Sales : +91-777 804 8217
| Sl. No. | Item Description |
| 1 | Taking down cement or cement lime plaster/Pointing on stone/brick wall, ceiling incl. Raking out joints, hacking for key, scrubbing down with water etc complete all as specified and directed. |
| 2 | M & L for rendering in cement mortar (1:6), 15mm thick on stone/Brick masonary surfaces finished fair and even complete all as specified and directed. |
| 3 | M & L 15mm thick rendering in cement mortar (1:4) mixed with water proofing compound @3% by weight of cement on fair faces of Stone/brick work or concrete surfaces, finished even and smooth etc complete all as specified and directed.Note:-WPC measured and paid separately. |
| 4 | M & L for internal wall complete removal of existing treatment of old plastered surfaces of wall for waterproof cement based putty @ 1 Kg(undiluted) per sq mtr. of average thickness 1 mm over the old painted wall after scrapping to prepare the surface even and smooth complete and sanding of the putty surface with mechanical wall sander having mechanical vacuum mechanism with RPM not less than 1500, sanding pad of 240 Grit or above to make the surface free from dust etc. by skilled labour as per following steps complete all as specified and directed:- (a) Mix the putty powder by adding water as per manufacturer instructions and mix it with putty mixer with the mixing capacity of min 2.50 kg putty per minute.(b) Apply the first coat the prepared mixer with the help of fully automatic airless spray machine of putty application having flow speed of max 6 ltrs per minutes with a maximum pressure 3300 PSI.(c) Allow 6-8 hrs time to dry the putty surface. |
| 5 | M & L for internal wall after Item No-04 one coat of acrylic water based interior grade primer on wall surfaces @ 0.8 ltr(undiluted)/10 sq mtrs diluted with water in 1:1 ratio to be applied with fully automatic airless spray machine of paint application with a flow speed of min 1 ltr per minute having a pressure of 3300 PSI. Allow 6-8 hrs to dry the surface for painting of subbsequent coats complete all as specified and directed. |
| 6 | M & L for internal wall after Item No-04 & 05, two coats of 1st quality acrylic distemper (ready mixed) on wall surface having VOC content less than 50 gms/litre, of approved manufacturer, of required shade and colour complete, as per manufacturer's specification, complete all as specified and directed. |
| 7 | M & L for internal wall preparation of new plastered surfaces of wall for waterproof cement based putty @ 1 Kg(undiluted) per sq mtr. of average thickness 1 mm over the new plastered painted wall after scrapping to prepare the surface even and smooth complete and sanding of the putty surface with mechanical wall sander having mechanical vacuum mechanism with RPM not less than 1500, sanding pad of 240 Grit or above to make the surface free from dust etc. by skilled labour as per following steps complete all as specified and directed:- (a) Mix the putty powder by adding water as per manufacturer instructions and mix it with putty mixer with the mixing capacity of min 2.5 kg putty per minute.(b) Apply the first coat the prepared mixer with the help of fully automatic airless spray machine of putty application having flow speed of max 6 ltrs per minutes with a maximum pressure 3300 PSI.(c) Allow 6-8 hrs time to dry the putty surface. |
| 8 | M & L for internal wall after Item No-07, one coat of acrylic water based interior grade primer on wall surfaces @ 0.8 ltr(undiluted)/10 sq mtrs diluted with water in 1:1 ratio to be applied with fully automatic airless spray machine of paint application with a flow speed of min 1 ltr per minute having a pressure of 3300 PSI. Allow 6-8 hrs to dry the surface for painting of subbsequent coats complete all as specified and directed. |
| 9 | M & L for internal wall after Item No-07 & 08, two coats of 1st quality acrylic distemper (ready mixed) on wall surface having VOC content less than 50 gms/litre, of approved manufacturer, of required shade and colour complete, as per manufacturer's specification, complete all as specified and directed. |
| 10 | M & L for external wall new plastered surfaces, one coat of acrylic water based exterior grade primer on wall surfaces @0.9 ltr(undiluted)/10 Sqm diluted with water in 1:1 ratio to be applied with fully automatic airless spray machine of paint application with a flow speed of min 1 ltr per minute having a pressure of 3300 PSI. Allow 6-8 hrs to dry the surface for painting of subsequent coats complete all as specified and directed. |
| 11 | M & L for external wall after Item No 10.00, applying two coats of 100% Premium acrylic emulsion paint on wall surfaces having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, Alkali & ungal resistance, dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives @ 1.43 litre/ 10 sqm, Allow 6-8 hrs to dry the surface in subsequent coats of paint complete all as specified and directed.Make :- Apex Ultima Protek Asian paints/ Nerolac excel top guard / Berger |
| 12 | M & L for preparation of old wooden surfaces of any description over 10cm width or girth and applying one coat of synthetic enamel paint, complete, all as specified and directed. |
| 13 | M & L for preparation of new wooden surfaces of any description over 10cm width or girth and applying two coat of synthetic enamel paint, over 1 coat of primer complete, all as specified and directed. |
| 14 | M & L for preparation of old iron and steel surfaces of any shape and size over 10cm width or girth and applying one coat of synthetic enamel paint complete all as specified and directed. |
| 15 | M & L for new iron two coats of synthetic enamel paint over a priming coat of red oxide after preparation of new surfaces of any description, over 10cm in width or girth, not otherwise described complete all as specified and directed. |
| 16 | Demolition of Stone slabs and tiles laid bedded and jointed in any mortar of any description or thickness in floors, aprons etc. complete all as specified and directed. |
| 17 | Dismantling floor, hearth or wall tiles, including cement mortar, removing serviceable tiles from site & rubbish off the premises, complete all as specified and directed. |
| 18 | M & L for vitrified ceramic tiles light shade 8-10mm thick (square / rectangular ) polished, area of each tiles exc 0.18 Sqm not exceeding 0.36 Sqm, in floor etc set and jointed in neat cment slurry and pointed in white or coloured cement to match including screed bed 15mm thick in CM 1:6 complete all as specified and directed. |
| 19 | M & L for vitrified ceramic tiles light shade 8-10mm thick (square / rectangular ) polished, area of each tiles exc 0.18 Sqm not exceeding 0.36 sqm, in vertical surfaces such as skirting, dados etc set and jointed in neat cement slurry and pointed in white or coloured cement to match including screed plaster 10mm thick in CM 1:4 complete all as specified and directed. |
| 20 | M & L for machine cut Kota stone slab flooring 20-25mm thick over 15mm thick screed bed in CM 1:6, laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing complete all as specified and directed. |
| 21 | M & L for Kota stone slab 20-25mm thick in riser of steps, skirting, dado and pillar laid over cement screed 10mm thick in CM (1:4) & jointed with grey cement slurry mixed with pigment to match the smooth of the slab incl rubbing & polishing complete all as specified and directed. |
| 22 | M & L for Non-skid Ceramic tiles 7 to 8 mm thick ( square /Rectangular) area of each tile exceeding 0.11 sqm but not exc 0.18 sqm in floors etc set and jointed in neat cement slurry and pointed in white or coloured in white or coloured cement to match with tile laid over and including screed bed or bedding layer of 15 mm thick in CM (1:6) complete all as specified and directed. |
| 23 | M & L glazed ceramic coloured tiles, size 450 mm X 300 mm, 6-7 mm thick on vertical surfaces of wall such as dados, skirting etc set & jointed in neat slurry and pointed in white or colour cement to match over 10 mm thick screed plaster in CM 1:4 complete all as specified and directed |
| 24 | M & L Outdoor paving tiles of area of each tiles exceeding 0.08 sqm but not exceeding 0.36 sqm, scratch resistant, stain resistant, impact resistant & acid/alkali resistant , to withstand heavy loads and neutral to sun up effect, complete all as specified and as directed.( Make - Johnson,Somany,kajaria and equivalent |
| 25 | M & L for 18-20mm thick black granite on kitchen platform, window cill, Jambs, soffit, vanity counters and similar work over & including 15mm thick screed bed in CM 1:6 laid over sand stone slab machine cut, bedded and jointed with grey cement slurry and pointed with white cement with admixture of pigment to match the shade of granite stone including cutting, moulding and polishing complete all as specified and directed. |
| 26 | Demolition of cement concrete (unreinforced ) in floors and pavings n. exc 15cm thickness (above or below GL) complete all as specified and directed |
| 27 | M & L for 25mm thick PCC 1:2:4 type B-1 (using 20 mm thick crushed stone aggregate) as in sub base complete all as specified and directed. |
| 28 | M & L cement concrete type D-2, 1:4:8 (40 mm graded aggregate), 100 mm thick, complete all as specified and directed. |
| 29 | M & L PCC (1:3:6) type C-1 using 20mm graded stone aggregate 50mm thick as in plinth protection finished fair even laid in alternate bays n.exc 2m in length complete all as specified and directed. |
| 30 | M & L for PCC inter locking tile 60 mm thick ,coloured, reflective type, of approved quality, M-35 Grade with grey cement and pigment including 25mm thick sand cushioning duly watering of consolidation complete all as specified and directed. |
| 31 | Dismantling timber scantlings 40 Sqmm and over in section, in any position in unframed work, complete all as specified and directed. |
| 32 | Dismantling structural steel work including doors gates but excluding framed truss etc complete all as specified and directed |
| 33 | S & F for Mild steel pipes/ rolled sections Fe 410 -W (Gde- E- 250) quality- A as in framing for cladding, rafters, purlins, angle fixed with angle cleats or other connecting plates complete all as specified and directed. |
| 34 | M & L pre-painted galvalume aluminium zinc coated GI based corrugated manglore pattern steel sheet 0.50 mm thick of an colour having tensile strength og 550 Mpa as in roof covering/cladding/ridge to wall, fixed with self tapping screws including dismantling of old sheet any type complete all as specified and directed. |
| 35 | M & L pre-painted galvalume aluminium zinc coated GI based Ridge corrugated manglore pattern steel sheet to fix with corrugation 0.50 mm thick of an colour having tensile strength of 550 Mpa as in roof covering/ cladding/ ridge to wall, fixed with self tapping screws including dismantling of old sheet any type complete all as specified and directed. |
| 36 | Dismantling Wall and ceiling boards/wall panelling (fibre, pulp, insulation, etc.) or insulation boards/slabs/ blankets, any thickness, including cover fillets complete all as specified and as directed |
| 37 | Providing & Fixing false ceiling with Everest Fibre Cement Designer tile Ivory painted (High Pressure Steam Cured) of 4mm thickness (as per IS:14862) of size 595x595 mm and any one of the design (oceanic, lake & hill, cascade or electra) in true horizontal level, suspended on inter locking metal grid of hot dipped galvanized steel sections (galvanized @ 120 gms, both side inclusive) consisting of main \\"T\\" runner with suitably spaced joints to get required length and 15x32 mm made from 0.30 mm thick sheet, spaced at 1200 mm c/c and cross \\"T\\" of size 15x32 mm made of 0.30 mm sheet, 1200mm long spaced between main \\"T\\" at 600 mm c/c to form a grid of 1200x600 mm and secondary cross \\"T\\" of length 600 mm and size15x32 mm made of 0.30 mm thick sheet to be interlocked at middle of the 1200x600 mm panel to form grids of 600x600 mm and wall angle of size 15x20 mm made of 0.30 mm thick sheet and laying false ceiling tiles in the grid including , required cutting/making, opening for services like diffusers, grills, light fittings, fixtures, smoke detectors etc. Main \\"T\\" runners to be suspended from ceiling using GI soffit cleats fixed to existing RCC lintel with dash fasteners, GI adjustable rods of 3mm dia with galvanised Butterfly level clips, spaced at 1200 mm c/c along main T, bottom exposed width of 15mm of all T -sections shall be centra black pre-painted with polyester paint, and having a load bearing capacity of 12 kg/sqm, including dismantling of old boards/ ciling etc complete all as specified and directed. |
| 38 | S & F for 5mm thick PVC sheet fillet of width 35mm for wall panelling inclusive of fixing on to wall to make PVC frame complete all as specified and directed. |
| 39 | S & F for solid PVC wall Lining/wall panelling consisting of 5mm thick Plain colour PVC sheet inclusive of solvent cement and fixing at site on PVC frame as per specifications complete all as specified and directed. |
| 40 | Demolition of stone/ brick masonry built in cement or cement lime mortar as in portion ordered complete all as specified and directed. |
| 41 | M & L for walling Random rubble masonary uncoursed well bonded bedded and solidly hearted and built in cement mortar 1:6 etc complete all as specified and directed. |
| 42 | M & L for walling Random rubble masonary (but except stone) uncoursed well bonded bedded and solidly hearted and built in cement mortar 1:6 etc complete all as specified and directed. |
| 43 | M & L for brick work with sub class 'B' bricks straight or curved on plan exc 6m mean radius, built in CM 1:6 complete all as specified and directed. |
| 44 | Extra over stone walling for hammer dressing to face stones and dressing of face beds and joints, hammer dressing with maximum depression on face from straight edge held against the dressed surface n. exc 20mm complete all as specified and directed. |
| 45 | M & L Brick work using old size bricks with sub class 'B' bricks straight or curved on plan to any radius in half brick thick walls built in cement mortar 1:4 complete all as specified and directed. |
| 46 | S & F for in fancy type ( Vitreous Ceramic EWC ) along with one piece EWC's with seat cover and twin flush fittings ( snow white or ivory or colour as approved by GE ) with Soft Close Seat Cover and Twin Flush Fittings 700 x 430 x 770 mm of flush tank with all necessary fittings with fixing arrangements and connecting to water pipe and WC etc in cluding P or S trap fitting and fixed in repairs complete all as specified and directed.Make : Cera New Cat Name :CERA -CLANG OR CARTIN /CADMUS/ CARR/CORIUM OR Equallent make and model approved by GE |
| 47 | S & F for in fancy type (Vitreous Ceramic ivory or snow white) pedestal patten wall hung wash basins with full pedestal of size 615x510mm ( cat no CERA S 2040122) & pedestal ( S 2090107) complete set to fixied wall with all necessary fittings with fixing arrangements and connecting to water pipe with existing water system etc including suitable pillar Mixer long body tap (CERA MODEL F1015101 or Equallent Suitable model & make approved by Engineer in Charge ) complete all as specified and directed .Make : Cera New Cat Name :CERA -CANTON/CAILA/ OR Equallent make and model approved by GE |
| 48 | S & F for in repairs Table top wash basin with 32 mm C.P. brass waste coupling (Model No ALD-709 of Jaquar or similar),OR Equallent with 15 mm nominal bore CP Single Lever Basin Mixer with pop up waste & 450 mm long braided Hoses(Model: no LYR-38051B of Jaquar or similar) make and model approved by GE. including cutting and making good the walls wherever require complete all as specified and directed. |
| 49 | Taking down chowkhats or frames with shutters (without taking off shutters from the frames) n exc 1.50 sqm each and removing from site complete all as spd & directed and making good disturbed surface of walls in cement mortar (1:3) complete all as specified and directed. |
| 50 | Taking down chowkhats or frames with shutters (without taking off shutters from the frames) exc 1.50 sqm and n.exc 4.00 Sqm each and removing from site complete and making good disturbed surfaces of wall in CM (1:3) complete all as specified and directed. |
| 51 | M & L for aluminium powder coated door frame and shutter including top, bottom/middle rail using glazing clip including rubber head and float glass 6mm thick tinted provided with one floor spring hydraulically regulated made up of minimum 1.25mm thick aluminium alloy sheet foundation box main body with stainless steel cover governing pivot made of brass other parts made of mild steel heavy duty fixed to aluminium door and other fittings like handle, locking system, push plate and necessary beading all around the door shutter frame as required for resistance complete all as specified and directed and as per Chief Engineer Drg |
| 52 | M & L for aluminium powder coated sliding window, ventilator three track (2 Glass and 1 Wiremesh) sliding shutter 5mm thick tinted float glasses, necessary aluminium beadings fittings and other panels to prevent air from out side complete all as specified and directed and as per Chief Engineer Drg |
| 53 | S & F for in repair aluminium grill with and including suitable aluminium anodised frame F/H section as requird as per design No DG- 104 or equivatent 6.5 mm thick all as specified and as directed. |
| 54 | S & F for Pressed steel door frame of size 125 x 60mm for doors with one or more rebates incl necessary fixing lugs hinges, lock strike plate, hold fasts etc. complete all as specified. The rates include for one shop coat of priming and filling with PCC 1:3:6. complete all as specified and directed. |
| 55 | S & F for Second class HW, plain, solid, straight chowkhats & frames including melamine polish , wrought, framed, rebated on the solid, rounded or chamfered, put together glue pinned at joints complete all as specified and directed. |
| 56 | S & F for IInd class HW Flush shutters 30mm thick, solid core construction, with block board core and plywood face panels commercial type on both side and both facesis covered with approved pattern with Decorative coloured laminate type 1 of 0.9 mm thick and all around side faces covered with 10mm thick 1st class hard wood liping duly polished complete all as per specified and directed. |
| 57 | S & F for IInd class HW, 35mm thick, glazed and skeleton shutters, open rebated and prepared to receive glass, gauze, etc divided into squares, with plain, chamfered or ounded, mitred and rebated sash bars, fitted with cut and mitred beads for securing glass etc, sizes of members shutters as specified in SSR Part I, selection 8, clause 8.24 (a), supplied and fitted to chowkhats complete all as specified and directed. |
| 58 | S & F for 300mm long body, Modern designer Chormium Plated sliding door bolt with hasp and staple (bolt type) and fixing clips, complete all as specified and directed. |
| 59 | S & F for 300mm ordinary Mild steel rat tail rod pattern Modern designer Chormium Plated springs including roller and roller plate complete all as specified and directed. |
| 60 | S & F for in repairs 150mm long dual leg floor door stopper of alumunium alloy body and tongue anodised with hard drawn steel spring fixing on door, complete all as specified and directed. |
| 61 | S & F for in Solid PVC moulded Door Frame of size 50mm x 47mm made out of 5mm plain colour PVC sheet reinforced with M.S. Square tube, suppling & fixing in opening as per specification & drawing using single side prelam PVC sheet used instead of Plain colour PVC sheet & edges will be painted to match with prelam sheet, reinforced with MS square tube and fixing in opening as specification & drawing complete all as specified and directed. |
| 62 | S & F for factory made solid PVC moulded door shutter with wood free EPS, 28 to 30mm thick, (styles) with 2,4 or 6 raised panel design with 2mm thick moulded prelam (Nut Brown colour) PVC sheet on the front face & 2mm prelam (Nut Brown colur ) PVC sheet on back face, and fixing inthe frame at site as per specification and drawing on page 161 of SSR (Part -II ) 2020 complete all as specified and directed. |
| 63 | S & F for 200mm long Brass barrel tower bolts Modern designer Chormium Plated, with cast or sheet barrel and rolled or cast bolts and fixed of extruded section complete all as specified and directed. |
| 64 | S & F for 150mm long extruded brass handles Modern designer Chormium Plated,fabricated type polished complete all as specified and directed. |
| 65 | S & F for 100mm butt hinges extruded aluminium alloy with galvanised mild steel hinge and anodised ISI marked and fixed, complete all as specified and directed. |
| 66 | S & F for in repair Deco door seal size 1.5\\" width door bottom sealing strip draft Excluder stopper with aluminium plate & nylon bristles for weather stripping complete all as specified and directed. |
| 67 | S & F for stainless steel wire cloth, 0.36mm nominal dia of wire and average width of apertature 1.40mm and fixed with tinned tacks or stainless steel wire staples all as specified and directed. |
| 68 | S & F for in repairs 25mm dia ss curtain rod and decorative type knobs and required curtain rod bracket with chromium plated U shaped support clamp suitable for 25mm dia rod complete all as specified and directed. |
| 69 | Taking down old unserviceable 15mm GI tubing, fittings and connections and removing from site or keeping aside for refixing complete all as specified and directed. |
| 70 | Taking down old unserviceable 20mm GI tubing, fittings and connections and removing from site or keeping aside for refixing complete all as specified and directed. |
| 71 | Taking down old unserviceable 25mm GI tubing, fittings and connections and removing from site or keeping aside for refixing complete all as specified and directed. |
| 72 | S & F for 15mm GI water tubing( Concealed type), medium grade, galvanised with all fittings (and fixed to walls, ceiling or laid in floors/ trenches complete all as specified and directed. |
| 73 | S & F for 20mm GI water tubing, medium grade, galvanised with all fittings (and fixed to walls, ceiling or laid in floors/ trenches complete all as specified and directed. |
| 74 | S & F for 25mm GI water tubing, medium grade, galvanised with all fittings (and fixed to walls, ceiling or laid in floors/ trenches complete all as specified and directed. |
| 75 | S & F for in repair tubular towel rail brass chromium plated 20mm dia 'D' type 60cm long, complete all as specified and directed.Make: Prima (Cat No.PSS-4503-A) or equivalent as approved by GE. |
| 76 | S & F for in repair towel ring brass chromium plated, complete all as specified and directed.Make: Prima (Cat No.PSS-4503-B) or equivalent as approved by GE. |
| 77 | S & F for in repair Paper Holder brass chromium plated, complete all as specified and directed.Make: Prima (Cat No.PSS-4503-F) or equivalent as approved by GE. |
| 78 | S & F for in repair CP Amaze square shower with arm (8'' x 8'') complete all as specified and directed. Make : Prima (Cat No. PSH-4432) or equivalent as approved by GE. |
| 79 | S & F for in repair PVC Multi utility Mirror cabinet , complete all as specified and directed.Make : Prima (Cat No. PCD-1631) or equivalent as approved by GE. |
| 80 | S & F for in repair Glass corner shelf 300mm with brass brackets, complete all as specified and directed.Make : Prima (Cat No. PGS-3207) or equivalent as approved by GE. |
| 81 | S & F for in repair health faucet cast copper alloy chromium plated with flexible chrome hose and wall hooks complete all as specified and directed.(Make Prima PHF-4302) or equivalent as approved by GE. |
| 82 | S & F for in cast copper alloy chromium plated bottle trap fixed to WHB and wall complete all as specified and directed. Make Parryware T3201A1 or equivalent as approved by GE. |
| 83 | S & F for in Rectangular LED Wall Mirror with Touch Sensor, 3 Light Modes & Backlit Illumination | Framed Bathroom & Bedroom Mirror, Wall Mounted (18x24 Inch) with frame, with chromium plated brass screws and cup washers fixed to wall complete all as specified and directed. |
| 84 | S & F for in CasaGold 36 Inch Golden Round Mirror in Steel Frame looking mirror with chromium plated brass screws and cup washers fixed to wall complete all as specified and directed. |
| 85 | S & F for in repair Soap dish fancy type, fixed to plugs with chromium plated brass screws embedded in the wall complete all as specified and directed.Make : Prayag (Cat No. BA-15) or equivalent as approved by GE. |
| 86 | S & F for in repair PVC connection, heavy duty 15mm bore, 60cm long with 2 Nos PTMT nuts of approved quality complete all as specified and directed. |
| 87 | S & F for in repair, 15mm bore Brass CP basin mixer for mixing hot & cold water for wash basin screwed down for iron pipe and fixed cocomplete all as specified and directed.Make : Prima (Cat No. PSL-5812) or equivalent as approved by GE. |
| 88 | S & F for in repairs 15mm bore cast copper alloy chromium plated fancy bib tap long body , screwed for iron pipe complete all as specified and directed.Make : Prima (Cat No. PME-6002) or equivalent as approved by GE. |
| 89 | S & F for in repair fancy type angle valves 15mm bore, cast copper alloy chromium plated, screwed down high pressure screwed both ends for iron pipe or for unions and fixed etc complete all as specified and directed. |
| 90 | S & F for in mild steel framed work such as grills, grating cooler stands, water tank staging door chokhat etc, with ends of bars shouldered and / or riveted, or forged into spikes, framed guard bars, barred iron doors, ladders, framed balusters, walk ways, railing, frame work of water tanks and similar work conforming to Fe 290 Gde E-165 complete all as specified and directed. |
| 91 | S & F for 110mm PVC (SWR) pipes single socketed in any length with rubber joints fixed to wall or laid in floors / trenches with & including existing / new MS stack clamps of FI 50 x 3mm including taking down old pipe line any type any size complete all as specified and directed. |
| 92 | S & F for 75mm PVC (SWR) pipes single socketed in any length with rubber joints fixed to wall or laid in floors / trenches with & including existing / new MS stack clamps of FI 50 x 3mm including taking down old pipe line any type any size complete all as specified and directed. |
| 93 | S & F for 110mm bore PVC (SWR) bend / shoe of any radius with access door, complete all as specified and directed. |
| 94 | S & F for 75mm bore PVC (SWR) bend / shoe of any radius with access door, complete all as specified and directed. |
| 95 | S & F for in repairs PVC (SWR) floor trap/ Nahani trap 75mm, plain with grating including jointing to waste pipe fixed in cement concrete type (1:2:4) complete all as specified and directed. |
| 96 | S & F for in repairs 110mm bore PVC (SWR) vent cowl complete all as specified and direted. |
| 97 | Demolition and bracking up drain pipe SWG line set in CM of description, 150mm dia including side packing / haunching complete all as specified and directed.` |
| 98 | M & L for PCC 1:3:6 type C-2 using 40mm graded aggregate for bed concrete to drain pipe packing under hunching for sides for 150mm dia SWG pipe lines complete all as specified and directed. |
| 99 | M & L for 150mm dia in bore Reinforced concrete pipes, class NP 2 with one collar per length of pipe laid in trenches and jointed complete all as specified and directed. |
| 100 | M & L for concrete bed to drain pipes including packing under and haunching against the sides of pipe they are laid with PCC 1:4:8 type D-2 for pipe of 150mm dia in bore complete all as specified and directed. |
| 101 | Cutting into existing manholes for removing existing branch drain, making good to pipe and rendering cutting out branch channel, and making good benchings for 150 mm bore pipe complete all as specified and directed. |
| 102 | Dismantling of existing unserviceable RCC/PVC water tank and S & F for 500 litre capacity rotational moulded polythene water storage tanks double layer (cylindrical vertical with closed top) hoisted & fixed in position complete all as specified and directed. |
| 103 | Dismantling of existing unserviceable RCC/PVC water tank and S & F for 1000 litre capacity rotational moulded polythene water storage tanks double layer (cylindrical vertical with closed top) hoisted & fixed in position complete all as specified and directed. |
| 104 | S & F for ball valves PTMT high pressure with epoxy coated aluminium rod and high density plastic ball, screwed for iron pipe, 20mm bore compete (Minimum weight 210 gm) complete all as specified and directed. |
| 105 | S & F for in repairs gun metal globe or gate valve, wheel head cast copper alloy screwed down light pressure with crutch or butterfly handle screwed both ends for iron pipe or for union 20 mm dia, ISI marked complete all as specified and directed. |
| 106 | M & L in repair precast cement concrete louvers and jallies 35 mm thick made in Mix 1:2:4 type B0 using 12.5mm graded stone aggregate set in cement mortar 1:4 and jallies design as per site requirement complete all as specified and directed. |
| 107 | Providing and fixing 12 mm thick frameless toughened glass partition of approved brand and manufacture, including providing and fixing partition at top & bottom with aluminium channel etc all complete all as specified and directed. |
| 108 | Fabrication & fitting of kitchen with cabinet/shelves & wardrobe/cupboard made out of 18mm thick (one side decorative lamination & other side balncing lamination) PVC sheet with piano hinges including providing cabinet for keeping baskets / cutlery baskket with handles/door shutters complete all as specified and directed. Note :- PVC sheet, fitting & fixture will be measured and paid separately as supply only. |
| 109 | Supply only in repairs 18mm thick (one side decorative lamination & other side baancing lamination) solid PVC board with cement solvent adhesive for shutter/kitchen cabinet / cup board/partition wall/ wall cabinet complete all as specified and directed. Make :- Raj shree or equivalent as approved by GE. |
| 110 | S & F for 30mm Continuous (piano) hinges, Stainless steel, bright finish or electrogalvanised complete all as specified and directed. |
| 111 | Supply only 125 mm dia oval shape brass handle fancy type bright finish complete all as specified and directed. |
| 112 | Supply only in repair stainless steel basket (plain) of approved quality of size 520 X 485 X 100mm complete all as spepcified and directed. Make :- Godrej SS or equivalent as approved by GE. |
| 113 | Supply only in repair stainless steel plate basket of approved quality of size 520 X 485 X 150mm complete all as spepcified and directed. Make :- Godrej SS or equivalent as approved by GE. |
| 114 | S & F for PVC body magnetic door catches with striking plate complete all as per sample held with GE office(sample Room) etc complete all as specified and directed. |
| 115 | S & F for basket / trolly channel 50cm long extruded MS galvanised over roller complete all as spepcified and directed. |
| 116 | Taking down carefully copper/aluminium point wiring (light, fan, socket or power) complete, including fittings such as switches, ceiling roses, holders, regulators, sockets etc., removing materials from site and making good disturbed surface of walls, floors etc complete all as spepcified and directed. |
| 117 | M&L for point wiring with 1.5 Sqmm. (nominal area) single core PVC insulated 1100 Volts, grade multi stranded FRLS copper conductor unsheathed cable in and including PVC rigid non metallic conduit medium grade not less than 20mm dia ISI marked and fittings and accessories concealed in walls/roof/ ceiling with suitable size of sunk type pressed steel modular terminal box and modular white cover plate with frame of suitable module as per site requirements for mounting of modular switches, sockets, fan regulator etc and one green colour cable of 1.5 Sqmm. (nominal area) single core PVC insulated 1100 Volts, grade multi stranded FRLS copper conductor unsheathed as earth wire up to common earth and connected to earth for the following, complete all as specified and directed: |
| 118 | One light point/bell point/ceiling fan/exhaust fan point controlled by one way 5 Amps single pole switch |
| 119 | One 5 pin 5 Amps socket outlet on same board with other switch |
| 120 | One 5 Pin 5 Amps socket outlet on independent board with other switch |
| 121 | One light point controlled by two, 2-way switches |
| 122 | All as per item No 117.00 above but with 2.5 Sqmm cross sectional area electric cable for 15 Amp socket outlet on independent board, complete all as specified and directed. |
| 123 | S&F in repair of modular switch 1 way 6/10Amp , 1 module, complete all as specified and directed. |
| 124 | S&F in repair of modular switch 1 way 16Amp, 1 module, complete all as specified and directed. |
| 125 | S&F in repair of modular switch 2 way 6 Amp, 1 module complete all as specfied and directed. |
| 126 | S&F in repair of modular bell push, 6 Amp, 1 module, complete all as specified and directed. |
| 127 | S&F in repair of modular socket 6 Amp, 2/3 pin combined 2 module complete all as specified and directed. |
| 128 | S&F in repair of mdoular socket 6 Amp/16 Amp, 2/3 pin combined 2 module complete all as specified and directed. |
| 129 | S&F in repair modular stepped type ceiling fan regulator, 230 volt AC, 2 module, complete all as specified and directed. |
| 130 | S&F in repair of ceiling rose,surface type bakelite 65x17.5 mm, three terminals, complete all as specified and directed. |
| 131 | S&F in repair of door bell electric, ding dong type, AC 230 volts, single phase , complete all as specified and directed. |
| 132 | S&F in repair in repair lamp holder with 9W/11W LED Bulb PVC/polycarbonate type with back plate complete all as specified and directed. |
| 133 | Supply and fixing LED lights fitting 1 x 20W, 220V, Triyca three color CCT change LED batten which can change the color of batten from warm white to natural white to cool white with the help of a simple toggle switch., holder including LED tube light connecting up with three core flexible copper conductor cable of suitable size from ceiling rose complete all as spepcified and directed. |
| 134 | S&F in repair in repair LED mirror light fitting (warm white), 10 watt, 600 mm length complete with all accessories pre-wired and including connecting up with flexible copper conductor cable with suitable size complete all as specified and directed. |
| 135 | S&F in repair in repair LED light fittings, 10 W bulk head luminaries 230V, 50 Hz complete with all accessories and including connecting up with three core copper conductor cable with suitable size complete all as specified and directed. |
| 136 | S&F in repair in repair Decorative, wall mounting fixture, in durable plastic body & designer mesh in gold/white/blue/black finish including 9 W LED lamp and connecting up with driver three core flexible copper conductor cases of suitable size complete all as spepcified and directed. |
| 137 | Supply and fixing LED luminaire 600 mm x 600 mm (2 X 2) Warm White/White as approved, 35/36 watt, 220 V AC recessed type with high efficiency PMMA diffuser soft glare free light complete with driver, holders & LED lamp suitable for roof ceiling including connecting up with driver three core flexible copper conductor cases of suitable size complete all as spepcified and directed. |
| 138 | Supply and fixing LED street light fitting 35 Watt 230 V AC outdoor type with high pressure die cast aluminum hosing and heat resistant complete with driver, lamp bracket with impact and corrosion resistant including thermal management in multiple optics complete with IP 65/66 protection complete including treet light bracket made of 32 mm GI pipe , 1.2 mtr lenght fixed with two nos of clamp , nut and bolts complete all as specified and directed. |
| 139 | Taking down UNSV Fan and deposite to MES Store yard Supply and fixing ceiling fans complete with blades, down rods, remote and accessories, 230 V, 1400 mm sweep. Min air delivery 210 CFM with service value 6.00 BEE. Five star rated with brushless direct current motor (BLDC) complete with motor, blade set of three nos , down rod, canopy, shackle assy complete all as spepcified and directed. |
| 140 | Supply and fix exhaust fan made of sturdy Engineering plastic complete with louvers shutter, voltage 230V, 50 Hz, RPM 1200, Copper winding of sweep 250/300mm including copper wire of size 0.5sqmm from ceiling rose to fan connector including Cutting openings, through bricks walls in round shape, for 300mm dia exhaust fan and making good in cement mortar 1:3 or cement concrete 1:2:4 type B-1 as required including finishing up and matching the disturbed surface and removing surplus unserviceable bricks, hard-core etc from site and rubbish complete all as spepcified and directed. |
| 141 | S&F steel body heavy duty exhaust fan 400mm sweep, double ball bearing, copper wound, with louvers/shutter, 230 volts, 50 Hz, including electrically connecting from ceiling rose to fan connector with 0.5 Sqmm strandard copper conductor 3 core flexible cabCutting openings, through bricks walls in round shape, for 300mm dia exhaust fan and making good in cement mortar 1:3 or cement concrete 1:2:4 type B-1 as required including finishing up and matching the disturbed surface and removing surplus unserviceable bricks, hard-core etc from site and rubbish complete all as spepcified and directed. |
| 142 | S&F storage water heater (geyser) 50 litre capacity electric operated 230 volt including connecting complete water fitting inlet/outlet/vent pipes, mounting bolts, nuts,pvc pipe 2 nos gate valve and bibtap 1 no and carrying out testing for proper functioning complete all as specified and directed. |
| 143 | M & L for Submain wiring with two single core PVC insualated, unseathed, FRLS, 1100 volts grade 4 Sqmm multi stranded copper conductor cable drawn through and including 25 mm dia PVC non metallic rigid conduits and the conduits accessories incl one run of green colour earth continuity conductor with 4 Sqmm multi stranded copper conductor cable, in concealed conduit in wall/ roof/ ceiling or casing caping for geyser and AC complete all as specified and directed. Note : - Two run of single core cable, one run of earth continuity conductor shall be measured as one unit length. |
| 144 | M & L for Submain wiring with two single core PVC insualated, unseathed, FRLS, 1100 volts grade 6 Sqmm multi stranded copper conductor cable drawn through and including 25 mm dia PVC non metallic rigid conduits and the conduits accessories incl one run of green colour earth continuity conductor with 6 Sqmm multi stranded copper conductor cable, in concealed conduit in wall/ roof/ ceiling, complete all as specified and directed. Note : - Two run of single core cable, one run of earth continuity conductor shall be measured as one unit length. |
| 145 | S & F in repair of MCB SP, 240 volt, 6 Amp to 32 Amp capacity, 10 KA, 'C' curve complete all as specified and directed. |
| 146 | S&F in repair of MCB SPN 10 to 40 Amp capacity, 10KA , 'C' curve complete all as specified and directed. |
| 147 | S&F in repair of MCB TPN 63 Amp capacity,415 volt complete all as specified and directed. |
| 148 | S&F in repair in repair MCB distribution board single pole & neutral with 200 Amps rated bus bar, double door, IP-43, DB's made out of CRCA sheet steel enclosure, recessed type, factory made powder coated, 8 way, 240 volts suitable for housing MCB's and isolator's complete in all fixing material/accessories etc complete all as specified and directed. |
| 149 | S&F in repair of in repair MCB distribution board triple pole & neutral IP-43 double door metal, 4 way ,415 volt made out of CRCA sheet steel , factory made powder coated with insulated bus bars , shrouded neutral bars, earth bars , made out of sheet steel enclosure, recessed type, factory made powder coated suitable for housing MCB's complete all as specified and directed. . |
| 150 | S & F in repair single pole and neutral enclosure with a two pin and earth plug and socket complete with one single pole 20 Amp MCB SP `C' series for geyser & AC complete all as specified and directed. |
| 151 | Excavation in trenches not exceeding 1.5m wide and not exceeding 1.5 m depth for laying of cable/ stay assy/LT poles and getting out in hard/dense soil complete all as specified and directed. |
| 152 | Returning filling incl spreading watering and well ramming in layers not exceeding 25cm in hard and dense soil. complete all as spepcified and directed. |
| 153 | Removing excavated material not exceeding 50 mtrs and depositing where directed at a level n. exc 1.5mtr above the starting point complete all as spepcified and directed. |
| 154 | M&L for dry river sand and punning for cushioning and cover for protection of under ground electric cable complete all as specified and directed. |
| 155 | Material and labour for un-reinforced pre-cast concrete cable covers, class LV type-1, flat size 250mm x 150mm x 40mm thick complete all as spepcified and directed. |
| 156 | S & F GI tubes 40mm , Lightgrade (ISI marked), galvanized iron with and including all fitting (ISI marked) for Cable protection laid in trench/wall/pole etc complete all as specified and directed |
| 157 | Supply, laying and testing cable XLPE Insulated ,screened, PVC bedded, galvanized steel strip or wire armoured, electric power cables (heavy duty) 1100 Volts grade with stranded aluminium conductor of size 50 sq mm 3½ core complete all as spepcified and directed. |
| 158 | M & L for earthing complete with GI earth plate electrode 60 cm x 60 cm x 6 mm thick, buried directly in ground (earth pit not less than 2.25 mtr deep below normal ground level) with top edge of the plate not less than 1.5 mtrs below normal ground level connected to GI lead wire 4.00 mm dia by means of bolts, nuts, check nuts and washers of galvanized iron or steel all as shown in electric plate No 3 of SSR Part-I connected to continuous earth wire on main switch board all as specified or indicated and testing on completion including provision of earth wire protection by 15 mm dia medium grade GI pipe and watering pipe shall be 20 mm bore, medium grade including excavation & earth work in any type of soil & disposal of soi, providing alternate layers of charcoal and common salt, constr of PCC earth chamber in mix 1:3:6 type C-1 with 40mm thick RCC 1:2:4 type B-1 cover with handle made out oof 8mm dia bars, watering arrangement with funnel & wire mesh, complete all as specified and directed. Note. The unit rate includes for protection pipe and GI wire 4.00 mm from top of earth plate up to 7.5 meter above ground level. Please Enable Macros to View BoQ information |
| 159 | M & L for earthing complete with GI earth plate electrode 60 cm x 60 cm x 6 mm thick, buried directly in ground (earth pit not less than 2.25 mtr deep below normal ground level) with top edge of the plate not less than 1.5 mtrs below normal ground level connected to GI lead wire 4.00 mm dia by means of bolts, nuts, check nuts and washers of galvanized iron or steel all as shown in electric plate No 3 of SSR Part-I connected to continuous earth wire on main switch board all as specified or indicated and testing on completion including provision of earth wire protection by 15 mm dia medium grade GI pipe and watering pipe shall be 20 mm bore, medium grade including excavation & earth work in any type of soil & disposal of soi, providing alternate layers of charcoal and common salt, constr of PCC earth chamber in mix 1:3:6 type C-1 with 40mm thick RCC 1:2:4 type B-1 cover with handle made out oof 8mm dia bars, watering arrangement with funnel & wire mesh, complete all as specified and directed. Note. The unit rate includes for protection pipe and GI wire 4.00 mm from top of earth plate up to 7.5 meter above ground level. Please Enable Macros to View BoQ information |
| SR No | FileName | File Description |
| 1 | Click here to download tender document | Tender Documents |
| 2 | Click here to download tender document | Tender Documents |
| 3 | Click here to download tender document | Tender Documents |
| 4 | Click here to download tender document | Tender Documents |
We are a group of professionals specializing in custom software development, web development, mobile app development, IOT base solutions, web design, graphics & Enterprise solutions provid.
Copyright © 2026 · All Rights Reserved. Terms of Usage | Privacy Policy
For Tender Information Services Visit : TenderDetail
