|
| 1 | Demolition of un-reinforced Cement Concrete of any description and in any position not otherwise specifically provided for. |
| 2 | M & L for 100 MM thick plain cement concrete 1:4:8 type D2 (using 40mm graded stone aggregate) in sub base |
| 3 | M&L for cement concrete work in pavement hard standing of flexural strength 40kg/sqcm in field using 400 kg of cement per cubic metre thickness of concrete 25 cm. |
| 4 | M&Lfor forming 12mm thick expansion joints filled with pre-formed bituminious filler and top 30mm primed and selaed with sealing compound grade 'A' for 250mm thick of slab. |
| 5 | M&L forming contraction (dummy)joints 65mm deep X 10mm wide, filled with sealing compound |
| 6 | M&L for finishing surface of concrete roads, pavement but by brooming |
| 7 | M&L for formwork to sides of concrete foundations, footing, bases of columns,raft and raft beam, sides and soffits (if any) of foundations and plinth beam; and similar work; vertical or to batter. |
| 8 | M&L for rounding edges of concrete not exc. 10mm radius with an edging tool |
| 9 | M&L for removing demolished un-reinforced concrete to a distance of 100m or under beyond the leads including loading unloading and stacking at the destinations etc complete all as specified and directed. |
| 10 | M &L for 25 mm thick PCC 1:2:4 type BO (Using 12.5 mm graded stone aggregate) as in sub base in floors complete all as specified and directed by Engr-in-charge |
| 11 | M&L screed bed or bedding layer of morter 15 mm thick cement plaster 1:6 for laying floor finished to receive floor tiles/granite. |
| 12 | M & L for Virified Ceramic tiles Light shed 10 mm thick (square/ rectangular) polished, area of each tiles exceeding 0.36 sqm but not exceeding 0.42 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match |
| 13 | Demolition of brickwork or stone/boulder masonry, built in cement mortar including all quoins, arches, pillars, etc, but excluding ashlar facings, dressed stonework and precast concrete articles complete all as specified and directed. |
| 14 | Pre - cast cement concrete 1:3:6 type C-1, (20mm graded stone aggregate) block masonary with solid blocks built in cement mortar 1:6 complete all as specified and as directed |
| 15 | M & L for 75MM thick plain cement concrete 1:4:8 type D2 (using 40mm graded stone aggregate) in sub base under chequered tiles |
| 16 | M&L for chequered cement concrete tiles 20 cm by 20 cm by 25 mm thick including screed bed 20mm thick in (CM 1:6) , with grey cement and pigments, set, jointed and pointed in neat cement slurry in floors. |
| 17 | M&L PCC (1:3:6) type C-2 using 40mm graded stone agg 75mm thick as in plinth protection finished even and fair without using extra cement. |
| 18 | Dismantling plain or corrugated steel sheeting any gauge, thickness, including Naintal or similar pattern roof coverings |
| 19 | S&F of Pre- painted galvatume aluminum zinc coating GI based corrugated steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws as specified |
| 20 | S&F of Pre- painted galvatume aluminum zinc coating GI based plain sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws as specified |
| 21 | Hacking out old broken glass (any thickness, size quality or description) from wooden frames or stone, concrete or brick surrounds glazed with putty or fixed with beads complete all as specified & directed. |
| 22 | M&L for 6.3 mm thick sheet glass ordinary quality and glazing with oil putty in square n-exc 0.5 sqm in each pane complete all as specified & directed. |
| 23 | Dismantling wall and ceiling boards (fibre, pulp, insulation etc.) any thickness, including cover fillets. |
| 24 | M & L 6 mm thick Ply wood, grade BWR, type BB fixed with screws to timber frame work in ceiling etc complete all as specified and as directed. |
| 25 | M&L for 9mm thick Veneered decorative plywood, grade 1 (with BWR resin) with decorative face veneers on only one face has decorative veneer fixed to timber frame work, complete, all as specified and as directed. |
| 26 | Dismantling Unframed timber scantlings 40 Sq. cm and over in section and in any position complete all as specified. |
| 27 | M&L 2nd class hard wood in scantling timber framed work fixed clean sawn directed complete all as specified and directed by Engr-in-charge. |
| 28 | Dismantling Unframed timber scantlings under 40 Sq. cm in section and in any position complete all as specified. |
| 29 | S & F Second class hard wood plain fillets, wrought, square, rectangular or triangular in section, secured with screws, cross sectional area exceeding 3 and not exceeding 6 Sq. cm |
| 30 | S & F Second class hard wood ditto as item no 21 but bulinosed splayed chamfered or rounded on one side or face in section secured with screw cross sectonal area n.exc 3 sqcm |
| 31 | M & L for preparation of old plaster surfaces of any description, not otherwise described applying one coat of cement base paint (first quality) complete all as specified and directed. |
| 32 | Taking down Chowkats or frames not exceeding 1.5 Sq. M each (Without taking off shutters from the frames) complete all as specified |
| 33 | S and F Steel windows for industrial buildings, fixed type, with glazing bars complete all as specified |
| 34 | Taking down chowkat or frames exc 1.5 sqm but n. exc 4 sqm each (w/o taking of shutters from the frame ) complete all as specified |
| 35 | S & F Second class hard wood plain, solid, straight chowkats and frames, wrought, framed, rebated on the solid, rounded or chamfered, put together with glue pinned at joints. complete all as specified |
| 36 | S & F 35 mm thick second class hard wood, plain framed , panelled shutters (any number of panels), with panels of timber flat on both sides (feather edged), or of veneered particle board medium density, wood particle board with commercial face veneers supplied and fixed to chowkhats. complete all as specified |
| 37 | S& F 35 MM glazed and skeleton shutter open rebated and prepare to receive glass ,gauze etc ( without sash bar ) edges of framing plain chamfered or rounded fitted with cut and mitred beads for securing glass etc size of member of shutter as specifies in SSR PART-I,section 8 clause 8.24 (a) supplied and fitted to chowkhat |
| 38 | Preparation of New or previously untreated wood and wood based surfaces of any description, not otherwise described, over 10 cm width or girth and applying two coats of Synthetic enamel paint (Ordinary tint) over a coat of Pink primer. complete all as specified |
| 39 | S and F Mild steel barrel tower bolts, 150 mm long stove enamelled black, with bright bolt and fixed complete all as specified |
| 40 | S & F in repairs of floor door stopper of aluminium alloy body and tongue, anodised, with hard drawn steel spring, fixed in floor with overall length of vover plate 140 mm complete all as specified |
| 41 | S and F 300mm long Mild steel sliding door bolts, plate type, stove enamelled black, with bright bolt not less than 12mm dia with and including a minimum of 6 bolts and nuts, four on bolt plate and fixed complete all as specified |
| 42 | S and F 125 mm long MS Butt hinges medium weight, cold rolled mild steel, and fixed complete all as specified |
| 43 | S & F 125 mm long Extruded Aluminium alloy handles, fabricated type, anodised in repairs complete all as specified |
| 44 | S and F in repair 300mm, ordinary rat tail rod pattern springs including roller and roller plate complete |
| 45 | Taking down cement plaster on brick or stone walls, etc. including raking out joints, hacking for key, scrubbing down with water, etc complete all as specified and directed. |
| 46 | M & L for rendering 15mm thick in cement plaster 1:4 on stone masonry surfaces or surface other than fair face of brickwork or on one side of lathing finishing even and smooth without using extra cement complete all as specified and directed. |
| 47 | M & L for preparation of new plastered surface of wall and applying two coats of cement base paint over a coat of alkali resistant priming paint complete all as specified and directed. |
| 48 | S and F harrison rail ,mild steel ,chromium plated with fixing bracket ,stops rollers etc complete all as specified and directed. |
| 49 | taking down copper/aluminium point wiring (light, fan, socket or power) complete, including fixture and fittings such as switches, ceiling roses, , pendents, regulators sockets, light fittings , holder, bell push, ding dong etc. removing materials to store for keeping in safe custody or for taking credit ( credit for above items should be made as per conditions separately ) and making good disturbed suefaces of walls, floor etc. |
| 50 | M&L for point wiring using approved colour coding as per IS with using 1.5 Sqmm multistranded,1100 volt grade copper conductor cable of PVC insulated and unsheathed type alongwith 1.5 Sqmm PVC insulated FRLSH stranded copper conductor cable for continuous earthing in & incl PVC casing & capping with accessories having ISI mark fixed on wall surfaces / ceiling including provision of 2 mm thick sheet metal terminal box with 3 mm thick hylam laminated sheet on top for fixing switches sockets etc. all as specified for one light point/ fan Bell point controlled by one switch complete all as specified and directed by Engineer-in-Charge. |
| 51 | All as per Srl item No 50 here-in-before but controlled with one 3 pin socket outlet 5 Amp, independent board with other switches with cable 1.5 Sqmm complete all as per specified and directed by Engineer-in-Charge. |
| 52 | All as per srl item no 50 here-in-before but controlled with one 3 pin socket 5 Amp on the same board with other switches with cables 1.5 Sqmm complete all as specified and directed by Engineer-in-Charge. |
| 53 | All as per srl item no 50 here-in-before but controlled with one 3 pin socket 15 Amp on the independent board with other switches with cables 2.5 Sqmm complete all as specified and directed by Engineer-in-Charge. |
| 54 | Supply and fixing of socket outlet 5 Amp, 230 Volt, flush button single pole one way complete all as specified and directed by Engineer -in-Charge, |
| 55 | Supply and fixing of switch piano type 5 Amp, 230 Volt, flush button single pole one way complete all as specified and directed by Engineer -in-Charge, Make :ANCHOR or equivalent. |
| 56 | Supply and fixing switch piano type 15 Amp, 230 Volts flush button single pole one way complete all as specified and directed by Engineer-in-Charge. |
| 57 | Supply and fixing socket outlet 3 pin 15 Amp, 2-in one , 230 volts flush type230 Volts flush type complete all as specified and directed by Engineer-in-Charge. |
| 58 | M&L Ceiling rose, 3 terminal with ISI mark all as specified and directed by Engr-In-Charge. Make :ANCHOR or equivalent. |
| 59 | S/F in replacement LED integrated batten tube light fittings 20W 4 Feet long complete with twin core twisted flexible copper conductor cable complete all as specfied and directed. |
| 60 | Supply and fixing LED Lamp 12 Watt in lamp (bulb) holder complete all as specified and directed. |
| 61 | Supply and fix Bajaj LED Bulk head light fittings, 10 W cool white, color temperature 3500-4100K wall mounting type complete all as specifed and directed of equavalent make : CG/Philips/wipro etc. |
| 62 | Supply and fixing in replacement of sheet metal enclosure double door for DBs single pole and neutral for 12 way 240 volt complete all as specified and direct by Engineer-in-Charge . |
| 63 | Supply and fixing in replacement of isolator SPN 40 AMP rating 240V, 10KA 'C' curve in the DB complete with connection testing and commissioning all ass directed by Engineer in Charge. |
| 64 | Supply and fixing in replacement of 240V, 10 KA 'B' curve miniature circuit breaker (MCB) of single poles and current carrying capacity 6 to 32 AMP, in the MCB DB Complete with connection testing and commissioning. |
| 65 | M & L in replacement for earthing complete with galvanised steel earth plate electrode 600x600x6.0 mm thicj\k buried directly in ground ( earth pit not less than 2.25 metres deep below ground level) with top edge of the plate not less than 1.5 metres below normal ground level, connected to galvanised iron wire of 4.0 mm dia as earth continuty conductor by means of bolts, nuts check nuts and washers of galvanised iron or steel all as shown in electrical plate No 3 of SSR-I 2010, connected to main switch board all as specified and including testing on completion , necessary excation, earthwork, PCC works ans CI earth pit cover with watering pipe 20 mm dia GI pipe medium grade , funeels with wire mesh and lugs GI pipe of 15 mm dia of light grade for protection of earth wire upto 7.5 mtrs complete all as specified and directed by Engineer-in-Charge. Note:- On testing after completion if the desired resistance is not obtained the earthing shall be re- done aat no extra cost. |
| 66 | Supply and fixing air termination single pointed aluminium rod 12 mm 300 mm long include fixing on aluminium flat saddle on roof/wall with ms clamp/ nut bolt washer complete all as specified and directed. |
| 67 | M&L for Aluminium strip 25 x 3mm with saddles and fixing screws etc for roof conductor and down conductors above ground for fitting the strips. |
| 68 | M & L for earthing complete with galvanised steel earth plate electrode 600 x 600 x 6.0 mm thick burried directly in gorund (earth pit not less than 2.25 Mtr normal ground level),and top edge of earth plate not less than 1.5 mtr below normal ground level, connected to galvanised earth strip 32 x 6 mm means of bolts, nuts & check nuts, and washers of galvanised iron protection pipe light grade of 40 mm dia and watering pipe medium grade of 20 mm dia and filled with alternate layer of charcoal and common salt, watering funnel with wire mesh, earth pit chamber and cover CI frame PCC 1:3:6 type C-2 all as shown in electrical plate No-3 of SSR part-I of 2009 connected to earthing test point all as specified and indicated including all earth work excavation, returning filling and disposal of surplus soil and testing on completion. |
| 69 | Supply and fixing in replacement of 1100 Volts grade heavy duty cable PVC insulated aluminium stranded conductor served with inner sheathing of PVC tape and overall PVC sheathed in service connection suspended by insulating hangers not more than 1 meter apart including 4mm suspension wire one twin core cable flat or circular of size 10 Sqmm complete |
| 70 | Supply and fixing test point terminal block made of gun metal or phosphorus bronze size drilled and screwed including75x75x25mm 3 nos. 8mm dia 25mm long hex. head screw complete all as specified and directed. |
| 71 | Schedule of Credit Please Enable Macros to View BoQ information |
