|
| 1 | Excavating trenches of required width for pipes, cables, etc including excavation for sockets, and dressing of sides, ramming of bottoms, depth upto 1.5 m, including getting out the excavated soil, and then returning the soil as required, in layers not exceeding 20 cm in depth, including consolidating each deposited layer by ramming, watering, etc. and disposing of surplus excavated soil as directed, within a lead of 50 m DSR 2.10 |
| 2 | Pipes cables etc. not exceeding 80mm dia as per DSR No. 2.10.1.1 |
| 3 | Pipes cables etc.exceeding 80mm dia but not exceeding 300mm dia as per DSR No. 2.10.1.2 |
| 4 | Brick work with F.P.S. bricks of class designation 75 in superstructure above plinth level up to floor V level in all shapes and sizes in : DSR 6.4 |
| 5 | Cement mortar 1:6 (1 cement : 6 coarse sand) : DSR 6.4.2 |
| 6 | 12 mm thick Cement Plaster finished with a floating coat of neat cement of mix .. DSR 13.7 |
| 7 | 1:4 …DSR 13.7.2 |
| 8 | Providing and fixing white vitreous china pedestal type water closet (European type) with seat and lid, 10 litre low level white vitreous china flushing cistern & C.P. flush bend with fittings & C.I.brackets, 40 mm flush bend, overflow arrangement with specials of standard make and mosquito proof coupling of approved municipal design complete, including painting of fittings and brackets, cutting and making good the walls and floors wherever required: |
| 9 | W.C. pan with ISI marked white solid plastic seat and lid. DSR 17.3.1 |
| 10 | Providing and fixing wash basin with C.I. brackets, 15 mm C.P. brass pillar taps,32 mm C.P. brass waste of standard pattern, including painting of fittings and brackets, cutting and making good the walls : DSR 17.7 |
| 11 | White Vitreous China Wash basin size 550x400 mm with a pair of 15 mm C.P. brass pillar taps: DSR 17.7.3 |
| 12 | Providing & Fixing of SS AISI 304 ( 18/8) Kitchen Sink as per IS 13983 with CI Brackets and SS Plug 40 mm including painting of fittings and brackets, cutting and making good the walls where ever required : DSR 17.10 |
| 13 | Kitchen sink without drain board DSR 17.10.2 |
| 14 | 610 x 460 mm bowl depth 200 mm : DSR 17.10.2.2 |
| 15 | Providing and fixing of C.P. brass Jet with brass nossel steel flange & PVC flexible pipe complete in all respect DSR 17.16A |
| 16 | Providing and fixing P.V.C. waste pipe for sink or wash basin including P.V.C. waste fittings complete. : DSR 17.28 |
| 17 | Flexible Pipe : DSR 17.28.2 |
| 18 | 32 mm dia : DSR 17.28.2.1 |
| 19 | Providing and fixing soil, waste and vent pipes : DSR No. 17.35 |
| 20 | 100 mm diameter : DSR 17.35.1 |
| 21 | Sand cast iron S&S pipe as per IS: 3989. DSR 17.35.1.2 |
| 22 | 75 mm diameter : DSR 17.35.2 |
| 23 | Sand cast iron S&S pipe as per IS: 3989. DSR 17.35.2.2 |
| 24 | Providing and fixing plain bend of required degree. DSR No. 17.39 |
| 25 | 100 mm dia as per DSR No. 17.39.1 |
| 26 | Sand Cast Iron S&S as per IS 3989 DSR 17.39.1.2. |
| 27 | Providing and fixing collar DSR No. 17.57 |
| 28 | 75 mm dia as per DSR No. 17.57.2 |
| 29 | Sand Cast Iron S&S as per IS 3989 DSR 17.57.2.2 |
| 30 | Providing and fixing trap of self cleansing design with screwed down or hinged grating with or without vent arm complete, including cost of cutting and making good the walls and floors : DSR 17.60 |
| 31 | 100 mm inlet and 75 mm outlet : DSR 17.60.2 |
| 32 | Sand Cast Iron S&S as per IS: 3989 : DSR 17.60.2.2 |
| 33 | Providing and fixing G.I. pipes complete with G.I. fittings and clamps,i/c cutting and making good the walls etc. : DSR 18.10 |
| 34 | Internal Work - Exposed on Wall |
| 35 | 20 mm dia. nominal bore : DSR 18.10.2 |
| 36 | 32 mm dia. nominal bore : DSR 18.10.4 |
| 37 | P/F of G.I. pipes compelte with G.I. fitting and clamps including making good the wall etc. Concealed pipe including painting with anti corrosive bitumastic paint, cutting chases and making good the wall DSR 18.11 |
| 38 | 15 mm dia nominal bore DSR 18.11.1 |
| 39 | 20 mm dia nominal bore DSR 18.11.2 |
| 40 | Providing and fixing G.I. pipes complete with G.I. fittings including trenching and refilling etc. External work : DSR 18.12 |
| 41 | 20mm dia. nominal bore : DSR 18.12.2 |
| 42 | Providing and fixing Gun matel peat valve DSR 18.17.1 |
| 43 | size 20 mm dia DSR 18.17.1A |
| 44 | Providing and fixing uplasticised PVC connection pipe with brass unions : DSR 18.21 |
| 45 | 45 cm length : DSR 18.21.2 |
| 46 | 15 mm nominal bore : DSR 18.21.2.1 |
| 47 | Providing and fixing G.I. Union in G.I. pipe including cutting and threading the pipe and making long screws etc. complete (New work) : DSR 18.46 |
| 48 | 20 mm nominal bore : DSR 18.46.2 |
| 49 | Providing and placing on terrace (at all floor levels) polyethylene water storage tank ISI : 12701 marked with cover and suitable locking arrangement and making necessary holes for inlet, outlet and overflow pipes but without fittings and the base support for tank : DSR 18.48 |
| 50 | Providing and fixing C.P. brass bib cock of approved quality conforming to IS : 8931 : DSR 18.49 |
| 51 | 15 mm nominal bore : DSR 18.49.1 |
| 52 | Providing and fixing C.P. brass Long Body bib cock of approved quality conforming to IS : 8931 : DSR 18.51 |
| 53 | 15 mm nominal bore : DSR 18.51.1 |
| 54 | Providing and fixing C.P. brass stop cock (concealed) of standard design and of approved make conforming to IS:8931. DSR 18.52 |
| 55 | 15 mm nominal bore : DSR 18.52.1 |
| 56 | Providing and fixing C.P. brass angle valve for basin mixer and geyser points of approved quality conforming to IS: 8931 a ) DSR 18.53 |
| 57 | 15 mm nominal bore : DSR 18.53.1 |
| 58 | Providing and fixing PTMT Ball cock of size 15mm dia complete as par DSR 18.62.115 mm nominal bore, 105 mm long, weighing not less than 138 gms |
| 59 | Providing and fixing of C.P. Brass Extension Nipple Size 15 mm x 50 mm DSR 18.53A |
| 60 | Cutting holes up to 30x30 cm in walls including making good the same: DSR 18.76 |
| 61 | With F.P.S. bricks : DSR 18.76.1 |
| 62 | Cutting holes up to 15 x 15 cm in R.C.C. floor and roofs for passing drain pipe etc. and repairing the hole after insertion of drain pipe etc. with cement concrete 1:2:4 including finishing complete so as to make it leak proof . DSR 18.77 |
| 63 | Providing and fixing square-mouth S.W. gully trap class SP-1 complete with C.I. grating brick masonry chamber with water tight C.I. cover with frame of 300 x300 mm size (inside) the weight of cover to be not less than 4.50 kg and frame to be not less than 2.70 kg as per standard design: |
| 64 | 100x100 mm size P type |
| 65 | With common burnt clay F.P.S. (non modular) bricks of class designation 7.5 |
| 66 | Constructing brick masonry chamber for underground C.I. inspection Chamber and bends with bricks in cement mortar 1:4 (1 cement : 4 coarse sand) C.I. cover with frame (light duty) 455x610 mm internaldimensions, total weight of cover with frame to be not less than 38 kg (weight of cover 23 kg and weight of frame 15 kg), R.C.C. top slab with 1:1.5:3 mix (1 cement : 1.5 fine sand : 3 graded stone aggregate 20 mm nominal size), foundation concrete 1:5:10 (1 cement : 5 fine sand : 10 graded stone aggregate 40 mm nominal size), inside plastering 12 mm thick with cement mortar 1:3 (1 cement : 3 coarse sand), finished smooth with a floating coat of neat cement on walls and bed concrete etc. complete as per standard design: |
| 67 | Inside dimensions 600x 850 mm and 45 cm deep for pipe line with three or more inlets : |
| 68 | With common burnt clay F.P.S. (non modular) bricks of class designation 7.5 |
| 69 | Providing Drip seal joints to sand cast iron/centrifugally cast (spun) iron pipes and fittings of diameter : |
| 70 | 100 mm dia |
| 71 | 75 mm dia |
| 72 | Providing and fixing of G.I. elbow 80 mm x 32 mm of approved make |
| 73 | Construction of Curb consisting of cement concrete 1:2:4 excluding cost of C.P. hinged grating but including cost of sand bajri etc. |
| 74 | Providing and fixing of C.P. Steel Grating Heavy (With hole without hole) size 4\\" i/d |
| 75 | Providing and fixing of CP Brass/SS/ABS Soap Tray made of Plastic including glass bowl of approved make Jal Model No. 36540 or equialent Model of CERA /Kerovit/ ESSCO |
| 76 | Providing and fixing of CP Brass/SS Towel Ring with screws etc. to the satsifaction of EIC of approved make Jal Model No. 36524 Warna or equialent Model of CERA /Kerovit/ ESSCO |
| 77 | Providing and fixing of CP Brass/SS Towel Rail 600mm of with screws etc. to the satsifaction of EIC of approved make Jal Model No. 36520 Warna or equialent Model of CERA /Kerovit/ ESSCO |
| 78 | Providing and fixing of CP Brass/SS/ABS overhead shower with swiveling Joint , 125mm dia (min) with C.P Brass/ S.S Shower Arm and flange to the satsifaction of EIC of approved make ESSCO Model No. 536A & 542A or equialent Model of CERA /Kerovit/ Jal |
| 79 | Providing and fixing of C.P. brass Cup ( Heavy Duty ) of approved make |
| 80 | Supplying and fixing of RCC/SFRC Cover with frame for Gully Trap Complete of Approved make |
| 81 | Prov. & fixing of looking mirror of size 450x600mm made with 5mm thick (minimum) superior quality glass including cost of hard board, PVC beading and C.P. Screw etc. to satisfaction of EIC of approved make |
| 82 | Making provision for OWC to EWC with 4\\" C.I. bend, 4\\" C.I. coller 1 nos lead joints 2 nos, 4\\" C.I. pipe upto1\\"-0\\" long including dismentalling of OWC pan and floor complete in all respect |
| 83 | Providing and fixing of Tank Nipple 20mmdia Please Enable Macros to View BoQ information |