|
| 1 | Supply and erection of fancy/ decorative lights of following types / specifications including making connection, testing and commissioning etc. as selected by occupant of house. The job includes cost of LED lamps, (As per Complete Item No. 1 of the DNIT) |
| 2 | Round Shape 10\\" surface light outed ring made of brass base |
| 3 | Hanging type light with 3 lamps |
| 4 | Wall light with wooden base and coated glass |
| 5 | Spot Light with brass base |
| 6 | Double arm wall light with clear glass and brass coated base |
| 7 | Hanging type lamp shade with clear glass |
| 8 | LED spot light |
| 9 | Single arm wall light with clear galss and 2 nos. supporting brass coated arm |
| 10 | S/E of 90 cm. long electric chimney including 6 inch. Internal dia flexible alum. Pipe. The aluminum pipe shall be covered with PVC cap at end side or outer side. The length of pipe as per site requirement upto 3mtr long. (As per Complete Item No. 2 of the DNIT) |
| 11 | DSR ITEM NO. 8.9.5Batten light (System lumen efficacy ≥105 <120 lm/Watt) Supplying, installation, Testing & Commissioning of LED surface mounted Batten light of following body material and construction as per IS : 10322 with driver (Replaceable) as per the requirement with Driver efficiency >85% ,(As per Complete Item No. 3 of the DNIT)). |
| 12 | 18-22 watt |
| 13 | 36 watt |
| 14 | DSR ITEM NO. 9.2Brush Less Direct Current (BLDC) MotorSupply, Installation, Testing and Commissioning of ceiling fan with Brush Less Direct Current (BLDC) Motor, class of insulation: B, 3 nos. metal (Aluminum alloy) blades, 30 cm long down rod, 2 nos. canopies, shackle kit, safety rope, (As per Complete Item No. 4 of the DNIT) |
| 15 | 900mm, service value ≥ 5.1 CM/Min/Watt, air delivery 130 CM/Min (Minimum) |
| 16 | 1200mm, service value ≥ 6.0 CM/Min/Watt, air delivery 210 CM/Min (Minimum) |
| 17 | 1400mm, service value ≥ 6.0 CM/Min/Watt, air delivery 245 CM/Min (Minimum) |
| 18 | Supply & erection of Cabin Fan 16” sweep oscillating type complete with blades & regulator. The fan should have 2 of pull cord switches, one for oscillation and one for speed regulation. The fan should be of Havells make Swing / Crompton make WM Wind FIO (HiSpeed),(As per Complete Item No. 5 of the DNIT) |
| 19 | DSR Item No. 8.16.3LED Flood Light, powder coated pressure die cast aluminum (System lumen efficacy ≥120 and <135 lm/Watt)Supplying, installation, Testing & Commissioning of Flood Light, powder coated pressure die cast aluminium body with built in or separate driver as per the requirement with Driver efficiency >85%, Input voltage,(As per Complete Item No. 6 of the DNIT) |
| 20 | 100 Watt |
| 21 | DSR Item No.1.21Supplying and fixing of following sizes of medium class PVC conduit along with accessories in surface/recess including cutting the wall and making good the same in case of recessed conduit as required. |
| 22 | DSR Item No. 1.17Supplying and drawing following sizes of FRLS PVC insulated copper conductor, single core cable in the existing surface/ recessed steel/ PVC conduit as required. |
| 23 | 3 x 1.5 sq. mm |
| 24 | 3 x 2.5 sq. mm |
| 25 | DSR Item No.39.17 Supplying, drawing, Installation, Testing and commissioning of CAT6 UTP LSZH 23AWG Twisted Pair Cable in existing conduit/ on surface, Category 6 Unshielded Twisted Pair, (As per Complete Item No. 9 of the DNIT) |
| 26 | 1 Run of cable |
| 27 | DSR Item No. 1.10Wiring for light point/ fan point/ exhaust fan point/ call bell point with 1.5 sq.mm FRLS PVC insulated copper conductor single core cable in surface / recessed medium class PVC conduit,(As per Complete Item No. 10 of the DNIT) |
| 28 | Group B Please Enable Macros to View BoQ information |
