|
| 1 | Providing and fixing 2'-0” deep cupboard /cabinet consisting of 19mm thick commercial board and 6mm thick ply on back side, 4mm thick teak ply pasted on the exposed surface and making shelves in cabinet 0.8mm mica inside canbinet . The rate further includes the cost of lipping, piano hinges, cupboard lock, screws, nails, 2 nos. fancy s.s. handles, 2 nos. magnetic catchers, fevicol and painting two coats over one priming coat and preparation of surface on board and ply surface and spirit polishing on teak ply complete in position as per entire satisfaction of Engineer-in-charge. |
| 2 | Providing and laying Antiskid vitrified tiles in floor in diferent sizes (thickness to be specified by the manufacturer) with water absorption less than 0.08% and conforming to IS:15622, of approved brand & manufacturer, in all colours and shade. The tile are to be fixed with 3mm thick spacer. The tile are to be fixed with 3mm thick spacer. The grooves are to filled with cemenitious grout mixed with proporation of 0.90 kg grout and 0.10 kg of hardener for each kg of filling material complete in all respect and to entire staifaction of Engineer in Charge. Size of Tile 600x1200 mm |
| 3 | Providing and fixing Ist quality glazed ceramic wall tiles conforming to IS: 15622 (thickness to be specified by the manufacturer), of approved make, in all colours, shades except burgundy, bottle green, black of any size as approved by Engineer-in-charge, in skirting, risers of steps and dados, over 12 mm thick bed of cement mortar 1:3 (1 cement : 3 coarse sand). The tile are to be fixed with 3mm thick spacer. The grooves are to filled with cemenitious grout mixed with proporation of 0.90 kg grout and 0.10 kg of hardener for each kg of filling material complete in all respect and to entire staifaction of Engineer in Charge. size of tile 600 x 1200 mm |
| 4 | Providing and laying double charge vitrified floor tiles of specified size (thickness to be specified by the manufacturer) of 1st quality with water absorption less than 0.08% and conforming to IS : 15622, of approved make, in all colours and shades. The tile are to be fixed with 3mm thick spacer. The grooves are to filled with cemenitious grout mixed with proporation of 0.90 kg grout and 0.10 kg of hardener for each kg of filling material complete in all respect and to entire staifaction of Engineer in Charge. size of tile 600 x 1200 mm |
| 5 | Providing and laying double charge vitrified floor tiles of specified size (thickness to be specified by the manufacturer) of 1st quality with water absorption less than 0.08% and conforming to IS : 15622, of approved make, in all colours and shades in skirting, steps and risers. The tile are to be fixed with 3mm thick spacer. The grooves are to filled with cemenitious grout mixed with proporation of 0.90 kg grout and 0.10 kg of hardener for each kg of filling material complete in all respect and to entire staifaction of Engineer in Charge. size of tile 600 x 1200 mm |
| 6 | Dismantling of ceramic tiles or vitrified and plaster to making the surface clean for refixing the glazed tiles including removing of malba complete in all respect and to the entire satisfaction of the Engineer in charge. |
| 7 | Providing, manufacturing and installation of modular kitchen cabinets in the existing kitchen space. The kitchen cabinets are to be manufactured at factory by agency who have prior facility for manufacturing modular kitchen. The kitchen cabinets are to be made from 18mm thick HDHMR board to be provided with 1.00mm thick superior qualit high gloss laminate. The edges are to be provided with high quality PVC edge bending. The hardware and accessories for the cabinets are to be provided on make Hafele / Olive or equivalent. The cabinets shall have lighting provisions as per the approved pattern. The work also includes making holes for chimney and gas pipes. The work is to be undetaken as per the approval of the Hon'ble Judges of Punjab and Haryana High Court, for which the agency would be required to submit design details and any changes asked by the authorities shall have to be incorporated in the execution. All the work have to be executed as per the requirement and approval of the Hon'ble Judges of Punjab and Haryana High Court, complete in all respects and to the entire satisfaction of the Engineer in charge. |
| 8 | Brick work with common burnt clay F.P.S. (non modular) bricks of class designation 7.5 in superstructure above plinth level up to floor V level in all shapes and sizes in :Cement mortar 1:4(1 cement :4 coarse sand) |
| 9 | 12 mm cement plaster of mix:1:4(1 cement: 4 fine sand) |
| 10 | Demolishing brick work manually/ by mechanical means including stacking of serviceable material and disposal of unserviceable material within 50 metres lead as per direction of Engineer-in-charge.In cement mortar |
| 11 | Disposal of building rubbish / malba / similar unserviceable, dismantled or waste materials by mechanical means, including loading, transporting, unloading to approved municipal dumping ground or as approved by Engineer-in-charge, beyond 50 m initial lead, for all leads including all lifts involved. Please Enable Macros to View BoQ information |
