|
| 1 | Dismantling of plain or corrugated AC/ steel /fibre glass reinforced transluscent sheeting any guage thickness including nainital or similar pattern roof covering complete all as specified and directed. |
| 2 | Dismantling of timber scantling 40 sqcm and over in section in any position complete all as specified and directed. |
| 3 | Dismantling of timber scantling in fillets, rails, posts, rafters, purlins etc under 40 sqcm in section in any position complete all as specified and directed. |
| 4 | S&F pre-painted Galvalume aluminium zinc coating GI based corrugated steel sheet 0.50mm thick having tensile strength 550 Mpa as in roof covering / cladding to wall including fixing with self tapping screws washers, profile, shape and colour as approved by GE, complete all as specified and directed. |
| 5 | S&F pre-painted Galvalume aluminium zinc coating GI based plain steel sheet 0.50mm thick having tensile strength 550 Mpa as in roof covering / cladding to wall including fixing with self tapping screws washers, profile, shape and colour as approved by GE, complete all as specified and directed. |
| 6 | M&L 2nd class hard wood in scantling clean sawn timber fixed complete all as specified and directed. |
| 7 | M&L Preparing surfaces of wood and wood based materials, new or old, of any description and girth, not otherwise described and treated with two coats of Creosote complete all as specified and directed. |
| 8 | Dismantling boarding ,aluminium partitions any description fixed in any position with nails etc complete all as specified and directed. |
| 9 | S&F 20 mm thick 2nd class hard wood boarding in eaves board/fascia plained one side with butt joints fixed with nails complete all as specified and directed. |
| 10 | M&L for 18/19 mm thick Prelaminated particle board, exterior grade, prelaminated one side with decorative choice laminations and other side balancing white lamination fixed with screws as in cabinet / cup-board completed all as specified and directed. |
| 11 | M&L 12 mm thick Plywood, grade BWR, type BB, fixed with screws to timber frame work completed all as specified and directed. |
| 12 | M& L for 0.90 mm thick Decorative laminate type 1 of surface finish, colour and pattern as approved, fixed with approved adhesive as per manufacturer's instructions completed all as specified and directed. |
| 13 | M&L 2nd class hard wood plain fillets, square, rectangular or triangular in section, clean sawn secured with nails or brads of sectional area exc 13 Sqcm & n. exc 25 Sqcm complete all as specified and directed. |
| 14 | S&F Continuous (Piano) hinges, brass, width of flaps 30 mm (when open) complete all as specified and directed. |
| 15 | S&F in repair Magnet catches for cupboard shutter, brass body and striking plate including letting in complete all as specified and directed. |
| 16 | S&F 100 mm size, extruded brass handles, fabricated type, polished complete all as specified and directed. |
| 17 | S&F 40 mm dia, cupboard knobs fixed with nut screw and washer of mild steel bright finished complete all as specified and directed. |
| 18 | S&F 4 levers brass cupboard locks grade I,size 50 mm complete all as specified and directed. |
| 19 | Dismantling of wall/ceiling boards (fibre, pulp,insulation, etc.) or insulation boards/ slab/blankets, any thickness including cover fillets complete all as specified and directed. |
| 20 | S&F Anodised Aluminium frame work for snap grid false ceiling comprising of Gl perimeter channnel 0.55 mm thick with Aluminium main T- flange of 25 mm and web of 30 mm fixed to surrounding wall angle with flange and web 25 mm each , Cross T with flange 25 mm and web 25 mm fixed to main T, Main T is suspended from soffit @ 1200 mm c/c using Gi wire of 4mm thickness, Aluminium frame will be 60cm x 60 cm to recieve ceiling board complete all as specified and directed. |
| 21 | M&L for 4mm thick E - boards 600 mm x600 mm prepainted fibre boards ceiling designer/decorative type with different designs as approved by the GE fixed or laid in ceiling timber /GI/ aluminium frame work in ceiling flat or sloping complete all as per manufacturer instruction complete all as specified and directed. |
| 22 | Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing), removing serviceable tiles to store and rubbish off the premises. |
| 23 | M&L for light shade vitrified ceramic tiles 10 mm thick (square/rectangular) polished, area of each tiles not exceeding 0.36 Sqm, in floor etc set and jointed in neat cement slurry and pointed in white or coloured cement to match over 15mm thick screed bed in CM 1:4 complete all as specified and as directed. |
| 24 | M&L for light shade vitrified ceramic tiles 10 mm thick (square/rectangular) polished, area of each tiles not exceeding 0.36 Sqm, in skirting etc set and jointed in neat cement slurry and pointed in white or coloured cement to match over 10mm thick rendering in CM 1:4 complete all as specified and as directed. |
| 25 | M&L for Non skid joint free ceramic tiles, 7 to 8 mm thick (square/rectangular) area of each tile exceeding 0.11 sqm but not exceeding 0.18 sqm, in floors etc set and jointed in neat cement slurry and pointed in white or coloured cement to match with the tile colour over 15mm thick screed bed in CM 1:4 complete all as specified and directed |
| 26 | M&L for Non skid joint free ceramic tiles, 7 to 8 mm thick (square/rectangular) area of each tile exceeding 0.11 sqm but not exceeding 0.18 sqm, in skirting etc set and jointed in neat cement slurry and pointed in white or coloured cement to match with the tile colour over 10mm thick rendering in CM 1:4 complete all as specified and as directed. |
| 27 | M&L for Glazed ceramic coloured tiles in vertical surface of size 300x450mm, 7-8mm thick set and jointed in neat cement slurry and pointed in white or colour cement to match with the tile colour over 10mm thick backing coat in CM 1:4 complete as specified and directed. |
| 28 | M&L for outdoor coloured vitrified paving tiles, joint free(edge cut) of size 300x300x8 to 10mm thick as in floor etc set and jointed in neat cement slurry and pointed in white or coloured cement to match over 15mm thick screed bed in cement sand mortar 1:4 complete all as specified and as directed. |
| 29 | M&L for outdoor coloured vitrified paving tiles, joint free(edge cut) of size 300x300x8 to 10mm thick as in skirting etc set and jointed in neat cement slurry and pointed in white or coloured cement over 10mm thick rendering in CM 1:4 complete all as specified and as directed |
| 30 | M&L for machine pressed pre polished chequered cement concrete tiles 300 X 300 X 25mm thick over 15mm thick screed bed in CM 1:4 set & jointed in neat cement slurry & pointed in white or coloured cement to match as in floor complete all as specified and directed. |
| 31 | Demolition of cement concrete (unreinforced) in ground floor and paving n.exc 15cm thickness (below/above ground level) all as directed. |
| 32 | M&L 75mm thick PCC 1:3:6 type C2 using 40mm graded stone aggregate as in plinth protection finished even and fair with 10 mm joint filled with bitumen mastic (mix of bitumen and sand at 3m intervals complete all as specified and directed. |
| 33 | M&L for PCC (1:3:6) type C-2 using 40 mm graded stone aggregate as in surface channel and drains etc complete all as specified and directed. |
| 34 | Extra for forming fair finished drain or channel 30cm inner girth in cement concrete using extra cement including forms, moulds, mitred/stopped ends etc all as specified and directed. |
| 35 | M&L 100 mm thick PCC 1:2:4 type B1 using 20mm graded stone aggregate as in hard standing finished even and fair laid in alterrnate bays of size not exc 2 m X 2m with construction joints and filled with joint sealing compound complete all as specified and directed. |
| 36 | Demolition of precast concrete block walling built in cement mortar complete all as specified and directed. |
| 37 | M&L Precast cement concrete block masonry with solid block exc 10 Cm in width, type C1 (1:3:6) (using 20mm graded stone aggregate) and setting in CM 1:6 complete all as specified and directed. |
| 38 | M&L Precast cement concrete block masonry with solid block 10 Cm thick, type C1 (1:3:6) (using 20mm graded stone aggregate) with plain or interlocking joints and setting in CM 1:4 complete all as specified and directed. |
| 39 | Demolition of reinforced cement concrete of any description in any position not otherwise described complete all as specified and directed. |
| 40 | M&L Precast RCC type B1 (1:2:4) (using 20mm graded stone aggregate) as in cover slab, landing, shelves, chhajja and similar artical with plan face set in CM (1:6) complete all as specified and directed. |
| 41 | M & L TMT bars 10 mm dia & over, cut to length, bend to shape required including cranking, bending, spirally for hooping for columns, hooking ends and binding with & including mild steel wire not less than 0.90 mm dia on securing with clips complete all as specified and directed. |
| 42 | M&L 20 mm thick Granite stone slab (table rubbed and polished) in steps, jambs, pillars, window-cill, cooking plateform and like in cement mortar (1:4) including pointing in white cementcement with admixture of pigment to match the shade of granite stone including grinding and polishing, rounding to edges laid in any position over 15mm thick screed bed in CM 1:4 complete all as specified and as directed. |
| 43 | Taking down chowkhat with shutter (without taking off shutter from the frame) and area exc 1.5 sqm but n.exc 4 sqm each complete all as specified and directed. |
| 44 | Taking down chowkhat with shutter (without taking off shutter from the frame) and area n.exc 1.5 sqm each complete all as specified and directed. |
| 45 | Taking down shutters of any description exc 1.0 sqm but n. exc 2.0 sqm each complete all as specified and directed. |
| 46 | Taking down shutters of any description n. exc 1.0 sqm each complete all as specified and directed. |
| 47 | Taking down shutters of any description exc 2.0 sqm each complete all as specified and directed. |
| 48 | Taking down shutters of any description exc 1.0 Sqm and nexc 2 sqm refixing in same opening after necessary repair complete all as specified and directed. |
| 49 | S&F 2nd class hard wood plain, solid, straight chawkhats and frames, wrought, framed, rebated on the solid rounded or chamfered, put together with glue pinned at joints complete all as specified and directed. |
| 50 | S&F 35mm thick flush shutter solid core construction with block board core and plywood face panels, decorative face veneer with lipping/frame to match on both sides complete all as specified and directed.. |
| 51 | S&F 35 mm thick 2nd class hard wood plain framed panneled shutter any number of panels with panel of 9mmB.W.P. commerical play flat on both side with feather edged complete all as specified and directed. |
| 52 | M&L 30mm thick 2nd class hard wood factory made glazed and skeleton shutter, open rebated and prepared to receive glass, gauge etc. devided into squares with plain chamfered or rounded, mitred and rebated sash bars edges of framing plain, chamfered or rounded, fitted with cut and mitred beads for securing glass etc. sizes of members of shutters as specified in SSR Part-I Section-8 clause 8.24(b) complete all as specified and directed. |
| 53 | M&L for preparation of new or previously untreated surfaces of wood and wood based materials of any description not otherwise described, over 10 cm width or girth and applying two coats of Synthetic enamel paint over a coat of pink primer complete all as specified and directed. |
| 54 | S&F Factory made solid panel PVC door shutter 30 mm thick (style) considering of frame made out of MS tubes for top & bottom rails. MS frame shall be covered with heat moulded plain colour PVC 'C' channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rails, lock rail & bottom rails on either side & as gap insert for top rail & bottom rail, Panelling of plain colour PVC sheet to be fitted in the MS frame welded / sealed to the stiles & rails with suitable PVC sheet beading, and jointed togeather with solvent cement, fixing in the frame at site complete all as specified and directed. |
| 55 | S&F Solid PVC door frame of size 50mmX47mm made out of 5mm plain colour PVC sheet reinforcement with M.S square tube, supplying & fixing in openings as per specification complete all as specified and directed. |
| 56 | S&F Butt hinges, medium weight, cold rolled mild steel, size of hinges 100 mm complete all as specified and directed. |
| 57 | S&F Butt hinges, medium weight, cold rolled mild steel, size of hinges 75mm complete all as specified and directed. |
| 58 | S&F Extruded Aluminium, anodised, bow handles of size 150mm complete all as specified and directed.. |
| 59 | S&F Extruded Aluminium, anodised, bow handles of size 100mm complete all as specified and directed. |
| 60 | S&F aluminium anodised barrel bolts and fixed of 200 mm length complete all as specified and directed. |
| 61 | S&F aluminium anodised barrel bolts and fixed of 100 mm length complete all as specified and directed. |
| 62 | S&F 4 levers Brass Mortice lock,vertical type,100mm length complete all as specified and directed. |
| 63 | S&F Mild steel sliding door bolt, plate type stove enamelled black, with bright bolt not less than 12mm dia with and including a minimum of 6 bolts and nuts, four on bolt plate and two on staple plate, length of bolt 300mm complete all as specified and directed. |
| 64 | S&F floor door stopper of aluminium alloy body and tongue, anodised, with hard drawn steel spring, fixed in floor, overall length of cover plate 140mm complete all as specified and directed. |
| 65 | Hacking out old broken glass (any thickness, size, quality or description) from wooden frame including taking out old wooden beads complete all as specified and directed. |
| 66 | S&F 3 mm thick figured glass, pin head type and glazing with oil putty or wooden beads in squares n.exc 0.5 sqm in each pane complete all as specified and directed. |
| 67 | S&F 3 mm thick sheet glass ordinary quality and glazing with oil putty or wooden beads in square n exc 0.5 sqm in each pan complete all as specified and directed. |
| 68 | S&F stainless steel wire cloth, 0.36mm nominal dia of wire and average width of aperture 1.40 mm and fixed with stainless steel wire staples. |
| 69 | S&F in repairs stainless steel wire cloth, 0.36mm nominal dia of wire and average width of aperture 1.40 mm and fixed with stainless steel wire staples. |
| 70 | S&F framed work such as grills, gratings, etc. with ends of bars shouldered and/or riveted, or forged into spikes; framed guard bars; barred iron doors; ladders; framed balusters; walk ways; railings; framework of water tanks and similar work conforming to Fe.290.Gde-E-165 all as specified and as directed. |
| 71 | S&F in repairs Vitreous China Urinal, Half stall type, white complete including providing and fixing plugs, bedding urinal against wall in cement mortar 1:2, securing urinal to plugs with and including 60mm long brass screws, pointing around urinal back in cement; also including brass chromium plated waste coupling 32mm dia, and waste pipe with grating and union for discharge pipe complete all as specified and directed. |
| 72 | S&F in repair Urinal spreader of chroumium plated any for fixing with 15 mm dia pipe complete all as specified and directed. |
| 73 | S&F in repairs 15 mm bore pillar taps fancy type, cast copper alloy, with capstan heads, chromium plated, screwed down high pressure, shanks and fly-nuts, screwed for iron pipe and fixed complete all as specified and directed. |
| 74 | S&F in repair vitreous china urinal partition white size 310 X 700 mm above floor, fixed to wall complete all as specified and directed. |
| 75 | S&F in repair Health faucet (ABS Body) mild steel chroumium plated suitable for 15mm dia pipe with 1.25metre long flexible tube and ABS wall hook including making connections and fixed in position complete all as specified and directed. |
| 76 | S&F in repair Water closet Pedestal pattern, white (excluding fixing bolts, flushing cistern and flush pipe) including plastic water closet seat, white/black, closed pattern with flat bottom and cover and mild steel chroimum plated or aluminised hinging device complete all as specified and directed. |
| 77 | S&F in repairs toilet paper holder with flat recessed type stainless steel complete all as specified and directed. |
| 78 | S&F in repair 75mm dia PVC (SWR) floor trap with CP grating including jointing with solvent cement to pipe complete all as specified and directed. |
| 79 | S&F in repair for CP grating doom 100mm dia complete all as specified and directed. |
| 80 | S&F in repair 50mm bore CPVC pipes SDR 11 & plain CPVC SDR 11 fitting on walls/celing or laying in floors complete all as specified and directed. |
| 81 | S&F in repairs stainless steel Soap dish, any type, fixed to plugs with chromium platedbrass screws complete all as specified and directed. |
| 82 | S&F in repair Vitreous china squatting pan, 'Orissa' pattern, size 580 X 440 mm white, with integral foot rests including provision of lime concrete bedding, fixing of flushing cistern complete all as specified and directed. |
| 83 | S&F in repair PVC valveless, syphonic action type flushing cistern, low level, white, 10 Ltr capacity with inlet, ball valve, float and handle including brackets complete all as specified and directed. |
| 84 | S&F in repairs Vitreous China Wash Hand Basins, size 550 X 400 mm (Flat Back or Angle Back type) including Pillar Taps 15mm Bore Cast Copper Alloy with Capstan Heads, Chromium Plated, fancy type, 32mm dia Brass Chromium Plated Waste Fitting and PVC connection pipe of 15mm x 600mm long, a Pair of Angle iron Brackets duly Painted/Erecting Stand including Cutting and Pinning in Ends, Making Good Disturbed Surfaces in Cement Mortar 1:3, complete all as specified and as directed .Make:- Prayag /Hindware/Cera |
| 85 | S&F in repair Bip tap, chromium plated, 15mm fancy type,complete all as specified and directed. |
| 86 | Taking up or down steel tubing and connections for 15 mm bore of pipes complete all as specified and directed. |
| 87 | Taking up or down steel tubing and connections for 20 mm bore of pipes complete all as specified and directed. |
| 88 | S&F GI steel tubing medium grade 15mm bore with all fitting and fixed complete to wall and ceiling or laid under in floor complete all as specified and directed. |
| 89 | S&F GI steel tubing medium grade 20mm bore with all fitting and fixed complete to wall and ceilings or laid in floors complete all as specified and directed. |
| 90 | S&F in repair Angular stop cock, fancy type, chromium plated, 15 mm bore complete all as specified and directed. |
| 91 | S&F in repairs PVC connections 15 mm size with PTMT nuts of length 450mm complete all as specified and directed. |
| 92 | S&F in repair 600mm x 450mm beveled edge mirror of selected quality, glass 5mm thick, mounted on 6mm thick commercial plywood and fixed to wooden plugs with chromium plated brass screws and cup washers complete all as specified and directed. |
| 93 | S&F rotational moulded polyethylene water storage tanks (cylindrical vertical with closed top) hoisted and fixed in position of capacity 1000 Ltrs incl taking down old unservicable tank of any description and in any position complete all as specified and directed. |
| 94 | S&F in repair ball valve of size 20mm, high pressure, with polyethene float and fly nut, screwed for iron pipe complete all as specified and directed. |
| 95 | S&F in repairs Gun metal gate 20mm valve class I (ISI) marked with iron wheel head, screwed both ends for iron pipe, suitable for pipe complete all as specified and directed. |
| 96 | S&F in repair PVC (SWR) bends, any radius, 110 mm bore complete all as specified and directed. |
| 97 | S&F in repairs PVC (SWR) 110 mm bore pipes single socketed in any length with rubber ring joints, fixed to walls/floor including necessary sockets, fitting and clamps for securing pipe complete all as specified and directed. |
| 98 | S&F in repair PVC (SWR) 75mm dia pipes single socketed in any length with rubber ring joints fixed to walls/floor including necessary sockets, fitting and clamps for securing pipe complete all as specified and directed. |
| 99 | S&F in repair PVC (SWR) vent cowl 75mm dia complete all as specified and as directed. |
| 100 | S&F in repairs PVC (SWR) bend with access door of any radius 110mm bore complete all as specified and as directed. |
| 101 | S&F in repair PVC (SWR) reducer 110mm dia complete all as specified and as directed. |
| 102 | S&F in repair PVC (SWR) 110mm dia in junction single , (Single T) equal or unequal complete all as specified and as directed. |
| 103 | S&F in repair 75mm dia PVC (SWR) multi floor trap with CP grating including jointing to pipe complete all as specified and directed. |
| 104 | S&F in repair for PVC (SWR) gully trap 125/110 mm, setting and jointed with solvent cement complete all as specified and directed. |
| 105 | M&L for PVC pipes 180mm half round fixed as valley gutter pipe at roof level and walls including joint bracket, running outlet,L bow, stop end, stop end outlet, support bracket fixing at 1mtr distance each complete all as specified and directed. |
| 106 | Repair to damagedroof after complete removal existing treatment including padding, cleaning, the surface using wire brush brooming down and appplying the following treatment all as directed in order of precedence as stated:-(i) Rendering 15mm thick in Cm (1:4) on existing roof surface true to level after applying cement slurry @ 3Kg/Sqm.(ii) Applying one coat of bituminious primer . (Note :- Bituminous primer shall be 'TANK MASTIC' manufactured by M/s STP Ltd or \\"EMUFALTE\\" manufactured by M/s Texsa India Ltd)(iii) supply and laying 3mm thick APP based polymeric membrance of approved manufactured with weight not less than 3.00 Kgs Sqm reinforced with non-woven polyester febric weight not less than 150gms peer Sqm. Polymeric membrance shall be taken to a height of 3cm (minimum) and than inserted inside the groove of parapet wall and shall be finished by a membrance flashing.(iv) Applying one coat of aluminum paint over the APP modified membrance @ 0.11Kg/sqm. Note :- (i) Laying APP based polymeric membrance shall be done torch on method as per manufacturers instructions.(ii) A minimum overlap of 100mm and 75mm should be made at the end and sides of the polymeric membrance respectively and sealed all overlaps and joints as per manufacturers instructions.(iii) APP based polymeric membrance shall be \\"SUPER THERMOLAY\\" manufactured by M/s STP Ltd of \\"MOPLY FP 3mm\\" manufactured by M/s Texas India Ltd & equivalent of Shivam Tar product. |
| 107 | Complete removal of existing treatment on wall/ roof projections including facia, cornices etc by scrapping with mechanical sander (having mechanical vaccum mechanism) with sanding pad of appropriate grit to make surface clean,free from dust, loose paint etc by skilled labour. |
| 108 | Applying waterproof cement based exterior wall putty @ 1 Kg(undiluted) per sq mtr. of average thickness 1 mm over the plastered/old painted wall after scrapping to prepare the surface even and smooth complete and sanding of the putty surface with mechanical wall sander (having mechanical vacuum mechanism) having RPM not less than 1500, sanding pad of 240 Grit or above to make the surface free from dust etc. by skilled labour. Step 1) Mix the putty powder by adding water as per manufacturer instructions and mix it with putty mixer with the mixing capacity of min 2.5 kg putty per minute.Step 2) Apply the first coat the prepared mixer with the help of fully automatic airless spray machine of putty application having flow speed of max 6 ltrs per minutes with a maximum pressure 3300 PSI Step 3) Allow 6-8 hrs time to dry the putty surface. |
| 109 | Applying Two or more coats of 100% Premium acrylic emulsion paint having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance, dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives @ 1.43 litre/ 10 sqm over and including priming coat of exterior primer applied @ 0.90 litre/ 10 sqm Note- (a) Primer and emulsion application to be carried out through air less spray machine ( Only mechanical application allowed except in paint application on bands/chajja/building edges/borders/projections where contrasting color as specified and directed is to be applied) (b) The work shall be executed from authorized applicator through manufacturer of which the materials .i.e. Paint, Distemper, Putty etc. is proposed to be used by the contractor and approved by Garrison Engineer. (c) Cost of scafolding upto 10m hight of building is included in this item.(d.) ‘Memorandum of Understanding’ (MOU) with only one manufacturer mentioned in the contract, failing which the bid shall be liable to be rejected. (e) 05 years guarantee of painting work will be admissible after date of completion. |
| 110 | M&L for complete removal of existing treatment of wall and applying two coats of Oil bound distemper, over 1 mm thick wall care putty including necessary preparation of wall surfaces complete all as specified and as directed. |
| 111 | M&L preparation of old painted steel roof surfaces, over 10cm in with or girth and applying one coat of synthetic enamel roof paint complete all as specified and directed. |
| 112 | Taking down cement plaster on brick work of any description incl racking out joints and cleaning dust etc including removing rubbish material complete all as specified. |
| 113 | M&L for rendering 15mm thick in CM 1:6 on brick or concrete surface finished even and fair without using extra cement, complete all as specified and directed. |
| 114 | M&L for rendering 15mm thick in cement mortar 1:4 on fair faces of brick masonry or concrete surfaces of walls, chajja, fins facia etc upto 2 storie height mixed with water proofing compound (ISI marked) @ 3% by weight of cement or as per manufacturer’s instructions, finished even & smooth without using extra cement complete all as specified and directed. |
| 115 | Supply only integral water proofing compound etc complete all as specified and directed. |
| 116 | M&L for rendering 5 mm thick in cement mortar 1:3 on concrete surfaces in ceiling, finished even & smooth without using extra cement complete all as specified and directed. |
| 117 | M&L for rendering 10 mm thick in cement mortar 1:6 on concrete surfaces of wall, finished even & smooth without using extra cement complete all as specified and directed. |
| 118 | M & L for preparation of newly surfaces and applying two coat of oil bound distemper with roller on wall etc complete all as specified and directed. |
| 119 | M & L for preparation of newly surfaces and applying two coat of cement base paint with roller on wall etc complete all as specified and directed. |
| 120 | M & L for preparation of newly surface of ceiling and applying three coat of white wash complete all as specified and directed. |
| 121 | M & L for preparation of surfaces and applying one coat of oil bound distemper with roller on old treated surface of wall etc complete all as specified and directed. |
| 122 | M & L for preparation of old treated surface of ceiling and applying one coat of white wash complete all as specified and directed. |
| 123 | M & L for prepration of old treated steel surface of any description exceeding 10cm width or girth and applying one coat of synthetic enamelled paint complete all as specified and directed. |
| 124 | M & L for preparation of old treated wood or wood based surface of any description exceeding 10cm width or girth and applying one coat of synthetic enamel paint complete all as specified and directed. |
| 125 | M&L for obliterating old writing of any description, not exc 0.1 sqm with paint to match existing works complete all as specified and directed. |
| 126 | M&L for rewriting/repainting to existing writing letters or figures not exc 30 cm height in block Roman, Italian or Indian letters with synthetic enamel paint complete all as specified and directed. |
| 127 | M&L for Preparation old decorated plastered surfaces of wall and applying one coat of cement base paint all as specified and directed. |
| 128 | M&L for preparation of old decorated surface on wall and applying one coat of Exterior emulsion paint ( weather coat), complete all as specified and directed. |
| 129 | M&L for preparation of old decorated plastered surfaces of ceiling and applying one coat of oil bond distemper on ceiling complete all as specified and directed. |
| 130 | M&L for preparation of old painted wooden surfaces of any description n.exc 10 cm width or girth and applying one coat of synthetic enamel paint complete all as specified and directed. |
| 131 | M&L for preparation of old painted steel surfaces of any description n.exc 10 cm width or girth and applying one coat of synthetic enamel paint complete all as specified and directed. |
| 132 | M&L for preparation of old surface of any description over 10 cm girth or width and applying one coat plastic emulsion paint complete all as specified and directed. |
| 133 | S&F powder coated (min powder coating 50 micron) anodised aluminium frame for Partition/doors, windows , ventilators plain or sliding type with one or more rebates including joining cleat for fixing etc complete all as specified and as directed. |
| 134 | S&F powder coated (min thickness of powder coating 50 micron) anodised aluminium sliding door shutters , aluminium section weighing 0.55 kg/m including necessary joining cleats,glazing clips, rubber neoprene packing , handles 2 nos in each door , hinges , anodised aluminium snap beading screws etc complete all as specified and as directed. |
| 135 | S&F powder coated(powder coating min 50 micron) anodised window and ventilator shutters side hung/sliding type without sash , aluminium section weighing 0.55 kg/m including necessary joining cleats,glazing clips, rubber neoprene packing , anodised aluminium snap beading screws ,anodised aluminium fittings such as peg stays 150 mm long(1 no) hinges type B-21 100 mm long (2 no) suitable handle (1 no ) complete as specified |
| 136 | M&L for 4.80 mm thick frosted sheet glass quality and glazing fixed to aluminium frame n'exc 0.50 sqm complete all as specified and as directed. |
| 137 | Supply and fixing Sheet glass, 5.50mm thick ordinary quality, in squares, exceeding 0.50 sqm in each pane including one side affixed with one way vision film plain / pattern design of required colour, anti UV reflective and rubber packing etc complete all as specified and directed. |
| 138 | Supply and fixing factory made 6mm thick powder coated anodised aluminium composite panel exterior grade, plain/pattern design minimum 0.50 mm thick aluminium sheet both side on solid polyethylene core (fire resistant) fixing to aluminium frame with necessary jointing/cover strips and screws etc complete all as specified and directed. |
| 139 | M&L for providing and fixing stainless steel (Grade 304) ralling made of hollow tubes, channels, plates etc including welding grinding buffing, polishing and making curvature (where ever required) and fitting the same with necessary stainless steel bolts complete, including fixing the necessary accessories & stainless steel dash fasteners, stainless steel bolts etc of required size, on the top of floor or the side of waist slab with suitable arrangement complete all as specified and directed. Please Enable Macros to View BoQ information |
