|
| 1 | Dismantling floor, hearth or wall tiling including cement mortar bedding removing serviceable tiles to store and rubbish off the premises. |
| 2 | M&L for non skid ceramic coloured tiles 1st quality 7 to 8mm thick, (square/ rectangular), area of each tile exceeding 0.18sqm, but not exceeding 0.36sqm as in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match the shade of tiles, laid over and including 15mm thick screed bed or bedding layer in cement mortar 1:6, complete all as specified and as directed by the Engineer-in-Charge.Note: Colour and shade of tiles shall be approved by AGE(I) and contractor shall not have any claim whatsoever on this account. |
| 3 | M&L for glazed ceramic tiles, coloured, of size 350mm x 250mm/450 mm x 350mm, thickness not less than 7mm as in vertical surfaces such as skirting/dado etc, set and jointed in neat cement slurry and pointed with white cement mixed with pigment to match the shade of tile, fixed over and including 10mm thick rendering (bedding layer) on brick/concrete surface in cement mortor 1:4, complete all as specified and as directed by the Engineer-in-Charge.Note: Colour and shade of tiles shall be approved by AGE(I) and contractor shall not have any claim whatsoever on this account. |
| 4 | M&L 20mm Granite (of any type) work (table rubbed and polished) in steps, jambs, pillars, window cills, cooking platforms, and like over 15mm thick screed bed in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite complete all as specified and directed. |
| 5 | M&L for Chequered cement concrete tiles of size 20 cm x 20 cm x 25 mm/ 30cm x 30cm x 25mm thick set, jointed and pointed in neat cement slurry in floors, paths etc, with grey cement and pigment, laid over and including 15mm thick screed bed or bedding layer in cement mortar 1:6, complete all as specified and directed by Engineer-in-Charge. |
| 6 | M&L for Plain cement concrete, 1:2:4, type B-1 using 20mm graded crushed stone aggregate, 25mm thick, as in levelling course of flooring, complete all as specified and as directed by the Engineer-in-Charge. |
| 7 | Taking down cement plastering on stone wall/brick wall etc including racking out of joints hacking for key scrubbing down with water etc. |
| 8 | M&L 15mm thick rendering on fair faces of wall in CM 1:6 on brick/concrete surface and finishing the surface even and smooth with out using extra cement. |
| 9 | M&L 15mm thick rendering on fair faces of wall in CM 1:4 on brick/concrete surface and finishing the surface even and smooth with out using extra cement. |
| 10 | Material and labour for preparation of new plastered surfaces of walls and applying two coats of oil bound distemper over a coat of primer, complete all as specified. |
| 11 | Material and labour for preparation of new plastered surfaces of walls and applying two coats of cement based paint over a coat of alkali resistant primer, complete all as specified. |
| 12 | Taking up or down 15 mm bore steel tubing and connection including cleaning for re-fixing or removal to store complete all as specifed and directed. |
| 13 | M&L 25mm outer dia 3-layer PP-R P o l y p r o p y l e n e random copolymer) concealed pipes SDR 7.4 (PN16) UV stabilized and antimicrobial fusion welded having thermal stability for hot & cold water supply including all PP-R plain & brass threaded p o l y p r o p y l e n e random fittings fixed complete to walls, ceilings or in floors etc complete all as specified and directed. |
| 14 | Cutting chases, pinning in making good to facings where required and pointing in cement mortar 1:3 to ends or edges of shelves , for water tubing etc and making good, cutting exc 10cm girth but not exc 20cm girth in brick/stone walls. |
| 15 | Dismantiling of water tanks of capacity n. exc 250 & exc 500 ltrs including all necessary fittings complete. |
| 16 | S&F 500 ltrs PVC rotational moulded polyethylene water storage tanks triple layer made (cylindrical vertical with closed top ) hoisted and fixed in position all as specified in SSR part-I |
| 17 | S&F 32 mm dia PPP-R gate valves (Brass inserted) as per requirment of the site complete all as specified. |
| 18 | S&F 32 mm dia PPP-R ball valves (Brass inserted) as per requirment of the site complete all as specified. |
| 19 | S&F in repair Vitreous china wash hand basin (550X400mm) white, flat back excluding taps, including brackets & 32mm waste coupling complete all as specifed and directed. |
| 20 | S&F in repairs Vitreous Chinaware squatting pan, orissa pattern size 580mm x 440mm with integral foot rests, white and Size 110 x 110 PVC ‘S’ trap, front or back inlet, including provision of lime concrete, and making good to floors, complete all as specified and directed by the Engineer-in-Charge. |
| 21 | S&F in repair Viterous China urinal, bowl type flat back, size 465x355x265mm white (minimum) with grating and union for discharge pipe, (excluding flushing cistern, flush pipe and waste pipe) complete including providing and fixing plugs, bedding urinal against wall in cement mortar 1:2 securing urinal plugs with and including 60mm long brass screws, pointing around urinal back in cement, fixing automatic flushing cistern with brackets, flush pipe, grating and union for discharge pipe, fixed in repairs, complete all as specified as directed by the Engineer-in-Charge. |
| 22 | S&F in repairs sink made of stainless steel 1mm thick kitchen or laboratary with plugs, washers and waste pipe: including bedding in cement mortor to dwarf wall or including fixing cantilever brackets and connecting union to pipe overall size 495mm x 420 mm and bowl size 410mm x 330mm, complete all as specified and directed by Engineer-in-Charge. |
| 23 | S&F 10 Litre PVC valveless syphonic action flushing cistern low level white with inlet ball valve, float and handle including brackets and flush pipe of polyethylene of low or high density or PVC 32 mm dia for low level cistern. |
| 24 | S&Fin repair 15mm dia fancy type chromium plated Bib taps cast copper alloy with crutch or butterfly handle screwed down, screwed for iron pipes or for brass ferrule |
| 25 | S&F in repair 15mm dia fancy type pillar taps, cast copper alloy with capstan heads, chromium plated scewed down high pressure with or without lettered Hot or cold with long screwed shanks and fly nuts screwed for iron pipe fixed complete all as specified. |
| 26 | S&F swivel shower of PTMT any colour for fixing with 15mm pipe with shower arm 15mm size ,195 mm long with bend of 45 degree with flange of PTMT any colour fixed in repairs. |
| 27 | S&F in repair 15mm dia stop valves/angle valve chromium plated, fancy type with long shank and cup screwed down, high pressure with crutch or butterfly handle, screwed both ends for iron pipe or for unions as specified . |
| 28 | S&F 15mm PVC connection 450mm long with PTMT nuts of superior quality as specified. |
| 29 | Taking down shutter exc 1.0 sqm but n.exc 2.0sqm, complete all as specified. |
| 30 | Taking down chowkats or frames with shutters (without taking off shutter from the frame) of any description alongwith fittings n.exc 1.5sqm each. |
| 31 | Taking down chowkats or frames with shutters (without taking off shutter from the frame) of any description alongwith fittings exc 1.5sqm n.exc 4 sqm each. |
| 32 | S&F PVC Door frames of size 50 mm x 47 mm made of 5 mm single side pre-lam colour PVC sheet and edges will be painted to match with pre lam sheet reinforced with MS square tube, suppling and fixing in opening as per specification and drawing. |
| 33 | Factory made solid panel PVC door shutter 30 mm thick (style) consisting of frame made out of MS tubes for top & bottom rails. MS Frame shall be covered with heat moulded plain colour PVC 'C' channel having a PVC sheet strip of 20 mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail; panelling of plain colour PVC sheet to be fitted in the MS frame welded/sealed to the stiles & rails with suitable PVC sheet beading, and joined together with solvent cement, suppling & fixing in the frame at site as per specification & drawing, complete all as specified and as directed by the Engineer-in-Charge. |
| 34 | S&F 2nd class hard wood Plain, solid, straight chowkats and frames, wrought , framed rebated on the solid , rounded or chamfered put together with glue pinned at joints, supplied and fixed. |
| 35 | S&F 35 mm thick 2nd class hard wood Plain framed, panelled shutters (any number of panels), with panel of timber flat on both sides (feather edged) or 12 mm thick BWP of veneered particle board medium density wood commercial face veneers fixed to chowkats. |
| 36 | S&F 2nd class hardwood glazed and skelton door shutters 35 mm thick divided into squares open rebated and prepared to receive glass, gauge etc edges of framing plain, chamfered, rounded fitted with mitred beads for securing glass etc, size of members as specified in SSR Pt I section 8 clause 8.20 (a) supplied and fitted to chowkats with plain, chamfered or rounded mitred and rebated bars any numbers. |
| 37 | S&F Galvanised mild steel wire cloth, 0.56mm nominal dia of wire and avgerage width of aperature 1.18 mm fixed with tinned tacks, or galvanised wire staples. |
| 38 | S&F 4.8mm thick , plain sheet glass, selected quality and glazing with oil putty in squares exc 0.5 sqm in each pane complete |
| 39 | S&F aluminium anodised barrel tower bolts of extruded section 150mm long all as specified |
| 40 | S&F Butt hinges, medium weight cold rolled 75mm size ISI marked all as specified. |
| 41 | S&F Extruded aluminium alloy handles fabricated type anodised 100mm size all as specified |
| 42 | Demolition of cement concrete un reinforced in ground floors and pavings exceeding 15cm thickness (above ground level) including disposal of unserviceable materials,debris and rubbish to a distance not exceeding 100 metre, complete all as specified and as directed by the Engineer-in-Charge. |
| 43 | Cleaning the side/bottom of sunken floor before applying 25mm thick PCC 1:2:4 type B0 using 12.5mm graded stone aggregate as in padding of sunken floor finishing the surface even and smooth by using extra cement by using WPC 3% by weight of cement (i.e Pidilite/Aquatyte/ Dr fixit etc, WPC shall be measured separately) complete all as specified and directed |
| 44 | Supply only integral waterproofing compound |
| 45 | M&L for 15mm thick rendering in 1:3 CM with using 3% WPC as in sunken portion and finishing the surface even sand smooth without using extra cement and applying evenly a tack coat of industrial bituminous 85/25 @ 1.20 Kg per Sqm in sunken floor including cleaning surfaces complete all as directed. |
| 46 | M&L for cement concrete type E2, 1:5:10 (using 40 mm graded aggregate) as in sunken floor, complete all as specified and directed. |
| 47 | Dismantling of drain pipes of size 100mm bore or below (Salt glazed ware/AC pipe/reinforced concrete pipe/CI/PVC pipe ) set in cement mortar including concrete bed & haunching (if required) and removing away complete from site, complete all as specified and as directed by the Engineer-in-Charge. |
| 48 | S&F 110mm PVC (SWR) pipes single socketed in any length with rubber ring joints, fixed to walls complete |
| 49 | S&F 75mm PVC (SWR) pipes single socketed in any length with rubber ring joints, fixed to walls complete |
| 50 | S&F 110mm PVC (SWR) bends with or without access door complete all as specified and directed. |
| 51 | S&F 75mm PVC (SWR) bends with or without access door complete all as specified and directed. |
| 52 | M&L 75mm PVC (SWR) floor trap , plain with grating including jointing with solvent cement complete all as spd and directed |
| 53 | Dismantling boarding/ false ceiling of any description, fixed in any position with nails, complete all as specified and directed by the Engineer-in-Charge. |
| 54 | S&F GI frame work size of grid 605 x 605 mm for seamless ceiling comprising of GI perimeter channel 0.55mm thick with two unequal flanges of 20 and 30mm and web of 27mm fixed to surrounding wall using nylon sleeves and screws at 450mm centre to centre/intermediate channel 0.9mm thick having two equal flanges of 15mm each and web of 45mm suspended from sofit at approx 900 mm centre to centre with GI cleat and steel expansion fasterner with and including ceiling section (not exc 1.2m length) of 0.55mm thickness having kurled web of 50mm and flange of 26mm each with lips of 10.5mm fixed to the intermediate channel with connecting clips acress the intermediate channel at 457mm centre to cnetre including hangers 6mm dia.GI (upto 1200mm length) adjusting level fixed tp roof slabs by means of ceiling cleats made out of GI flat 40 x 3mm size 60mm ling and expansion hold fasterner 12.5mm dia 40mm long including S&F 8mm thick non asbestos fibre cement building boards fixed or laid/inserted to timber/GI/ Aluminium frame work, complete all as specified and directed by Engineer-in-Charge. |
| 55 | S&F 2nd class soft wood boarding, 15mm thick, as in wall panelling, plain one side and edges tongued and grooved or rebated, fixed with nails in any situation including french polishing on surface of any description width or girth including cleaning and preparing the surface including a coat of wood filler on new works with two or more coat upto satification of Engr-In-Charge. |
| 56 | Note :- An amount of Rs. Rs 11,930.00 on account of credit schdule for Sch 'A' Part-II Shall be deducted from the total amount of BOQ to arrive at the contract sum. Please Enable Macros to View BoQ information |
