|
| 1 | Rewiring for light point/ fan point/ exhaust fan point/ call bell point with 1.5 sq.mm FRLS PVC insulated copper conductor single core cable and 1.5 sq.mm FRLS PVC insulated copper conductor single core cable as earth wire in existing surface/recessed steel/PVC conduit including dismantling as required. |
| 2 | Supplying and drawing following sizes of FRLS PVC insulated copper conductor, single core cable in the existing surface/ recessed steel/PVC conduit as required. |
| 3 | a) 3 x 1.5 sq. mm |
| 4 | b) 3 x 6 sq. mm |
| 5 | c) 3 x 4 sq. mm |
| 6 | d) 6 x 4 sq. mm |
| 7 | Supplying and fixing brass batten/ angle holder including connection etc, as required. |
| 8 | Supplying and fixing following piano type switch/socket on the existing switch box /cover including connections etc. as required. |
| 9 | a) 5/6 A switch |
| 10 | b) 3 pin 5/6 A socket outlet |
| 11 | c) 15/16 A switch |
| 12 | d) 6 pin 15/16 A socket outlet |
| 13 | e) Telephone socket outlet |
| 14 | f) TV antenna socket outlet |
| 15 | g) Bell push |
| 16 | Supplying and fixing 5 A to 32 A rating, 240/415 V, 10 kA, \\"C\\" curve, miniature circuit breaker suitable for inductive load of following poles in the existing MCB DB complete with connections, testing and commissioning etc. as required. |
| 17 | a) Single pole (6 to 32 Amp) |
| 18 | b) Single pole and neutral (32 Amp) |
| 19 | Supplying and drawing following pair 0.5 mm dia FRLS PVC insulated annealed copper conductor, unarmored telephone cable in the existing surface/ recessed steel/PVC conduit as required.a) 1 Pair |
| 20 | Supplying and drawing co-axial TV cable RG-6 grade, 0.7 mm solid copper conductor PE insulated, shielded with fine tinned copper braid and protected with PVC sheath in the existing surface/ recessed steel/ PVC conduit as required. |
| 21 | Supplying and fixing single pole blanking plate in the existing MCB DB complete etc. as required. |
| 22 | Supplying and fixing of 3 mm thick phenolic laminated sheet complete as required |
| 23 | Providing and fixing MS cover of 1.6 mm thick having minimum size 230 X 390 for existing (2+4) way prewired distribution board with suitable slots cutting for MCBs in the MS Cover and two or more coats of phosphate powder coated paint i/c providing and fixing suitable bus bar for SPMCB & din bar for fixing of SPMCB in the existing DB neutral links & interconnections. connections etc required. |
| 24 | Supplying and fixing following way, single pole and neutral, sheet steel, MCB distribution board, 240 V, on surface/ recess, complete with tinned copper bus bar, neutral bus bar, earth bar, din bar, interconnnections, powder painted inbcluding earthing etc. as required. (But without MCB/RCCB/lsolator) 6 way, Double door |
| 25 | Supplying and fixing of following sizes of medium class PVC conduit along with accessories in surface/recess including cutting the wall and making good the same in case of recessed conduit as required. |
| 26 | Supplying and fixing of following sizes of steel conduit along with accessories in surface/recess including painting in case of surface conduit, or cutting the wall and making good the same in case of recessed as required. |
| 27 | 20 mm |
| 28 | 25 mm |
| 29 | LED Batten light ( System lumen efficiency>/= 105<120 lm/Watt) Supplying, installation,Testing& Commissioning of LED surface mounted Batten light of following body material and construction as per IS : 10322 with driver ( Replaceable ) as per the requirement with Driver effeciency>85%, operating violtage AC 140-270 volt, freq 50/60 hz, operating temp range -5 deg to 40 deg centigrade, internal surgge protection of 2.5 KV with short & open circuit protection THD <10%, PF >/= 0.95 , IP20. CRI >/=80, flicker free (flicker should be below 5%), life time (LED, driver &electrifcalcircuitary), of minimum 50000 burninig hours with , 70% off initial lumen maintained till life ends, CCT 3000 degreeK/ 4000degreeK/5700degreeK (As per ANSI biin), SDCM (Standargdevationcolor matching) <3, maximum power consumpion should not more than the specified rating and fixure shall be of relevant BIS than the specified rating andfixtureshallbeof relevant BIS standard name engraved/ embossing / screen printing on housing. mm FRLS/HEFR , PVC insulated copper conductor single core warranty. System lumen efficacy >/= 105 <120 lm/Watt output. LM79 & LM80 test report and all testing required for LED fixtures as per BIS shall be submitted . Shape size and CCT shall beas approved by engineer-in-charge as per reqquirement. (Thermal management: heat sink of aluminium housing such that LED junction temperature shall nott rise above 90degreeC.)Powder ciated CRCA sheet body (Thickness >/= 0.50mm)(18-22 Whatt) Please Enable Macros to View BoQ information |
