|
| 1 | M&L for preparation of plastered or unplastered old decorated surfaces by complete removal of existing treatment by scrapping with Trucare Wall Sander : L-01/H-01 (having mechanical vaccum mechanism) having RPM not less than 1500, sand pad of 80 grit having dia of 7\\"/9\\" to make the surface free from dust, loose paint etc or equivalent makes viz Xpress sanding machine having suction vaccum bag or by manual scrapping tools where mechanical removal is not possible , filling of holes and cracks with with suitable material like cement or plaster of paris etc and thereafter applying two coat of oil bound distemper over a coat of primer on walls/ceiling including applying 1-2mm thick wall care putty over disturbed surface complete all as specified and as directed. Note : (a) Each stage of complete removal of existing treatment and preparation of surfaces after applying putty shall be got approved from Engg-In-Charge in stage passing register before applying the finishes coat.(b) Material shall be procured from manufacturer and work shall be got executed through authorised applicators of manufacturer. |
| 2 | M&L for preparation(complete removal of existing treatment) of old decorated external wall/ceiling surface of existing treatment by scrapping with Trucare Wall Sander : L-01/H-01 (having mechanical vaccum mechanism) having RPM not less than 1500, sand pad of 80 grit having dia of 7\\"/9\\" to make the surface free from dust, loose paint etc or equivalent makes viz Xpress sanding machine having suction vaccum bag or by manual scrapping tools where mechanical removal is not possible and applying Two coats of wheather proofing exterior acrylic emulsion paint over a coat of primer premium quality on wall/ceiling surface including applying 1-2mm thick wall care putty over disturbed surface during preparation of any reason, sand papering thus make surface smooth upto 4th storey buildings complete all as specified and as directed.Note : (a) Each stage of complete removal of existing treatment and preparation of surfaces after applying putty shall be got approved from Engg-In-Charge in stage passing register before applying the finishes coat.(b) Material shall be procured from manufacturer and work shall be got executed through authorised applicators of manufacturer. |
| 3 | M&L for preparation of old treated plastered or unplastered surfaces of walls including cornices by brooming down or steel wire brushing, scraping down, smoke soot, moulds, moss and efflorescent salts and trading oil and greasy spot, filling cracks/holes with putty and applying one coat of distemper oil emulsion on walls complete . |
| 4 | M&L for preparation of old treated plastered or unplastered surfaces of ceiling including cornices by brooming down or steel wire brushing, scraping down, smoke soot, moulds, moss and efflorescent salts and trading oil and greasy spot, filling cracks/holes with putty and applying one coat of distemper oil emulsion on ceiling complete . |
| 5 | Taking down cement plaster or cement lime plaster on brick,concrete or stone surfaces including raking out joints, hacking for key, scrubbing down with water etc complete all as specified |
| 6 | M&L for 5 mm thick cement plaster on fair faces of brick work or concrete surfaces in cement mortar 1:3 in ceiling including finishing surface even and smooth without using extra cement. |
| 7 | M&L for 10 mm thick cement plaster on fair faces of brick work or concrete surfaces in cement mortar 1:6 on walls including finishing surface even and smooth without using extra cement |
| 8 | M&L for 15 mm thick plaster in cement mortar (1:4) on brick or concrete surfaces including rendering on fins, fascias, chajja, parapets etc and finishing the surfaces even and fair (without using extra cement) complete all as specified. |
| 9 | M&L for preparation of newly plastered surface of wall and applying two coats of oil bound distemper over one coat of primer complete all as specified. |
| 10 | M&L for preparation of newly plastered surface of ceiling and applying two coats of oil bound distemper over one coat of primer complete all as specified |
| 11 | M&L for preparation of newly plastered surface of wall and applying Two coats of wheather proofing exterior acrylic emulsion paint over a coat of primer premium quality complete all as specified |
| 12 | M&L for providing 3mm thick wall care putty on wall before applying oil bound distemper and making the surface uniform all as specified. |
| 13 | M&L for providing 3mm thick wall care putty on ceiling before applying oil bound distemper and making the surface uniform all as specified. |
| 14 | M&L for preparing of old surfaces and applying one coats of plastic emulsion paint (royal shyne/equvalent) , complete all as specifed and directed by engr -in charge |
| 15 | M & L for preparing old surfaces and applying one coat of floor tile guard paint as approved complete all as specified and as directed. |
| 16 | M & L for applying Bees-Wax polishing over granite stone flooring including removing dust/sweeping all as specified. |
| 17 | M & L for applying one coat of French polishing on surfaces of any description, width or girth including filling the dents / holes with filler and applying one coat of sealer and touchup with french polish incl cleaning, preparing the surface of old wooden surfaces and all as specified and directed by Engr-in-Charge. |
| 18 | M & L for preparation of old painted cement concrete surfaces applying one coat of synthetic enamel paint complete all as specified and directed Engr-in-Charge. |
| 19 | M&L for preparation of old painted concrete surface plain/kerb stone moulded over 10cm width or girth by cleaning, brushing etc and applying one coat of synthetic enamel paint all as specified and as directed. |
| 20 | Taking up or down steel tubing and connections 15mm dia pipes including cleaning for refixing or removal to store complete all as specified and as directed. |
| 21 | Taking up or down steel tubing and connections 20mm dia pipes including cleaning for refixing or removal to store complete all as specified and as directed. |
| 22 | S & F 15mm dia tubes medium grade, galvanized, with all fittings such as sockets, bends, elbows, tees etc, concealed/surface fixed to walls and ceiling or laid in floors complete all as specified and directed. |
| 23 | S & F 20 mm dia tubes medium grade, galvanized, with all fittings such as sockets, bends, elbows, tees etc, concealed/surface fixed to walls and ceiling or laid in floors complete all as specified and directed. |
| 24 | Cutting chases, pinning in brick walls, making good to facings where required and pointing in cement mortar 1:3 to ends or edges of landing, steps, cills, sunshades, shelves, lintels, etc; and cuttings chases for concealed water tubing or concealed conduit wiring, etc and making good, cutting not exceeding 10 cm girth all as specified and directed |
| 25 | Dismantling of existing water tanks of steel/PVC/AC of capacity exceeding 250 liters but not exceeding 500 litres complete all as specified. |
| 26 | Dismantling water tanks of capacity exceeding 500 and not exceeding 1000 ltrs all as specified and directed by Engineer - in - Charge. |
| 27 | S&F for rotational moulded polyethylene water storage tanks 500 ltrs capacity (cylinderical vertical with closed top) hoisted and fixed in position all as per SSR Part I complete all as specified. |
| 28 | S & F rotational moulded polyethylene water storage tanks (cylindrical vertical with closed top) hoisted and fixed in position all as specified in SSR part I of capacity 1000 Litres all as specified and directed by Engineer - in - Charge . |
| 29 | S&F in repair ball valves high pressure of PTMT with epoxy coated aluminium rod and high density plastic ball with minimum weight 210 gm screwed for 20mm bore dia iron pipe supplied and fixed in repairs complete all as specified and as directed. |
| 30 | S&F in repair for 20mm dia gun metal gate valve, with iron wheel head, screwed both ends for iron pipes complete all as directed. |
| 31 | S&F in repair vitreous china Counter top Wash hand basin (White) of size (570x420x195 mm) mm complete all as specified. (Cat No. FLS-WHT-5601) Make: Jaquar/Equivalent |
| 32 | S&F in repair vitreous china Rimless Single Piece WC (White) With PP Soft Close Slim Seat Cover, Hinges, Dual Flush Cistern Fittings, Fixing Accessories And Accessories Set, Size: 370x690x750 mm, S Trap- 300 mm complete all as specified. (Cat No.CNS-WHT-853S300SPPSM) Make: Jaquar/Equivalent |
| 33 | S & F in repairs Vitreous China Half stall urinal of size 380x405x509mm White complete including providing CP waste coupling and fixing plugs, bedding urinal against wall in cement mortar 1:2, securing urinal to plugs with and including 60 mm long brass screws, pointing around urinal back in cement complete . Make parryware, Jaquar / Cera / Eqvlt |
| 34 | S & F in repairs of sensors assembly for auto flush urinal code EFS N-PCB(DC)Assy new ,parryware make or equivalent and making good all as specified and directed by Engr-in-Charge. |
| 35 | S & F in repairs of sensors of valve assembly for auto flush urinal code SMART EFS SOLENOID VALVE Assy ,parryware make or equivalent and making good all as specified and directed by Engr-in-Charge. |
| 36 | S & F in repairs of sensors of power assembly for auto flush urinal code C741199 Assy power sourse for SMART HAWNE TAP A/C ,parryware make or equivalent and making good all as specified and directed by Engr-in-Charge. |
| 37 | S&F in repair Health faucet (ABS Body) mild steel chromium plated suitable for 15mm dia pipe with 1.25 mtr long flexible tube and ABS wall hook including making connections and mixed in position complete all as specified and directed. |
| 38 | S&F in repair Toilet paper holder with flat recessed type stainless steel complete all as specified. |
| 39 | S & F in repairs PVC connection 15mm size with PTMT nuts of length 450mm all as specified and directed. |
| 40 | S & F in repair brass CP Wall mixer with L bend incl (provn for over head shower), 15 mm bore chromium plated fancy type for mixing hot & cold water screwed down for iron pipe complete all as specified and directed (Cat Part No F2002401 Cera or equivelent) |
| 41 | S&F Single Lever 3-inlet Diverter Exposed parts kit chrome finish consisting of Operating Lever, Cartridge Sleeve, Wall Flange (with Seals), Button Assembly Sleeve and Button Cap , 15 mm nominal bore complete (Cat No.OPP-CHR-15193NKPM) Make: Jaquar/Equivalent |
| 42 | S & F in repair brass CP kitchen sink mixer for mixing hot & cold water screwed down for iron pipe, 15mm dia chromium plated fancy type complete all as specified and directed |
| 43 | S&F in repair Exposed Part Kit of Single Lever Basin Mixer Wall Mounted chrome finish consisting of Operating Lever, Cartridge Sleeve, Wall Flange, Nipple & Spout 15 mm nominal bore (Cat No.ARI-CHR-39233NK) Make: Jaquar/Equivalent |
| 44 | S&F in repair 32 mm dia brass chromium plated bottle traps for wash basins with inlet and outlet screwed for pipe or connections including necessary packing, union and cap and fixed complete all as specified. |
| 45 | S&F in repair angular two way angle cock with wall flange, 15 mm bore cast copper alloy, chromium plated, screwed down high pressure with crutch or butterfly handle screwed both ends for iron pipes or for unions and fixed complete all as specified. |
| 46 | S & F in repairs bib taps, long body cast copper alloy, chromium plated, with crutch or butterfly handle, screwed down, screwed for 15 mm bore iron pipe or for brass ferrule complete all as specified. |
| 47 | S & F in repairs 15mm dia stop valves/angle valve, cast copper alloy, chromium plated, fancy type, screwed down, high pressure, with crutch or butterfly handle, screwed both ends for 15 mm bore iron pipe or for brass ferrule complete all as specified. |
| 48 | S & F in repairs chromium plated shower rose 125mm size incl shower arm casted 190 mm long flat shape for wall mounted showers with flange incl fixing to steel pipe or union all as specified and directed. |
| 49 | S&F in repair Soap dish of chromium plated or stainless steel fixed to wall with chromium plated brass screws all as specified and directed |
| 50 | S & F in repairs 600 x 450 mm size beveled edge mirror of selected quality glass mounted on 6mm thick AC building board or commercial plywood and fixed with wooden plugs with chromium plated brass screws and cup washers all as specified and directed. |
| 51 | S&F in repair Corner glass shelf, 5mm thick glass, 9\\" wide, fixed with suitable mild steel CP brackets, nuts & bolts all as specified and as directed. Make: Onida/ High Life/ Eagle |
| 52 | S & F in repair Brass chromium plated, tubular towel rails 20 mm dia, D- type, 60 cm long between flanges, completed all as specified and directed. |
| 53 | S & F in repairs stainless steel sinks with drainage board made out of 1.00 mm thick sheet for kitchen with plugs, washers, waste pipes, including bedding in cement mortar to dwarf wall or including fixing cast iron cantilever brackets and connecting union to pipe overall size 915 mm x 460 mm with bowl size 410mm x 330mm x 160mm, with and including PVC waste pipe and CP waste coupling 32 mm dia and making good to disturbed surfaces, fixed in repairs, complete all as specified. |
| 54 | M&L in repairs for 12 mm thick prelaminated particle board , interior graded, preliminated one side with decorative choice lamination and other side balancing white laminations, aluminium/ tibmer frame and wall surface all as specified and directed. |
| 55 | M&L fixed in repairs for 12 mm thick prelaminated both side , interior graded, preliminated both side decorative choice lamination fixed to aluminium/ tibmer frame and wall surface all as specified and directed. |
| 56 | M&L in repairs for 09 mm thick prelaminated particle board , interior graded, preliminated one side with decorative choice lamination and other side balancing white laminations, fixed to aluminium/ tibmer frame wall surface all as specified and directed. |
| 57 | M&L in repairs for 09 mm thick prelaminated particle board , interior graded, preliminated both side with decorative choice lamination fixed to aluminium/ tibmer frame wall surface all as specified and directed. |
| 58 | M&L in repairs for 12 mm Veneered decorative plywood, grade 1 (with BWR resin) with decorative face veneers on one face (One Side Teak) fixed with screws to timber frame as directed. |
| 59 | Taking down eaves gutters and rainwater pipes (any size or pattern), including all fittinges, heads, shoes, bends, swan-necks etc as specified. |
| 60 | S & F 110 mm bore PVC (SWR) Soil, waste and vent pipes single socketed in any length with rubber ring joints fixed to walls/trenches complete all as specified & directed. |
| 61 | S & F in repair 110 mm bore PVC (SWR) bends with/without door of any radius complete all as specified & directed. |
| 62 | S & F in repair 110 mm bore PVC (SWR) junctionsingle, (single T), equal or unequal with/without door of any radius complete all as specified & directed. |
| 63 | Dismantling floor,hearth or wall tiling including cement mortar bedding (but not backing) removing serviceable tiles to store and rubbish off the permises complete all as specified and as directed |
| 64 | M&L for nonskid coloured ceramic tiles 7mm thick area of each tiles exeeding 0.11 sqm but not exceeding 0.18 sqm in floors/skirting etc. set and jointed neat cemet slury and pointed in coloured cement to match complete all as specified and as directed. (Notes : Screed bed measured and paid separately) |
| 65 | M&L for double charged Vitrified Ceramic tiles 9-10 mm thick (Square/rectangular) of light Shade , polished, area of each tile exceeding 0.36 sqm and n. exc 0.72 sqm and , fixed in floor/skirting etc over set and jointed in neat cement slurry and pointed in coloured cement to match with coloured tiles complete all as specified. |
| 66 | M&L for Coloured Vitrified Ceramic tiles 9-10 mm thick (Square/rectangular) of Light Shade , polished, area of each tile not exceeding 0.36 sqm, fixed in floor/skirting etc over set and jointed in neat cement slurry and pointed in coloured cement to match with coloured tiles complete all as specified. |
| 67 | M & L for glazed ceramic coloured tiles of size 450X 350X 7mm/ 600x300x7 mm thick as in vertical surfaces, set and jointed in neat cement slurry and pointed in white or coloured cement to match of tiles, complete all as specified and directed. |
| 68 | Demolition of stone slabs and tiles of any description or thickness in floors/walls, aprons etc laid bedded and pointed in any mortar. |
| 69 | M&L 20-25mm thick machine cut kota stone slab as in flooring, steps of stair(treads), over cement screed base laid and jointed with grey cement slurry mixed with pigment to match the sahde of the slab including rubbing and polishing incl complete all as specified and as directed. |
| 70 | M&L 20-25 mm thick machine kota stone slab as in skirting/dado, riser of steps, laid over cement screed and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing, complete all as specified and directed. |
| 71 | M&L for 18-20 mm thick Granite tiles machine cut , bedded and jointed with grey cements slurry and pointed with white or colour cement with admixture of pigment to match the shade of granite stone including grinding & polishing slab over screed bed or bedding layer of mortar 15 mm thick in cement mortar (1 : 4) laid complete all as specified. |
| 72 | M&L for 18-20 mm thick machine-cut mirror polished marble stone in flooring/skirting in required size and pattern,bedded and jointed with grey cements slurry and pointed with white or colour cement with admixture of pigment to match the shade of marble stone including grinding & mirror polishing slab over screed bed or bedding layer of mortar 15 mm thick in cement mortar (1 : 4) laid complete all as specified and as directed. |
| 73 | M&L for screed bed or bedding layer of mortar 15 mm thick in cement mortar (1:6) for bedding of tiles complete all as specified. |
| 74 | M&L for 10 mm thick rendering in cement motar (1:4) on vertical surface for bracking of tiles etc complete all as specified. |
| 75 | M&L for screed bed or bedding layer of mortar 20 mm thick in cement mortar (1:6) for bedding of tiles complete all as specified. |
| 76 | M&L for 15 mm thick rendering in cement motar (1:4) on vertical surface for bracking of tiles etc complete all as specified. |
| 77 | Demolition of cement concrete (unreinforced) of any description including cast-in-situ terrazzo (below or above ground level), not exc. 15 cm thickness, including removal of rubbish outside MoD land, complete all as specified. |
| 78 | M&L for 25mm thick plain cement concrete type B-1 (1:2:4) using 20mm gradedstone aggregate as in sub base all as specified and directed. |
| 79 | M&L for 40mm thick plain cement concrete type B-1 (1:2:4) using 20mm gradedstone aggregate as in sub base all as specified and directed. |
| 80 | M&L for 100 mm thick Cement concrete type C1, 1:3:6 (using 40 mm graded aggregate) in foothpaths and hard standing finish even and fair without using extra cement complete all as specified and directed. |
| 81 | S&F in repair stainless steel (grade 304) railing made of hollow tubes, channels, plates etc, including embedded in cement concrete 1:3:6 to floors and welding, grinding ,buffing, polishing and making curvature(wherever required) and fitting the same with necessary stainless steel nuts and bolts complete, including fixing the railing with necessary accessories like SS ball caps ,floor caps etc complete all as specified and as directed. |
| 82 | S&F in repair stainless steel (grade 304) chain including necessary welding at joints, grinding to SS railing etc including taking down old UNSV SS chain etc all as specified and as directed. |
| 83 | S&F in repair for stainless steel letter, arrow of size of height exc 250mm and n.exc 300 mm of sectional area not less 900 Sqmm, fixed to any surface including necessary fixing arrangements with chemical /adhesive including screwing with stainless steel screws etc., complete all as specified and as directed. Please Enable Macros to View BoQ information |
