|
| 1 | Taking down chowkhats or frame with shutter (without taking off shutter from the frame) area n.exc 1.5 Sqm each, complete all as specified and directed. |
| 2 | Taking down chowkhat or frame with shutter (without taking off shutter from the frame) area exc 1.5 Sqm but n.exc 4 Sqm each, complete all as specified and directed. |
| 3 | Dismantling of floor, hearth or wall tiling laid, bedded & pointed in any mortar including demolition of cement mortar bedding or backing coat, including removal of debries to outside MOD land complete all as specified and directed. |
| 4 | Demolition of cement concrete in ground floor and pavings not exc 15 cm thickness below or above ground level, including removal of debries to outside MOD land complete all as specified and directed. |
| 5 | Demolition of brick / stone / PCC block masonry built in cement mortar including all quoins, pillars, arches etc. including removal of debries out side MD land, complete all as specified and directed. |
| 6 | Demolition of reinforced cement concrete of any description and in any position and( reinforcement not cut in chajja/fins to facilitate demolition) including removal of debries to outside MOD land complete all as specified and directed. |
| 7 | Dismantling Stone slabs (Kota Stone) of any description or thickness in floors, aprons etc complete all as specified and directed. |
| 8 | M&L for 100mm thick cement concrete type D-2, 1:4:8 (40mm graded aggregate) as in Sub base all as specified and directed. |
| 9 | 25mm Sand filling under floors or in foundations including watering and consolidation |
| 10 | M & L Providing and laying 80mm thick factory made chamfered edge cement concrete paver block of M-30 grade with approved colour, design & pattern as in footpath, parks, lawns, drive ways or light traffic parking etc., of required strength, thickness & size/ shape, made by table vibratory method using PU mould, laid in required colour & pattern over and including 50mm thick compacted bed of coarse sand,compacting and proper embedding/ layingof inter locking paver blocks into the sandbedding layer through vibratory compaction by using plate vibrator, filling the joints with fine sand and cutting of paver block as per required size and pattern, finishing and sweeping extra sand; complete. |
| 11 | M&L Hard core, broken stone/ boulders to gauge n exc 63 mm |
| 12 | S&F FRP (Fiberglass reinforced plastics) chajja 4mm thick of fibreways or equivalent in required colour size and design made by resin transfer moulding (RTM) machine technology having smooth gradual slope curvature for easy drainage of water and duly reinforced by 2 Nos vertically and 1 Nos horizontally 50x2 mm thick M S flat with 12mm in built hole for grouting on the existing wall along with the 50mm flanges duly inserted and sealed in the wall complete in one single piece casted monolithically including all necessary fittings. The FRP Chajja should be manufactured using unsaturated polyster resin as per IS:6746 duly reinforced with fiberglass chopped strand mat (CSM) as per IS:11551 complete with protective gelcat ultravoulet coating on top for complete resistance fromm the extreme of temperature, weather & sunlight. (Note - All the gaps are sealed using silicon sealant from tip and bbottom to make it water proof incl grouting in existing wall and fitting with suitable screws and fixtures upto 3rd floor level incl all labour material tools and plants, scaffolding safety arrangements quality checks complete in all respect all as specified and directed. |
| 13 | M&L for 75 mm thick plain cement concrete 1:3:6, type C2, using 40 mm graded stone aggregate as in plinth protection surfaces finished even and smooth without using extra cement complete all as specified and directed. |
| 14 | M& L for Forming 12mm thick Expansion joints filled with pre-formed bituminous filler and top 30mm primed and sealed with sealing compound, Grade ‘A’ for 75mm th concrete slab. |
| 15 | M& L 50MM thick Cement concrete type B-1, 1:2:4 (20mm graded aggregate) . |
| 16 | M&L for Providing precast cement concrete 1:3:6 type C1 (20mm graded aggregate) solid building blocks or slabs 10cm thick (with plain or interlocking joints as directed) setting in mortar, complete, in walls in half brick thickwalls built in cm 1:4 complete all as specified. |
| 17 | S&F factory made single extruded WPC (wood polymer composite) solid door frame of size 100mmx65mm comprising of virgin PVC polymer of K value 58-60 (suspension grade) calcium carbonate and natural fiber (wood powder/ rice husk/ wheat husk) and non toxic additives (max toxicity index of 12 for 100gms) fabricated with mitred joints after applying PVC solvent cement and screwed with full body threaded star headed SS screws having min frame density of 750 kg/cum, screw withdrawl strength of 2200 N (face) 1100n (edge) min compressive strength of 58 N/mm2, modulus of elasticity 900 N/mm2 and resistance to spread of flame of class A category with property of being termite/ borer proof, water/ moisture proof and fire retardant, complete all as specified and directed |
| 18 | S&F factory made solid WPC (wood polymer composite) door frame 125mmx65mm double rebated made from WPC (single extruded process) material comprisin of virgin PVC polymer of K value 57-60 (suspension grade), calcium carbonate and natural fibers (wood powder/ rice husk / weat husk) and non toxic additives fabricated with mitred joints after applying PVC solvent cement and screwed with full body threaded star headed SS screws having min frame density of 780 kg/cum, having good screw holding capacity (screw withdrawl strength of min 990 N), min compressive strength of 58 N/mm2, modulus of elasticity 900 N/mm2 and resistance to spread of flame of class A category with property of being termite/ borer proof, water/ moisture proof and fire retardant and fixing in position with SS Dsh fasteners/ hold fast of required dia and length, complete all as specified and directed |
| 19 | S&F Factory made solid UPVC wardrobe with frame profile size 71mm x 45mm with MS stiffner and rubber gasket shall be fixed to wall as per manufacturing instructions and UPVC solid shutters with 6mm thick high pressure compact laminate sheet fixing horizontal & verticle style size 71mm x 28mm thick and MS pipe frame as stiffener size 39mm x 18mm x 1mm with rubber gasket and UPVC solid overlap 'L' profile size 16mm x 08mm including all necessary stainless steel hardware fittings (Handles, Self closing hinges, lock, Magnetic catcher ) complete all as specified |
| 20 | S&F in repairs stainless steel sink with triple bowl, , 3.00 mm thick for kitchen (SS 304), with plug, washers and wastes coupling, including bedding in cement mortar on to draft wall or including fixing cantilever brackets, connecting union to pipe, with SS 4 lags stand etc, overall size 72x24x34 inch, complete all as specified and directed. |
| 21 | A Factory made single extruded WPC (Wood Polymer Composite) solid plain flush door shutter of 35mm size comprising of virgin polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/wheat husk) and non toxic additives maximum toxicity index of 12 for 100 gms) having minimum density of 650 kg/cum and screw withdrawal strength of 1800 N (Face) & 900 N (Edge),minimum compressive strength 50 N/mm2 , modulus of elasticity 850 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/moisture proof and fire retardant and fixing with stainless steel butt hinges of required size withnecessary full body threaded star headed counter sunk S.S screws, all as per direction of Engineer-In-Charge. (Note: stainless steel butt hinges and necessary S S screws shall be paid separately) |
| 22 | Providing 30mm thick FACTORY-MADE WIRE MESH SOLID WPC DOOR SHUTTER with edge lipping tape allaround 0.8mm to 1.00mm thick, consisting of Density 650 Kg /Cbm Manufactured by an ISO-9001-2015 certified Company, Door to be panelled with SS mosquito Mesh and XTN aluminium Mesh for additional strength and safety purpose. (Confirming as per IS:4020). The door should be water proof, termite proof,fire retardant and having screw holding capacity. Door to be fixed to frame with 3 nos. SS butt hinges size 100mm*25mm*2mm and 32mm long steel screws drilled suitable to pass through Other hardwares shouldbe fixed with 19*6mm size steel screws etc. Complete as per direction of Engineer-in-charge, manufacturer's specification & drawings.” Note: Fixture/fittings shall be measured & paid under relevant item |
| 23 | S&F Stainless steel wire cloth. 0.36 mm nominal dia of wire and average width of aperture 1.40 mm and fixed with stainless steel wire staples to wooden shutters complete. |
| 24 | Supply and fixing Fiber Glass Reinforced plastic (FRP) Door Frames of cross section 90 mm x 45 mm having single rebate of 32 mm x 15 mm to receive shutter of 30 mm thickness. The laminte shall be moulded with fire resistant grade unsaturated polyester resin and chopped mat. Door frame laminate shall be 2mm thick and shall be filled with suitable wooden block in all the three legs. The frame shall be covered with fiber glass from all sides. M.S. stay shall be provided at the bottom to steady the frame., complete as specified by the manufacturer and as per directions of Engineer-in-charge. |
| 25 | Supply and fixing to existing door frames 30 mm thick Glass Fibre Reinforced Plastic (FRP) panelled doorshutter of required colour and approved brand and manufacture, made with fire - retardant grade unsaturated polyester resin, moulded to 3 mm thick FRP laminate for forming hollow rails and styles, withwooden frame and suitable blocks of seasoned wood inside at required places for fixing of fittings, castmonolithically with 5 mm thick FRP laminate for panels conforming to IS: 14856, including fixing to frames, complete as specified by the manufacturer and as per directions of Engineer- in-charge. |
| 26 | S&F SS 304 grade hinge 25x25x100mm long 3mm thick with ball bearing fixed to chowkhat complete all as specified and directed. |
| 27 | S&F 200 mm long aluminium anodised barrel tower bolt complete all as specified and directed. |
| 28 | S&F 150 mm long aluminium anodised barrel tower bolt complete all as specified and directed. |
| 29 | S&F 150 mm long aluminium handle fabricated type anodised complete all as specified and directed. |
| 30 | S&F 100 mm long aluminium handle fabricated type anodised complete all as specified and directed. |
| 31 | S&F 300 mm long Aluminium alloy, anodised, sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast-aluminium alloy and fixed |
| 32 | S&F 300 mm, size mild steel ordinary rat tail rod pattern springs including roller and roller plate complete complete all as specified and directed. |
| 33 | S&F 140 mm long Floor door stopper of aluminium alloy body and tongue, anodised, with hard drawn steel spring, fixed in floor complete all as specified and directed. |
| 34 | Supply and fixing factory made uPVC white colour Three track three panels sliding window with fly proof S.S wire mesh (Two nos. glazed & one no. wire mesh panels) upto 1.50m height made of (big series) frame 116 x 45 mm & sash 46 x 62 mm both having wall thickness of 2.3 ± 0.2 mm and single glazing bead / double glazing bead of appropriate dimension. (Area of indow above 1.75 sqm) comprising of uPVC multi chambered frame, with inbuilt roller track and sash extruded profiles duly reinforced with 1.60 ± 0.2 mm thick galvanized mild steel section made from roll forming process of required length (shape & size according to uPVC profile), appropriate dimension of uPVC extruded glazing beads and uPVC extruded interlocks, EPDM gasket, wool pile, zinc alloy (white powder coated) touch locks with hook, zinc alloy body with single nylon rollers (weight bearing capacity to be 40 kg), G.I fasteners 100 x 8 mm size for fixing frame to finished wall and necessary stainless steel screws etc. Profile of frame & sash shall be mitred cut and fusion welded at all corners, including drilling of holes for fixing hardware's and drainage of water etc. After fixing frame the gap between frame and adjacent finished wall shall be filled with weather proof silicon sealent over backer rod of required size and of approved quality, complete all as specified and directed by Engineer-in-Charge. (Glass or wiremesh shall be paid separately) Note: For uPVC frame and sash extruded profiles minus 5% tolerance in dimension i.e. in depth & width of profile shall be acceptable. Variation in profile dimension in higher side shall be accepted but no extra payment on this account shall be made. |
| 35 | S&F 5.5 mm thick tinted Float glass, selected quality and glazing in UPVC windows in squares n exc 0.5 sq. m in each pane panem in each pane for windows/ventlators complete all as specified and directed. |
| 36 | M&L for preparation of new wooden surfaces, exc 10 cm width or girth and applying two coats of synthetic enamel paint over one coat of pink primer complete all as specified and directed. |
| 37 | S&F GI powder coated framed work such as grills gratings etc with ends of bars shouldered and / or riveted or forged into spiked framed guard bars barred iron doors ladders framed blasters walkways railings framework of water tanks and similar work complete all as specified and directed. |
| 38 | S&F in repair Stainless steel curtain rods of 25mm dia complete all as specified and directed |
| 39 | S&F SS ornamental stainless steel holding brackets /end cap for 25 mm dia curtain rods complete all as specified and directed. |
| 40 | S&F Stainless steel peg set of 5 hooks including chromium plated brass screws and wooden/plastic cleats (Minimum weight 190gms). |
| 41 | Demolition of unreinforced cement concrete Roofs, floors (other than ground floors), beams, staircases, landing, chajjas and similar suspended work including removal of debries to outside MOD land complete all as specified and directed. |
| 42 | S&F in repair Stainless steel curtain rods of 25mm dia complete all as specified and directed. |
| 43 | M&L for Virified Ceramic coloured light shade tiles 10 mm thick (square/ rectangular) polished, area of each tiles not exceeding 0.36 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to matc complete all as specified and directed. |
| 44 | M&L for coloured glazed ceramic(Joint Free) tiles 7 mm to 8 mm thick (square / rectangular) of size 450X 300X 7mm thick as in skirting / dado etc laid over and including 10 mm thick backing coat in cement mortar 1:4, set and jointed in neat cement slurry and pointed with coloured cement to match the tiles complete all as specified and directed. |
| 45 | M&L for green Marble work 18-20 mm thick (table rubbed and polished) in steps, jambs, pillars, window cills, cooking platforms and like set over & incl 15mm thick cement mortar (1:4) including pointing in coloured cement (1:2) using marble dust with admixture of pigment to match with marble shade complete all as specified and directed. |
| 46 | M&L for 18-20mm thick Granite (of any type) work (table rubbed and polished) in steps, jambs, pillars, window- cills, cooking platforms and like in set over & incl 15mm thick cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite. |
| 47 | M&L for Sand stone slabs 5cm thick in sun-shades, chajjas, shelves, cills, landings, cover stones, templates, etc. n exc. 2m in length, punched dressed on face and along exposed edges, self faced on other side and set and pointed in lime mortar 1:2 or cement mortar 1:4. complete all as specified and directed. |
| 48 | M&L 18-20mm thick machine cut kota stone slab flooring, treads etc over and including 15 mm thick screed bed in CM 1:4, laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing complete all as specified and directed. |
| 49 | M&L 18-20mm thick machine cut kota stone slab in riser of steps, skirting,dado and pillar laid over and including 10 mm thick plaster in CM 1:4 laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing complete all as specified and directed. |
| 50 | Labour only for rounding to edges of stone slabs one edge, such as in steps cooking plateform, and other similar situation complete all as specified and directed. |
| 51 | S&F in repairs 15mm bore bib taps ,fancy type of cast copper alloy chromium plated with capstan handle, screwed down, screwed for iron pipe or for brass ferrule complete. |
| 52 | S&F in repair 15mm bore dia stop valve/angle valve cast copper alloy chromium plated, fancy type screwed down high pressure with capstan handle, screwed both ends for iron pipe or for union complete. |
| 53 | S&F Health faucet (ABS Body) mild steel chromium plated suitable for 15 mm dia pipe with 1.25 metre long flexible tube and ABS wall hook including making connections and fixed in position complete in all respect as specified. |
| 54 | S&F Toilet paper holder with flat recessed type stainless steel Complete all as specified and directed. |
| 55 | S&F in repair 20mm bore Gun-metal, globe or gate valves, with iron wheel head, screwed both ends for iron pipe and fixed complete all as specified and directed |
| 56 | S & F in repair 10 Ltr capacity PVC valveless , syphonic action type , flushing cistern low level white with inlet ball valve float and handle including bracket , 32 mm dia pvc flushing pipe complete all as specified and directed. |
| 57 | S&F in repair vitreous china wash hand basin below counterof size 595 x 420 x 155mm white, comprising of the following items Complete all as specified and directed by Engineer in Charge.Complete all as specified and directed by Engineer in Charge. |
| 58 | S&F in repair vitreous china wash hand basin below counterof size 595 x 420 x 155mm white, comprising of the following items Complete all as specified and directed by Engineer in Charge. |
| 59 | S&F in repairs 15 mm size Pillar tap swan neck (suitable for counter top WHB ) cast copper alloy with capstan head, chromium plated screwed down high pressure with or without lettered with long screwed shank and fly nut screwed for iron pipe Complete all as specified and directed by Engineer in Charge. |
| 60 | S&F 32 mm dia Brass chromium plated bottle traps for wash basins with inlet and outlet screwed for pipe or connections including necessary packing, union and cap and fixedComplete all as specified and directed by Engineer in Charge. |
| 61 | S&F Waste fitting 32mm dia chromium plated with long screwed shanks and fly nut, flange end, bedded in red lead cement and other end fixed complete all as specified. |
| 62 | S&F in repairs 600mmx450mm bevelled edge mirror of selected quality glass, mounted on 6mm thick AC building board or commercial plywood and fixed to wooden plugs with chromium plated brass screws and cup washers complete all as specified and directed by Engineer in Charge. |
| 63 | S&F 5.5mm thick Sheet glass, ordinary quality and glazing with oil putty in square exc 0.5 sq. m for size defined as per directed by Engr In Charge. |
| 64 | S&F stainless steel soap dish of size160x160x1mm thick fixed to plugs with chromium plated brass screws as complete all as specified and directed. |
| 65 | S&F in repairs white Vitreous china wash down water closet (pedestal pattern) with fixing bolt, with plastic water closet seat, white, closed pattern with flat bottom, and cover with aluminised hinging device, including all connections complete complete all as specified and directed. |
| 66 | S&F in repairs brass Chromium plated tubular Towel rail 20 mm dia D type 600mm long bettwen flange fixed with and including Chromium plated brass screws and wooden/plastic cleats complete all as specified and directed. |
| 67 | S & F Stainess steel Towel Ring fixed with and including Chromium plated brass screws complete all as specified and directed |
| 68 | S&F in repair PVC connection 15mm dia and 45 cm long with 2 Nos PTMT nuts, complete all as specified and directed by Engineer in Charge. |
| 69 | Dismantling water tanks of capacity exc 250 and not exc 500 litres removal to store complete all as specified and directed. |
| 70 | Dismantling water tanks of capacity exc 500 and not exc 1000 litres removal to store complete all as specified and directed. |
| 71 | Supply and fix 500 litres capacity triple layer (white), rotational molded, polythene water storage tank (Cylindrical vertical with closed top) hoisted and fixed on roof in position, including all fitting such as connection pieces with GI tank nipple for inlet, outlet, washout and overflow etc. complete all as specified and directed. |
| 72 | Supply and fix 1000 litres capacity triple layer (white), rotational molded, polythene water storage tank (Cylindrical vertical with closed top) hoisted and fixed on roof in position, including all fitting such as connection pieces with GI tank nipple for inlet, outlet, washout and overflow etc. complete all as specified and directed. |
| 73 | Taking up or down 15 mm bore steel tubing and connections, complete all as specified and as directed |
| 74 | Taking up or down 20 mm bore steel tubing and connections, complete all as specified and as directed |
| 75 | Taking up or down 25 mm bore steel tubing and connections, complete all as specified and as directed |
| 76 | M&L for Cutting chases, of girth not exceeding 10 cm for concealed water tubing or concealed conduit wiring, etc. in stone / brick masonry wall built in cement mortar and making good, disturbed surface in Cement mortar 1:3 complete. |
| 77 | Supply and fixing 20MM OD CPVC pipes SDR11 & Brass CPVC SDR11 fittiings (incl elbow, tee, socket, reducer, bends, unions end caps, etc) laying concealed in walls/ceiling or laying in floors jointed with CPVC solvent only complete all as specified and directed. |
| 78 | Supply and fixing 25MM OD CPVC pipes SDR11 & Brass CPVC SDR11 fittiings (incl elbow, tee, socket, reducer, bends, unions end caps, etc) laying concealed in walls/ceiling or laying in floors jointed with CPVC solvent only complete and connecting to water supply pipe line , pipe shall be fixed on wall over multi pipe bracket system stack clamp as per drg No CEAG/AR/TD/08R complete all as specified and directed. |
| 79 | Supply and fixing 32MM OD CPVC pipes SDR11 & Brass CPVC SDR11 fittiings (incl elbow, tee, socket, reducer, bends, unions end caps, etc) laying concealed in walls/ceiling or laying in floors jointed with CPVC solvent only complete and connecting to water supply pipe line , pipe shall be fixed on wall over multi pipe bracket system stack clamp as per drg No CEAG/AR/TD/08R complete all as specified and directed. |
| 80 | S&F ball valves high pressure of PTMT with epoxy coated aluminium rod and high density plastic ball screwed for iron pipe or brass ferrule and fixed 20mm dia complete all as specified and directed. |
| 81 | S&F 100mm cast iron sanitary connections—short connections pipe of length upto 300 mm complete all as specified and as directed by the Engr in ch. |
| 82 | Taking down CI/rain water pipes/PVC pipes (any size or pattern) including all fittings, heads, shoes, bends, swan necks, complete |
| 83 | S&F 40mm dia PVC (SWR) pipes single socketed,in any length with rubber ring joints, fixed in wall including PVC clamps complete all as specified and diected |
| 84 | S&F 75mm dia PVC (SWR) pipes single socketed,in any length with rubber ring joints laid in trenches or in floor complete all as specified and directed |
| 85 | S&F 110mm dia PVC (SWR) pipes single socketed,in any length with rubber ring joints, fixed to walls complete all as specified and directed |
| 86 | S&F 110mm dia PVC (SWR) pipes single socketed,in any length with rubber ring joints, fixed in trenches and floor complete all as specified and directed |
| 87 | S&F PVC SWR 110 mm dia bends of any radius complete all as specified and directed |
| 88 | S&F in 75mm PVC nahani trap, plain with grating including jointing with solvent cement complete all as specified and directed |
| 89 | S&F PVC (SWR) vent cowls 110mm complete all specified and directed |
| 90 | S&F in repair Stainless Steel 304 Floor trap square size 125mm x 125mm made in two parts for smell and mosquito proofing with double jali complete all specified and directed |
| 91 | Taking down cement plaster in cement or cement lime mortar on brick or stone walls etc. including raking out joints, hacking for key, scrubbing down with water etc, including removal of debries out side MoD land complete all as specified and directed. |
| 92 | M&L for rendering 15 mm thick in two layers Ist 10 mm thick and 5 mm final coat mixed with WPC on brick/stone/ PCC block masonry wall surface in cement mortar 1:4, finished even and smooth without using extra cement (water proofing compoundshall be paid for separetly complete all as specified and directed.) |
| 93 | M&L for rendering 10mm thick on other than fair faces of brick work or concrete surfaces or stone masonry surfaces in cement mortar 1:6, finished even and smooth without using extra cement complete all as specified and directed. |
| 94 | M&L for 5mm thick rendering in cement mortar 1:3 on concrete surface of ceiling, finished even and smooth without using extra cement complete all as specified and directed. |
| 95 | M&L for preparation of new plastered surfaces of walls incl application plaster of paris putty/ wall care putty of 2 mm thickness over plastered surface & applying two coat of Distemper oil emulsion over a coat of primer on wall surfaces complete all as specified and directed, By mechanical means all as per manufacturers instructions. |
| 96 | M&L for complete removal of existing treatment from wall including brooming down or steel wire brushing, scraping down complete including preparation of old surfaces incl application plaster of paris putty/ wall care putty of 2 mm thickness over plastered surface and applying two coat of Oil bound Distemper over a coat of primer on wall surfaces complete all as specified and directed, By mechanical means all as per manufacturers instructions. |
| 97 | M&L for preparation of new plastered surfaces of ceiling and applying two coats of OBD over a coat of primer complete all as specified and directed, By mechanical means all as per manufacturers instructions. |
| 98 | M&L for preparation of old decorated surfaces of ceiling (plastered or unplastered) by brooming down , scrapping down smoke soot, moss and efflorescent salts and trading oil and greasy spots etc and applying two coat of white wash on ceiling complete all as specified and directed, By mechanical means all as per manufacturers instructions. |
| 99 | Supply only Liquid water proofing compound complete all as specified and directed by Engineer-in-charge. |
| 100 | M&L for repairing the edge/corner of chajja/roof projection and similar work by removing of plastered width/girth exceeding 15cm & n.exc 30cm and making good with 15mm rendering in cment mortar 1:3 to match with including chicken wiremesh netting on exisiting surfaces including necessary form work complete all as specified.(Note- Height of building upto G+1) |
| 101 | M&L for plain cement concrete 1:2:4 type B0 using 12.5 mm graded stone aggregate, in roof for padding to achieve the required slope, kerbs or mud stops, rounded or chamfered on edges complete all as specified and directed. |
| 102 | M&L for 10mm thick rendering on concrete surface in CM 1:4 to be finished even and smooth with out using extra cement mixed with water proofing compound as per manufacturer instructions. Note:- WPC will be measured & paid separately. |
| 103 | Material and labour for water proofing treatment by applying one coat of oil base bituminous primer @ 0.3 Kg/Sqm with brush / roller, laying of 3 mm thick APP based polymer modified membrane reinforced non-woven polyester, weight not less than 3.50 Kg/Sqm and sealing all the over laps 100 mm in length side and 100 mm in width side of membranes laid with torch application complete complete all as specified and directed.Note :- Work shall be carried out upto 1 storey bldg, contractor to quote rates accordingly |
| 104 | Supply and provisioning high performance, general purpose, non shrink, cementious repair micro concrete as per manufacturers instructions to an average thickness of 30 mm upto clear cover for beam and column, fluid micro concrete shall be mixed with 6 mm down coarse stone aggregate and specified quantity of water and fixed using a power including the cost of all materials, rent of tools, scaffolding and labour charges complete all as specified and directed. |
| 105 | M&L chipping / dismantling of loose damaged concrete removed carefully by using mechanical concrete upto good parent concrete to expose the existing reinforcement (direct hammering should be avoided) average thickness of chipping average 30 mm upto clear cover alround lintel / beams / column upto 3.35 mtr height including scffolding complete all as specified and directed by EIC |
| 106 | Supplying and application of rust remover/converter over the corroded reinforcement bar where ever/Polymer modified mortar micro concreting is required and cleaning the same after application incl cost of all materials, rent of tools, scaffolding, cost of brushes etc. upto 3.35 mtr height complete all as specified and directed. Please Enable Macros to View BoQ information |
| 107 | Supplying and application of rust remover/converter over the corroded reinforcement bar where ever/Polymer modified mortar micro concreting is required and cleaning the same after application incl cost of all materials, rent of tools, scaffolding, cost of brushes etc. upto 3.35 mtr height complete all as specified and directed. Please Enable Macros to View BoQ information |
