|
| 1 | Civil Works |
| 2 | Supplying . fitting and fixing of 32mm thick flush door shutter with approved quality of 30mm thick BWR block board pasted with Imm thick sunmica on both side of approved design and quality including cost of all door fittings and fixtures etc. complete as per the direction of Engineer-In-Charge. |
| 3 | Supplying and fitting-fixing of Un-plasticised Poly Vinyl Chloride(UPVC) ( FENESTA / NCL VEKA LTD.) Three Track - Three Panel sliding window– 60- Series duly manufactured using UPVC reinforced profiles of 108mm x 45 mm x 2.5 mm for outer frames and Window Sash of 39 mm x 58 mm x 2.5 mm capable of mounting single glazing system, structurally reinforced with hot dip galvanised up to 50 microns of minimum thickness of 1.5 mm prefabricated & welded through fusion welding the window frame shall be fitted with 6 mm thick clear toughened glass of SAINT-GOBAIN make duly fixed with EPDM weathering seal resistant and the system is to be installed using Reinforced Large Coupler at the site using anchor fasteners, silicon rubber sealant, easy glazing/ deglazing at site etc., including cost and conveyance of all materials, accessories, labour charges, materials and product conforming to ASTM D 638-14,EN-477-95 and other applicable codes and standards |
| 4 | Supplying and fitting-fixing of Un-plasticised Poly Vinyl Chloride (UPVC) (FENESTA / NCL VEKA LTD.) Casement Door – 60- Series duly manufactured using UPVC reinforced profiles of 60 mm x 55 mmx2.5 mm for outer frames, 102 mm x 60 mm x 2.25 mm for casement Door Sash Profile and 74 mm x 60 mm x 2.5mm mullion profile capable of mounting single glazing system, structurally reinforced with hot dip galvanised up to 50 microns of minimum thickness of 2.0 mm prefabricated & welded through fusion welding the door sash shall be fitted with 12mm thick WPC Board of Greenply make duly fixed with EPDM weathering seal resistant accessories like clipping locking system made of aluminium 1 No., per set of sashes and the system is to be installed at the site using anchor fasteners, silicon rubber sealant, easy glazing/ deglazing at site etc., including cost and conveyance of all materials, accessories, labour charges, materials and product conforming to ASTM D 638-14,EN-477-95 and other applicable codes and standards. |
| 5 | 16mm (5/8'') thick cement plaster (1:6) finished smooth to inside of 9''/10'' thick brick walls after raking out the joint including watering, curing for seven days with cost and conveyance of all materials and labour with T&P required for the work and royalities etc. complete in all respect as per direction of Engineer in charge. |
| 6 | Ground Floor |
| 7 | First Floor |
| 8 | Second Floor |
| 9 | Third Floor |
| 10 | Forth Floor |
| 11 | Fifth Floor |
| 12 | Sixth Floor |
| 13 | Seventh Floor |
| 14 | 2.5 cm.(1'') thick grading concrete(1:2:2) over roof slab after chipping and cleaning the surfaces by wire brushing, laid to proper slope finished smooth including watering, curing, cost, conveyance of all materials such as 6mm size black hard granite crusher broken chips, sand, cement etc. and labour with T& P required for the work with all taxes and royalities etc. complete in all respect as per direction of Engineer in charge. |
| 15 | Ground Floor |
| 16 | First Floor |
| 17 | Second Floor |
| 18 | Fifth Floor |
| 19 | Sixth Floor |
| 20 | Seventh Floor |
| 21 | Finishing wall surface of wall with wall putty (Water based) of approved make and finished smooth and even surface to receive paiting including cost of scaffulding stsging changes with cost of all materials labour etc complete in all respect as per direction of Engineer In Charge. |
| 22 | Ground Floor |
| 23 | First Floor |
| 24 | Second Floor |
| 25 | Third Floor |
| 26 | Forth Floor |
| 27 | Fifth Floor |
| 28 | Sixth Floor |
| 29 | Priming one coat With Wall Cement Primer of approved to make an even Finished Surface with cost, conveyance, taxes of all materials and labour with T&P required for the work etc.complete in all respect as per direction of Engineer in charge. |
| 30 | Ground Floor |
| 31 | First Floor |
| 32 | Second Floor |
| 33 | Third Floor |
| 34 | Forth Floor |
| 35 | Fifth Floor |
| 36 | Sixth Floor |
| 37 | Seventh Floor |
| 38 | Painting 2(Two) coats with any approved Plastic Emulsion paint to wall surface after cleaning the surface including cost of P.E Paint Cost,Coneyance, of all materials and labour with T&P required for the work etc. comple te in all floors complete in all respects as per the direction of engineer incharge. |
| 39 | Ground Floor |
| 40 | First Floor |
| 41 | Second Floor |
| 42 | Third Floor |
| 43 | Forth Floor |
| 44 | Fifth Floor |
| 45 | Sixth Floor |
| 46 | Seventh Floor |
| 47 | Finishing wall surface with Weather Coat two coats with any approved shade including cost, conveyance, , cess and royalties of all materials with labour and T&P required for the work etc., complete in all respect as per direction of Engineer In Charge. |
| 48 | Ground Floor |
| 49 | First Floor |
| 50 | Second Floor |
| 51 | Third Floor |
| 52 | Forth Floor |
| 53 | Fifth Floor |
| 54 | Sixth Floor |
| 55 | Seventh Floor |
| 56 | Supplying, fitting, fixing of partition walling with aluminium anodized section No.9210 and No.9207 with 12mm thick prelaminated partical board etc., complete including cost, conveyance, cess and royalities of all materials with labour and T&P etc., required for the work complete and as per direction of the Engineer-in-Charge. |
| 57 | Supplying Fitting & Fixing of PVC ceiling (Fibre Ceiling) of approved make and specifications with all cost etc complete as per direction of Engineer in Charge. |
| 58 | Supplying, fitting and fixing vitrified tiles of premium grade having thickness 8mm to 10mm confirming to IS 15622-2006 (Group-B) of size 600mm x 600mm Color / Printed series (Homogenous) of approved make (JOHNSON /OASIS / SOMANY/ KAJARIA or equivalent ) in floors on 20mm thick bed of C.M. (1:4) (1cement:4course sand) and filling the joint with white cement mixed with pigment to match the shades of the tile including cost of all materials, taxes, labour, labour cess, T&P etc. required for the work complete in all respect as directed by the Engineer in charge. |
| 59 | Ground Floor |
| 60 | First Floor |
| 61 | Second Floor |
| 62 | Third Floor |
| 63 | Forth Floor |
| 64 | Fifth Floor |
| 65 | Sixth Floor |
| 66 | Supplying, fitting and fixing ceramic wall tiles of premium grade having thickness 7mm to 8mm ( 30cm x 30cm / 40cm x 40cm special plain / printed series ) of approved make conforming to IS:13755 laid on 20mm thick cement mortar (1:4) and filling joints with white cement of approved quality etc. complete including cost, conveyance, taxes, cess royaltieis of all materials with labour (T&P) etc., complete and as per direction of Engineer-in-charge. |
| 67 | Ground Floor |
| 68 | First Floor |
| 69 | Second Floor |
| 70 | Third Floor |
| 71 | Forth Floor |
| 72 | Fifth Floor |
| 73 | Sixth Floor |
| 74 | Supplying Fitting & Fixing of Prepainted Sheet (0.40 mm Thick) in roof in roof drilling holes in windties including fixing of ridges valleys windties including cost of fitting etc complete as per direction of Engineer in Charge. |
| 75 | Structural steel work riveted, bolted or welded in built up sections, trusses and framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer etc all complete as per direction of Engineer in Charge. |
| 76 | Supplying, fitting, fixing of, M.S Grill for (MS Door, MS GATE ,M.S grill ,, MS Square Bar Spike to openings,tubular trusses and collapsible gate ) of approved specification and of approved size, materials and design with a coat of primer including painting two coats over a coat of redoxide primer with cost and conveyance of all materials, labour, royality, etc. complete in all respect and as per direction of Engineer-in-charge. |
| 77 | Dismetalling and removing of doors, window and ventilators including removing of frame, hinges, fastening and stacking the same materials for reuse and removing the debries within 50m lead with including cost of all labour, cess and T&P for the works required for the work etc., complete as per direction of the Engineer-in-charge. |
| 78 | Removing of old lime cement plasterfrom walls including stacking the useful materials for reuse and removing and cleaning the debries within 50m lead including cost, conveyance, royalty and texes of all materials with labour and T&P required for the work etc., complete as per direction of Engineer-in-charge. |
| 79 | Removing old grading plaster from roof slab cleaning the surface, lowering and removing the debries within 50mts lead as per direction of Engineer-in-charge. |
| 80 | Providing and laying water proof with polymeric bituminous membrane (plastic felt) of 2.25kg/sqm and 2mm thickness consisting of layers having center core of 20 microns thermoplastic high molecular high density polythene H.M.H.D.P.E. film of grade 2504 including priming the surface with bituminous primer @ 0.3 Kg/Sqm providing a coat of hot blown bitumen of 1.32 kg/Sqm, applying and laying plastic felt membrance with 10cm overlap adhered to blown bitument of 85/25 or 90/15 grade and covered with a layer of hot blown bitumen @ 1.2kg/Sqm etc complete as per direction of Engineer-in-charge. |
| 81 | Dismentling and removing 2.5cm thick artificial stone flooring including stacking the useful materials for re-use and removing the debries within 50 mts.lead as per direction of Engineer in Charge. |
| 82 | EI WORKS:Supplying and fixing following modular switch/ socket on the existing modular plate & switch box including connections but excluding modular plate etc. as required. 5 / 6 amp switch |
| 83 | 15 / 16 amp switch |
| 84 | 3 pin 5 / 6 amp socket outlet |
| 85 | 6 pin 15 / 16 amp socket outlet |
| 86 | Supplying and installation of AC Point having 16-20A DP MCB, C series with enclosure, Schneider/Siemens/Legrand/ABB c of suitable size as required as per direction of Engg.-in-Charge .All the Components should be warrantied for a replacement period of 1 years against defects with ncessary test report & Warrnaty certificate to be submitted to the department for genuinity of product & to avail free aftersales service within warranty period for acceptance of materials. |
| 87 | Supplying and fixing of Energy efficient recessed mounted LED luminaire made up of CRCA powder coated housing, bottom opening clean room LED luminaire of 600 X 600 x 65 mm size with of 36 W and system lumens output not less than 3600 lumens , IP65 ,dust free & zero maintenance , anti glare high transmittance PMMA diffuser , operating volatge range 150-265 V, high performance potentiometric electronic driver for zero maintenance , 2.5 KV internal urge protection, L70 B 50: 50,000 hrs., CRI not less than 80, CCT of 5700-6500 degree K, THD less than 10%,,IP 65 protection complete with all other accessories suitable for operation on 230 V, 50 Hz supply as required as per direction of Engg.-in-Charge. (Make: Panasonic/ LT/ Havells /Philips/ Wipro /Crompton/ Bajaj).The luminaire should be Replacement Warranty will be 2years. .Each CLEAN ROOM FITTING . |
| 88 | Supplying and fixing 5 amps to 32 amps rating, 240/415 volts, \\"C\\" curve, miniature circuit breaker suitable for inductive load of following poles in the existing MCB DB complete with connections, testing and commissioning etc. as required. Single pole |
| 89 | Supplying, installation, of Wall fan of heavy duty 400 mm sweep 1400 rpm Make-equivalent higher model with 3 star rated of Orient/Havells/almonard/Panasonic/Usha or equivalent reputed make & model A catagory ISI marked as approved ) of wall fan in the existing wall, including fixing & conntection .as required as per direction of Engg.-in-Charge. |
| 90 | S/F of 5 step type Modular electronic Fan Regulator ISI Marked with all connection complete in all respect as per direction of Engineer in charge ( Make-Schneider (Zencelo)/legrand( Myrius-NEXT GEN)/Panasonic (vision) |
| 91 | Supplying, installation, testing and commssioning of 1200 mm sweep white/milky colour ceiling fan Make-equivalent higher model with 3 star(deco,high speed) rated of Orient/Havells/ almonard /Panasonic/Usha or equivalent reputed make & model A catagory ISI marked as approved ) including wiring the down rod of standard length (upto 30 cm) with 1.5 sq mm PVC insulated, copper conductor, single core cable etc. as required as per direction of Engg.-in-Charge) |
| 92 | Supply and drawing of following sizes FR PVC insulated single core multistrand copper conductor in existing surface / recessed STEEL/PVC conduit as required.( Make of wire:-Finolex/Anchor/Polycab/ HAVELLS/RR KABLE/KEI ) 1 x 1.5 sq. mm |
| 93 | 2 x 2.5 sq. mm |
| 94 | 2 x 4 sq. mm |
| 95 | SITC of energy efficient LED tube light fittings with decorative alluminium batten and LED tube light having power rating not more than 20 watt and lumen output not less than 2200 lumen complete with electronic driver and all other accessories with diffuser having 2 years warranty i/c connection etc as required as per direction of Engg.-in-Charge. (Make: Panasonic/LT/Havells /Philips/Wipro /Crompton/Bajaj). The luminaire should be Replacement Warranty will be 2 years . |
| 96 | Supplying and fixing of Energy efficient Recess /Surface mounted square/round shaped LED luminaire made up of CRCA powder coated sheet steel of 25W and system lumens output not less than 3250 lumens (130 lm/ wt) with diffusers for better light transmission and pure effect with High luminous flux LEDs for better light output, CRI not less than 80, CCT of 5700-6500 degree K, THD less than 10%,internal surge protection of 3 KV, complete with Non integrated isolated electronic driver (protects the output /secondary side from any disturbance on the input / primary side ensuring safe operation)and all other accessories suitable for operation on140- 270 V, 50 Hz ,L70 @50,000 burning hrs (2 years warranty)supply .as required as per direction of Engg.-in-Charge (Make: Panasonic/LT/Havells /Philips/Wipro /Crompton/Bajaj) . The luminaire must be Replacement Warranty will be 2 years. Please Enable Macros to View BoQ information |
