|
| 1 | Earth work in excavation by mechanical means (Hydraulic excavator) / manual means in foundation trenches or drains (upto and width on plan), including dressing of sides and ramming of bottoms, upto all leads & lifts including getting out the excavated soil and disposal of surplus excavated soil as directed i/c carriage of material in all leads and lifts. All kinds of soil. |
| 2 | Earth work in excavation by mechanical means (Hydraulic excavator)/manual means over areas (exceeding 30 cm in depth, 1.5 m in width as well as 10 sqm on plan) including getting out and disposal of excavated earth lead upto 50 m and lift upto 1.5 m, as directed by Engineer-in-charge inlcuding carriage of material in all leads and lifts. All kinds of soil. |
| 3 | Providing and laying in position cement concrete 1:5:10 (1 cement : 5 coarse sand): 10 graded stone aggregate 40 mm nominal of specified grade excluding the cost of centering and shuttering including carriage of material in all leads and lifts. All work up to plinth level : |
| 4 | Centering and shuttering including strutting, propping etc. and removal of form for: including carriage of material in all leads and lifts. Lintels, beams,plinth beams, girders, bressumers and cantilevers. |
| 5 | Reinforced cement concrete work in beams, suspended floors, roofs having slope up to 15° landings, balconies, shelves, chajjas, lintels, bands, plain window sills, staircases and spiral stair cases above plinth level up to floor five level, excluding the cost of centering, shuttering, finishing and reinforcement with 1:1.5:3 (1 Cement 1.5 oarse sand 3 graded stone aggregate 20 mm nominal size) including carriage of material in all leads and lifts. |
| 6 | Steel reinforcement for R.C.C work including straightening, cutting,bending, placing in position and binding all complete above plinth level including carriage of material in all leads and lifts.TMT bars of grade Fe-500D or more |
| 7 | Brick work with common burnt clay F.P.S. (non modular) bricks of class designation 7.5 in superstructure above plinth level up to floor V level in all shapes and sizes in :Cement mortar 1:6 (1 cement : 6 coarse sand) i/c carriage of material in all leads and lifts. |
| 8 | Half brick masonry with common burnt clay F.P.S. (non modular) bricks of class designation 7.5 in superstructure above plinth level up to floor all level Cement mortar 1:4 (1 cement :4 coarse sand) inlcuding carriage of material in all leads and lifts. |
| 9 | Providing wood work in frames of doors, windows, clerestory windows and other frames, wrought framed and fixed in position with hold fast lugs or with dash fasteners of required dia & length (hold fast lugs or dash fastener shall be paid for separately) i/c carriage of material in all leads and lifts. 2nd class deodar wood |
| 10 | Providing and fixing ISI marked flush door shutters conforming to IS : 2202 (Part I) decorative type, core of block board construction with frame of 1st class hard wood and well matched teak 3 ply veneering with vertical grains or cross bands and face veneers on both faces of shutters including carriage of material in all leads and lift. 35 mm thick including ISI marked Stainless Steel butt hinges with necessary screws |
| 11 | Providing and fixing 35 mm thick glazed shutters for windows and clerestory windows using 4 mm thick float glass panes, including ISI marked M.S. pressed butt hinges bright finished of required size with necessary screws i/c carriage of material in all leads and lifts. 2nd class deodar wood. |
| 12 | Providing and fixing wire gauge shutters using galvanized M.S. wire gauge of average width of aperture 1.4 mm in both directions with wire of dia 0.63 mm, for doors, windows and clerestory windows with hinges and necessary screws i/c carriage of material in all leads and lifts. 35 mm thick 2nd class deodar wood |
| 13 | Providing and fixing panelling and glazing in panelled and glazed shutters for doors, windows and clerestory windows (Area of opening for panel inserts excluding portion inside grooves or rebates to be measured). Panelling for panelled or panelled and glazed shutters 25 mm to 40 mm thick 2nd Class deodar wood i/c carriage of material in all leads and lifts. Float glass panes mm thick glass pane (weight not less than 10 kg per sqm) |
| 14 | Providing and fixing wooden moulded beading to door and window frames with iron screws, plugs and priming coat on unexposed surface etc. complete : 2nd class teak wood 50x20 mm i/c carriage of material in all leads and lifts. |
| 15 | Providing and fixing M.S. grills of required pattern in frames of windows etc. with M.S. flats, square or round bars etc. including priming coat with approved steel primer all complete i/c carriage of material in all leads and lifts. Fixed to window |
| 16 | Providing 40X5 mm flat iron hold fast 40 cm long including fixing to frame with 10 mm diameter bolts, nutsm and wooden plugs and embedding in cement concrete block 30X10X15 cm 1:3:6 mix (1 cement:3 coarse sand : 6 graded stone aggregate 20 mm nominal size) i/c carriage of material in all leads and lifts. |
| 17 | Providing and fixing stainless steel powder coated sliding door bolts of required color and shade with bolts and nuts, screws etc complete including carriage of material in all leads and lifts. 300x16 mm |
| 18 | Providing and fixing stainless steel powder coated tower bolts of required color and shade with bolts and nuts, screws etc complete including carriage of material in all leads and lifts. |
| 19 | 200X10 mm |
| 20 | 150X10 mm |
| 21 | Providing and fixing stainless steel powder coated handles to required colour and shade with necessary screws, etc. complete including carriage of material in all leads and lifts. |
| 22 | 125 mm |
| 23 | 100 mm |
| 24 | Providing and fixing bright finished brass hanging type floor door stopper with necessary screws, etc. complete including carriage of material in all leads and lifts. |
| 25 | Providing and fixing stainless steel hooks & eye to required shade with necessary screws etc. complete including carriage of material in all leads and lifts. |
| 26 | Providing and fixing powder coated aluminium sliding door bolts of required color and shade with bolts and nuts, screws etc complete including carriage of material in all leads and lifts. 250 x16 mm |
| 27 | Providing and fixing powder coated aluminium tower bolts of required color and shade with bolts and nuts, screws etc complete including carriage of material in all leads and lifts. 200 X10 mm |
| 28 | Providing and fixing powder coated aluminium handles to required colour and shade with necessary screws, etc. complete including carriage of material in all leads and lifts. 125 mm |
| 29 | Providing and fixing Ist quality ceramic glazed wall tiles conforming to IS: 15622 (thickness to be specified by the manufacturer), of approved make, in all colours, shades except burgundy, bottle green, black of any size as approved by Engineerin- Charge, in skirting, risers of steps and dados, over 12 mm thick bed of cement mortar 1:3 (1 cement : 3 coarse sand) and jointing with grey cement slurry @ 3.3kg per sqm, including pointing in white cement mixed with pigment of matching shade complete i/c carirage of material in all leads and lifts. |
| 30 | Providing and fixing 10mm thick anti skid water proof stain and impect resistent heavy duty vetrified tiles any size/colour manufactured of approved shade and colour in flooring, treads of steps and landings laid over 12mm thick cement mortar 1:3 (1 cement : 3 sand) jointed with cement slurry mixed with pigment to match the shade of tiles as required complete including carriage of material in all leads & lifts. |
| 31 | Providing and laying vitrified floor tiles in different sizes (thickness to be specified by the manufacturer) with water absorption less than 0.08% and conforming to IS: 15622, of approved make, in all colours and shades, laid on 20mm thick cement mortar 1:4 (1 cement : 4 coarse sand), jointing with grey cement slurry @ 3.3 kg/ sqm including grouting the joints with white cement and matching pigments etc. complete i/c carriage of material in all leads and lifts. Size of tile 600X600 mm |
| 32 | Providing and laying Vitrified tiles in different sizes (thickness to be specified by manufacturer), with water absorption less than 0.08 % and conforming to I.S. 15622, of approved make, in all colours & shade, in skirting, riser of steps, over 12 mm thick bed of cement mortar 1:3 (1 cement: 3 coarse sand), jointing with grey cement slurry @ 3.3 kg/ sqm including grouting the joint with white cement & matching pigments etc. complete i/c carriage of material in all leads and lifts. Size of tile 600X600 mm |
| 33 | Steel work welded in built up sections/ framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer using structural steel etc. as required i/c carriage of material in all leads and lifts. In gratings, frames, guard bar, ladder, railings, brackets, gates and similar works |
| 34 | Providing and fixing tiled false ceiling of specified materials of size 595x595 mm in true horizontal level, suspended on inter locking metal grid of hot dipped galvanized steel sections ( galvanized @ 120 grams/ sqm, both side inclusive) consisting of main \\"T\\" runner with suitably spaced joints to get required length and of size 24x38 mm made from 0.30 mm thick (minimum) sheet, spaced at 1200 mm center to center and cross \\"T\\" of size 24x25 mm made of 0.30 mm thick (minimum) sheet, 1200 mm long spaced between main \\"T\\" at 600 mm center to center to form a grid of 1200x600 mm and secondary cross \\"T\\" of length 600 mm and size 24x25 mm made of 0.30 mm thick (minimum) sheet to be interlocked at middle of the 1200x600 mm panel to form grids of 600x600 mm and wall angle of size 24x24x0.3 mm and laying false ceiling tiles of approved texture in the grid including, required cutting/making, opening for services like diffusers, grills, light fittings, fixtures, smoke detectors etc. Main \\"T\\" runners to be suspended from ceiling using GI slotted cleats of size 27 x 37 x 25 x1.6 mm fixed to ceiling with 12.5 mm dia and 50 mm long dash fasteners, 4 mm GI adjustable rods with galvanised butterfly level clips of size 85 x 30 x 0.8 mm spaced at 1200 mm center to center along main T, bottom exposed width of 24 mm of all T-sections shall be prepainted with polyester paint, all complete for all heights as per specifications, drawings and as directed by Engineer-in-charge i/c carriage of material in all leads and lifts.(a)12.5 mm thick fully Perforated Gypsum Board tile made from plasterboard having glass fibre conforming to IS: 2095 part I, of size 595x595 mm, having perforation of 9.7x9.7 mm at 19.4 mm c/c with center borders of 48 mm and the side borders of 30 mm, backed with non woven tissue on the back side, having an NRC (Noise Reduction Coefficient) of 0.79, with 50 mm resin bonded glass wool backing |
| 35 | 15 mm cement plaster on rough side of single or half brick wall of mix upto all heights/depths in mement Mortor 1:6 (1 cement: 6 coarse sand) including carriage of material in all leads & lifts |
| 36 | 20 mm cement plaster of mix : 1:6 (1 cement: 6 coarse sand) upto all heights including carriage of material in all leads & lifts. |
| 37 | Distempering with oil bound washable distemper of approved brand and manufacture to give an even shade: New work (two or more coats) over and including water thinnable priming coat with cement primer including carriage of material in all leads & lifts |
| 38 | Finishing walls with 100% Premium acrylic emulsion paint having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance, dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives.New work (Two or more coats applied @ 1.43 litre/ 10 sqm. Over and including priming coat of exterior primer applied @ 0.90 litre/10 sqm including carriage of material in all leads & lifts. |
| 39 | Finishing with Delux Multi surface paint system for interiors and exteriors using primer as per manufacturers specifications: including carriage of material in all leads and lifts. |
| 40 | Painting wood work with Delux Multi surface paint of required shade. Two or more more coat applied @0.90 ltr/10 Sqm over an under coat of primer applied @ 0.75 ltr/10 sqm of approved brand and manufature. |
| 41 | Painting steel work with Delux Multi surface paint to give an even shade. Two or more coat applied @0.90 ltr/10 sqm over an under coat of primer applied @0.80ltr/10 sqm of approved brand and manufacturer. |
| 42 | Providing and applying white cement based putty of average thickness 1mm, of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete including carriage of material in all leads & lifts. |
| 43 | Providing and fixing M.S welded wire mesh fabric fencing of required width including strengthening with 2 mm dia wire or nuts, bolts and washers as required complete as per the direction of Engineer-in-charge including carriage of material in all leads and lifts. Made of M.S wire of dia 3 mm |
| 44 | Providing and fixing water closet squatting pan (Indian type W.C. pan ) with 100 mm sand cast Iron P or S trap, 10 litre low level white P.V.C. flushing cistern, including flush pipe, with manually controlled device (handle lever) conforming to IS : 7231, with all fittings and fixtures complete, including cutting and making good the walls and floors wherever required including carriage of material in all leads and lifts. White Vitreous china Orissa pattern W.C. pan of size 580x440 mm with integral type foot rests |
| 45 | Providing and fixing white vitreous china pedestal type water closet (European type W.C. pan) with seat and lid, 10 litre low level white P.V.C. flushing cistern, including flush pipe, with manually controlled device (handle lever), conforming to IS : 7231, with all fittings and fixtures complete, including cutting and making good the walls and floors wherever required i/c carriage of material in all leads and lifts. W.C. pan with ISI marked white solid plastic seat and lid |
| 46 | Providing and fixing wash basin with C.I. brackets, 15 mm C.P. brass pillar taps, 32 mm C.P. brass waste of standard pattern, including painting of fittings and brackets, cutting and making good the walls wherever require i/c carriage of material in all leads and lifts. White Vitreous China Flat back wash basin size 550x 400 mm with single 15 mm C.P. brass pillar tap |
| 47 | Providing and fixing white vitreous china pedestal for wash basin completely recessed at the back for the reception of pipes and fittings i/c carriage of material in all leads and lifts. |
| 48 | Providing and fixing 8 mm dia C.P. / S.S. Jet with flexible tube upto 1 metre long with S.S. triangular plate to Eureopean type W.C. of quality and make as approved by Engineer - in - charge i/c carriage of material in all leads and lifts. |
| 49 | Providing and fixing P.V.C. waste pipe for sink or wash basin including P.V.C. waste fittings complete Flexible pipe i/c carriage of material in all leads & lifts.32 mm dia |
| 50 | Providing and fixing 600x450 mm beveled edge mirror of superior glass (of approved quality) complete with 6 mm thick hard board ground fixed to wooden cleats with C.P. brass screws and washers complete i/c carriage of material in all leads and lifts. |
| 51 | Providing and fixing 600X120X5mm glass shelf with edges round off, supported on anodised aluminium angle frame with C.P brass brackets and guard rail complete fixed with 40 mm long screws, rawl puls etc. complete i/c carriage of material in all leads and lifts. |
| 52 | Providing and fixing PTMT liquid soap container 109 mm wide, 125 mm high and 112 mm distance from wall of standard shape with bracket of the same materials with snap fittings of approved quality and colour, weighing not less than 105 gms i/c carriage of material in all leads and lifts. |
| 53 | Providing and fixing C.P. Brass towel ring make as approved by Engineer - in - charge i/c carriage of material in all leads and lifts. |
| 54 | Providing and fixing high pressure PVC spigot and socket, waste and ventilating pipes ISI marked including fixing with approved adhesive etc. complete i/c carriage of material in all leads and lifts. |
| 55 | 90 mm dia |
| 56 | 110 mm dia |
| 57 | Providing and fixing PVC plain bend ISI marked including fixing with approved adhesive etc. complete including carriage of material in all leads and lifts. |
| 58 | 90 mm dia |
| 59 | 110 mm dia |
| 60 | Providing and fixing PVC single equal branch with oval access door, ISI marked insertion rubber, washer 3 mm thick bolts and nuts complete including fixing eith approved adhesive etc. complete including carriage of material in all leads and lifts. |
| 61 | 90 mm dia |
| 62 | 110 mm dia |
| 63 | Providing and fixing PVC cowl complete including fixing with approved adhesive etc. complete. i/c carriage of magterial in all leads and lifts. 110 mm dia |
| 64 | 90 mm dia |
| 65 | 110 mm dia |
| 66 | Providing and fixing PVC floor trap ISI marked or self cleaning design including fixing eith approved adhesive, cost of cutting and making good the wall and floors etc. complete including carriage of material in all leads and lifts. 110X90 mm |
| 67 | Providing and fixing G.I. pipes complete with G.I. fittings and clamps, i/c cutting and making good the walls etc. i/c carriage of material in all leads and lifts. |
| 68 | 15 mm nominal bore. |
| 69 | 20 mm nominal bore. |
| 70 | Providing and fixing ball valve (brass) of approved quality, High or low pressure, with plastic floats complete including carriage of material in all leads and lifts. |
| 71 | 15 mm nominal bore |
| 72 | 20mm nominal bore |
| 73 | Providing and fixing G.I. Union in G.I. pipe including cutting and threading the pipe and making long screws etc. complete including carriage of material in all leads and lifts. |
| 74 | 15 mm nominal bore |
| 75 | 20mm nominal bore |
| 76 | Providing and fixing uplasticised PVC connection pipe with brass unions including carriage of material in all leads and lifts. 15 mm nominal bore (a) 45 cm length |
| 77 | Providing and placing on terrace (at all floor levels) polyethylene water storage tank, IS : 12701 marked, with cover and suitable locking arrangement and making necessary holes for inlet, outlet and overflow pipes but without fittings and the base support for tank i/c carriage of material in all leads and lifts. |
| 78 | Providing and fixing C.P. brass bib cock of approved quality conforming to IS standards and weighing not less than 810 gms i/c carriage of material in all leads and lifts. 15 mm nominal bore |
| 79 | Providing and fixing C.P. brass angle valve for basin mixer and geyser points of approved quality conforming to IS:8931 complete i/c carriage of material in all leads and lifts. 15 mm nominal bore |
| 80 | Constructing brick masonry manhole in cement mortar 1:4 ( 1 cement : 4 coarse sand ) with R.C.C. top slab with 1:1.5:3 mix (1 cement : 1.5 coarse sand : 3 graded stone aggregate 20 mm nominal size), foundation concrete 1:4:8 mix (1 cement : 4 coarse sand : 8 graded stone aggregate 40 mm nominal size), inside plastering 12 mm thick with cement mortar 1:3 (1cement : 3 coarse sand) finished with floating coat of neat cement and making channels in cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size) finished with a floating coat of neat cement complete as per standard design i/c carriage of material in all leads and lifts. Inside size 90x80 cm and 45 cm deep including SFRC M.H.. cover with frame (Heavy duty) 455x610 mm internal dimensions, total weight of cover and frame to be not less than 182 kg : With common burnt clay F.P.S. (non modular) bricks of class designation 7.5 |
| 81 | Providing and fixing square-mouth S.W. gully trap class SP-1 complete with C.I. grating brick masonry chamber with water tight C.I. cover with frame of 300 x300 mm size (inside) the weight of cover to be not less than 4.50 kg and frame to be not less than 2.70 kg as per standard design 100x100 mm size P type With common burnt clay F.P.S. (non modular) bricks of class designation 7.5 i/c carriage of material in all leads and lifs. |
| 82 | Providing and fixing 100 mm dia cromium plated stainless steel grating confirming to BIS specifcation including carriage of material in all leads and lifts. |
| 83 | Providing and fixing aluminium work for doors, windows, ventilators and partitions with extruded built up standard tubular sections/ appropriate Z sections and other sections of approved make conforming to IS: 733 and IS: 1285, fixing with dash fasteners of required dia and size, including necessary filling up the gaps at junctions, i.e. at top, bottom and sides with required EPDM rubber/ neoprene gasket etc. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, Aluminium snap beading for glazing / paneling, C.P. brass / stainless steel screws, all complete as per architectural drawings and the directions of Engineer-incharge. (Glazing, paneling and dash fasteners to be paid for separately) i/c carriage of material in all leads and lifts. |
| 84 | For fixed portion Polyester powder coated aluminium (minimum thickness of polyester powder coating 50 micron) |
| 85 | For shutters of doors, windows & ventilators including providing and fixing hinges/ pivots and making provision for fixing of fittings wherever required including the cost of EPDM rubber / neoprene gasket required (Fittings shall be paid for separately) Powder coated aluminium (minimum thickness of powder coating 50 micron) |
| 86 | Providing and fixing12 mm thick prelaminated particle board pressed three layer or graded wood particle board conforming to IS: 12823 Grade l Type ll, in panelling fixed in aluminum doors, windows shutters and partition frames with C.P. brass / stainless steel screws etc. complete as per architectural drawings and directions of engineer- in-charge i/c carriage of material in all leads and lifts. Pre-laminated particle board with decorative lamination on both sides Please Enable Macros to View BoQ information |
