|
| 1 | Hire Charges for supplying and fixing in position M.S Steel framed fixed weldmesh grill using 35 x 35 x 6 mm angle of outer frame with 25 x 5 mm flats stiffeners welded horizontally and vertically in both direction and using 3\\"x 1\\" and 6 x 10 Gauge weldmesh with necessary locking facilities and hinges including cost of red oxide primer.(Inner,outer,Door Steel Barricading Arrangements) and removing the Same After Counting is over, for Maximum 30 days |
| 2 | Hire Charges for Supply and fixing in position fine wiremesh netting inclusive of cost of red oxide primer etc.,Complete Complying with standard specifications and removing the Same After Counting is over, for Maximum 30 days. |
| 3 | Hire Charges for Supplying and fixing Door grill including cost of fixing charges and fixing in original position etc., Complete Complying with standard specifications and removing the Same After Counting is over, for Maximum 30 days |
| 4 | Hire Charges for Supplying and fixing M.S plain sheet arrangements including cost of fixing charges and fixing in original position etc.,and removing the Same After Counting is over, for Maximum 30 days. |
| 5 | Hire Charges for Supplying and fixing of steel door with the following specification MS angels of size 40x40x6mm are used for the outer frames and M.S. angles of size 35x35x6mm for the shutter frames stiffeners with 32 x 6mm M.S flat is provided at required intervals in the shutter frame. 18-gauge C.R. sheet laid as panel in the shutter and welded intact. M.S. flat 18x5mm is welded over the 32 x 6mm M.S. flat sandwitching the C.R. sheet in between additional stiffeners with 18x5mm M.S. flat is provided diagonally at the rear side of the shutter, 3nos. of hinges in case of single leaf and 6nos. of hinges in double leaves shutter to be provided 6nos. of holdfasts 120 mm in length made of angle section spliced at the ends are welded to the outer frames of the door and removing the Same After Counting is over, for Maximum 30 days. |
| 6 | Hire Charges for Supplying and fixing the Adithandah for safety aspects. The rate includes the cost of materials and labour for providing safety arrangements with Adithandah for door including locking arrangements as directed by the departmental officers and removing the Same After Counting is over, for Maximum 30 days. |
| 7 | Hire Charges for Providing the ordinary plastic chair for the sitting area the rate include the Labour Charges for Loading and Unloading,cost of transportation, material etc., for Maximum 30 days. |
| 8 | Hire Charges for Providing the casurina props including earthwork of size 250 x 250 x 750 mm for the wooden post of size of 10cm dia. With height of 2.40m. In the vertical props with interval of 2.50m and horizontal props with 0.50m interval of three rows etc., The rate includes the fixing the props underneath the Ground surface, labour charges, material, removing, transportation etc.(outer Wooden Barricading Arrangements)and removing the Same After Counting is over, for Maximum 30 days. |
| 9 | Hire Charges for Providing the casurina props for the size of 10cm dia. With height of 2.40m. In the vertical props with interval of 1.00 m and horizontal props with 0.50m interval of three rows etc., The rate includes the fixing charges, labour, material, removing, transportation etc.(Inner Wooden Barricading Arrangements) and removing the Same After Counting is over, for Maximum 30 days. |
| 10 | Hire Charges for Cleaning the Scrub Jungle and Levelling the site with JCB Machinery.The Rate includes the Cleaning and levelling charges,Transportation,Driver Beta,etc., |
| 11 | Hire Charges for Tractor with dozer to make removal of jungles leveling the site etc. Complete as directed by the departmental officers. |
| 12 | Hire Charges for Providing the carpet for the Pandal Area and walking Area with thickness of 2mm in the colour of Grey/Green. The Rate includes the cost of Matrial, transportation, laying and fixing, providing tape in the joints labour etc.,and removing the Same After Counting is over, for Maximum 30 days. |
| 13 | Hire Charges for Supplying and fixing of Rexin type Sofa of three Seated one Number of size length 1.80m breadth of 0.63m,height 1.05m,Single Seated 2 Number of size Length 0.90m,breadth 0.68m,height 1.05m,contain wooden frame with belt provided through length and provided full foam for 320 cc density for the height of 0.15m and the hand rest with wooden panel for the three seated sofa the bottom 3 inches moulded pvc bush for six number for single type sofa 4 number of pvc bush it includes the cost of material,labour,transportation,loading & unloading charges etc..,and removing the Same After Counting is over, for Maximum 30 days. |
| 14 | Hire Charges for Providing steel rack for the control unit ballot of VVpat in the strong room, with length of 1.20 m,Breadth of 0.70 M, Height of 1.85m.It contain the Plates with the above mentioned size, the leg of frame are L type frame for the plain of steel Plates.and removing the Same After Counting is over, for Maximum 30 days. |
| 15 | Hire Charges for Providing the Transparency Acrlic sheet for the thickness of 6 MM for the VVPAT counter with complete standard specification. |
| 16 | Hire Charges for Supplying and Fixing of candidate Name board with a Material of foam sheet of 10mm thick with ovel vinyl sheet plated with the foam sheet. It is included ( Printing,Labour,Material,Transport etc.,) and removing the Same After Counting is over, for Maximum 30 days. |
| 17 | Hire Charges for Supplying and fixing of constituency way name board with a material of vinyl board for the size of 0.30 M Length,0.15 M Height.The cost included material, Labour,Printing,transportation charges etc.,and removing the Same After Counting is over, for Maximum 30 days. |
| 18 | Hire Charges for Providing stainless steel table for the size of 2.40m length,0.60 m, Breadth,0.80 m Height with foldable type the leg are made of steel with bushes.The cost included the material,labour,transportation charges and shifting etc.,and removing the Same After Counting is over, for Maximum 30 days. |
| 19 | Hire Charges for supplying and placing in position of shape system table of Size 8.70 x 0.60 x 0.75m made out of Teak wood leg of 75 x75mm size placed at regular interval to support the top ply wood and additional horizontal plate with roller arrangements below the top board to enable to keep the key board and other stationeries covered with high qaulity and approved brand ply wood on inner face to face and top side. The surface of plywood is affixed with teak wood ply sheet with necessary polish and make it good and elegant finish. The rate incluisve of all materials, fevicol,adhesive materials,nails,polish,conveynce of materials and all incidental charges etc. complete complying with standard specification and as directed by the departmental officers.and removing the Same After Counting is over, for Maximum 30 days. |
| 20 | Hire Charges for providing GI Sheet Panthal arrangements (20'x40') and removing the Same After Counting is over, for Maximum 30 days. |
| 21 | Hire Charges for Providing Wooden Stage with thickness of 40-50mm with steel scaffolding legs for the supports and steps for the size of 0.90mx0.30mx0.15m(2) Nos. The rate includes the cost of fixing, transportation, Arranging, Removing etc.,and removing the Same After Counting is over, for Maximum 30 days. |
| 22 | Pointing the top of roof of following size of approved quality set in Cement Mortar 1:3 (One Cement and Three Crushed stone Sand) 12mm thick mixed with water proofing compound conforming to ISS at 2% by weight of cement used and the joints pointed neatly to full depth of tiles with the same cement mortar mixed with red oxide and water proofing compound including curing etc., complete complying with standard specification and as directed by the departmental officers |
| 23 | Hire Charges for supplying and fixing of steel divider for the pathway in all blocks and staircase with a material. the cost includes the material,fixing,welding ,labour charges etc.,and removing the Same After Counting is over, for Maximum 30 days. |
| 24 | Hire Charges for providing safety arrangements with 6mm thick commercial ply wood without frame with entire area with necessary screws, nails for the windows and ventilators etc as directed by the departmental officers and removing the Same After Counting is over, for Maximum 30 days. |
| 25 | Hire Charges for Providing and Arabian tent arrangements at required places shown by the departmental officers with a size of tent (20'x20'). The rate includes the hire charges for Arabian tent,Labour charges for providing and removing after the completion of counting and other Incidental charges etc., for Maximum 30 days. |
| 26 | Hire Charges for providing 5 seater Mobile Toilet arrangements, it includes the cost of labour charges,conveyance charges,Loading and unloading charges etc., Complete complying with standard specifications and removing the Same After Counting is over, for Maximum 30 days. |
| 27 | Supplying and fixing of RCC well Ring of thickness of size 1.20 m dia in RCC 1.2.4 using 20mm HBGS jelly including cost of Reinforcement steel in position but including cost of moulding charges ,casting of slab,finishing, curing and fixing in position in all floor etc complete complying with standard specifications. |
| 28 | Supplying and fixing in position best quality PVC soil / waste pipes of various dia having 6 kg / sq.cm. pressure BIS mark and providing leak proof joints using PVC adhesives including fixing to the wall with special PVC / MS clamp, teak wood plugs, brass screws, etc., and making connection to all sanitary fittings, dismantling masonry / RCC works wherever found necessary and making the good dismantled portion to the original condition, including testing for any leakages, etc., complete complying with standard specifications. The rate for earth work excavation will be measured and paid separately in the cases where the pipe lines are proposed to laid below ground level |
| 29 | 110mm PVC Soil pipe |
| 30 | 75mm PVC Soil pipe |
| 31 | Supplying and fixing in position PVC specials of the following dia and types of approved quality confirming to BIS and providing leak proof joints including fixing to the walls and giving connection to the PVC soil stacks, dismantling the masonry or RCC works and re-doing the dismantled portion to original condition etc., complete complying with standard specifications. (The PVC specials should be got approved by the Executive Engineer before use on works). |
| 32 | 110mm dia Elbow |
| 33 | 110mm dia Ellbow with Door |
| 34 | 75mm dia Elbow |
| 35 | 75mm dia Elbow woth Door |
| 36 | Supplying, laying and jointing UPVC pipes (having working pressure 10 kg. / sq.cm) of approved quality and best variety conforming to BIS of the following dia including cutting, threading and fixing UPVC specials using UPVC adhesives (but excluding cost of such specials) and fixing into wall with teak wood plugs, PVC clamps and screws making holes on the wall (or) drilling holes in the roof and making good the dismantled portion to original condition with necessary brick work / cement concrete and plastering neatly wherever necessary with necessary scaffolding charges, etc., complete complying with standard specifications. The UPVC pipes shall be got approved by Executive Engineer before use on works. External water Supply, Above Ground level |
| 37 | 25mm dia UPVC Pipe |
| 38 | Supplying UPVC Specials (with working pressure 10 kg. / sq.cm.) in water supply arrangements (both in internal and external water supply arrangements |
| 39 | 25mm dia UPVC Elbow |
| 40 | 25mm dia UPVC Tee |
| 41 | 25mm dia UPVC Union |
| 42 | 25mm dia UPVC coupling |
| 43 | 25mm dia UPVC Bend |
| 44 | Supplying and fixing in position 15mm dia brass CP screw down tap / Pillar tap (heavy duty) of approved make conforming to BIS specifications and quality including cost of shellac, thread, etc., complete complying with standard specification and including cutting and threading wherever necessary. |
| 45 | Supplying and fixing in position first quality and approved variety of Gun metal Gate Valve / Wheel Valve with BIS make of the following dia including cost of shellac, thread balls, etc., complete complying with standard specifications (for both internal and external water supply arrangements). The valves to be used on work shall be got approved by the Executive Engineer before use on work. |
| 46 | 25 mm dia G.M. Gate Valve |
| 47 | Hire Charges for water tank steel stand and PVC water storage tank of capacity of 500 litres complete complying with standard specifications and removing the Same After Counting is over, for Maximum 30 days. |
| 48 | Supplying and fixing of stored pressure ABC (Mono Ammonium Phospate) Powder Type Fire Extinguisher of 6 kg. capacity as per IS:15683 with pressure gauge, discharge hose & control nozzle, wall mounting bracket, safety clip etc., including conveyance, all incidental charges, neccessary scaffolding and re-doing the dismantled portions to its original condition wherever found neccessary etc, complete as per standard specification and as directed by the Departmental Officers. |
| 49 | Supplying and fixing of Carbon-di-Oxide Gas Type 2 kg. capacity Fire Extinguisher as per New IS15683, complete with control valve, discharge hose with horn, wall mounting bracket, safety clip etc., including conveyance, all incidental charges, neccessary scaffolding and re-doing the dismantled portions to its original condition wherever found neccessary etc., complete as per standard specification and as directed by the Departmental Officers. |
| 50 | Supplying, installation, testing and commissioning of Manual Call Point (MCP) providing on wall using fixing accessories like screws, plug, clamps and etc., as per standard methods and as directed by the Departmental Officers. |
| 51 | Brick partition walls of 10.80cm thickness using best quality Burnt Clay Brick of size 8-3/4\\" x 4-1/4\\" x 2-3/4\\" with class designation of 7.5 conforming to IS 1077-1992 in Cement Mortar 1:3 (One Cement and Three CS Sand) using hoop iron reinforcement if found necessary including Cost of Mortar Plasticizer, curing etc. complete complying with standard specification and as directed by the departmental officers. (Hoop iron reinforcement will be measured and paid for separately) |
| 52 | In First Floor |
| 53 | In Second Floor |
| 54 | Plastering with Cement Mortar 1:5 (One cement and Five Plastering sand), 12mm thick in all floors including mortar plasticizer at 200ml per 50Kg of cement used, curing etc. complete complying with standard specification and as directed by the departmental officers. |
| 55 | Painting New Plastered Wall Surface with Two finishing coats of ready mixed (Emulsion) of approved quality and colour over one coat priming coat in all floors including the cost of primer etc., complete complying with standard specification and as directed by the departmental officers.(The make, quality and colour of paint should be got approved by the Executive Engineer before use on works.) |
| 56 | Dismantling clearing away and carefully stacking the materials useful for reuse of brick masonry walls etc., complete complying with standard specification and as directed by the departmental officers.and restoring the surface into the original condition. |
| 57 | GST @ 18 % Please Enable Macros to View BoQ information |
