Sales : +91-777 804 8217
| Sl. No. | Item Description |
| 1 | B & R Division Items |
| 2 | Demolition of cement concrete (un-reinforced) in ground floors and pavings not exceeding 15cm thickness (below or above ground level) and removal of debris complete all as specified and as directed. |
| 3 | Demolition of reinforced cement concrete in roofs, floors (other than ground floors), beams, staircases, landing, chajjas and similar suspended work complete all as specified and as directed. |
| 4 | Demolition of brickwork or stone / boulder masonry, built in cement mortar including all quoins, arches, pillars, etc but excluding ashlar facings, dressed stonework and precast concrete articles and disposing off complete all as specified and as directed. |
| 5 | Demolition of reed lathing, single or double including battens and plaster or chiken wire lathing complete all as specified and as directed. |
| 6 | Dismantling floor hearth or wall tiling including cement mortar bedding (but not backing) and disposing off complete all as specified and as directed. |
| 7 | Dismantling of timber scantling 40sqcm and over in section, in any position in unframed works complete all as specified and as directed. |
| 8 | Dismantling of timber fillets rails, posts, rafters, purlins etc under 40 Sqcm in section, in any position in unframed work complete all as specified. |
| 9 | Dismantling boarding any description fixed in any position with nails complete all as specified and directed. |
| 10 | Dismantling mild steel work or wrought iron of any description and in any position complete all as specified and as directed. |
| 11 | Dismantling plain or corrugated steel sheeting, any gauge or any thickness as in roof covering, wall cladding, etc.including all necessary staging / scaffolding, etc. as required complete all as specified and as directed. |
| 12 | Dismantling asbestos cement (corrugated/semi corrugated) in roof coverings, etc including ridges, claddings, etc. and disposing off including all necessary staging / scaffolding, etc. as required complete all as specified and as directed. |
| 13 | Dismantling wall and ceiling boards (AC,fibre,pulp, insulation, etc.) or insulation boards/slabs/blankets, any thickness including cover fillets, frameworks, etc. complete all as specified and as directed. |
| 14 | Dismantling rain water pipe and sewage line pipe of any type and any size including fitting complete all as specified and as directed. |
| 15 | Taking down cement or cement/lime plaster, any description on brick or stone walls, etc. including raking out joints, hacking for keys, scubbing down with water, etc. including all necessary scaffolding as required and rubbishing off the premises, etc. complete all as specified and as directed. |
| 16 | Taking down chowkhats or frame with shutters (without taking off shutters from frame) each not exceeding 1.50 Sqm each complete all as specified. |
| 17 | Taking down chowkhats or frame with shutters (without taking off shutters from frame) each exceeding 1.50 Sqm but not exe 4 Sq cm each complete all as specified. |
| 18 | Taking down wooden shutters of size not exceeding 1.0sqm and disposing off complete all as specified and directed. |
| 19 | Taking down wooden shutters of size exceeding 1.0sqm but not exceeding 2.0sqm and disposing off complete all as specified and directed. |
| 20 | Taking down wooden shutters of size not exceeding 1.0sqm and refixing in same opening after minor repairs, easing out, etc. complete all as specified and directed. |
| 21 | Taking down wooden shutters of size exceeding 1.0sqm but not exceeding 2.0sqm and refixing in same opening after minor repairs, easing out, etc. complete all as specified and directed. |
| 22 | Taking up or down 15mm bore steel water tubing and connections from any location / position including disposing off, etc. complete all as specified and as directed. |
| 23 | Taking up or down 20mm bore steel water tubing and connections from any location / position including disposing off, etc. complete all as specified and as directed. |
| 24 | M&L for 75mm thick plain cement concrete 1:4:8 type D-2 (using 40mm graded stone aggregates) as in sub-bases for floors, complete all as specified and as directed. |
| 25 | M&L for 75mm thick cement concrete 1:3:6 type C2 (using 40mm graded stone aggregate) as in plinth protection finished even and smooth without using extra cement laid in panels and joints filled with bituminous mastic filling with 1 part of bitumen and 3 part of sand complete all as specified and directed. |
| 26 | M&L for plain cement concrete 1:3:6 (type C-2) using 20mm graded stone aggregate as in beds of drains, surface channels, foundations of manholes, etc. complete all as specified and as directed. |
| 27 | Extra for forming fair finished drain or channel 30cm inner girth in cement concrete, using extra cement, including forms, moulds, mitred / stopped ends etc. complete all as specified and as directed.Note: Inner girth shall only be measured. |
| 28 | Add or deduct for each 25 mm girth or part thereof over or under 30cm (for adjustment in girth of item No mentioned above) |
| 29 | Use and waste formwork to soffits of suspended slabs such as roof slabs, floor slabs, landings and similar work; not exceeding 200mm thick (Horizontal or sloping) flat rough finished surface of concrete complete all as specified and as directed. |
| 30 | M&L for reinforced cement concrete (1:1.5:3) type A1 (using 20 mm graded aggregate) as in Slabs supported on walls, beams and columns in floors,roofs, landings, balconies, canopies, deck slabs and in shelves and the like complete all as specified and directed. |
| 31 | S & F Mild steel TMT bars 10mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia complete all as specified and directed. |
| 32 | Material and labour for Mild steel TMT bars 6 mm dia and over upto and including 10 mm dia in stirrups, spacers and binders, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.90 mm dia or securing with clips complete all as specified and directed. |
| 33 | M&L brick work with sub class ‘B’ brick straight or curved on plan exe. 6 meters mean redius built in cement mortar 1:6 complete all as specified and as directed. |
| 34 | M&L brick work with sub class ‘B’ brick straight or curved on plan to any radius in half brick wall in cement mortar 1:4 complete all as specified and as directed. |
| 35 | M&L for rendering 5mm thick plaster, in cement mortar (1:3) on fair faces of concrete surfaces of soffits of slabs, ceilings, etc. finished fair and even and without using extra cement complete all as specified and as directed. |
| 36 | Material and labour for 10 mm thick rendering in cement mortar (1:6) on other side of lathing surface finished even and smooth without using extra cement all as specified. |
| 37 | M&L for rendering 10mm thick in cement mortar (1:6) on other than fair surfaces of PCC block / brick masonry wall / concrete surfaces, etc. finished fair and even without using extra cement complete all as specified and as directed. |
| 38 | M&L rendering 15 mm thick cement plaster in two layer each of 10+5 mm thick on fair faces of brick wall or condrete surfaces in CM (1:4) & water proofing compound mixed with second layer @ 3% finished fair and even complete all as specified. ( Note -W.P.C. shall be measured and paid separetly . ) |
| 39 | M&L rendering 15 mm thick cement plaster in two layer each of 10+5 mm thick on one side of lathing in CM (1:4) & water proofing compound mixed with second layer @ 3% finished even and smooth all as specified.( Note -W.P.C. shall be measured and paid separetly . ) |
| 40 | S & F for GI wire netting 0.71 mm dia and 12 mm mesh lathing to wood or metal studding joints etc in walls ceiling stanchion, beams etc included all laps cutting and wastes complete all as specified and as directed. |
| 41 | Supply only integral water proofing compound all as specified. |
| 42 | M&L for non-skid ceramic tiles, coloured, area of tile exceeding 0.11sqm but not exceeding 0.18sqm each, 7 to 8mm thick of superior quality as in floors, etc. and jointed in neat cement slurry and pointed in white cement (mixed with colouring pigment to match the colour of tiles), laid over and including 15mm thick screed bed in CM 1:4 complete all as specified and as directed. |
| 43 | M&L for non-skid ceramic tiles, coloured, area of tile exceeding 0.11 sqm but not exceeding 0.18 sqm each, 7 to 8mm thick of superior quality as in skirting, etc. and jointed in neat cement slurry and pointed in white cement (mixed with colouring pigment to match the colour of tiles), laid over and including 10mm thick backing coat in cement mortar 1:4 laying of skirting/dado on walls complete all as specified and as directed. |
| 44 | M&L for light shade Vitrified Ceramic tiles 8 mm thick (square/ rectangular) polished, area of each tiles exceeding 0.18sqm but not exceeding 0.36 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match colour of tile over & including 15 mm thick screed bed or bedding layers in cement mortar 1:6 complete all as specified and directed. |
| 45 | M&L for light shade Vitrified Ceramic tiles 8 mm thick (square/ rectangular) polished, area of each tiles exceeding 0.18sqm but not exceeding 0.36 sqm, as in skirting etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match colour of tile over & including 10mm thick backing coat in cement mortar 1:4 laying of skirting/dado on walls complete all as specified and directed. |
| 46 | M&L for Non - skid Ceramic tiles 7 to 8 mm thick, coloured, area of each tiles exceeding 0.18sqm but not exceeding 0.36 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match colour of tile over & including 15 mm thick screed bed or bedding layers in cement mortar 1:6 complete all as specified and directed. |
| 47 | M&L for Non - skid Ceramic tiles 7 to 8 mm thick, coloured, area of each tiles exceeding 0.18sqm but not exceeding 0.36 sqm, as in skirting etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match colour of tile over & including 10mm thick backing coat in cement mortar 1:4 laying of skirting/dado on walls all as specified and directed. |
| 48 | M&L for 7-8mm thick Non skid ceramic paver tiles (Endura-Johnson/Paver orientor equivalent in somany/Kajaria) area of each tile exceeding 0.06 Sqm but not exceeding 0.11 Sqm as in floor set, jointed &pointed with white cement and pigment over and including 20mm thick screed bedding layer in cement mortar (1:6) over brushing with neat cement slurry with 3.00 Kg of cement per Sqm complete all as specified and directed. |
| 49 | M&L of Glazed ceramic coloured tiles in vertical surface size 450mm x 300mm x & ( 6mm to 7mm ) as in skirting etc thick set and jointed in neat cement slurry and pointed in white or colour cement to match including 10mm thick backing coat in cement mortar 1:4 laying of skirting/dado on walls all as specified and directed. |
| 50 | M&L chequered coloured tiles 25mm thick, area of each tile exceeding 0.04sqm but not exceeding 0.11sqm, in floors, set, jointed & pointed with neat white cement slurry mixed with pigment to match colour of tile, laid over and including 20mm thick screed bed or bedding layer in cement mortar (1:6) (rate shall be included) complete all as specified and as directed. |
| 51 | M&L in for 18-20mm thick granite stone slab, of any type, table rubbed and polished, in steps, jambs, pillars, window cills, cooking platforms and the like in laid over and including 15mm thick screed in cement mortar (1:4) (rate shall be included) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of slab and taking off old damaged slab and disposing off complete all as specified and as directed. |
| 52 | S & F 6mm thick asbestos cement corrugated / semi-corrugated sheets in roof / walls fixed with 'L' or 'J' hooks or cranked hook bolts, and bituminous washers, etc. and joints suitably sealed, complete all as specified and as directed |
| 53 | Fixing only 6mm thick asbestos cement corrugated / semi-corrugated sheets in roof / walls fixed with 'L' or 'J' hooks or cranked hook bolts, and bituminous washers, etc. and joints suitably sealed, complete all as specified and as directed.Note: Old sheet will be obtained from respective dismantling item. |
| 54 | Supply and fix pre-painted galvalume aluminium zinc coating GI based corrugated steel sheet 0.50mm thick of an colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws as specified. |
| 55 | Supply and fix pre-painted galvalume aluminium zinc coating GI based plain steel sheet 0.50mm thick of an colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws as specified. |
| 56 | S&F Framed work such as grills, gratings, etc., with ends of bars shouldered and or riveted, or forged in to spikes; framed guard bars; similar work conforming to Fe 290 Gde E-165 complete all as specified and directed. |
| 57 | Supply and fix Bands, straps, supports or stays for rainwater, ventilating pipes, including bolts, if required: hooks (stay), heavy, for large gates; hook and pintle hinges large hasps and staples; chains; hand made sliding bolts; clamps; hold fasts; wall ties; hooks for hanging fans; plain angle cleats for securing purlins to wood trusses or rafters; knee piece inserts; two way and three way straps, plate washers and similar small articles conforming to Fe-290 Gde-E-165 complete all as specified and directed. |
| 58 | S&F plates (plain or chequered) channels, square cut or notched (ordinay and counter sunk) forming holes, without any attachment of Fe 410W (Gde-E -250) Quality 'B' complete all as specified and directed by Engr-in-Charge. |
| 59 | Supply and fix Steel work in trusses, purlins, posts and the like using tubular/ square hollow sections including special shaped washer etc. complete using ERW or induction butt welded tubes/SHS conforming to IS.1161 - 2014 / IS.4923 - 1997 grade St.-210 complete all as specified and directed. |
| 60 | Supply and fix 2nd class hard wood plain, solid, straight chowkats and frames, wrought, framed rebated on the solid rounded or chamfered, put together with glue, pinned at joints complete all as specified. |
| 61 | Material and labour for Second class hardwood in scantlings timber unframed and fixed for wrought in section complete all as specified and directed. |
| 62 | Material and labour for Second class hardwood in scantlings timber unframed and fixed for clean sawn in section complete all as specified and directed. |
| 63 | S&F 2nd class hard wood glazed and skeleton ventilator/window 30 mm thick open rebated and prepared to receive glass, wiremesh gauge etc (without sash bars), edge of framing plain chemfered rounded fitted with cut and mitred beds for securing glass etc size of members size of members of shutter as specified in SSR part I section 8 clause 8.20(b) complete all as specified and directed. |
| 64 | Material and labour Second class hard wood as in 35 mm thick Plain, framed,panelled shutters (any number of panels), with panels of timber flat on both sides (feather edged), or of veneered particle board medium density, wood particle board with commercial face veneers: supplied and fitted to chowkats complete all as specified & directed . |
| 65 | M&L 2nd class hard wood, 35 mm thick, glazed and skeleton shutter, divided into square, with plain, chamfered or rounded mitered and , any number of panels, prepared to receive glass, gauge etc. edges of frames chamfered or round size of numbers of shutters as specifed in SSR Part-I section clause 8.24 (a) complete all as specified and directed. |
| 66 | S & F 30 mm thick Flush shutters, solid core construction, with block board core and plywood face panels, commercial type on both sides , smooth finish with lipping of teak wood on edges complete all as specified and directed. |
| 67 | Supply and fix second class hard wood 50 mm thick boarding, clean sawn, fixed with nails in any position (except flooring and skirting) with butt joints complete all as specified and directed. |
| 68 | Supply and fix second class hard wood 20 mm thick boarding,planed one side. fixed with nails in any position (except flooring and skirting) with butt joints complete all as specified and directed. |
| 69 | M&L for 18mm / 19mm thick block boards, grade 2 quality, interior grade, decorative type with decorative face veneer on one face, fixed with screws to timber frame work complete all as specified and directed. |
| 70 | Material and labour for 4 mm thick Asbestos cement plain building boards, fixed to timber framework with screws complete all as specified and directed. |
| 71 | M & L for 2nd class hardwood fillets square, rectangular or tringular in section clean sawn screwed with nails exc 6 sqcm and not exc 13 sqcm complete all as specified and directed. |
| 72 | M & L for 2nd class hardwood fillets square, rectangular or tringular in section clean sawn screwed with nails exc 13 sqcm and n.exc 25 sqcm complete all as specified and directed. |
| 73 | Material and labour for second class hard wood plain fillets, square, rectangular and triangular in section, wrought , bull nosed, splayed, chamfered or rounded on one edge or face, sectional area exceeding 6 sqcm but not exceeding 13 sqcm all as specified. |
| 74 | S & F Solid PVC door frame of size 50 mm x 47 mm made of 5 mm plain colour PVC sheet reinforced with mild steel square tube complete all as specified in clause 8B.3.1 and shown on page 150 of MES Schedule Part-II (2010) complete all as specified and directed. |
| 75 | S & F Factory made solid panel PVC door shutter 30 mm thick (style) consisting of frame made out of MS tubes for top & bottom rails, MS frame covered with heat moulded plain colour PVC ‘C’ channel having a PVC sheet strip of 20 mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail; paneling of plain colour PVC sheet to be fitted in the MS frame welded/sealed to the stiles & rails with suitable PVC sheet beading and jointed together with solvent cement, supply and fixing in the frame at site as per clause 8 B.2.1 of MES schedule Part-II (2004) complete all as specified. Make: Rajshri or equivalent as approved. |
| 76 | S&F Factory Made 28 to 30mm thick single/double leaf Solid PVC Moulded Door Shutter with particle board core, (stiles), with 2, 4, or 6 raised panel design with 2mm thick 3D wood grain Moulded PVC Sheet plyurethane painted on the front face & 2mm plain colour termite proof , water proof and fire resisitant PVC sheet on back face, supplying & fixing in frame at site as per specification complete all as specified and directed. |
| 77 | S & F Factory made wire gauzed PVC moulded door shutter 30 mm thick (style) panel will be of wire gauze in lieu of single side prelaminated sheet panel. The wire gauze shall be wrapped on an additional sqaure 8mm MS solid tube and this tube shall be welded to MS tubes the the wire gauze shall be stretched and tightened firmly consisting of frame made out of MS tubes for top & bottom rails, MS frame covered with heat moulded plain colour PVC ‘C’ channel having a PVC sheet strip of 20 mm width stuck inside with solvent cement for stiles and prelaminated colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail; paneling of plain colour PVC sheet to be fitted in the MS frame welded/sealed to the stiles & at site as per clause 8 B.2.1 of MES schedule Part-II (2004) complete all as specified and directed.Make: Rajshri or equivalent as approved. |
| 78 | S & F Pressed steel frames made of 1.25mm thick MS sheet of profile 125X60mm for door and window frames with one or more rebates including hinges (100/50mm stainless steel),lock strike plate, shock absorber, 20mm dia 60mm long MS conduit for housing of a drop bolt, treating of internal surfaces of chowkhats with coal tar or black paint including hinges, hold fasts/lugs etc complete all as specified and directed. |
| 79 | S & F Pressed steel frames made of 1.25mm thick MS sheet of profile 105X60mm for door and window frames with one or more rebates including hinges (100/50mm stainless steel),lock strike plate, shock absorber, 20mm dia 60mm long MS conduit for housing of a drop bolt, treating of internal surfaces of chowkhats with coal tar or black paint including hinges, hold fasts/lugs etc complete all as specified and directed. |
| 80 | M & L for cement concrete 1:3:6 type C-1 (using 20mm graded stone aggregates) as in back filling of steel frame and holdfasts, etc. including necessary formwork complete all as specified and as directed. |
| 81 | S & F Steel ventilator with top hung shutter including hinges, steel peg stay, lugs as in hold fast with locking arrangements, complete all as specified. |
| 82 | S & F Steel windows with side hung shutters including box type hinges with steel handles, 100mm long peg stay complete with glazing bars, dovetailed or welded, including locking arrangements ccomplete all as specified and directed. |
| 83 | S & F Steel windows with side hung shutters including box type hinges with steel handles, 100mm long peg stay complete without glazing bars, dovetailed or welded, including locking arrangements complete all as specified and directed. |
| 84 | S & F cupboard shutter made of 1.00mm thick MS sheet fabricated with edges bend to shape including suitable to single rebate pressed steel frame of 1.25mm thick MS sheet of profile 105 x 60mm with stainless steel hinges, standard rim locking arrangement, handles including all necessary fittings drilling hold fast/lugs with two coat synthetic enemal paint over one coat of red oxide primer finish as approved colour complete all as specified. |
| 85 | S & F Powder coated aluminium (minimum thickness of powder coating 50 micron) for shutters and frames of doors, windows & ventilators including providing and fixing hinges/ pivots and making provision for fixing of fittings wherever required including the cost of EPDM rubber/neoprene gasket required (Fittings shall be paid for separately) with extruded built up standard tubular sections/ appropriate Z sections and other sections of approved make conforming to IS: 733 and IS:1285, fixing with dash fasteners of required dia and size, including necessary filling up the gaps at junctions, i.e. at top, bottom and sides with required EPDM rubber/ neoprene gasket etc. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, Aluminium snap beading for glazing/ paneling, C.P. brass/ stainless steel screws all complete as per architectural drawings and the directions of Engineer-in-charge. |
| 86 | M & L for 12 mm thick Medium density fibre board exterior grade, prelaminated on both side with decorative choice lamination & other side balancing white lamination, all as directed. |
| 87 | Supply & Fixed Stainless steel wire cloth 0.36mm nominal dia of wire and average width of aperture 1.40 mm all as directed and specified. |
| 88 | Supply & Fixed as in repair Stainless steel wire cloth 0.36mm nominal dia of wire and average width of aperture 1.40 mm all as directed and specified. |
| 89 | S&F 3.00 mm thick sheet glass ordinary quality and glazing with oil putting square nexc 0.5 sqm in each pane complete all as specified and directed. |
| 90 | S&F 3.00 mm thick sheet glass ordinary quality and glazing with oil putting including hacking out old broken glass (any thickness, size quality or description) from wooden frame or stone,concrete or brick surrounds, glazed with putty or fixed with beads complete of size Square nexc 0.5 sqm in each pane complete all as specified and directed. |
| 91 | S&F 4.00 mm thick sheet glass ordinary quality and glazing with oil putting square nexc 0.5 sqm in each pane complete all as specified and directed. |
| 92 | S&F 4.00 mm thick sheet glass ordinary quality and glazing with oil putting square exc 0.5 sqm in each pane complete all as specified and directed. |
| 93 | S&F 300 mm length of Aluminium alloy, anodised, sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast-aluminium alloy complete all as specified. |
| 94 | S&F in repair 300 mm length of Aluminium alloy, anodised, sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast-aluminium alloy complete all as specified. |
| 95 | Supply and fix 200 mm long aluminum anodised barrel tower bolts of extruded section complete all as specified and directed. |
| 96 | Supply and fix in repairs 200 mm long aluminum anodised barrel tower bolts of extruded section complete all as specified and directed. |
| 97 | Supply and fix 150 mm long aluminum anodised barrel tower bolts of extruded section complete all as specified and directed. |
| 98 | Supply and fix 100 mm long aluminum anodised barrel tower bolts of extruded section complete all as specified and directed. |
| 99 | Supply and fix in repairs 100 mm long aluminum anodised barrel tower bolts of extruded section complete all as specified and directed. |
| 100 | Supply and fix 150 mm long aluminium handles cast type anodised complete all as specified & directed . |
| 101 | Supply and fix in repair 150 mm long aluminium handles cast type anodised complete all as specified & directed . |
| 102 | Supply and fix 125 mm long aluminium handles cast type anodised complete all as specified & directed . |
| 103 | Supply and fix in repair 125 mm long aluminium handles cast type anodised complete all as specified & directed . |
| 104 | Supply and fix 100 mm long aluminium handles cast type anodised complete all as specified & directed . |
| 105 | S&F 100mm long Butt hinges, extruded aluminium alloy with galvanised mild steel hinge pin, anodised and fixed complete all as specified and directed. |
| 106 | Supply and fix 100 mm size cold rolled mild steel butt hinges medium weight complete all as specified & directed. |
| 107 | Supply and fix 75 mm size stainless steel butt hinges medium weight complete all as specified & directed. |
| 108 | S & F double action spring hinges, mild steel with steel wire spring, stove enamelled, black, size of spring hinge 150mm complete all as specified and as directed. |
| 109 | S & F in repair Door closer hydraulically regulated, designation No. 3, universal type, aluminium (extracted body) suitable for door shutters of 851 to 1000 mm in width and of weight between 61 to 80 kg and fixed all as specified and as directed. |
| 110 | S & F Door stopper of aluminium alloy body and tongue, anodised with hard drawn steel springs, fixed to door with over all length 150mm with rubber bush complete all as specified and directed. |
| 111 | S & F as in repair Mortice lock, vertical type size 100mm, of brass 04 levers vertical type complete all as specified and directed. |
| 112 | S&F in repair 25 mm dia and 1mm thick MS chromium plated curtain rods with fixing side brackets end knobs ,rings@10 Nos per running meter and fixed with PVC rawl plugs & steel screws as in repairs etc all as specified and directed . |
| 113 | Supply and fix, as in repair, vitreous china wash basin, white flat back size 550 x 400 mm, excluding taps, waste chain, plug and porcelain stopper but including brackets, cutting for and pinning in ends of bracket or erecting stand complete all as specified. |
| 114 | S&F as in repairs vitreous China wash down water closet pan fancy type, one piece, white, with seat cover, closed pattern with cover and chromium plated mild steel or aluminum anodized hinge device and jointing and connecting up complete all as specified and as directedMake: Cat No. S-220 Elegance of Hindware or equivalent of Roca, Plumber, Kohler, Jaquar |
| 115 | S&F as in repairs wash hand basin, vitreous China, white, counter top type, of size 560x461mm, oval shaped, of approved design, with waste coupling and including PVC connection 60cm key with brass union complete all as specified and as directed |
| 116 | Supply & fixed in repairs Vitreous china wash down water closet pan ( pedestal pattern ) , white with P or S trap incl. seat cover but excluding fixing bolts, flushing cistern and flush pipe complete all as specified and as directed. |
| 117 | Supply and fix as in repair, vitreous china squatting pan of Orrisa pattern size 580mm x 440 mm white with integral foot rests (excluding flushing cistern and flush pipe) including connection making good to floor all as specified . |
| 118 | S&F as in repair plastic water closet seat, white, closed pattern with flat bottom, and cover and mild steel chromium plated or aluminised hinging device complete all as specified and as directed |
| 119 | S &F in repairs Vitreous China urinals, bowl type urinal flat back, size of 465 x 355 x 265 mm white (minimum), with grating and union for discharge pipe (back or corner wall type), complete including providing and fixing plugs, bedding urinal against wall in cement mortar 1:2, securing urinal to plugs with and including 60mm long brass screws, pointing around urinal back in cement; fixing automatic flushing cistern with brackets, flush pipe, grating and Union for discharge pipe. (Exclusive of fixing supply pipe to flushing cistern, trap and waste pipe) |
| 120 | S&F as in repairs 600mm X 450mm bevelled edge mirror of selected quality glass, mounted on 6mm thick AC building board or commercial plywood and fixed to wooden plugs with chromium plated brass screws and cup washers complete all as specified and directed. |
| 121 | S & F in repairs PVC valveless,syphonic action type,low level PVC flushing cistren 10 ltr cap white with flush pipe &all fitting and flush pipe complete all as specified. |
| 122 | Supply and fix, as in repair 15 mm bore bib taps fancy type ,chromium plated, cast copper alloy with crutch or butter fly handle, screwed down, screwed for iron pipe or for brass ferrule all as specified. |
| 123 | Supply and fix as in repair 15 mm bore pillar tap fancy type , cast copper alloy, with capstan head, chromium plated, screwed down high pressure, with or without letter Hot or Cold with long screwed shanuls and fly nuts, screwed for iron pipe complete all as specified. |
| 124 | Supply and fix as in repair angle stop valve fancy type , cast copper alloy,chromium plated ,screwed down high pressure, with crutch or butterfly handles for 15 mm bore pipe or for unions all as specified. |
| 125 | S & F as in repair Bib tap of fancy type PTMT any colour high pressure screwed for iron pipe and fixed. (Minimum weight 15mm-90gms/20mm125gms) complete all as specified. |
| 126 | S & F as in repair Pillar tap of fancy type PTMT any colour high pressure screwed for iron pipe and fixed (Minimum weight 15mm-110gms) complete all as specified. |
| 127 | S & F as in repair PVC connections 15 mm size with PTMT nuts of length 450 m complete all as specified. |
| 128 | Supply and fix as in repair 32 mm dia and 800mm long PVC flexible corrugated waste pipe for wash basin/sink complete all as specified and as directed.(Prayag CAT No. 327) |
| 129 | Supply and fix 125mm dia CP brass shower rose with swivel joints, any colour including shower arm 15mm dia, 195mm long with bend of 45 degree with flange of CP brass approved make like Parryware of CAT No-T9809A1 or Equivalent as in repair complete all as specified. |
| 130 | S&F as in repairs toilet paper holder recessed type vitreous China of approved design complete all as specified and as directed |
| 131 | S&F as in repairs stainless steel CP soap dish, 110mm size, of approved design, any type, fixed to plugs with chromium plated brass screws complete all as specified and as directed |
| 132 | S&F as in repairs tubular towel rail 20mm dia ‘D’ type 60cm long between flanges of aluminium anodised, including brackets complete all as specified and as directed |
| 133 | S&F as in repairs for 15mm bore brass CP basin mixer, 2 in 1, of approved design, for mixing hot & cold water screwed down for iron pipe complete all as specified and as directed |
| 134 | S&F as in repairs for 15mm bore brass CP wall mixer, 2 in 1, of approved design, for mixing hot & cold water screwed down for iron pipe complete all as specified and as directed |
| 135 | S & F as in repair sheet glass shelf assembly consisting of 5.5mm thick sheet glass shelf 12cm wide with chromium plated bracket guard and railing, 60cm long fixed in position with CP screws complete all as specified and as directed |
| 136 | S & F as in repair 12mm thick corner glass shelf, 250mm radius, with flanges of brass chromium palted D clamps, including brackets and railing fixed with CP scrws complete all as specified and as directed |
| 137 | S&F as in repairs kitchen sinks with drainage board made of stainless steel 1mm thick kitchen or laboratory with plugs, washers and wastes, including bedding in cement mortar on to dwarf wall or including fixing cantilever brackets and connecting union to pipe, overall size 915mm X 460mm, bowl size 410 mm X 330mm X 160mm etc complete all as specified and as directed. |
| 138 | S&F in repairs Stainless steel kitchen plate rack of approved make like Prayag of CAT No- P-340 or Equivalent, Overall size( in inches) not less than 31x24x10 complete all as specified. |
| 139 | Supply and fix as in repair Health faucet (ABS Body) mild steel chromium plated suitable for 15 mm dia pipe with 1.25 metre long flexible tube and ABS wall hook including making connections and fixed in position complete in all respect as specified |
| 140 | S&F 110mm dia PVC (SWR) pipes single socketed, in any length, laid in trenches or in floors / fixed to walls complete all as specified. |
| 141 | S&F 75mm dia PVC (SWR) pipes single socketed, in any length fixed to walls / floors or in trenches complete all as specified. |
| 142 | Supply & Fixed in repairs PVC (SWR) bends 110 mm bore any radius complete all as specified. |
| 143 | Supply & Fixed in repairs PVC (SWR) bends 75 mm bore any radius complete all as specified. |
| 144 | Supply & Fixed in repairs PVC (SWR) vent cowl 110 mm complete all as specified. |
| 145 | Supply & Fixed in repairs PVC (SWR) vent cowl 75 mm complete all as specified. |
| 146 | Supply & Fixed in repairs PVC (SWR) junction single , ( single T) 110 mm bore equal or unequal complete all as specified. |
| 147 | Supply & Fixed in repairs PVC (SWR) PVC (SWR) reducers 110 mm to 75mm bore equal or unequal complete all as specified. |
| 148 | Supply & Fixed in repairs PVC (SWR) floor trap 75 mm outlet diameter, plain with grating including jointing with solvent cement complete all as specified. |
| 149 | S&F 15mm bore steel water tubing, medium grade, galvanised with screwed and socketed joints, in any length, including supply and fixing all fittings, ISI marked conforming to IS -1239 and fixed to walls or laid in floors / trenches required for water connections complete all as specified and as directed of the following bores: |
| 150 | S&F 20mm bore steel water tubing, medium grade, galvanised with screwed and socketed joints, in any length, including supply and fixing all fittings, ISI marked conforming to IS -1239 and fixed to walls or laid in floors / trenches required for water connections complete all as specified and as directed of the following bores: |
| 151 | Fixing only 15mm bore steel water tubing, medium grade, galvanised with screwed and socketed joints, including supply and fixing all fittings, ISI marked conforming to IS-1239 and fixed to walls or laid in floors / trenches required for water connections complete all as specified and as directed for the following bores:Note: Serviceable tubings obtained from dismantling herein before will be reused under this item |
| 152 | Fixing only 20mm bore steel water tubing, medium grade, galvanised with screwed and socketed joints, including supply and fixing all fittings, ISI marked conforming to IS-1239 and fixed to walls or laid in floors / trenches required for water connections complete all as specified and as directed for the following bores:Note: Serviceable tubings obtained from dismantling herein before will be reused under this item |
| 153 | M & L for Cutting chases, pinning in brick walls and making good to facings where required and pointing in cement mortar 1:3 to ends or edges of landings, steps, cills, sunshades, shelves, lintels, etc. and cutting chases for concealed water tubing or concealed conduit wiring, etc., and making good, cutting not exceeding 10cm in girth complete all as specified and as directed. |
| 154 | Supply and fix in repair 20 mm dia Ball valves (Minimum weight of valve 210 gms) high pressure of PTMT with epoxy coated Aluminium rod and high density plastic ball screwed for iron pipe with including necessary tank lid all as specified. |
| 155 | S & F in reparis PVC ball valve 25mm dia high pressure of PTMT with aluminium rod & high density plastic ball screwed for iron pipe with including necessary tank lid all as specified. |
| 156 | Supply and fix as in repair 20 mm bore dia, Gun-metal, gate valves, with iron wheel head, screwed both ends on G1 pipes with GI union fixed in existing/ new location including removing old unserviceable ones complete all as specified and directed. |
| 157 | M & L for suspended false ceiling using E-grid 2430, 180 GSM (exposed ceiling suspension system ) of grid size 600mmx600 mm with main runner 38 mm x 24 mm and wall angle 24mm x 24mm using 4mm thick High Pressure stean Crude Everest Non Asbestos Fiber Cement plain Board (E-Board Classic) in a grid of GI system duly suspended with 6mm dia GI bar hanger fixed with steel dash fasteners or iron purline from the roof with adjustment clip providing positions for light fixtures,air conditioning diffuser and ducts ,sprinkler ,smoke detectors etc.The main runners to be secured to structural soffits by hanger @ 1220 mm maximum c/c. the last hanger at the end of each main runner should not be placed at more than 450mm from the adjucent wall,Flush fitting 1220 mm cross tee to be interlocked between main runners @ 610mm c/c,so as to form 600mm x 600 mm grid all as specified and directed. Make:Everest Industries Ltd or equivalent as per IS 14862. |
| 158 | Providing & fixing with semi perforated 12mm thick micro tegular edge GRG false ceiling tiles at all heights with GRG (Glass Fibre With Semi With fully Reinforced Gypsum) false ceiling tiles of Size 595 x 595 mm of approved texture, design and patterns having moisture content less than 2%, humidity resistance of 99%, NRC0.50 to 0.75 as per IS false ceiling GRG false ceiling 8225:1987, Noncombustible as per BS 476 (part 4 )-1970 and light reflectance of 85% (minimum) to be laid in true horizontal level suspended on inter-locking metal T-Grid of hot dipped galvanized iron section of 0.33mm thick (galvanized @ 120 grams per sqm including both sides) comprising of mainT runners of size 15 x 32 mm of length 3000mm,cross-T of size 15 x 32mm of length 1200mm and secondary intermediate cross-T of size 15 x 32 mm of length 600mm to form grid module of size 600 x 600mm , suspended from ceiling using galvanized mild steel items (galvanizing @ 80 grams per sqm) i.e 50mm long, 8mm outer diameter M-6 dash fasteners, 6mm dia fully threaded hanger rod upto 1000mm length and Lshape level adjuster of size 85 x 25 x 2mm Galvanised iron perimeter wall angle of size 24 x 24 x 0.40mm of length 3000 mm to be fixed on periphery wall I partition with the help of plastic rawl plugs at 450mm center to center and 40mm long dry wall wood screws. The work shall be carried out as per specifications, drawing and as per directions of the Engineer-in-Charge. |
| 159 | Supply and fixed Solid PVC Wall Lining consisting of 5mm thick Plain colour PVC sheet inclusive of solvent cement and fixing at site on PVC frame as per specifications and drawing complete all as specified and directed. |
| 160 | Supply and fixed 5mm thick PVC sheet fillet of width 35mm for wall paneling inclusive of fixing on to wall to make PVC Frame as per specification and drawing complete all as specified and directed. |
| 161 | M & L for preparation of newly plastered surfaces and applying three coats of white wash on ceiling complete all as specified. |
| 162 | M & L for providing and applying one coat (1mm thick) of wall care putty over plastered surface to prepare the surface even and smooth. |
| 163 | M&L for prepration of new or previously untreated surface and applying two coat of oil bound distemper over a coat of primer on wall complete all as specified and directed. |
| 164 | Material and labour for preparation of new or previously untreated wall surfaces and applying two coats of Cement based Paint over a coat of primer complete all as specified. |
| 165 | Material and labour for complete removal of existing treatment and applying two coat of cement based paint over one coat of primer complete all as specified and directed. |
| 166 | Material and labour for complete removal of existing treatment and applying two coat of oil bound distemper (white or tinted) over a coat of primer on wall complete all as directed. |
| 167 | Material & Labour for preparation of new or previously untreated wall surfaces and applying Two or more coats of 100% Premium acrylic emulsion paint having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance, dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives @ 1.43 litre/ 10 sqm over and including priming coat of exterior primer applied @ 0.90 litre/ 10 sqm over new surfaces complete all as specified. |
| 168 | Material & Labour for Complete removal of existing treatment wall surface and applyin Two or more coats of 100% Premium acrylic emulsion paint having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance, dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives @ 1.43 litre/ 10 sqm over and including priming coat of exterior primer applied @ 0.90 litre/ 10 sqm over new surfaces complete all as specified. |
| 169 | M&L preparation of new steel surfaces of any description over 10cm width or girth not otherwise described and applying two coats of synthetic enamel paint over one coat of red oxide primer complete all as specified and as directed. |
| 170 | M&L preparation of new wood or wood base surface of any description over 10cm width or girth applying two coats of synthetic enameled paint over one coat of pink primer complete all as specified. |
| 171 | M&L preparation of new wood or wood base surface of any description n exe 10cm width or girth applying two coats of synthetic enameled paint over one coat of pink primer complete all as specified. |
| 172 | M&L preparing surfaces of wood and wood base material new or old of any description and girth not otherwise described and treated with creosote oil complete all as specified and directed. |
| 173 | E & M Division Items |
| 174 | Taking down carefully copper/aluminium point wiring (light, fan, buzzer, socket or power) complete including fixture and fittings such as switches, ceiling roses, pendants, regulators, sockets, light fitting etc including removing from site for taking credit and making good to disturbed surface of walls, floors etc as per existing specification complete all as specified and as directed. |
| 175 | Taking down carefully submain wiring including all accessories without disturbing existing wiring fittings fixtures etc and making good to the disturbed surfaces complete all as specified and directed. |
| 176 | M&L for point wiring with PVC insulated cable FRLSH stranded copper conductor 1.5 sqmm (nominal area), two single core, 1100 volts grade, ISI-694 marked in and including heavy duty, PVC casing caping including all accessories etc ISI marked, with PVC surface boxes suitable for fixing switches, sockets and regulators including PVC insulated FRLSH stranded copper conductor 1.5 sqmm (nominal area) single core cable as earth continuity conductor to common earth and connecting to earth dolly complete all as specified and directed One light point controlled by one switch. |
| 177 | M&L for point wiring with PVC insulated cable FRLSH stranded copper conductor 1.5 sqmm (nominal area), two single core, 1100 volts grade, ISI-694 marked in and including heavy duty, PVC casing caping including all accessories etc ISI marked, with PVC surface boxes suitable for fixing switches, sockets and regulators including PVC insulated FRLSH stranded copper conductor 1.5 sqmm (nominal area) single core cable as earth continuity conductor to common earth and connecting to earth dolly complete all as specified and directed One fan point/exhaust fan point controlled by one, one way switch 5 Amp |
| 178 | M&L for point wiring with PVC insulated cable FRLSH stranded copper conductor 1.5 sqmm (nominal area), two single core, 1100 volts grade, ISI-694 marked in and including heavy duty, PVC casing caping including all accessories etc ISI marked, with PVC surface boxes suitable for fixing switches, sockets and regulators including PVC insulated FRLSH stranded copper conductor 1.5 sqmm (nominal area) single core cable as earth continuity conductor to common earth and connecting to earth dolly complete all as specified and directed One 3 pin 5 Amp socket outlet point controlled by one switch on the same board. |
| 179 | M&L for point wiring with PVC insulated cable FRLSH stranded copper conductor 1.5 sqmm (nominal area), two single core, 1100 volts grade, ISI-694 marked in and including heavy duty, PVC casing caping including all accessories etc ISI marked, with PVC surface boxes suitable for fixing switches, sockets and regulators including PVC insulated FRLSH stranded copper conductor 1.5 sqmm (nominal area) single core cable as earth continuity conductor to common earth and connecting to earth dolly complete all as specified and directed One 3 pin 5 Amp socket outlet point controlled by one switch on independent board. |
| 180 | M&L for point wiring with PVC insulated cable FRLSH stranded copper conductor 1.5 sqmm (nominal area), two single core, 1100 volts grade, ISI-694 marked in and including heavy duty, PVC casing caping including all accessories etc ISI marked, with PVC surface boxes suitable for fixing switches, sockets and regulators including PVC insulated FRLSH stranded copper conductor 1.5 sqmm (nominal area) single core cable as earth continuity conductor to common earth and connecting to earth dolly complete all as specified and directed One bell point controlled by one bell switch 5 Amps |
| 181 | M&L for point wiring with PVC insulated cable FRLSH stranded copper conductor 2.5 sqmm (nominal area), two single core, 1100 volts grade, ISI-694 marked in and including heavy duty, PVC casing caping including all accessories etc ISI marked, with PVC surface boxes suitable for fixing switches, sockets and regulators including PVC insulated FRLSH stranded copper conductor 2.5 sqmm (nominal area) single core cable as earth continuity conductor to common earth and connecting to earth dolly complete all as specified and directed for 3 pin, 15 Amp socket outlet, independent, |
| 182 | S&F ceiling rose surface bakelite with three terminals all as specified and directed |
| 183 | S&F switch piano flush type button single pole one way 5 Amps all as specified and directed. |
| 184 | S&F socket outlet 2 in 1, 3 pin 5 Amp flush type all as specified and directed. |
| 185 | S&F switch socket combination 5 in 1, 5/16 Amp flush type with all as specified and directed. |
| 186 | S&F ceiling fan regulator socketed, step type, flush type heavy duty suitable to work on 230 volts Ac supply complete all as specified. |
| 187 | S&F lamp angular holder insulated body with back plate suitable for batten fittings all as specified and directed. |
| 188 | S&F bell push flush type 5 Amps all as specified and directed. |
| 189 | S&F bell electric ding dong type suitable for operation on 230 volt 50 HZ A C supply complete all as specified and as directed |
| 190 | S & F as in repairs Ceiling rose surface bakelite with three terminals without disturbing existing wiring/fittings incl making good disturbed surface of wall/ceiling complete all as specified and directed |
| 191 | S & F as in repairs Switch piano flush type button single pole one way 5 Amps without disturbing existing wiring/fittings incl making good disturbed surface of wall/ceiling complete all as specified and directed |
| 192 | S & F as in repairs Socket outlet 2 in 1, 3 pin 5 Amp flush type without disturbing existing wiring/fittings incl making good disturbed surface of wall/ceiling complete all as specified and directed |
| 193 | S & F as in repairs Switch socket combination 5 in 1, 5/16 Amp flush type without disturbing existing wiring/fittings incl making good disturbed surface of wall/ceiling complete all as specified and directed |
| 194 | S & F as in repairs Ceiling fan regulator socketed, step type, flush type heavy duty suitable to work on 230 volts AC supply without disturbing existing wiring/fittings incl making good disturbed surface of wall/ceiling complete all as specified and directed |
| 195 | S & F as in repairs Lamp angular holder insulated body with back plate suitable for batten fittings without disturbing existing wiring/fittings incl making good disturbed surface of wall/ceiling complete all as specified and directed |
| 196 | S & F as in repairs LED Tube rod 20 watt single side connection without disturbing existing wiring/fittings incl making good disturbed surface of wall/ceiling complete all as specified and directedMake : Cat No. LED20TLCDL of CROMPTON or equivalent make of as per approved list |
| 197 | S & F as in repairs LED batten 20W connecting to ceiling rose without disturbing existing wiring/fittings incl making good disturbed surface of wall/ceiling complete all as specified and directedMake : Cat No. LHEXAPP7UN1W020 of Havells or equivalent make of as per approved list |
| 198 | S & F as in repairs LED batten 10W connecting to ceiling rose without disturbing existing wiring/fittings incl making good disturbed surface of wall/ceiling complete all as specified and directedMake : Cat No. LHEXAPP7UN1W010 of Havells or equivalent make of as per approved list |
| 199 | S & F as in repairs PVC insulation tape 25mm without disturbing existing wiring/fittings incl making good disturbed surface of wall/ceiling complete all as specified and directed |
| 200 | S&F BLDC ceiling fan 1200mm sweep complete with blades, down rods and accessories, 230 V, min air delivery 210 CFM with service value 6.00 BEE 5 star rated & provn of ‘S’ type fan hook including including taking down of old UNSV one and depositing to MES storeyard for keeping in safe custody complete all as specified and directed.Make- Crompton,Bajaj,Usha. |
| 201 | S&F PVC rectangular block 100mm x 100mm and 50mm deep for mounting switches, socket and regulator etc. with 3mm thick plastic laminated sheet cover complete all as specified and directed:- |
| 202 | S&F PVC rectangular block 175mm x 100mm and 50mm deep for mounting switches, socket and regulator etc. with 3mm thick plastic laminated sheet cover complete all as specified and directed:- |
| 203 | S&F PVC rectangular block 200mm x 150mm and 50mm deep for mounting switches, socket and regulator etc. with 3mm thick plastic laminated sheet cover complete all as specified and directed:- |
| 204 | M&L for submain wiring with two single core 4 sqmm PVC insulated unsheathed cable multi-strand copper conductor FRLSH drawn through and including PVC non metallic rigid PVC casing caping with all fittings and fixing accessories on roof, walls, ceiling etc including 1 x 2.5 sqmm PVC insulated unsheathed multi strand copper conductor earth wire FRLS connecting earth including cutting groove for concealed wiring, making good to disturb surface of wall/floor with cement mortar and finishes to match existing complete all as specified and directed. Note: Two run of single core cable, one run earth wire and one run PVC casing caping will be measured as one length. |
| 205 | M&L for submain wiring with two single core 6 sqmm PVC insulated unsheathed cable multi-strand copper conductor FRLSH drawn through and including PVC non metallic rigid PVC casing caping with all fittings and fixing accessories on roof, walls, ceiling etc including 1 x 4 sqmm PVC insulated unsheathed multi strand copper conductor earth wire FRLS connecting earth including cutting groove for concealed wiring, making good to disturb surface of wall/floor with cement mortar and finishes to match existing complete all as specified and directed. Note: Two run of single core cable, one run earth wire and one run PVC casing caping will be measured as one length. |
| 206 | M&L in repair PVC insulated three core 0.75 sqmm size copper conductor multistranded unarmoured cable 1100 Volt grade including taking down of old unserviceable cable complete all as specified and directed. |
| 207 | M&L in repair PVC insulated three core 2.50 sqmm size copper conductor multistranded unarmoured cable 1100 Volt grade including taking down of old unserviceable cable complete all as specified and directed. |
| 208 | S&F wall mounted, compact LED batten 20 watt having 30 mins backup (working as regular 20 watt in normal mode and 4 watt in backup mode) and connecting with three core flexible copper conductor cable of suitable size from ceiling rose complete all as specified and directed. Make : Cat No: LDLL20-BK4-CDL of Crompton or equivalent make of Havells/M/S Jaquar & Company Pvt Ltd. |
| 209 | S&F LED bulb 10 watt, 5 star rated and connecting to lamp holder complete all as specified and directed. Make Cat No: LED 10W 5 Star Lamp of Crompton or equivalent make of Havells/M/S Jaquar & Company Pvt Ltd. |
| 210 | S&F bldg security light, LED luminaire 25 watt IP 66 LED lamp, driver etc with all accessories complete all as specified and directed. Cat No. LSTS-25-CDL/NL-M of Crompton or equivalent make of Havells/M/S Jaquar & Company Pvt Ltd. |
| 211 | S&F plastic body exhaust fan 250mm sweep complete with louvers shutter, voltage 230V, 50 Hz, RPM 1200, copper winding and connecting to ceiling rose with flexible copper cable including making holes on the wall and making good to the disturbed surfaces including taking down of old UNSV one complete all as specified and as directed. |
| 212 | S&F Steel body exhaust fan 300mm sweep complete with louvers shutter, voltage 230V, 50 Hz, RPM 1200, copper winding and connecting to ceiling rose with flexible copper cable including making holes on the wall and making good to the disturbed surfaces including taking down of old UNSV one complete all as specified and as directed. |
| 213 | S&F Steel body exhaust fan 380mm sweep complete with louvers shutter, voltage 230V, 50 Hz, RPM 1200, copper winding and connecting to ceiling rose with flexible copper cable including making holes on the wall and making good to the disturbed surfaces including taking down of old UNSV one complete all as specified and as directed. |
| 214 | S&F sheet metal enclosure powder coated three phase and neutral DB for fixing of MCBs, 4 way double door with bus bar including grouting on the wall by means of screws and rawal plugs and making good disturbed surfaces including taking down of old unsv complete all as specified and directed. |
| 215 | S&F sheet metal enclosure powder coated single phase DB for fixing of MCBs, 8 way double door with bus bar 200 Amp including grouting on the wall by means of screws and rawal plugs and making good disturbed surfaces including taking down of old unsv complete all as specified and directed. |
| 216 | S&F sheet metal enclosure powder coated single phase DB for fixing of MCBs, 4 way double door with bus bar 200 Amp including grouting on the wall by means of screws and rawal plugs and making good disturbed surfaces including taking down of old unsv complete all as specified and directed. |
| 217 | S&F Sheet metal plug socket with MCB SP 20 Amp, 240 V enclosure for AC/equipment with neutral and earth point complete all as specified and directed. |
| 218 | S&F MCB SP of capacity 5-32 Amps, 240 V, 10 KA 'C' curve complete all as specified and directed. |
| 219 | S&F MCB SPN of capacity 40-63 Amps, 240 V, 10 KA 'C' curve complete all as specified and directed. |
| 220 | S&F MCB TPN of capacity 63 Amps 4 pole, 240 V, 10 KA 'B' curve complete all as specified and directed. |
| 221 | S&F 1100 Volts grade heavy duty cable PVC insulated aluminium multi stranded conductor of size 6 sqmm, served with inner sheating of PVC tape and overall PVC sheathed in service connections suspended by insulating hanges not more than 1 meter apart including 4mm suspension wire, two twin core cable flat or circular including taking down old U/s service connection complete all as specified and directed. |
| 222 | S&F 1100 Volts grade heavy duty cable PVC insulated aluminium multi stranded conductor of size 10 sqmm, served with inner sheating of PVC tape and overall PVC sheathed in service connections suspended by insulating hanges not more than 1 meter apart including 4mm suspension wire, two twin core cable flat or circular including taking down old U/s service connection complete all as specified and directed. |
| 223 | S&F 1100 Volts grade heavy duty cable PVC insulated aluminium multi stranded conductor of size 16 sqmm, served with inner sheating of PVC tape and overall PVC sheathed in service connections suspended by insulating hanges not more than 1 meter apart including 4mm suspension wire, two twin core cable flat or circular including taking down old U/s service connection complete all as specified and directed. |
| 224 | Taking out existing unsv old earthing and M&L for new for earthing with galvanised steel earth plate electrode 600mm X 600mm X 6mm thick burried directly in ground (earth pit not less than 2.25 mtr below ground level) with top edge of the plate not less than 1.5 mtr below ground level connected to 4mm dia GI wire protected by 20 mm bore light grade galvanised iron pipe and other end connected to test point as directed including funnel with wire mesh and watering pipe 20 mm bore medium grade galvanised iron pipe with charcoal and common salt in alternaterlayers of 15 cm thickness all around the GI plate electrode with concrete pit in PCC 1:3:6 type C-1 with cast iron frame including cast iron cover 10mm thick hinged to CI frame and 6mm MS rod for handle, necessary excavation and earth wok in hard/dense soil and disposal of spoil to a distance n exc 50 m and necessary testing complete all as shown in electrical plate No 3 of SSR part-I complete all as specified and directed. Please Enable Macros to View BoQ information |
| SR No | FileName | File Description |
| 1 | Click here to download tender document | Tender Documents |
| 2 | Click here to download tender document | Tender Documents |
| 3 | Click here to download tender document | Tender Documents |
| 4 | Click here to download tender document | Tender Documents |
| 5 | Click here to download tender document | Tender Documents |
We are a group of professionals specializing in custom software development, web development, mobile app development, IOT base solutions, web design, graphics & Enterprise solutions provid.
Copyright © 2026 · All Rights Reserved. Terms of Usage | Privacy Policy
For Tender Information Services Visit : TenderDetail
