral or equivalent). SCH 80 as per ASTM D-2467 as per direction of EIC. (CCL SOR 2025 Sub Volume - V: New Item- 83) |
| 197 | Providing Upvc MTA 80 mm (supreme,astral or equivalent). SCH 80 as per ASTM D-2467 as per direction of EIC. (CCL SOR 2025 Sub Volume - V: New Item- 84) |
| 198 | Providing Upvc FTA 25 mm (supreme,astral or equivalent). SCH 80 as per ASTM D-2467 as per direction of EIC. (CCL SOR 2025 Sub Volume - V: New Item- 86) |
| 199 | Providing Upvc FTA 40 mm (supreme,astral or equivalent). SCH 80 as per ASTM D-2467 as per direction of EIC. (CCL SOR 2025 Sub Volume - V: New Item- 87) |
| 200 | Providing Upvc FTA 50 mm (supreme,astral or equivalent). SCH 80 as per ASTM D-2467 as per direction of EIC. (CCL SOR 2025 Sub Volume - V: New Item- 88) |
| 201 | Providing Upvc FTA 80 mm (supreme,astral or equivalent). SCH 80 as per ASTM D-2467 as per direction of EIC. (CCL SOR 2025 Sub Volume - V: New Item- 89) |
| 202 | Providing Upvc solvent for fixing supplied pipe fittings as per direction of EIC. (CCL SOR 2025 Sub Volume - V: New Item- 91) |
| 203 | Providing thread Sealant Teflon Tapes non adhesive of size 0.5 inch as per direction of EIC. (CCL SOR 2025 Sub Volume - V: New Item- 92) |
| 204 | Total impact of GST for the purpose of CTC Please Enable Macros to View BoQ information |
| SR No | FileName | File Description |
| 1 | Click here to download tender document | Tender Documents |
| 2 | Click here to download tender document | Tender Documents |
| 3 | Click here to download tender document | Tender Documents |
We are a group of professionals specializing in custom software development, web development, mobile app development, IOT base solutions, web design, graphics & Enterprise solutions provid.
Copyright © 2026 · All Rights Reserved. Terms of Usage | Privacy Policy
For Tender Information Services Visit : TenderDetail
