|
| 1 | Demolishing cement concrete nominal concrete 1:4:8 or leaner mix (i/c equivalent design mix) manually / by mechanical means including disposal of materials within 50 metres as per direction of Engr -in- Charge |
| 2 | Material & labour for plain cement concrete 1:2:4 of 25mm thick using 20mm graded aggregate laid as levelling course all as specified. |
| 3 | Material & labour for laying 1st quality ceramic glazed floor tiles Size 300x300x25mm conforming to IS : 15622 (thickness to be specified by the manufacturer ) of approved make in all colours of any size as approved by Engineer-in-Charge in over 20 mm thick bed of cement Mortar 1:4 (1 cement: 4 coarse sand) and jointing with grey cement slurry @ 3.3kg per sqm including pointing in white cement mixed with pigment of matching shade complete all as specified and as directed. |
| 4 | Material & labour for laying 1st quality ceramic glazed Wall tiles conforming to IS : 15622 (thickness to be specified by the manufacturer ) of approved make in all colours of any size as approved by Engineer-in-Charge in skirting, risers of steps and dados over 12 mm thick bed of cement Mortar 1:3 (1 cement: 3 coarse sand) and jointing with grey cement slurry @ 3.3kg per sqm including pointing in white cement mixed with pigment of matching shade complete all as specified and as directed. |
| 5 | Material & labour for laying vitrified tiles in different sizes ( size of tiles 600 x 600 mm) ( thickness to be specified by manufacturer) with water absorption less than 0.08% and conforming to IS : 15622, of approved make, in all colours & shade , over 20mm thick bed of cement mortar 1:4 ( 1 cement : 3 coarse sand), jointing with grey cement slurry @ 3.3 Kg / Sqm including grouting the joint with white cement & matching pigments etc complete all as specified and as directed. |
| 6 | Material & labour for laying Vitrified tiles Size of Tile 600x600 mm sizes (thickness to be specified by manufacturer), with water absorption less than 0.08 % and conforming to I.S. 15622, of approved make, in all colours & shade, in skirting, riser of steps, over 12 mm thick bed of cement mortar 1:3 (1 cement: 3 coarse sand), jointing with grey cement slurry @ 3.3 kg/ sqm including grouting the joint with white cement & matching pigments etc. complete all as specified and as directed. |
| 7 | Dismantling old plaster, skirting raking, and dado of wall tiles out joints and cleaning the surface for plaster from brick walls or concrete surfaces including disposal of rubbish to the dumping ground within 50 metres lead. |
| 8 | Material & labour for rendering 6 mm thick cement plaster on ceiling surfaces in cement mortar 1:3 finished fair and even with a floating coat of neat cement of mix complete all as specified and directed. |
| 9 | Material & labour for preparation of new plastered ceiling surfaces and apply three coats of white wash etc complete all as specified and directed. |
| 10 | Material & labour for rendering 15mm thick in fair faces of brick work or concrete surfaces in CM 1:4 finished even and smooth in fine sand complete all as specified. |
| 11 | Material & labour for rendering 12 mm thick in fair faces of brick work or concrete surfaces in CM 1:6 finished even and smooth in fine sand complete all as specified. |
| 12 | Material & Labour for finishing the newly plastered wall by applying Two coats 100 % premium acrylic emulsion paint @ 1.67 litre/ 10 Sqm having VOC less than 50 gm/ litre and UV resistance as per IS 15489 : 2004, Alkali & fungal resistance, dirt resistance exterior paint of required shade ( Company Depot tinted ) with silicon additives over and including priming coat of exterior primer applied @ 0.90 litre / 10 Sqm complete all as specified and directed by Engr-in-charge. |
| 13 | Material & Labour for Distempering with 1st quality acrylic distemper (ready mixed) having VOC content less than 50 gms/litre, of approved manufacturer, of required shade and colour with two or more coats on new work complete, as per manufacturer's specification over including 2mm thick internal wall care putty finish complete all as specified and directed by Engr-in-charge. |
| 14 | Material & labour for removing white or colour wash by scrapping and sand papering and preparing the surface smooth including necessary repairs to scratches etc. complete and White washing (one or more Coats) with lime to give an even shade |
| 15 | Demolishing brick work (In cement mortar) manually/ by mechanical means including stacking of serviceable material and disposal of unserviceable material within 50 metres lead as per direction of Engineer-in-charge. |
| 16 | Material & labour for Tile brick masonry with common burnt clay F.P.S. (non modular) tile bricks of class designation 10 in superstructure above plinth level up to floor V level in cement mortar 1:6 (1 cement : 6 coarse sand) complete all as specified and as directed. |
| 17 | Material & Labour for complete removal of existing treatment on surfaces of wall and applying Two coats of 100% Premium acrylic emulsion paint having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance, dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives @ 1.67 litre/ 10 sqm over and including priming coat of exterior primer applied @ 0.90 litre/ 10 sqm complete all as specified and as directed |
| 18 | Material & labour for complete removal of existing treatment and applying two coat of oil bound distemper all as specified and directed by Engineer in charge. |
| 19 | Material & labour for preparation of old treated surface of wall by washing rubbing down & applying one coat of Oil bound distemper using roller and brush to paint complete all as specified and directed. |
| 20 | Material & labour for preparation of old painted wooden surfaces of any description over 10cm width or girth and applying one coat of synthetic enamel paint complete all as specified and directed. |
| 21 | Material & labour for 3mm thick wall care putty on wall complete all as specified and directed. |
| 22 | Supply only integral water proofing compound |
| 23 | Dismantling doors, windows and clerestory windows (steel or wood) shutter including chowkhats(of area 3 sq. metres and below), architrave, holdfasts etc. complete and stacking within 50 metres lead |
| 24 | Material & labour for providing wood work second class teak wood in frames of doors, windows, clerestory windows and other frames, wrought framed and fixed in position with hold fast lugs or with dash fasteners of required dia & length (hold fast lugs or dash fastener shall be paid for separately). |
| 25 | Supply and fixing paneling or paneling Second class teak wood and glazing in paneled or paneled and glazed shutters for doors, windows and clerestory windows (Area of opening for panel inserts excluding portion inside grooves or rebates to be measured). Paneling for paneled or paneled and glazed shutters 25 mm to 40 mm thick and Fly proof stainless steel grade 304 wire gauge with 0.5 mm dia. wire and 1.4mm wide aperture with matching wood beading |
| 26 | Supply and fixing paneled or paneled and glazed shutters 35mm thick shutter kiln seasoned selected planks of second class teakwood for doors, windows and clerestory windows, fixing with butt hinges of required size with necessary screws, excluding panelling which will be paid for separately, all complete as per direction of Engineer-in-charge. (Note:-Butt hinges and necessary screws shall be paid separately) |
| 27 | Supply and fixing factory made panel PVC door shutter 30mm thick consisting of frame made out of M.S. tubes of 19 gauge thickness and size of 19 mm x 19 mm for styles and 15x15 mm for top & bottom rails. M.S. frame shall have a coat of steel primers of approved make and manufacture. M.S. frame covered with 5 mm thick heat moulded PVC 'C' channel of size 30 mm thickness, 70 mm width out of which 50 mm shall be flat and 20 mm shall be tapered in 45 degree angle on both side forming styles and 5 mm thick, 95 mm wide PVC sheet out of which 75mm shall be flat and 20 mm shall be tapered in 45 degree on the inner side to form top and bottom rail and 115 mm wide PVC sheet out of which 75 mm shall be flat and 20 mm shall be tapered on both sides to form lock rail. Top, bottom and lock rails shall be provided both side of the panel. 10 mm (5 mm x 2 ) thick, 20 mm wide cross PVC sheet be provided as gap insert for top rail & bottom rail, paneling of 5 mm thick both side PVC sheet to be fitted in the M.S. frame welded/ sealed to the styles & rails with 7 mm (5 mm+2 mm) thick x 15 mm wide PVC sheet beading on inner side, and joined together with solvent cement adhesive. An additional 5 mm thick PVC strip of 20 mm width is to be stuck on the interior side of the 'C' Channel using PVC solvent adhesive etc. complete as per direction of Engineer-in-charge, manufacturer's specification & drawing. |
| 28 | Supply and fixing factory made P.V.C. door frame of size 50x47 mm with a wall thickness of 5 mm, made out of extruded 5mm rigid PVC foam sheet, mitred at corners and joined with 2 Nos of 150 mm long brackets of 15x15 mm M.S. square tube, the vertical door frame profiles to be reinforced with 19x19 mm M.S. square tube of 19 gauge, EPDM rubber gasket weather seal to be provided through out the frame. The door frame to be fixed to the wall using M.S. screws of 65/100 mm size, complete as per manufacturer’s specification and direction of Engineer-in-Charge. |
| 29 | Supply and fixing powder coated aluminium work for fixed portion of doors, windows, ventilators and partitions with extruded built up standard tubular sections /appropriate Z sections and other sections of approved make conforming to IS : 733 and IS : 1285, fixing with dash fasteners of required dia and size, including necessary filling up the gaps at junctions i.e at top, bottom and sides with required EPDM rubber/ neoprene gasket etc. Aluminium section shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, Aluminium snap beading for glazing / paneling CP brass / stainless steel screws, all complete as per architectural drawings and the directions of Engr -in- Charge. (Glazing, paneling and dash fasteners to be paid for separately) (minimum thickness of powder coating 50 micron). |
| 30 | Supply and fixing powder coated aluminium work for shutters of doors, windows (sliding) & ventilators and partitions with extruded built up standard tubular sections /appropriate Z sections and other sections of approved make conforming to IS : 733 and IS : 1285, fixing with dash fasteners of required dia and size, including necessary filling up the gaps at junctions i.e at top, bottom and sides with required EPDM rubber/ neoprene gasket etc. Aluminium section shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, Aluminium snap beading for glazing / paneling CP brass / stainless steel screws, including Supply & Fixing hinges/ pivots and making provision for fixing of fittings wherever required including the cost of EPDM rubber / neoprene gasket required all complete as per architectural drawings and the directions of Engr -in- Charge. (Fittings, Glazing, paneling and dash fasteners to be paid for separately) (minimum thickness of powder coating 50 micron). |
| 31 | Supply and fixing glass panes 5.5mm thick with putty and glazing clips in steel doors, windows, clerestory windows, all complete with |
| 32 | Supply and fixing Stainless steel wire gauge (Grade-304) aperture 1.4 mm and 0.50mm dia wire complete all as specified |
| 33 | Supply and fixing 200x10mm aluminium tower bolts, ISI marked, anodised (anodic coating not less than grade AC 10 as per IS : 1868 ) transparent or dyed to required colour or shade, with necessary screws etc. complete |
| 34 | Supply & Fixing bright/matt finished Stainless Steel 125mm handles of approved quality & make with necessary screws etc all complete. |
| 35 | Supply & Fixing ISI marked MS pressed butt hinges 100 x 58 x 1.90mm bright finished with necessary screws etc complete |
| 36 | Supply & Fixing 300x16mm aluminium sliding door bolts, ISI marked anodised (anodic coating not less than grade AC 10 as per IS : 1868), transparent or dyed to required colour or shade, with nuts and screws etc. complete |
| 37 | Supply & Fixing aluminium Twin rubber stopper hanging floor door stopper, ISI marked, anodised (anodic coating not less than grade AC 10 as per IS : 1868) transparent or dyed to required colour and shade, with necessary screws etc. complete. |
| 38 | Supply & Fixing bright finished brass helical door spring (superior quality). |
| 39 | Material & Labour for fixing door chowkhats in existing opening including embedding chowkhats in floors or walls cutting masonry for holdfasts, embedding hold fasts in cement concrete blocks of size 15 x 10 x 10 cm with cement concrete 1:3:6 (1 cement : 3 coarse sand : 6 graded stone aggregate 20 mm nominal size), painting two coats of approved wood preservative to sides of chowkhats and making good the damages to walls and floors as required complete, including disposal of rubbish to the dumping ground, all complete as per direction of Engineer-in-Charge. |
| 40 | Material & Labour for painting two or more coat on new wood work with synthetic enamel paint of approved brand and manufacture to give an even shade all as specified.. |
| 41 | Material & Labour for painting to old steel surfaces of any description over 10cm in width or girth to otherwise described applying tow coats of synthetic enamel paint over red oxide including preparation all as specified.. |
| 42 | Supply & Fixing 18mm thick both sides Pre-laminated cement bonded wood particle board as per IS:15786:2008 of approved brand and shade with suitable full threaded steel screws etc. in partitions, boxes, shelves, racks and cupboard, kitchen cabinet under kitchen counter etc. all complete as per direction of Engineer-in-charge (Note: Fittings to be paid separately). |
| 43 | Supplying and fixing new wooden 2nd class teak wood fillets wherever necessary complete all as specified |
| 44 | Supplying and fixing 1mm thick 35 mm wide bright finished stainless steel piano hinges complete all as specified |
| 45 | Supply & Fixing 50 mm bright finished brass cup board or wardrobe knob of approved quality with necessary screws |
| 46 | Supply & Fixing special quality chromium plated brass cupboard locks of size 50 mm with six levers of approved quality including necessary screws etc. complete. |
| 47 | Supply & Fixing 100mm Stainless Steel fancy handles for kitchen cabinet |
| 48 | Supply & Fixing 100x10mm aluminium tower bolts, ISI marked, anodised (anodic coating not less than grade AC 10 as per IS:1868) transparent or dyed to required colour or shade, with necessary screws etc. complete : |
| 49 | Supply & Fixing 18 mm thick gang saw cut, mirror polished, premoulded and prepolished granite, machine cut for kitchen platforms, vanity counters, window sills, facias and similar locations of required size, approved shade, colour and texture laid over 20 mm thick base cement mortar 1:4 (1 cement : 4 coarse sand), joints treated with white cement, mixed with matching pigment, epoxy touch ups, including rubbing, curing, moulding and polishing to edges to give high gloss finish etc. complete at all levels of Granite stone slab colour black, Cherry/Ruby red area of slab over 0.50 sqm complete all as specified and directed. |
| 50 | Supply & fixing White vitreous china water closet squatting pan Orissa pattern W.C Pan of size 580x440 mm (Indian type) along with \\"S\\" or \\"P\\" trap including dismantling of old WC seat and \\"S\\" or \\"P\\" trap at site complete with all operations including all necessary materials, labour and disposal of dismantled material, all complete as per the direction of Engineer-in charge. |
| 51 | Supply & Fixing white vitreous china pedestal type Water closet pan with ISI marked white solid plastic seat and lid, including 10 litre low level white P.V.C. flushing cistern, flush pipe, with manually controlled device (handle lever), conforming to IS : 7231, with all fittings and fixtures complete, including cutting and making good the walls and floors wherever required all complete as per the direction of Engineer-in charge. |
| 52 | Supply & Fixing unplasticised PVC connection pipe with brass unions 45 cm length and 15 mm dia nominal bore complete all as specified and directed |
| 53 | Supply & Fixing C.P. brass bib cock 15 mm nominal bore of approved quality conforming to IS:8931 complete as per the direction of Engineer-in charge. |
| 54 | Supply & Fix in repairs C.P. Brass stop cock (concealed) 15 mm dia long shank screwed both side for iron pipe or for union and fixed all as s specified. |
| 55 | Supply & Fixing C.P. brass angle valve 15mm nominal bore for basin mixer and geyser points of approved quality conforming to IS:8931 |
| 56 | Supply & Fixing C.P. brass shower rose 150 mm diameter with 15 or 20 mm inlet |
| 57 | Supply & Fixing mirror of superior glass (of approved quality) and of required shape and size with plastic moulded frame of approved make and shade with 6 mm thick hard board backing Rectangular shape 453x357 mm (outer dimensions) complete all as specified and directed |
| 58 | Supply & Fix in repair wash basin mixer, chromium plated, brass for WHB for hot & cold water and fixed, 15mm bore of pipe, complete all as specified and directed. |
| 59 | Supply & Fixing CP Brass Single lever telephonic wall mixer 15mm nominal dia of quality & make as approved by Engineer in charge. |
| 60 | Dismantling 15 to 40 mm dia G.I. pipe Internal Work- Exposed on wall including stacking of dismantled pipes (within 50 metres lead) as per direction of Engineer-in-Charge. |
| 61 | Supply & Fixing G.I. Pipes 15 mm dia nominal bore complete with G.I. fittings and clamps, i/c making good the walls etc. concealed pipe, including painting with anti corrosive bitumastic paint, cutting chases and making good the wall complete all as specified and as directed. |
| 62 | Supply & Fixing G.I. Pipes 20 mm dia nominal bore complete with G.I. fittings and clamps, i/c making good the walls etc. concealed pipe, including painting with anti corrosive bitumastic paint, cutting chases and making good the wall complete all as specified and as directed. |
| 63 | Disconnecting damaged overhead/terrace PVC water storage tank of any size from water supply line and removing from the terrace including shifting at ground level as per direction of Engineer-in-charge. |
| 64 | Providing and placing on terrace (at all floor levels) polyethylene water storage tank, white colour, IS: 12701 marked , with cover and suitable locking arrangements and making necessary holes for inlet, outlet and overflow pipes but without fittings and the base support for tank |
| 65 | Supply & Fixing 20 mm nominal bore, 120 mm long, weighing not less than 198 gms PTMT Ball cock of approved quality, colour and make complete with Epoxy coated aluminium rod with L.P./ H.P.H.D. plastic ball |
| 66 | Supply & Fixing 20 mm dia Gunmetal gate valve with wheel complete all as specified |
| 67 | Supply & Fixing PTMT towel rail complete with brackets fixed to wooden cleats with CP brass screws with concealed fittings arrangements of approved quality and colour 600mm long |
| 68 | Supply & fix vitreous china wash basin, flat back, size 550 x 400mm excluding taps ,waste pipe, including cutting for and pinning in ends of brackets or erecting stand and including bracket fixed in repair including pillar taps 'Fancy type\\" cast copper alloy with capstan heads chromium plated screwed down high pressure with or without lettered hot or cold with long screwed shanks and flynuts screwed for 15mm dia iron pipe complete all as specified and as directed by Engineer in Charge. |
| 69 | Supply & fix Health faucet chromium plated including flexible pipe, screwed for iron pipe and fixed for 15 mm bore dia (Fancy type) all as specified. |
| 70 | Supply & fix in repairs PVC cabinet mirror for bathroom size 400x300x150mm suitable for to keep the bathroom items all as specified. Make: PRAYAG Cat Part No 554 or equivalent. |
| 71 | Dismantling 75 to 80mm dia CI or asbestos rain water pipe with fittings and clamps including stacking the materials within 50 metres lead |
| 72 | Dismantling 100mm dia C.I.pipe or asbestos rain water pipe with fittings and clamps including stacking the material within 50 metres lead |
| 73 | Supply & Fixing on wall face unplasticised Rigid Single socketed 75mm dia PVC rain water pipes conforming to IS : 13592 Type A, including jointing with seal ring conforming to IS : 5382, leaving 10 mm gap for thermal expansion complete all as specified and as directed |
| 74 | Supply & Fixing on wall face unplasticised Rigid Single socketed 110mm dia PVC rain water pipes conforming to IS : 13592 Type A, including jointing with seal ring conforming to IS : 5382, leaving 10 mm gap for thermal expansion complete all as specified and as directed |
| 75 | Supply & Fixing on wall face UPVC Coupler 75mm for unplasticised Rigid PVC rain water pipes conforming to IS : 13592 Type A, including jointing with seal ring conforming to IS : 5382, leaving 10 mm gap for thermal expansion complete all as specified and as directed |
| 76 | Supply & Fixing on wall face UPVC Coupler 110mm for unplasticised Rigid PVC rain water pipes conforming to IS : 13592 Type A, including jointing with seal ring conforming to IS : 5382, leaving 10 mm gap for thermal expansion complete all as specified and as directed Please Enable Macros to View BoQ information |
