|
| 1 | Construction of Gram Panchayat Office Building At. Givha Kute Tq. Malegaon Dist. Washim |
| 2 | Excavation for foundation in earth, soil of all types, sand, gravel and soft murum, including removing the excavated material up to a distance of 50 m. beyond the building area and stacking and spreading as directed, dewatering, preparing the bed for the foundation and necessary back filling, ramming, watering including shoring and strutting etc. complete. (Lift upto 1.5 m.) By Mechanical Means [Bd.A.1 P.No. 259] (S.S.R. I.No. 21.02) |
| 3 | Excavation for foundation in hard murum including removing the excavated material upto distance of 50 metres beyond the building area and stacking and spreading as directed, dewatering, preparing the bed for the foundation and necessary back filling, ramming, watering including shoring and strutting etc. complete. (Lift upto 1.50 m) By Mechanical Means [Bd.A.2 P.No. 259] (S.S.R. I.No. 21.06 ) |
| 4 | Providing and laying Cast in situ/Ready Mix cement concrete in M-10 of trap/ granite/quartzite/gneiss metal for foundation & bedding including bailing out water Steel centering formwork laying /pumping compacting roughening them if special finish is to be provided finishing if required & curing complete with fully automatic micro processor based PLC with SCADA enabled reversible Drum Type mixer/concrete Batch mix plant (Pan mixer) etc complete With fine aggregate (Natural Sand/Crushed sand VSI Grade finely washed etc) [Bd.E.1 P.No. 287] (S.S.R.I.No. 24.01) |
| 5 | Providing and laying in situ /Ready Mix cement concrete M-20 of trap / granite /quartzite/ gneiss metal for R.C.C. work in foundations like raft, strip foundations, grillage and footings of R.C.C. columns and steel stanchions etc. including bailing out water, Steel centering formwork, laying/pumping cover blocks,compaction & curing roughening the surface if special finish is to be provided (Excluding reinforcement & structural steel) etc. complete, with fully automatic micro processor based PLC with SCADA enabled reversible Drum Type mixer/ concrete Batch mix plant (Pan mixer) etc complete With fine aggregate (Natural Sand / Crushed sand VSI Grade finely washed etc) [Bd.F.3 P.No. 298 & B.7 P.No.38] (S.S.R.I.No. 25.11) |
| 6 | Filling in plinth and floors with contractors material/brought from outside and approved by Engineer incharge in layers of 15 cm to 20 cm including watering & compaction etc complete [Bd.A.11 P.No. 263] (S.S.R. I.No. 21.37 ) |
| 7 | Filling in plinth and floors with approved excavated material in 15cm. to 20cm. layers including watering and compacting etc. complete. [Bd.A.10 P.No. 262] (S.S.R. I.No. 21.36 ) |
| 8 | Providing and laying Cast in situ/Ready Mix cement concrete M-20 of trap / granite /quartzite/ gneiss metal for R.C.C. columns as per detailed designs and drawing or as directed including steel centering, formwork, cover blocks, laying/pumping compaction finishing the formed surfaces with cement mortar 1:3 of sufficient minimum thickness to give a smooth & even surface or roughening if special finish is to be provided & curing etc. complete, (Excluding reinforcement and structural steel).with fully automatic micro processor based PLC with SCADA enabled reversible Drum Type mixer/ concrete Batch mix plant (Pan mixer) etc. complete. With fine aggregate (Natural Sand / Crushed sand VSI Grade finely washed etc) [Bd.F.5 P.No. 300 & B.7, P.38] (S.S.R.I.No. 25.31) |
| 9 | Providing and laying Cast in situ/Ready Mix cement concrete M-20 of trap/granite/quartzite/gneiss metal for RCC beams & lintels as per detailed designs & drawings or as directed including steel centering formwork cover blocks laying/pumping compaction & roughening the surface if special finish is to be provided & curing etc complete (Excluding reinforcement & structural steel) with fully automatic micro processor based PLC with SCADA enabled reversible Drum Type mixer/concrete Batch mix plant (Pan mixer) etc complete With fine aggregate (Natural Sand/Crushed sand VSI Grade finely washed etc) [Bd.F.6 P.No. 300 & B.7 P.No.38] (S.S.R.I.No. 25.5) |
| 10 | Providing and laying Cast in situ/Ready Mixcement concrete M-20 of trap/ granite/ quartzite/ gneiss metal for R.C.C. chajja as per detailed design and drawings including steel centering, formwork, cover blocks, laying/pumping, compacting and roughening the surface if special finish is to be provided and curing complete. (Excluding reinforcement and structural steel). with fully automatic micro processor based PLC with SCADA enabled reversible Drum Type mixer/ concrete Batch mix plant (Pan mixer) etc. complete. With fine aggregate (Natural Sand / Crushed sand VSI Grade finely washed etc) (S.S.R.I.No. 26.05) |
| 11 | Providing and laying Cast in situ/Ready Mix cement concrete M-20 of trap/granite/quartzite/gneiss metal for RCC slabs & landings as per detailed designs & drawings including steel centering formwork cover blocks laying/pumping compaction finishing the formed surfaces with cement mortar 1:3 of sufficient minimum thickness to give a smooth & even surface or roughening if special finish is to be provided & curing etc complete(Excluding reinforcement and structural steel) with fully automatic micro processor based PLC with SCADA enabled reversible Drum Type mixer/concrete Batch mix plant (Pan mixer) etc complete With fine aggregate (Natural Sand/Crushed sand VSI Grade finely washed etc) [Bd.F8 P.No. 302 & B7 P.No.38] (S.S.R.I.No. 25.7) |
| 12 | Providing and fixing in position TMT-FE-500 bar reinforcement of various diameters for RCC pile caps footings foundations slabs beams columns canopies staircase newels chajjas lintels pardis copings fins arches etc as per detailed designs drawings & schedules including cutting bending hooking the bars binding with wires or tack welding & supporting as required complete [Bd.F.17 P.No 306] (S.S.R.I.No. 26.33) |
| 13 | Providing second class Burnt Brick masonry with conventional/ I.S. type bricks in cement mortar 1:6 in foundations & plinth of inner walls/in plinth external walls including bailing out water manually striking joints on unexposed faces raking out joints on exposed faces & watering etc complete [Bd.G. 1 P.No 313] (S.S.R.I.No. 27.01) |
| 14 | Providing second class Burnt Brick masonry with conventional/ I.S. type bricks in cement mortar 1:6 in superstructure including striking joints, raking out joints, watering and scaffolding etc. Complete (S.S.R.I.No. 27.05) |
| 15 | Providing second class Burnt Brick masonry with conventional/ I.S. type bricks in cement mortar 1:4 in half brick thick wall including mild steel longitudinal reinforcement of 2 bars of 6 mm diameter / 2 hoop iron strips 25 mm X 1.6 mm placed at every third course, properly bent and bonded at ends scaffolding, racking out joints and watering etc. complete. (S.S.R.I.No. 27.06) |
| 16 | Providing & fixing M40 grade thick vibrated pull cast or similar type concrete frame with chamfer conforming to I.S. 65241983 having 6mm dia bars 3 Nos & strips @250mm c/c & fixing in wall with 6 Nos of hold fast of 12mm dia bars 500mm long including primer & oil painting etc complete) frame size 60mmx125mm (S.S.R.I.No. 39.56) |
| 17 | Providing and fixing solid core flush door shutter in single leaf 32 mm thick decorative type of exterior grade as per detailed drawings approved face veneers 3 mm thick on both faces or as directed, all necessary beads, mouldings and lipping, wrought iron hold fasts, chromium plated fixtures and fastenings, with brass mortise lock, chromium plated handles on both sides, and finishing with French Polish etc. complete. (S.S.R.I.No. 39.09) |
| 18 | Providing and fixing in position. (as per I.S.1868 / 1982) Aluminium sliding window of two tracks with rectangular pipe having overall dimension 63.50 x 38.10 x 1.02 mm at weight 0.547 kg/Rmt. and window frame bottom track section 61.85 x 31.75 x 1.20 mm at weight 0.695 kg/Rmt. Top and side track section 61.85 x 31.75 x 1.30 mm at weight 0.659 kg/Rmt. The shutter should be of bearing bottom 40 x 18 x 1.25 mm at weight 0.417 kg/Rmt. Inter locking section 40 x 18 x 1.10 mm at weight 0.469 kg/Rmt. And handle section 40 x 18 x 1.25 mm at weight 0.417 kg/Rmt. and top section 40 x 18 x 1.25 mm at weight 0.417 kg/Rmt. As per detailed drawings and as directed by Engineer in charge with all necessary Aluminium sections fixtures and fastenings such as roller bearing in nylon casting and self locking catch fitted in vertical section of shutter including 5 mm thick plain glass with all required screws and nuts etc, complete. With colour Anodising with box. (S.S.R.I.No. 39.37) |
| 19 | Providing and fixing mild steel grill work for windows, ventilators etc. 20 kg/sqm as per drawing including fixtures, necessary welding and painting with one coats of anticorrosive paint and two coats of oil painting complete. (S.S.R.I.No. 40.01) |
| 20 | Providing internal cement plaster 12mm thick in single coat in cement mortar 1:4 without neeru finish to concrete or brick surfaces, in all positions including scaffolding & curing etc complete [Bd. L.2 P.No. 368] (S.S.R. I.No. 32.04 ) |
| 21 | Providing and applying Two coats of wall care Putty on plastered surface and Ceiling and Walls to prepare surface even and smooth of approved make, etc complete. (S.S.R. I.No. 32.34) |
| 22 | Providing neeru finish to plastered surfaces in all positions including scaffolding and curing etc. complete. (S.S.R. I.No. 32.15) |
| 23 | Providing internal cement plaster 20mm thick in two coats in cement mortar 1:4 without neeru finish, to concrete, brick surface, in all positions including scaffolding and curing etc.complete. [Bd.L.4 Page No. 368] (S.S.R. I.No. 32.07 ) |
| 24 | Providing and laying chequered tiles of approved quality of size 30 cm x 30 cm, confirming to corresponding I.S. for flooring in required position laid on a bed of 1:4 cement mortar including cement float, filling joint with cement slurry cleaning curing etc. complete. (S.S.R. I.No. 33.66) |
| 25 | Providing and laying vitrified mirror / glossy finish tiles decorative type having size 590 mm to 605 mm x 590 mm to 605 mm of 8 to 10 mm thickness and confirming to IS. 15622-2006 ( group Bla) of approved make, shade and pattern for flooring in required position laid on a bed of 1:4 cement mortar including neat cement float, filling joints, curing and clearing etc. complete. a) Flooring [Bd.M. 12 Page No.385] (S.S.R. I.No. 33.40) |
| 26 | Providing and applying plastic emulsion paint of approved quality, colour and shade to old & new surfaces in two coats including scaffolding preparing the surface (excluding the primer coat)etc. complete. [Bd.P.6 Page No. 414] (S.S.R.I.No. 36.12) |
| 27 | Providing and applying two coats of water proof cement paint of approved manufacture and of approved colour to the plastered surfaces including scaffolding if necessary, cleaning and preparing the surface, watering for two days etc. complete. [Bd.0.8 P.No. 406] (S.S.R.I.No. 35.13) |
| 28 | Providing and fixing board displaying information, such as 'Name of work, Name of Contractor, Work completion and liability period etc, having rectangular shape of 0.90mx0.60m size made out G.I. sheet painted with oil paint MS angle of size 50x50x6mm frame with properly MS angles including etc & fixing the boards in C.C. M10 concrete block of size 45cmx 45cm x60cm including excavation refilling transportation & labour etc complete [As directed by Engineer in Charge] (As per rate analysis) Please Enable Macros to View BoQ information |
