|
| 1 | Demolition of cement concrete (unreinforced) in windows around the cill level n exc 15 cm thickness complete all as specified and directed |
| 2 | Demolition of brick work or stone/ boulder masonary built in cement mortar including all quions, arches, pillars, etc complete all as specified and directed. |
| 3 | Demolition of reinforcement cement concrete above the ground floors n exc 15 cm thickness (Reinforcement cut as required to facilitate demolition) such as RCC Almirah, platform, chajjas etc complete all as specified and directed. |
| 4 | Dismantling of tile, floor, hearth, walls, roof tiles,kota stones etc including bedding (but not backing), and rubbish off permises complete all as specified and directed. |
| 5 | M&L Brick work with Fly Ash bricks straight or curved on plan exc 6m mean radius built in CM 1:6 complete all as specified and directed. |
| 6 | M&L for PCC 1:2:4 type B1 using 20 mm or 12.5 mm graded stone aggregate as in around the windows cill and jams as per site requiment, including necessary form work etc,surface finished even and fair complete all as specified and directed |
| 7 | M&L Rendering on fair faces of brick work or concrete surfaces of wall 15 mm thick in CM 1:6 and to be finished even and smooth without using extra cement complete all as specified and directed. |
| 8 | M&L for vitrified ceramic tiles dark shade (square/rectangular) of 8 to 10 mm thick , area of each tiles size 600mm x 1200 mm as in floor etc set and jointed in neat cement slurry and pointed in as per required coloured cement to match the surface of tile complete all as specified and directed |
| 9 | M&L for screed bed or bedding layer of mortar 15mm thick for laying floor finishes in CM 1:6 for laying of floor tiles complete all as specified and directed. |
| 10 | M&L for PCC 1:2:4 type B-0 using 12.50 mm graded aggregate as in sub-base flooring surface finished even and rough to receive the topping layer complete all as specified and directed. |
| 11 | M&L for 8 to 10 mm thick dark shade ceramic tiles in Dado/ vertical surfaces, tiles size 600mm x 1200 mm as in wall set & jointed in neat cement slurry and pointed in coloured cement to match complete all as specified and directed. |
| 12 | M&L for Rendering 10 mm thick in cement mortar 1 : 6 for fixing of wall tiles complete all as specified and directed. |
| 13 | Taking down MS Windows, ventilators and including MS Grill/ chowkats or frames with shutters of any description (without taking off shutters from the frames) area n. exc 1.5 Sqm each and removing to store complete all as specified and directed. |
| 14 | Taking down chowkhat or frames exc 1.50 Sqm and n exc 4 Sqm each with shutters (without taking off shutters from the frame) and removing to store complete all as specified and directed |
| 15 | Providing and fixing factory made uPVC white colour casement (Openable) Door made of extruded profile wilh wall thickness of 2.3mm ( + -0.2mm). Window profile with hollow section with mitlti chamber, frame (60mm x 58mm), sash (60mm x 78mm). T profile (One vertical length in between two shutters) (60mm x 74mm). Glazing bead (35mm x 20mm) will be mitered cut and fusion welded at all corners, including drilling ol holes for fixing hardware and drainage of water etc., making arrangement for fixing of hardware. EPDM gasket 1.2 + -0.2mm thick galvanized steel Frame (28mm x 21.5mm), sash (31mm x 27mm), T profile (27mm x 17mm) to be inserted in required profile, frame will be fixed to the wall wilh 8mm x 100mm long fasteners. Hardware: [casement door handle made of zinc alloyed (white powder coated). Corner striker. Secondary Strikers. Cylinder. Door transmission gear made of mild sleel with multi point locking system with strikes. 3D Hinges of zinc alloyed (white powder coated) and including 5.5 mm thick glass selected with quality and 15 mm uPVC panel board all as specified and directed by Engr-in-Charge. |
| 16 | S&F factory made UPVC white colour Slinding Window three track made of extruded profiles with wall thickness of 2.3mm (±0.2mm), Window profile with hollow section with multi chamber, frame (88mm X 52mm), sliding sash (42mm X 67mm), Sliding mesh sash (42x57mm), sliding interlock (one vertical length in each shutter) (45.5mm X 28mm), glazing bead (24.5mm X 16mm) will be mitered, cut and fusion welded at all corners, including railing of holes for fixing hardware and drainage of water etc, making arrangement for fixing of hardware, EPDM gasket 1.2 ± 0.2mm thick galvanised steel frame (30mm x 18mm) 2 Nos, sliding sash (30mm X 18mm) 2 Nos, sliding mesh sash (26mm X 10mm), profile to be inserted in required profile, frame will be fixed to the wall with 8mm x 100mm long fasteners. Haradware (tough lock of zinc alloyed (white powder coated), steel roller system, stainless steel wire cloth 0.36mm nominal dia of wire and average width of apaerture 1.40mm and required accessories and including 5.50 mm glass with selected quality. all as specified and directed by Engr-in-Charge. |
| 17 | S&F 7mm thick aluminium grills of make \\"Decogrill' model DG 104 surrounded by aluminium 'C' channel with mesh size 99 X 105 mm all as specified and directed. |
| 18 | M&L 16 to 18 mm thick Granite (of any type) work (table rubbed and polished) in treads & risers of steps, skirting, dado, jambs, window-cills, jams etc and like in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite and also including granite anti slip grooves (minimum 3 grooves for one tread) complete all as specified and directed by Engr-in-Charge. |
| 19 | Rounding to edges of stone slabs one edge such as steps or treads in stair case complete all as specified and directed. |
| 20 | S&F 12 mm thick plain Gypsum Board False Ceiling with GI frame including all necessary drilling cutting to fix electric items complete all as specified and directed with following:- (a) GI Grid channel 30x25x20 mm of 24 gauge fixed with rawl plug and screw 450 mm centre to centre alongwith perimeter walls. (b) GI channel made to shape 50x40x40 mm of 24 gauge placed @ 600 mm centre to centre from perimeter at wall except long wall (in one span). (c) GI intermediate runners of size 45x10x10 mm of 24 gauge fixed @ 1200 mm centre to centre leaving frame of one side walls (in other span). (d) GI sheet 25 mm wide and 20 mm gauge suspended fixed with steel fastner to roof ceiling and 1200 mm centre to centre including pluging of RCC Slab/GI based shed/truss/purleen. (e) 12 mm thick gypsum board filling joints with POP and finishing complete with two coat of plastic emulsion paint over one coat of primer on ceiling and including 2mm thickness putty. |
| 21 | M&L for 5 mm thick PVC sheet fillet of width 35 mm for wall panelling inclusive of fixing on to wall to make PVC frame as per specification and drawing complete all as specified and directed. |
| 22 | S&F solid PVC wall lining consisting of 5mm thick single side prelam PVC sheet used instead of plain colour sheet inclusive of solvent cement and fixing at site on PVC frame as per specification and complete all as specified and directed. |
| 23 | M&L for preparation of old/new plastered surfaces of walls or concrete surfaces and applying 3 mm thick wall care putty complete all as specified & directed. |
| 24 | M&L for complete removal of existing treatment and applying two coats of OBD over a coat of alkali resistant primer on wall complete all as directed by Engineer-in-Charge. |
| 25 | M&L applying two coats of acrylic exterior weather proof emulsion paint over a coat of exterior primer on newly plastered wall surfaces/ old decorated wall surfaces, in case of old decorated wall surfaces includes complete removal of existing wall finish of any type with wire brush, brooming, dusting & finally washing with water to clean the surface absolutely free from any kind of foreign materials and making good minor cracks etc complete all as specified and directed. |
| 26 | M&L and repair of patch work not exceeding 1 sqm each place as per site requirement & Rendering 15 mm thick in cement mortar 1:4, in two layers (1st layer 10 mm thick rendering coat and 2nd layer 5 mm thick finishing coat) on brick work or concrete surfaces, second layer (finishing coat) mixed with liquid water proofing compound @ 200 ml / 50 Kg bag of cement as per manufacturer's instructions and finish the surfaces even and smooth without using extra cement including WPC complete all as specified and directed. |
| 27 | Taking down eaves gutters and rain water pipes of any size or pattern including all fittings etc complete all as specified and directed. |
| 28 | S&F PVC (SWR) pipes 110mm bore single socketed in any length with rubber ring joints laid in floors, trenches complete all as specified and directed. |
| 29 | S&F PVC (SWR) pipes 110mm bore single socketed in any length with rubber ring joints fixed to wall complete all as specified and directed. |
| 30 | S&F Stack clamps made out of 50x5 mm flat iron, 16mm dia round iron stays including bolts & nuts and securing ends of stays to wall or roof for 110 mm PVC pipe complete all as specified and directed. |
| 31 | S&F PVC(SWR) bends, any radius of 110 mm bore without access door complete all as specified and directed. |
| 32 | S&F PVC(SWR) bends, any radius of 110 mm bore with access door complete all as specified and directed. |
| 33 | S&F PVC (SWR) branch pieces, single (equal or un equal) , ordinary or inverted (spigot or socket type) or with parralled branches of 110 mm dia with access door complete all as specified and directed. |
| 34 | S&F in repair CP grating 100 mm dia with waste hole (minimum weight 40 gm) complete all as specified and directed |
| 35 | S&F in repair bib tap cast copper alloy chromium plated, fixed to 15 mm dia GI tube/CPVC pipe all as specified and directed. |
| 36 | S&F in repair pillar tap cast copper alloy with capstan head chromium plated crewed down high pressure, 15 mm dia complete all as specified and directed |
| 37 | M&L for Making corner/gully trap fillets with Polymer modified cementitious (PMC) mortar (PMC:C:M : 1:2:4 by weight) at all joints of horizontal and vertical surface and doing bore packing with PMC mortar complete all as specified and directed by Engr-in-Charge |
| 38 | M&L for the joints of pipes and concrete/masonry are to be sealed with epoxy putty or epoxy mortar (PMC:C :: 1:2 by weight) and the same is semi-rounded upto 5mm above surface level all along the periphery of PVC pipes complete all as specified and directed by Engr-in-Charge |
| 39 | Taking down carefully copper/aluminium point wiring (light,fan,bell, socket or power) complete,including fixtures and fittings such as switches, ceiling roses, holders,regulators, sockets, tube light fittings i.e removing materials to store for keeping in safe custody or for taking credit (credit for above items should be made for conditions separately ) and including making good the disturbed surfaces to match with existing surface and colour shade with proper putty for smooth finishing without andulations complete all as specified and directed. |
| 40 | Material and labour for cutting chasing,pinning in brick/ stone/concrete wall at any height wall cutting and chases for concealed wiring PVC pipe laying of 20/25 mm dia pipes,water tubing,etc and making good to facings where required and pointing in cement motor 1:3 to ends or edges of landings,wall surfaces etc,cutting not exc 10 cm girth and including making good the disturbed surfaces to match with existing surface and colour shade with proper putty for smooth finishing with existing wall complete all as specified and directed |
| 41 | Material and labour for point wiring complete with 1.5 sqmm, PVC insulated, FRLSH type, ISI marked,conforming to IS-694/1990(as amended) unsheathed, multistranded, single core, copper conductor cable 1100 volts grade using approved colour coding drawn through and including PVC concealed conduit 20/25 mm dia medium grade (MMS) and incliding all accessories such as bend,tee,elbows,reducers,bell mouth tube ends,short pieces & junction boxes with PVC covers etc in walls / roofs / floors / ceiling etc and including cutting, chasing work at any height with flush mounting GI sunken boxes having top,bottom,side/back side knockout for conduit entry from any direction made out of 1.2mm thick, 60mm deep for housing modular switches,sockets,fan regulators, Indicators,blank plate etc and incl Providing modular white cover plate with inner frame suitable as per switch modules and including PVC insulated multistranded copper conductor 1.5 sqmm FRLSH type unsheathed (Green colour),single core cable as earth wire connecting to common earth dolly for further connection to ceiling rose and earth terminal and including making good the disturbed surfaces to match with existing surface and colour shade with proper putty for smooth finishing with existing wall complete all as specified and directed for One light point controlled by one 10amps switch, one way |
| 42 | All as per item no. 41 but for One ceiling/ exhaust fan point controlled by one switch 10 amps,one way |
| 43 | All as per item no. 41 but for One 5 pin 6 amps socket point controlled by one 10 amps switch on independent board . |
| 44 | All as per item no. 41 but forOne 5 pin 10 amps socket point controlled by one 10 amps switch on same board . |
| 45 | All as per item no. 41 but for One bell/buzzer point controlled by one bell push. |
| 46 | All as per item no. 41 but for One light point controlled by two 2 way switches. |
| 47 | All as per item no. 41 but for point wiring with 2.5 sqmm and earth conductor of size 2.5 sqmm complete all as specified and directed for One 6 pin 16/20amps socket outlet point controlled by one 16/20 amps switch on independent board. |
| 48 | All as per item no. 48 but for One 6 pin 16/20 amps socket outlet point controlled by one 16/20 amps switch on same board. |
| 49 | All as per item no. 41 but for above ,but point wiring with 4.0 sqmm and earth conductor of size 4 sqmm complete all as specified and directed. |
| 50 | Supply & fixing modular type switch 10 Amps, single pole,1way,1 module,240V,AC, with small indicator ISI Marked complete all as specified and directed. |
| 51 | Supply & fixing modular type switch 10 Amps ,2way,single pole,1 module,240V,AC, with small indicator ISI Marked complete all as specified and directed. |
| 52 | Supply & fixing modular type bell push 10 Amps,1 module, single pole, 240 volts,AC, with embosing bell simble & indicator, ISI Marked complete all as specified and directed. |
| 53 | Supply & fixing modular type switch 16/20 Amps, single pole,1way,1 module,240V,with small indicator,AC, ISI Marked complete all as specified and directed. |
| 54 | Supply & fixing modular type socket shuttered type 10 Amps, 2/3 Pin combined 2 module,240V,AC ISI Marked complete all as specified and directed. |
| 55 | Supply & fixing modular type socket 16/20 Amps, 6 Pin combined shuttered socket 2 module,240V,AC ISI Marked complete all as specified and directed |
| 56 | Supply & fixing red color lighting indication lamp switch, single pole,240volts,AC,50 Hz suitable for 1 module ISI Marked complete all as specified and directed. |
| 57 | Supply & fixing modular type step fan speed regulator 120W, 2 module,230volts,AC, 360 degree rotation 1 to 8 steps, ISI Marked complete all as specified and directed. |
| 58 | Supply and fix call bell AC, 230 Volts single pole, multi music type best and superior quality, ISI marked, as approved type complete all as specified and directed. |
| 59 | Supply & fix angle lamp holder latest model, insulated PVC out side body and brass inside holder with back plate for batten fittings/bulbs complete all as specified and directed. |
| 60 | Supply & fix ceiling rose, 3 terminal ,PVC/polycarbonate body ISI marked, complete all as specified and directed |
| 61 | Supply & fix decorative box type 20 watt light fitting, end caps, pre-wired and including providing single/double side LED tube light (tube rod) white/warm 20 watt-01 No made of aluminium extrusion with high efficient LED driver,IP-20, Tube efficiency of 100lm/w, including PVC/Wooden round/square block -02 Nos and connected with LED fitting to ceiling rose and including removing old unserviceable fitting complete all as specified and directed. |
| 62 | S&F recess mounted box module type suitable to integrated with various 40/42 |
| 63 | Supply & fixing and sheet metal enclosure with acrylic door type, DD/AD ,415 volts AC,VTPN DB, 4 way,8+12 modules, flush mounting with 200amps copper busbar, 2 neutral/earth bars links and MCCB incomer, and MCB SPN/SP/TPN as outgoing and complete for IP43 DBs protection and including removing old unserviceable DBs and incl making good the disturbed surfaces to match with existing surface and colour shade complete all as specified and as directed. |
| 64 | Supply & fix and in repair sheet metal enclosure acrylic door 240 volts AC,SPN distribution board 12 way for flush mounting with 100amps copper busbar,neutral bar,earth bar suitable for MCB incomer of rating upto 100Amps ,MCB SPN/DP, and MCB SP as outgoing and complete connecting cable links with top and bottom removable gland plates with IP 43 DBs protection and including making good the disturbed surfaces to match with existing surface and colour coat all as specified and as directed. |
| 65 | Supply & fix and sheet metal enclosure, with acrylic type double door, 240 volts AC,SPN,DB, 4 way, flush mounting with 100amps copper busbar,neutral bar,earth bar and MCB incomer,MCB SPN/DP, and MCB SP as outgoing for IP 43& IP54 DBs protection nd including removing old unserviceable DBs making good the disturbed surfaces to match with existing surface and colour shade complete all as specified and as directed. |
| 66 | Supply & fix MCB SP 6 to 32 Amps 10 KA,\\"C\\" series,AC,240Volts,50Hz , ISI marked and including removing old unsv items complete all as specified and directed |
| 67 | Supply & fix in repairs and MCB SPN 32 to 40 Amps 10 KA,\\"C\\" series,AC,240Volts,50Hz, ISI marked and including removing old unsv items complete all as specified and directed. |
| 68 | Supply & fix and MCB SPN 40 to 63 Amps 10 KA,\\"C\\" series,AC,240Volts,50Hz, ISI marked and including removing old unsv items complete all as specified and directed.\ |
| 69 | Supply & fix and MCB TPN 40 63 Amps 10 KA,\\"C\\" series,AC,415Volts,50Hz, ISI marked and including removing old unsv items complete all as specified and directed. |
| 70 | Supply and fix MCCB, 100 Amps,4 pole,415 Volts , 16/18KA thermal magnetic type with necessary lugs,thimbles, nuts bolts and washers and including removing old unserviceable item complete all as specified and as directed |
| 71 | M & L for sub main wiring complete with 4 run of 10 sqmm single core copper conductor (ISI marked)cable 1100 volts grade, ISI marked,FRLSH type (conforming to IS-694/1990 as amended) PVC insulated, unsheathed,flexible,multi stranded colour coded cables drawn through and including rigid PVC conduit concealed ISI marked medium grade(MMS) with all connected accessories such as Bend,Tee,Elbow,Short peices etc concealed in wall/roofs/floors and including one run of 10 sqmm single core copper conductor cable flexible, PVC insulated, unsheathed, multistranded, 1100 volts grade, ISI marked,FRLSH type as earth continuity conductor connected to common earth dolly and including removing old unsv submain wiring making good the disturbed surfaces to match with existing surface and colour shade and complete all as specified and directed.Note : - Four run of 10 sqmm single core copper conductor cable and one run of 10 sqmm single core copper conductor cable as earth continuity and one run of PVC conduit shall be measured as one unit. |
| 72 | All as per ditto item No .71, but 2 run x 10 sqmm+1 run 10Sqmm earth wire complete all as specified and directed. |
| 73 | All as per ditto item No .71, but 2 run x 6 sqmm+1 run 6Sqmm earth wire complete all as specified and directed. |
| 74 | All as per ditto item No 71, but 2 run x 4 sqmm+1 run 4Sqmm earth wire complete all as specified and directed. |
| 75 | All as per ditto item No 71, but 2 run x 2.5 sqmm+1 run 2.5Sqmm earth wire complete all as specified and directed. |
| 76 | All as per ditto item No 71, but 2 run x 1.5 sqmm+1 run 1.5 Sqmm earth wire complete all as specified and directed. |
| 77 | Supply and fix new ceiling fan with blades, down rods, and connected accessories, 230 V, 1200 mm sweep,copper winding with squirrel cage induction motor, anti dust painted, dust free,high speed. Star rated complete all as specified and directed. |
| 78 | Supply and fix suitable for flush mounting sheet steel enclosure metal clad plug and socket including MCB SP 20 Amps, 10KA 'C 'series, 230 Volts,50Hz suitable for AC's/Geysers complete all as specified and directed. |
| 79 | Supply and fix PVC casing and caping of size not less than 25X25 mm width with all accessories such as tees,corners,overlaping connector etc for encasing existing telephone cables, LAN cables,TV Cable wires etc along the wall/ceiling/roof etc complete all as specified and as directed. |
| 80 | Supply and fix PVC casing and caping of size not less than 50X50 mm width with all accessories such as tees,corners,overlaping connector etc for encasing existing telephone cables, LAN cables,Cable wires etc along the wall/ceiling/roof etc complete all as specified and as directed. |
| 81 | S&F for PVC non-metalic rigid conduit incl boxes,junctions boxes 1 to 4 way & terminals but incl of all tees,bends,elbows,reducers,bell mouth tube ends and fixing accessories such as couplers lock nuts,saddles,pipes hookes etc ISI marked heavy duty of size 20/25 mm dia for LAN,telephone and TV connections including cutting,chasses and making good disturbed surfaces to match with existing surfaces with plaster/putty and including removing of old unserviceable item complete all as specified and directed. |
| 82 | S&F down rod made of GI pipe medium grade drilled hole Please Enable Macros to View BoQ information |
