|
| 1 | Demolition of cement concrete (unreinforced ) in floors and pavings n. exc 15cm thickness (above or below GL) complete all as specified and directed. |
| 2 | Dismantling floor, hearth or wall tiles, including cement mortar, removing serviceable tiles from site & rubbish off the premises, complete all as specified and directed. |
| 3 | Taking down cement or cement lime plaster or stone / brick wall, ceiling including racking out joints, hacking for key, scrubbing down with water etc, complete all as specified and directed. |
| 4 | Raking out cement or cement lime mortar joints/ pointing to random rubble or polygonal rubble uncoursed or brought up to courses, complete all as specified and directed. |
| 5 | Taking down chowkhat or frames with shutter (without taking off shutter from the frame ) area n. exc 1.5 Sqm each complete with hold fasts etc complete all as specified and directed. |
| 6 | Taking down chowkhats or frames with shutters (without taking off shutters from the frames) exc 1.50 sqm and n.exc 4.00 Sqm each and removing from site complete and making good disturbed surfaces of wall in CM (1:3) all as specified and directed. |
| 7 | Demolition of brick work or stone masonary built in cement mortar etc complete all as specified and directed. |
| 8 | M & L for brick work with flyash bricks, straight or curved on plan exc 6M mean radius built in cement mortar 1:6 complete all as specified and directed. |
| 9 | M & L for fly ash Brick work old size , straight or curved on plan to any radius in half brick thick walls built in CM 1:4 all as specified and directed.. |
| 10 | M & L for walling random rubble masonary uncoursed well bonded bedded and solidly hearted and built in cement mortar 1:6 etc complete all as specified and directed. |
| 11 | M & L for walling random rubble masonary uncoursed well bonded bedded and solidly hearted and built in cement mortar 1:6 (but except Stone) etc complete all as specified and directed. |
| 12 | Extra over stone walling for hammer dressing to face stones and dressing of face beds and joints, hammer dressing with maximum depression on face from straight edge held against the dressed surface n. exc 20mm complete all as specified and directed. |
| 13 | M & L for Ready Mix Plaster in cement mortar (1:6), 15mm thick on other than fair faces of brick work / stone masonary surfaces finished even and smooth without using extra cement, complete all as specified and directed. |
| 14 | M & L for rendering in cement mortar (1:4) 10mm thick as in ceiling surfaces finished fair and even complete all as specified & directed. |
| 15 | M & L for preparation of new plastered surfaces of ceiling and applying three coats of white wash complete all as specified and directed |
| 16 | M & L for preparation of old plastered surfaces of ceiling and applying two coats of white wash complete all as specified and directed |
| 17 | M & L for preparation of newly plastered surface of wall and applying two coats of Distempering with 1st quality acrylic emulsion distemper (ready mixed Plastic paint) having VOC content less than 50 gms/litre, of approved manufacturer, of required shade and colour over 1mm wall care putty and one coat of alkali resistant priming paint, complete all as specified and directed. |
| 18 | M & L 15mm thick Ready Mix Plaster in cement mortar (1:4) mixed with water proofing compound, on other than fair faces of brick / stone masonary surfaces, finished even and smooth without using extra cement, complete all as specified and directed . |
| 19 | M & L for rough cast plaster mix with crusted stone (6-10mm), sand and cement in the ratio 1: 1.5: 1, over 15mm thick ready mix plaster rendering in CM 1:4 on stone / brick masonary wall surfaces complete all as specified and directed. |
| 20 | M & L for preparation of new plastered surfaces of wall and applying Two coats of 100% Premium acrylic emulsion paint having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance, dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives @ 1.43 litre/ 10 sqm, over and over one coat of exterior primer applied @ 0.90 litre/ 10 sqm over plastering surfaces, complete all as specified and as directed.MAKE :- ASIAN/APEX/BERGER (Weather coat all guard) |
| 21 | M & L 25mm thick PCC (1:2:4) type B-0 using 12.5mm graded stone aggregate as in floors complete all as specified and directed. |
| 22 | M & L non skid (Matt finish) ceramic coloured tiles 7 to 8mm thick area of each tile exceeding 0.18 Sqm but not exc 0.36 Sqm, in floors etc, set and jointed in neat cement slurry and pointed in white or coloured cement to match over and including 15mm thick screed bedding in cement mortar 1:6 complete all as specified and directed. |
| 23 | M & L for glazed ceramic coloured tiles 7 to 8mm thick in vertcial surfaces of size 600x1200mm set and jointed in approved adhesive with neat cement slurry and pointed in white or colour cement to match over and including 10mm thick screed plaster in cement mortar 1:4 complete all as specified and directed. |
| 24 | M & L for vitrified ceramic tiles light shade10mm thick (square / rectangular ) polished, area of each tiles exc 0.42 Sqm but not exceeding 1.00 Sqm, in floor etc set and joint free white or coloured match to tile, including screed bed 15mm thick in CM 1:6 complete all as specified and directed. |
| 25 | M & L for vitrified ceramic tiles light shade 10mm thick (square / rectangular ) polished, area of each tiles exc 0.42 Sqm not exceeding 1.00 sqm, in vertical surfaces such as skirting, dados etc set and jointed in approved adhesive neat cement slurry and pointed in white or coloured cement to match including screed plaster 10mm thick in CM 1:4 complete all as specified and directed. |
| 26 | Dismantling loose /disintegrated portion of RCC Chajjas, bend shelves, beams balconies and similar work at any position or any height and dobbing out with PCC 1:1:5:3, 15mm to 50mm thick using 6 to 12mm graded stone aggregate to make up and finished required shape including applying anti corrosive paint on exposed surfaces of reinforcement and provision of necessary supporting form work and including 10mm thick plastering in CM 1:4, finished fair and even, complete all as specified and directed. |
| 27 | S & F for Second class HW, plain, solid, straight chowkhats & frames, wrought, framed, rebated on the solid, rounded or chamfered, put together glue pinned at joints complete all as specified and directed. |
| 28 | S & F Flush shutters 30mm thick, solid core construction, with block board core and plywood face panels commercial type on both side and both facesis covered with approved pattern with Decorative coloured laminate type 1 of 0.9 mm thick and all around side faces covered with 10mm thick 1st class hard wood liping duly polished complete all as specified and directed. |
| 29 | S & F for I st class HW, 35mm thick, glazed and skeleton shutters, open rebated and prepared to receive glass, gauze, etc divided into squares, with plain, chamfered or rounded, mitred and rebated sash bars, fitted with cut and mitred beads for securing glass etc, sizes of members shutters as specified in SSR Part I, selection 8, clause 8.24 (a), supplied and fitted to chowkhats complete all as specified and directed. |
| 30 | S & F for 200mm long Brass barrel tower bolts, with cast or sheet barrel and rolled or cast bolts and fixed complete all as specified and directed. |
| 31 | S & F for 200 mm Brass, sliding door bolt with sand or die-cast brass hasp, staple (bolt type) and fixing bolt with rolled or drawn brass bolts and fixed complete all as specified and directed. |
| 32 | S & F for 300mm ordinary Mild steel rat tail rod pattern springs including roller and roller plate complete all as specified and directed. |
| 33 | S & F in repairs over all length of cover plate 150 mm long dual leg door stopper of Brass body fixing on door, complete all as specified and directed. |
| 34 | S & F for continous (Piano) hinges,brass, bright finish, width of flaps (when open) 30mm complete all as specified and directed. |
| 35 | S & F in repairs 18/19mm thick MDF board and two face decorative laminate type, including teak wood lipping 19 x 6mm thick fixed with nails in shelves, partition and palmet boxes, shelves, almirah book cases, toilet boxes, racks, cup board shutter and similar works complete all as specified and directed. |
| 36 | S & F in repair 125mm oval shape fancy brass handle, polished bright complete all as specified and directed. |
| 37 | S & F Door Magnet Cather for Cabinet Drawer Cupboard Wardrobe Kitchen Bathroom Office Door Closer Magnet complete all as specified and directed. |
| 38 | Supply and fixing Anodised aluminium window(three /two track) and ventilator shutters including frame,fixed type without sash bar, aluminium section weighing 0.55 kg/m including necessary joining cleats, glazing clips, rubber packing, anodised aluminium snap beading, screws, sheet glass 3.0 mm thick etc. complete all as specified all complete as specified and directed. |
| 39 | M & L providing 50x50mm aluminium anodised grills mesh for fixing in Aluminium windows weight not less than 1.2Kg/ Sqm complete all as specified and directed. |
| 40 | S & F for fixed type ventilators aluminium powder coated of frame size 50.80x25.40mm, 1.5mm thick half portion will be fixed with 4mm thick frusted glass and half portion will be fixed with louvers with 4mm thick frusted glass with rubber gasket and aluminium beading, aluminium grill with fixing arrangement (weight of grill not less than 2.50Kg/sqm) aluminium wire mesh 0.45mm dia to be fixed over louvers portion only including necessary cutting holes on wall and fixing arrangements complete all as specified and directed & sample kept in GE office. (AL section thickness 1.50mm) |
| 41 | S & F for stainless steel wire cloth, 0.36mm nominal dia of wire and average width of apertature 1.40mm and fixed with tinned tacks or stainless steel wire staples complete all as specified and directed. |
| 42 | S & F for in repairs 25mm dia SS curtain rod and decorative type knobs and curtain rod bracket with chromium plated U shaped support clamp suitable for 25mm dia rod complete all as specified and directed. |
| 43 | S & F for Solid PVC moulded Door Frame of size 50mm x 47mm made out of 5mm plain colour PVC sheet reinforced with M.S. Square tube, suppling & fixing in opening as per specification & drawing using single side prelam PVC sheet used instead of Plain colour PVC sheet & edges will be painted to match with prelam sheet, reinforced with MS square tube and fixing in opening as specification & drawing complete all as specified and directed. |
| 44 | S & F for factory made solid PVC moulded door shutter with wood free EPS, 28 to 30mm thick, (styles) with 2,4 or 6 raised panel design with 2mm thick moulded prelam (Nut Brown colour ) PVC sheet on the front face & 2mm prelam (Nut Brown colur ) PVC sheet on back face, and fixing inthe frame at site as per specification and drawing on page 161 of SSR (Part -II ) 2020 complete all as specified and directed. |
| 45 | S & F for 150mm long aluminium anodised barrel tower bolts of extruded section all as specified and directed. |
| 46 | S & F for 150mm long extruded aluminium alloy handles, fabricated type, anodised complete all as specified and directed. |
| 47 | S & F for 100mm butt hinges extruded aluminium alloy with galvanised mild steel /ss hinge and anodised ISI marked and fixed, complete all as specified and directed. |
| 48 | S & F for in repair Deco door seal size 1.5\\" width door bottom sealing strip draft Excluder stopper with aluminium plate & nylon bristles for weather stripping complete all as specified and directed. |
| 49 | Supplying and laying of CPVC pipes SDR 11 & Plain CPVC SDR 11 fittings on walls/ceiling or laying in floors complete all as specified. 16mm pipe outer dia, including taking down old pipe line any type complete all as specified and directed. |
| 50 | Supplying and laying of CPVC pipes SDR 11 & Plain CPVC SDR 11 fittings on walls/ceiling or laying in floors complete all as specified. 20mm pipe outer dia, including taking down old pipe line any type complete all as specified and directed. |
| 51 | S & F for in repair tubular towel rail brass chromium plated 20mm dia 'D' type 60cm long, complete all as specified and directed.Make: Prima or Equivalent. (Cat No.PSS-4503-A) |
| 52 | S & F for in repair towel ring brass chromium plated, complete all as specified and directed. Make: Prima or Equivalent. (Cat No.PSS-4503-B) |
| 53 | S & F for in repair Paper Holder brass chromium plated, complete all as specified and directed.Make: Prima or Equivalent. (Cat No.PSS-4503-F) |
| 54 | S & F for in repair CP Amaze square shower with arm (8'' x 8'') complete all as specified and directed. |
| 55 | S & F for in repair PVC Multi utility Mirror cabinet , complete all as specified and directed. |
| 56 | S & F for in repair Glass corner shelf 300mm with brass brackets, complete all as specified and directed. |
| 57 | S & F for inrepair vitreous china white table top wash basins (660x430x140mm) and connecting pipe complete all as specified and directed.(Make RAK Aurex or Euivalent) |
| 58 | S & F in repair vitreous china wash down one piece closet (White) size 747x370x650mm, with integrated cistern, incl soft close seat cover and twin flush fittings etc. complete all as specified and directed. Make: Prayag or equivalent (Cat No. 4353) |
| 59 | S & F for in repair health faucet cast copper alloy chromium plated with flexible chrome hose and wall hooks complete all as specified and directed. Make Jaquar/hindware/cera/johnson |
| 60 | S & F for cast copper alloy chromium plated bottle trap fixed to WHB and wall complete all as specified and directed.Make Parryware T3201A1 or equivalent |
| 61 | S & F for in repair Soap dish fancy type, fixed to plugs with chromium plated brass screws embedded in the wall complete all as specified and directed.Make : Prayag or equivalent (Cat No. BA-15) |
| 62 | S & F for in repair PVC connection, heavy duty 15mm bore, 60cm long with 2 Nos PTMT nuts of approved quality complete all as specified and directed. |
| 63 | S & F for in repair, 15mm bore Brass CP basin mixer for mixing hot & cold water for wash basin screwed down for iron pipe and fixed complete all as specified and directed.Make Jaquar/hindware/cera/johnson |
| 64 | S & F for in repair, 15mm bore Brass CP wall mixer three in one system with bend set Telephonic shower and 1.5 m tube with stand, complete all as specified and directed.Make Jaquar/hindware/cera/johnson |
| 65 | S & F for in repairs 15mm bore cast copper alloy chromium plated fancy bib tap long body , screwed for iron pipe complete all as specified and directed. Make Jaquar/hindware/cera/johnson |
| 66 | S & F for in repair fancy type angle valves 15mm bore , cast copper alloy chromium plated, screwed down high pressure screwed both ends for iron pipe or for unions and fixed etc complete all as specified and directed. |
| 67 | S & F for in repair 15mm bore stop valves (concealed), chromium plated cast copper alloy,with long shank and cap (Concealed type) screwed down, high pressure, with crutch or butterfly handle, screwed both ends for iron pipe or for unions fixed complete all as specified and directed |
| 68 | S & F for mild steel framed work such as grills, grating cooler stands, water tank staging etc, with ends of bars shouldered and / or riveted, or forged into spikes, framed guard bars, barred iron doors, ladders, framed balusters, walk ways, railing, frame work of water tanks and similar work conforming to Fe 290 Gde E-165 complete all as specified and directed. |
| 69 | S & F for 110mm PVC (SWR) pipes single socketed in any length with rubber joints fixed to wall or laid in floors / trenches with & including existing / new MS stack clamps of FI 50 x 3mm including taking down old pipe line any type complete all as specified and directed. |
| 70 | S & F for 75mm PVC (SWR) pipes single socketed in any length with rubber joints fixed to wall or laid in floors / trenches with & including existing / new MS stack clamps of FI 50 x 3mm including taking down old pipe line any type complete all as specified and directed. |
| 71 | S & F for 110mm bore PVC (SWR) bend / shoe of any radius with access door, complete all as specified and directed. |
| 72 | S & F for 75mm bore PVC (SWR) bend / shoe of any radius with access door, complete all as specified and directed. |
| 73 | S & F for in repairs PVC (SWR) floor trap/ Nahani trap 75mm, plain with grating including jointing to waste pipe fixed in cement concrete type (1:2:4) complete all as specified and directed. |
| 74 | S & F for in repairs 110mm bore PVC (SWR) vent cowl complete all as specified and direted pleases. |
| 75 | Excavation in trenches not exc 1.5m wide and n. exc 1.5m deep and getting out in hard dense soil complete all as specified and directed. |
| 76 | Demolition and bracking up drain pipe SWG line set in CM of description, 150mm dia including side packing / haunching complete all as specified and directed.` |
| 77 | M & L for PCC 1:3:6 type C-2 using 40mm graded aggregate for bed concrete to drain pipe packing under hunching for sides for 150mm dia SWG pipe lines complete all as specified and directed. |
| 78 | M & L for SWG drain pipe grade 'A' 150mm dia laid in trenches incl jointing in CM 1:3 complete all as specified and directed. |
| 79 | Returning and filling in approved earth including levelling spreading watering and well ramming in any layers n. exc 25cm thick complete all as specified and directed. |
| 80 | Removing excavated materials n. exc 100m and depositing where directed and complete all as specified and directed. |
| 81 | M & L cement concrete 1:2:4 using 40mm graded aggregate as in surface channel and drain complete all as specified and directed. |
| 82 | Extra for fair finishes drain or channel 30cm and over in girth in cement concrete using extra cement including forming mounds metred /stopped ends etc complete all as specified and directed. |
| 83 | M & L PCC (1:3:6) type C-1 using 20mm graded stone aggregate, 75mm thick as in plinth protection/flooring etc. finished fair & even laid in alternative bays n. exc 2M in length and joints filled with bitumen mastic 1:3 complete all as specified and directed. |
| 84 | M & L for preparation of new steel surfaces over 10 cm width or girth & applying two coats of synthetic enamel paint of 1st quality, complete all as specified and directed. |
| 85 | Dismantling of existing unserviceable RCC/PVC water tank of any capacity and S & F for 1000 Litres capacity rotational moulded polythene water storage tanks(cylindrical vertical with closed top ) hoisted & fixed in position complete all as specified and directed. |
| 86 | S & F for 20mm ball valves, high pressure of PTMT with epoxy coated aluminium rod and high density plastic ball, screwed for iron pipe of 20mm dia and fixed (minimum weight 210 gms) complete all as specified and directed. |
| 87 | Taking down existing tar felt or of any description including cement plaster or concrete of any thickness from the roof surfaces of building including cleaning the surfaces in all respect & preparing it for further treatment & removing rubbish from site complete all as specified and directed. |
| 88 | M & L for rendering 10mm thick in CM 1:4 mixed with water proofing compound @ 3% by weight of cement on fair faces of RCC/stone patti roof surfaces complete all as specified and directed. Note : (WPC will be measured and paid separately). |
| 89 | M & L for 40mm thick (avergae consolidated thickness) PCC (1:2:4) type B-0 using 12.5mm graded stone aggregate laid in slope as in padding, finished even and smooth on existing slope including provision of 'V' shaped groove 6mm wide and 10mm deep at 1.20 metre interval or parts thereof, both ways on top of PCC padding and filled with mastic bitumen of (1:1) proportion, incl coved filet complete all as specified and directed. |
| 90 | M & L roof treatment with APP modified polymeric water proofing membrane, 3mm thick having centre core not less than 100 micron high molecular high density polyethylene film (HMHDPE) protected on both sides with high polymeric asphaltic mix and 20 mircron HMHDPE film weight not less than 3.00 kg/ Sqm applied with bonding material using blown type bitumen primer Grade 85/25 @ 1.20 Kg/Sqm over bitumen primer conforming to IS -3384 @ 0.40 Kg /Sqm with final coat of bonding bitumen grade 85/25 @ 1.20 Kg /Sqm over APP membrane with all overlaps complete all as specified and directed. |
| 91 | M & L for 18-20mm thick black granite on kitchen platform, window cill ,Jambs, vanity counters and similar work over & including 15mm thick screed bed in CM 1:6 laid over sand stone slab machine cut, bedded and jointed with grey cement slurry and pointed with white cement with admixture of pigment to match the shade of granite stone including cutting, moulding and polishing complete all as specified and directed. |
| 92 | M & L for chequered cement concrete rubber moulded tiles 30 x 30 cm x 22-25 mm thick, set jointed and pointed in neat cement slurry in floors with grey cement and pigments over 15 mm screed bed in CM mortar 1: 6 complete all as specified and directed. |
| 93 | M & L for PCC 1:4:8 Type D2 40mm graded aggregate as in foundations, filling and mass concrete complete all as specified and directed. |
| 94 | Dismantling of fencing wiremesh, any type complete all as specified and directed. |
| 95 | Dismantling posts or struts (steel or RCC) of any section embeded in concrete, including taking out embeded portion and preparing post holes for providing new posts in any type of soil complete all as specified and directed |
| 96 | M & L for PCC 1:3:6 , type C-2, using 40mm graded crushed stone aggregate as in foundation, filling and mass concrete complete all as specified and directed. |
| 97 | M & L for MS work for fencing post /gates and struts made from angle iron and flat iron in any section including cutting tops to shape , drilling holes and notching for fixing of wires etc confirming to Fe -290 or Fe -330 complete all as specified and ditrected |
| 98 | Supply only chain link MS galvanised fencing ,any size or type complete all as specified and ditrected. |
| 99 | Fixing only chain link fencing including line wires, any mesh, size and type to any type of standards, rails, straining bolts etc including provision of binding wire complete all as specified and directed. |
| 100 | Supply and fixing for 3.15 mm dia galvanised medium coated as per IS 4826 steel wire as required for fixing chain link fencing etc complete all as specified and directed. |
| 101 | M & L for 5 to 10 mm dia mild steel screw bolts (machine made) with hexagonal or square head at one end and screwed the other, or screwed both ends each screwed end to be fitted with washers etc complete all as specified and directed. |
| 102 | M & L for preparation of new steel surfaces over 10 cm width or girth and applying two coats of synthetic enamel paint over a coat of red oxide primer complete all as specified and directed. |
| 103 | M & L for bitumen blown any grade, applied hot, two coats, to concrete surfaces at the rate of 1.5 Kg per sq m per coat and applying plythene film black, 50 micron laid in floors complete over sunken floor slab and embedded in side wall / covered fillet complete all as specified and directed.Note : Supply of water proofing compound shall be measured and paid separately. |
| 104 | M & L PCC (1:5:10) type E-2 using 40mm graded crushed stone aggregate as in sunken floors complete all as specified and directed. |
| 105 | Taking down carefully copper/aluminium point wiring (light, fan, socket or power) complete, including fittings such as switches, ceiling roses, holders, regulators, sockets etc., removing materials from site and making good disturbed surface of walls, floors etc complete all as specified and directed. |
| 106 | M&L for point wiring with 1.5 Sqmm. (nominal area) single core PVC insulated 1100 Volts, grade multi stranded FRLS copper conductor unsheathed cable in and including PVC rigid non metallic conduit medium grade not less than 20mm dia ISI marked and fittings and accessories concealed in walls/roof/ ceiling with suitable size of sunk type pressed steel modular terminal box and modular white cover plate with frame of suitable module as per site requirements for mounting of modular switches, sockets, fan regulator etc and one green colour cable of 1.5 Sqmm. (nominal area) single core PVC insulated 1100 Volts, grade multi stranded FRLS copper conductor unsheathed as earth wire up to common earth and connected to earth, complete all as specified and directed for the following : |
| 107 | One light point/bell point/ceiling fan/exhaust fan point controlled by one way 5 Amps single pole switch |
| 108 | One 5 pin 5 Amps socket outlet on same board with other switch |
| 109 | One 5 Pin 5 Amps socket outlet on independent board with other switch |
| 110 | One light point controlled by two, 2-way switches |
| 111 | All as per item No 106.00 above but with 2.5 Sqmm cross sectional area electric cable for 15 Amp socket outlet on independent board, complete all as specified and directed. |
| 112 | S&F in repair of modular switch 1 way 6/10Amp , 1 module, complete all as specified and directed. |
| 113 | S&F in repair of modular switch 1 way 16Amp, 1 module, complete all as specified and directed. Make: |
| 114 | S&F in repair of modular switch 2 way 6 Amp, 1 module complete all as specfied and directed. |
| 115 | S&F in repair of modular bell push, 6 Amp, 1 module, complete all as specified and directed. |
| 116 | S&F in repair of modular socket 6 Amp, 2/3 pin combined 2 module complete all as specified and directed. |
| 117 | S&F in repair of mdoular socket 6 Amp/16 Amp, 2/3 pin combined 2 module complete all as specified and directed. |
| 118 | S&F in repair modular stepped type ceiling fan regulator, 230 volt AC, 2 module, complete all as specified and directed. |
| 119 | S&F in repair of ceiling rose,surface type bakelite 65x17.5 mm, three terminals, complete all as specified and directed. |
| 120 | S&F in repair of door bell electric, ding dong type, AC 230 volts, single phase , complete all as specified and directed. |
| 121 | S&F in repair in repair lamp holder with 9W/11W LED Bulb PVC/polycarbonate type with back plate complete all as specified and directed. |
| 122 | Supply and fixing LED lights fitting 1 x 20W, 220V, Triyca three color CCT change LED batten which can change the color of batten from warm white to natural white to cool white with the help of a simple toggle switch., holder including LED tube light connecting up with three core flexible copper conductor cable of suitable size from ceiling rose complete all as specified and directed. |
| 123 | S&F in repair in repair LED mirror light fitting (warm white), 10 watt, 600 mm length complete with all accessories pre-wired and including connecting up with flexible copper conductor cable with suitable size complete all as specified and directed. |
| 124 | S&F in repair in repair LED light fittings, 10 W bulk head luminaries 230V, 50 Hz complete with all accessories and including connecting up with three core copper conductor cable with suitable size complete all as specified and directed. |
| 125 | Supply and fixing LED street light fitting 35 Watt 230 V AC outdoor type with high pressure die cast aluminum hosing and heat resistant complete with driver, lamp bracket with impact and corrosion resistant including thermal management in multiple optics complete with IP 65/66 protection complete including treet light bracket made of 32 mm GI pipe , 1.2 mtr lenght fixed with two nos of clamp , nut and bolts complete all as specified and directed. |
| 126 | Taking down UNSV Fan and deposite to MES Store yardSupply and fixing ceiling fans complete with blades, down rods, remote and accessories, 230 V, 1400 mm sweep. Min air delivery 210 CFM with service value 6.00 BEE. Five star rated with brushless direct current motor (BLDC) complete with motor, blade set of three nos , down rod, canopy, shackle assy complete all as specified and directed. |
| 127 | S&F steel body heavy duty exhaust fan 380/400mm sweep, double ball bearing, copper wound, with louvers/shutter, 230 volts, 50 Hz, including electrically connecting from ceiling rose to fan connector with 0.5 Sqmm strandard copper conductor 3 core flexible cabCutting openings, through bricks walls in round shape, for 300mm dia exhaust fan and making good in cement mortar 1:3 or cement concrete 1:2:4 type B-1 as required including finishing up and matching the disturbed surface and removing surplus unserviceable bricks, hard-core etc from site and rubbish complete all as specified and directed. |
| 128 | Taking down UNSV Geyser and deposite to MES Store yard and Supply and fix in repair electric water heater, storage type steel body with fiber flass coated inner tank and heating element upto 2 KW capacity 25 litre, BEE 5 Star rated including complete water connection complete with all accessories such as safety valve, thermostate, stop valve, bib tap,flexible pipe etc complete all as specified and directed. |
| 129 | M & L for Submain wiring with two single core PVC insualated, unseathed, FRLS, 1100 volts grade 4 Sqmm multi stranded copper conductor cable drawn through and including 25 mm dia PVC non metallic rigid conduits and the conduits accessories incl one run of green colour earth continuity conductor with 4 Sqmm multi stranded copper conductor cable, in concealed conduit in wall/ roof/ ceiling or casing caping for geyser and AC complete all as specified and directed. Note : Two run of single core cable, one run of earth continuity conductor shall be measured as one unit length. |
| 130 | M & L for Submain wiring with two single core PVC insualated, unseathed, FRLS, 1100 volts grade 6 Sqmm multi stranded copper conductor cable drawn through and including 25 mm dia PVC non metallic rigid conduits and the conduits accessories incl one run of green colour earth continuity conductor with 6 Sqmm multi stranded copper conductor cable, in concealed conduit in wall/ roof/ ceiling, complete all as specified and directed. Note : Two run of single core cable, one run of earth continuity conductor shall be measured as one unit length. |
| 131 | S & F in repair of MCB SP, 240 volt, 6 Amp to 32 Amp capacity, 10 KA, 'C' curve complete all as specified and directed. |
| 132 | S&F in repair of MCB SPN 10 to 40 Amp capacity, 10KA , 'C' curve complete all as specified and directed. |
| 133 | S&F in repair of MCB TPN 63 Amp capacity,415 volt complete all as specified and directed. |
| 134 | S&F in repair in repair MCB distribution board single pole & neutral with 200 Amps rated bus bar, double door, IP-43, DB's made out of CRCA sheet steel enclosure, recessed type, factory made powder coated, 8 way, 240 volts suitable for housing MCB's and isolator's complete in all fixing material/accessories etc complete all as specified and directed. |
| 135 | S&F in repair of in repair MCB distribution board triple pole & neutral IP-43 double door metal, 4 way ,415 volt made out of CRCA sheet steel , factory made powder coated with insulated bus bars , shrouded neutral bars, earth bars , made out of sheet steel enclosure, recessed type, factory made powder coated suitable for housing MCB's complete all as specified and directed. . |
| 136 | S & F in repair single pole and neutral enclosure with a two pin and earth plug and socket complete with one single pole 20 Amp MCB SP `C' series for geyser & AC complete all as specified and directed. |
| 137 | Removing excavated material not exceeding 50 mtrs and depositing where directed at a level n. exc 1.5mtr above the starting point complete all as specified and directed. |
| 138 | M&L for dry river sand and punning for cushioning and cover for protection of under ground electric cable complete all as specified and directed. |
| 139 | Material and labour for un-reinforced pre-cast concrete cable covers, class LV type-1, flat size 250mm x 150mm x 40mm thick complete all as specified and directed. |
| 140 | S & F GI tubes 40mm , Light grade (ISI marked), galvanized iron with and including all fitting (ISI marked) for Cable protection laid in trench/wall/pole etc complete all as specified and as directed |
| 141 | Supply, laying and testing cable XLPE Insulated ,screened, PVC bedded, galvanized steel strip or wire armoured, electric power cables (heavy duty) 1100 Volts grade with stranded aluminium conductor of size 50 sq mm 3½ core complete all as specified and directed. |
| 142 | M & L for earthing complete with GI earth plate electrode 60 cm x 60 cm x 6 mm thick, buried directly in ground (earth pit not less than 2.25 mtr deep below normal ground level) with top edge of the plate not less than 1.5 mtrs below normal ground level connected to GI lead wire 4.00 mm dia by means of bolts, nuts, check nuts and washers of galvanized iron or steel all as shown in electric plate No 3 of SSR Part-I connected to continuous earth wire on main switch board all as specified or indicated and testing on completion including provision of earth wire protection by 15 mm dia medium grade GI pipe and watering pipe shall be 20 mm bore, medium grade including excavation & earth work in any type of soil & disposal of soi, providing alternate layers of charcoal and common salt, constr of PCC earth chamber in mix 1:3:6 type C-1 with 40mm thick RCC 1:2:4 type B-1 cover with handle made out oof 8mm dia bars, watering arrangement with funnel & wire mesh, complete all as specified and directed. Note : The unit rate includes for protection pipe and GI wire 4.00 mm from top of earth plate up to 7.5 meter above ground level. Please Enable Macros to View BoQ information |
| 143 | M & L for earthing complete with GI earth plate electrode 60 cm x 60 cm x 6 mm thick, buried directly in ground (earth pit not less than 2.25 mtr deep below normal ground level) with top edge of the plate not less than 1.5 mtrs below normal ground level connected to GI lead wire 4.00 mm dia by means of bolts, nuts, check nuts and washers of galvanized iron or steel all as shown in electric plate No 3 of SSR Part-I connected to continuous earth wire on main switch board all as specified or indicated and testing on completion including provision of earth wire protection by 15 mm dia medium grade GI pipe and watering pipe shall be 20 mm bore, medium grade including excavation & earth work in any type of soil & disposal of soi, providing alternate layers of charcoal and common salt, constr of PCC earth chamber in mix 1:3:6 type C-1 with 40mm thick RCC 1:2:4 type B-1 cover with handle made out oof 8mm dia bars, watering arrangement with funnel & wire mesh, complete all as specified and directed. Note : The unit rate includes for protection pipe and GI wire 4.00 mm from top of earth plate up to 7.5 meter above ground level. Please Enable Macros to View BoQ information |
