|
| 1 | Demolishing brick work manually/bymechanical means includingstacking of serviceable material and disposal of unserviceable material within 50 metres lead as per direction of Engineer-in-charge.15.7.4 In cement mortar. |
| 2 | M-150 Brick work in1:4 cement and course sand mortor in pilinth and foundation including supply of all material labour & T&P as per SI No -305 Toilet wall |
| 3 | 20mm cement plaster 1:3 (1cement :3 coarese sand ) finished whith 3mm thick flotion coat of neat cement S.i ) 13.9 out side wall |
| 4 | Providing and fixing partition upto celing height consisting of G.I frame and re3quired board including providing and fixing of frame wosrk made of special section power pressed/roll form G.I sheet with Zinc coation of 120 ms/sqm(both side inlusine) consisting of floor and ceiling channel 50mm wide having wqual flanges of 32 mm and 0.50mm thick fixed to the floor and ceiling at the spacing of 610 mm center to center with dash fastenr of 12.5 mm dia meter 50mm length or suitable anchor of engieer in charge all complete. DSR No 9.105.1 |
| 5 | Providing and fixing, in position concealed G.I section for wall paneling using borad o frequied thickess fixed ont the W Profile(0.55mm thick having a knurled web of 51.55mm and two flanges of 26 mm each with lips fo 10.55mm, placed @ 610 mm c/c in perimetr channel having one flange of 20 mmand another flange of 30 mm withfully threaded self tapping dry wall screwes.Board is fixed to the W prfile with 25mm countersunk ribbed head scres @ 200 mm c/c all coplete as per the frawing & dirction sot engieer in charge the joints of the boards are finished with specially formukated in all complete.9.133.1 |
| 6 | Providing and fixing aluminium work for doors, windows, ventilators andpartitions with extruded built up standard tubular sections/ appropriate Zsections and other sections of approved make conforming to IS: 733 and IS: 1285, fixing with dash fasteners of required dia and size, includingnecessary filling up the gaps at junctions, i.e. at top, bottom and sides with required EPDM rubber/ neoprene gasket etc. Aluminium sectionsshall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, Aluminium snap beading forglazing / panelling, C.P. brass / stainless steel screws, all complete as perarchitectural drawings and the directions of Engineer-in-charge. (Glazing,paneling and dash fasteners to be paid for separately |
| 7 | Polyester powder coated aluminium (minimumthickness of polyester powder coating 50micron DSR V 2 21.1.2.3 |
| 8 | Providing ,assembling and supplying vision glass pannels (IGUs) comprising of hermetically-sealed 6-12-6 mm insulated glass (double glazed) vision panel units of size and shape as required and specified,Comprising of an outer heat strengthened float glass 6mm thick,of approved colour and shape with reflective soft coating on surface # 2 of approved colour abd shade ,an inner Heat Strengthned clear directed by the Engineer-in-charge.dsr 2016 item no 25.3 |
| 9 | Supply and fixing of Unbranded Rectangular Matt Tress Name Plate 18 Inch 6 Inch NA (np186) etc all complet as per gem portal rate. |
| 10 | Supply and fixng wall fan |
| 11 | Supply and fixng Fancy Light MR |
| 12 | Supply and fixng supply and fixng inaguration stone |
| 13 | Supply and fixing wooden Counter with 19 mm thick commercial board and 0.8 mm thick approved kaminates on top and front of counter i/c hardware labour T&P complete ( 750 mm wide top as per direction of E/I.) |
| 14 | For meeting hall 750 mm wide top with special quality laminated as per direction of E/I (Measurement in plan only) Please Enable Macros to View BoQ information |
