Sales : +91-777 804 8217
| Sl. No. | Item Description |
| 1 | B/R PORTION |
| 2 | Taking down chowkhats or frame with shutters (without taking off shutters from the frame) not exc. 1.5 Sqm each, complete all as specified and directed. |
| 3 | Taking down chowkhats or frame with shutters (without taking off shutters from the frame) exc. 1.5 Sqm but not exc. 4.0 Sqm each, complete all as specified and directed. |
| 4 | Taking down shutters of any description not exc 1.0 sqm each, complete all as specified and directed. |
| 5 | Taking down shutters of any description exc 1.0 sqm and not exc 2.0 sqm each, complete all as specified and directed. |
| 6 | Demolition of cement concrete (unreinforced) in ground floors and pavings not exc 15 cm thickness (below or above ground level), complete all as specified and directed. |
| 7 | Demolition of reinforced cement concrete in roofs, floors (other than ground floors), beams, staircases, landing, chajjas and similar suspended work, complete all as specified and directed. |
| 8 | Separating, scraping and cleaning of reinforcement (Demolition of RCC shall be measured and paid separately under relevant item), complete all as specified and directed. |
| 9 | Dismantling posts or struts (wood, steel or R.C.C.) any section embedded in concrete, brick work, masonry etc., including taking out embedded portion and making good disturbed ground, complete all as specified and directed. |
| 10 | Dismantling wrought iron or mild steel work of any description not otherwise provided for, complete all as specified and directed. |
| 11 | Demolition of brickwork or stone/ boulder masonry, built in cement mortar including all quoins, arches, pillars, etc, but excluding ashlar facings, dressed stonework and precast concrete articles, complete all as specified and directed. |
| 12 | Dismantling asbestos cement (corrugated, semi-corrugated etc) sheets in roof coverings, complete all as specified and directed. |
| 13 | Dismantling wall and ceiling boards (fibre, pulp, insulation, etc.) or insulation boards/ slabs/ blankets, any thickness, including cover fillets, complete all as specified and directed. |
| 14 | Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing), removing and rubbish off the premises, complete all as specified and directed. |
| 15 | Demolition of stone slabs and tiles of any description or thickness in floors, aprons etc., laid, bedded and pointed in any mortar, complete all as specified and directed. |
| 16 | Taking down cement plaster on brick or stone walls, etc. including raking out joints, hacking for key, scrubbing down with water, etc., complete all as specified and directed. |
| 17 | Taking up or down old steel tubing 25 mm bore and connections from trenches/ floor/ wall including cleaning for refixing or removal to store, complete all as directed.Note:- Excavation and earth work shall be measured and paid seperately under relevant item. |
| 18 | Taking up or down old steel tubing 50 mm bore and connections from trenches/ floor/ wall including cleaning for refixing or removal to store, complete all as directed.Note:- Excavation and earth work shall be measured and paid seperately under relevant item. |
| 19 | Excavation in trenches, not exc. 1.5 m wide and not exc. 1.5 m in depth; for foundation, etc. or for shafts, wells, cesspits, manholes, pier holes, laying pipe, cable, etc. n exc 10 sqm on plan and not exc. 1.5 m in depth and getting out in soft/ loose soil, complete all as specified and directed. |
| 20 | Returning, filling in, including spreading, levelling, watering and well ramming in layers not exc 25 cm in soft/ loose soil, complete all as specified and directed. |
| 21 | Removing excavated soil to a distance not exc. 50m and depositing where directed at a level not exc. 1.5 m above the starting point, complete all as specified and directed. |
| 22 | Removing building materials etc. to a distance of 100m or under, beyond the lead included in the rates, including loading, unloading and stacking at the destination, complete all as specified and directed. |
| 23 | Material and labour for, hardcore of broken stone boulders of gauge not exc.63 mm, deposited, spread and levelled in layers n exc. 15 cm thick, watered and rammed/ rolled to a true surface, complete all as specified and directed. |
| 24 | Materials and labour for plain cement concrete (1:4:8) type D2 (using 40 mm graded broken stone aggregate) as in foundations, filling and mass concrete, complete all as specified and directed. |
| 25 | Materials and labour for plain cement concrete (1:3:6) type C2 (using 40 mm graded broken stone aggregate) as in foundations, filling and mass concrete, complete all as specified and directed. |
| 26 | Material and labour for RCC M30 (Design Mix) (using 20mm graded broken stone aggregate) as in foundations, including rafts, footings, foundation beams; plinth beams, bases for columns, etc.; basement slabs, under-reamed piles and mass concrete, complete all as specified and directed. |
| 27 | Material and labour for, RCC M30 (Design Mix) (using 20mm graded broken stone aggregate) as in columns, pillars, piers, posts and struts, complete all as specified and directed. |
| 28 | Material and labour for, RCC M25 (Design Mix) (using 20mm graded broken stone aggregate) as in slabs supported on walls, beams and columns in floors, roofs, landings, balconies, canopies, deck slabs and in shelves and the like, complete all as specified and directed. |
| 29 | Materials and labour for, plain cement concrete (1:3:6) type C1 (using 20 mm graded broken stone aggregate) as in coping, kneelers, apex stones, bed plates, kerbs, troughs and the like including weathering, slightly rounded or chamfered angles and throating, complete all as specified and directed. |
| 30 | Material and labour for, plain cement concrete (1:3:6) type C1 (using 20mm graded broken stone aggregates) for filling pressed steel chowkats, complete all as specified and directed. |
| 31 | Material and labour for, PCC (1:2:4) type B0 (using 12.5mm graded broken stone aggregate) as in coping, kneelers, apex stones, bed plates, kerbs, troughs and the like including weathering, slightly rounded or chamfered angles and throating, complete all as specified and directed. |
| 32 | Material and labour for, brickwork with subclass ‘B’ bricks, old size, straight or curved on plan exc. 6m mean radius built in cement mortar (1:6), complete all as specified and directed. |
| 33 | Material and labour for, brickwork with sub class ‘B’ bricks, old size brick, straight or curved on plan to any radius in half brick thick walls built in CM (1:4), complete all as specified and directed. |
| 34 | Material and labour for, granite (of any type) work (table rubbed and polished) in steps, jambs, pillars, window-cills, cooking platforms and like in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite, complete all as specified and directed. |
| 35 | Material and labour for, use and waste of formwork to sides of concrete foundations, footings, bases of columns, raft and raft beams, sides and soffits (if any) of foundation and plinth beams; and similar work; vertical or to batter, rough finished surfaces of concrete, complete all as specified and directed. |
| 36 | Material and labour for, use and waste of formwork to sides of pillars, posts, struts, piers, columns and stanchions, rough finished surfaces of concrete, complete all as specified and directed. |
| 37 | Material and labour for, use and waste of formwork to soffits of suspended slabs such as roof slabs, floor slabs, landings and similar work; not exceeding 200mm thick (Horizontal or sloping) rough finished surfaces of concrete, complete all as specified and directed. |
| 38 | Supply and fix for, 30mm thick flush shutters, solid core construction, with block board core and plywood face panels, commercial type on both sides, complete all as specified and directed. |
| 39 | Supply and fix for, factory made 35mm thick 2nd class hard wood glazed and skeleton shutters, open rebated and prepared to receive glass, gauze etc. divided in square with plain, chamfered or rounded mitred and rebated sash bars any number, edges of framing plain , chamfered or rounded, fitted with cut and mitered beads for securing glass etc, complete all as specified in SSR Part I section 8, clause 8.24(a), complete all as specified and directed. |
| 40 | Supply and fix for, factory made single extruded WPC (Wood Polymer Composite) solid door/ window/ Ceosetory windows and other Frames/ Chowkhat of size 45X70 mm comprising of virgin PVC polymer of K value 58-60 (Suspension grade), calcium carbonate and natural fibers (wood powder/ rice husk/ wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) fabricated with miter joints after applying PVC solvent cement and screwed with full body threaded star headed SS screws having minimum frame density of 750 kg/ cum, screw withdrawal strength of 2200 N (Face) and 1100 N (Edge), minimum compressive strength of 58 N/mm2, modules of elasticity 900 N/mm2 and resistance to spread of flame of Class A category with property of being termite/ borer proof, water/ moisture proof and fire retardant and fixed in position with MS hold fast/ lugs/ SS dash fasteners of required dia and length complete as per directed. (M.S. hold fast/ lugs or SS dash fasteners shall be measured and paid for separately under relevant item).Note: For WPC solid door/ window frames, minus 5mm tolerance in dimension i.e. depth and width of profile shall be acceptable. Variation in profile dimensions on plus side shall be acceptable but no extra payment on this account shall be made. |
| 41 | Supply and fix for, factory made single extruded WPC (Wood Polymer Composite) solid plain flush door shutter of 30mm size comprising of virgin polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/ wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) having minimum density of 650 kg/cum and screw withdrawal strength of 1800 N (Face) and 900 N (Edge), minimum compressive strength 50 N/mm2, modulus of elasticity 850 N/mm2 and resistance to spread of flame of Class 'A' category with property of being termite /borer proof, water/ moisture proof and fire retardant and fixing with stainless steel butt hinges of required size with, necessary full body threaded star headed counter sunk S.S screws, complete all as specified and directed. (Note: stainless steel butt hinges and necessary SS screws shall be measured and paid separately under relevant item). |
| 42 | Supply and fix for, 150 mm long anodized aluminium barrel tower bolt of extruded section, complete all as specified and directed. |
| 43 | Supply and fix for, 200 mm long anodized aluminium barrel tower bolt of extruded section, complete all as specified and directed. |
| 44 | Supply and fix for, 150 mm size anodized aluminium handles, cast type, complete all as specified and directed. |
| 45 | Supply and fix for, 100 mm stainless steel butt hinges medium weight cold rolled mild steel, complete all as specified and directed. |
| 46 | Supply and fix for, 300 mm long aluminium anodized sliding door bolt with hasp staple (bolt type) and fixing clips of sheet cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast aluminium alloy, complete all as specified and directed. |
| 47 | Supply and fix for, mild steel screw bolts of dia 10mm (machine made) with hexagonal or square heads at one end and screwed the other, or screwed both ends, each screwed end to be fitted with washers and one hexagonal or square nut, exc 5 cm but not exc 10 cm long, complete all as specified and directed. |
| 48 | Supply and fix for, mild steel rag or lewis bolts of 12mm dia, screwed one end, with hexagonal or square nuts and washers, the other end enlarged and jagged or lewised, not exc 15 cm long, complete all as specified and directed. |
| 49 | Supply and fix for, hand rails, half round or other steel section or core for wooden hand-rail straight portion, drilled and countersunk for balusters running bars, for doors, balusters, nosing to steps including embeding in concrete and screwing etc. wind ties for roof including securing bolts;posts and struts in fencing including cutting tops to shape as directed, drilling holes, notching for wire, etc.; flat iron fillets (for securing wire mesh etc.) including all necessary drilling, bolting or riveting, etc., and similar work conforming to Fe-290 Gde E-165, complete all as specified and directed. |
| 50 | Supply and fix for, mild steel framed work such as grills, gratings, etc. with ends of bars shouldered and/ or riveted, or forged into spikes; framed guard bars; barred iron doors; ladders; framed balusters; walk ways; railings; framework of water tanks and similar work conforming to Fe.290.Gde-E-165, complete all as specified and directed. |
| 51 | Supply and fix for, rolled mild steel structural steel work, framed as in trusses, purlins, rafter, post, cleats etc. conforming to grade E-250 (Fe-410W, quality A) including shaped washers including necessary cutting required length, notching drilling, riveting and or welding or connecting with nut bolts with angle cleats, fish plat, gusset plate and also erecting in true position complete as specified and directed. |
| 52 | Supply and fix for, rolled mild steel gusset plates (plain or chequered) channels, square cut or notched (ordinary and counter sunk) forming holes, without any attachment, complete all as specified and directed. |
| 53 | Supply and fix for, rolled mild steel joist, channel, angle, or tee sections, fixed independently, without connecting plates, etc. (cut to ordinary lengths i.e. within 20mm of the length indicated) conforming to Fe 410-W (Gde-E-250) quality-A, complete all as specified and directed. |
| 54 | Supply and fix for, compound girders and stanchions, lattice girders, aerial masts, staging for water tanks and the like including caps, bases, splices etc. built up from two or more beam or channel sections or angles with plates, including all lattice bars, stiffeners, gusset plates, etc., complete all as specified and directed. |
| 55 | Supply and fix for, rolled mild steel sections as in main and cross beams, hip and jack rafters; purlins where connected to common rafters and running rails and guides for sliding doors; fixed with angle cleats or other connecting plates conforming to Fe 410 - W (Gde - E- 250) quality-A, complete all as specified and directed. |
| 56 | Supply and fix for, rolled mild steel work in tubular trusses including special shaped washer etc. complete using ERW or induction butt welded tubes conforming to I.S.1161-1979 grade St.-240, complete all as specified and directed. |
| 57 | Supply and fix for, rolled mild steel framed work as in doors or gates of angle or other section with gusset plates, rails, braces, etc., complete, drilled for fixing of steel sheeting or other covering. Doors, etc. to be prepared for hanging or sliding with and including either hooks and hinges or steel hanging door fittings (exclusive of steel sheeting or other covering, running rails and guides) and hanging; also fastening conforming to Fe 410-W (Gde-E- 250) quality-A, complete all as specified and directed. |
| 58 | Supply and fix for, mild steel TMT bars 10mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips, complete all as specified and directed. |
| 59 | Material and labour for, mild steel TMT bars 5mm dia and over upto and including 10mm dia in stirrups, spacers and binders, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips, complete all as specified and directed. |
| 60 | Supply and fix for, pressed steel frames 125 x 60mm size for doors with one or more rebates including necessary fixing lugs, hinges, lock strike plate, etc., complete all as specified and directed. |
| 61 | Supply and fix for, powder coated aluminium (minimum thickness of powder coating 50 micron) work for doors, windows, ventilators and partitions (Fixed portions) with extruded built up standard tubular sections/ appropriate Z sections and other sections of approved make conforming to IS: 733 and IS:1285, fixing with dash fasteners of required dia and size, including necessary filling up the gaps at junctions, i.e. at top, bottom and sides with required EPDM rubber/ neoprene gasket etc. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, Aluminium snap beading for glazing/ paneling, C.P. brass/ stainless steel screws, complete all as specified and directed. |
| 62 | Supply and fix for, powder coated aluminium (minimum thickness of powder coating 50 micron) for shutters of doors, windows and ventilators including providing and fixing hinges/ pivots and making provision for fixing of fittings wherever required including the cost of EPDM rubber/ neoprene gasket required (Fittings shall be paid for separately) with extruded built up standard tubular sections/ appropriate Z sections and other sections of approved make conforming to IS: 733 and IS:1285, fixing with dash fasteners of required dia and size, including necessary filling up the gaps at junctions, i.e. at top, bottom and sides with required EPDM rubber/ neoprene gasket etc. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, Aluminium snap beading for glazing/ paneling, C.P. brass/ stainless steel screws complete all as specified and directed. |
| 63 | Material and labour for, stainless steel (Grade 304) railing made of hollow tubes, channels, plates etc., including welding, grinding, buffing, polishing and making curvature (where ever required) and fitting the same with necessary stainless steel nuts and bolts complete, including fixing the railing with necessary accessories and stainless steel dash fasteners, stainless steel bolts etc., of required size, on the top of floor or the side of waist slab with suitable arrangement, complete all as specified and directed. |
| 64 | Supply and fix for, soft auto close on hinge bright finish (Auto close hinges), complete all as specified and directed. |
| 65 | Supply and fix for, 125 mm dia oval shape SS handle, fancy type, bright finish, complete all as specified and directed. |
| 66 | Supply and fix for, stainless steel (SS 304 grade) basket (plain) suitable for modular kitchen hardware of approved quality of size 520 x 485 x 100 mm, complete all as specified and directed. |
| 67 | Supply and fix for, stainless steel (SS 304 grade) plate basket (plain) suitable for modular kitchen hardware of approved quality of size 520 x 485 x 100 mm, complete all as specified and directed. |
| 68 | Supply and fix for, stainless steel (SS 304 grade) cup and saucer basket (plain) suitable for modular kitchen hardware of approved quality of size 520 x 485 x 100 mm, complete all as specified and directed. |
| 69 | Supply and fix for, stainless steel (SS 304 grade) cutlery and spoon basket (plain) suitable for modular kitchen hardware of approved quality of size 520 x 485 x 100 mm, complete all as specified and directed. |
| 70 | Supply and fix for, modular kitchen trolly channel mild steel 50 cm long medium size suitable for handle appropriate weight extruded MS galvanised over roller, complete all as specified and directed. |
| 71 | Supply, cut to size, fix and support, 25 mm dia stainless steel curtain rod (Grade SS 304) with decorative end finials and stainless steel wall mounted decorative brackets, complete with screws, wall plugs, end caps/ finials and installation. The rod shall be straight (or extendable as specified) and finished to suit the interior decor (e.g., satin brushed, polished mirror or powder coated matter). Provide factory finished stailess steel brackets designed to match the rod, spaced as required (typically two brackets per up to 1.5 m span three or more for longer). All mounting to be levelled, plumbed and secured. Adjust rod length to clear the finished opening, extend approx. 150-200 mm each side beyond the curtain width unless otherwise specified including full testing/ smooth movement of curtain, complete all as specified and directed. |
| 72 | Supply only chain link MS galvanised fencing, any size or type, complete all as specified and directed. |
| 73 | Fixing only chain link fencing including line wires, any mesh, size and type to any type of standards, rails, straining bolts, etc. including provission of binding wire, complete all as specified and directed. |
| 74 | Supply and fix for, pre-painted galvalume aluminum zinc coating GI based corrugated steel sheet 0.50mm thick of an colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws or 'J'/ 'L' hooks, complete all as specified and directed. |
| 75 | Supply and fix for, pre-painted galvalume aluminum zinc coating GI based plain steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in ridges, gutters, facia board etc. fixed with self tapping screws or 'J'/ 'L' hooks, complete all as specified and directed. |
| 76 | Taking down carefully existing bituminous felt including plaster lime or concrete of any thickness and cleaning of the surfaces of roof, terrace including flushing and junction of parapets, kerb walls, PCC fillets benching etc. with wire brushes and removing of rubbish outside ministry of defence land of any lead, complete all as directed. |
| 77 | Material and labour for, rendering 10 mm thick cement plaster on existing concrete roof surfaces in cement mortar (1:4) mixed with water proofing compound @3% by weight of cement, finished even and smooth without using extra cement and providing one coat of applied bituminous primer over cleaned surfaces @ 0.30 litre per sqm, applying one coat of polymeric modified bitumen 85/25 @ 1.2 Kg/ Sqm over bituminous primer then followed by APP modified five layer polymeric membrane 3 mm thick minimum weight 3.6 Kg per Sqm reinforced with polyester non woven fabric (weighting not less than 150 gm per sqm) laid as per the manufacturer's instruction with tranverse side lap of 75 mm and longitudinal lap of 100 mm with torching complete all as specified in Para 11.44.5 of SSR Part-I and directed. |
| 78 | Supply and fix for, Gl frame work for seamless ceiling comprising of Gl perimeter channnel 0.55 mm thick with two unequal flanges of 20 and 30 mm and web of 27 mm fixed to surrounding wall using nylon sleeves and screws at 450 mm centre to centre/ intermediate channel 0.9 mm thick having two equal flanges of 15 mm each and web of 45 mm suspended from soffit at approx 900 mm centre to centre with Gl cleat and steel expansion fasteners with and including ceiling section (not exc 1.2 m length) of 0.55 mm thickness having kurled web of 50 mm and flange of 26 mm each with lips of 10.5 mm fixed to the intermediate channel with connecting clips across the intermediate channel at 457 mm centre to centre including hangers 6 mm dia. G.I. (upto 1200mm length) adjusting level fixed to roof slabs by means of ceilling cleats made out of G.I. flat 40 x 3 mm size 60mm long and expansion hold fasteners 12.5mm dia. 40mm long including provision gypsum board 12mm thick in ceiling fixed with screw as per manufacturers instructions, complete all as specified and directed. |
| 79 | Material and labour for, 75 mm thick plain cement concrete (1:4:8) type D2 (using 40 mm graded broken stone aggregate) as in sub base floor, complete all as specified and directed. |
| 80 | Material and labour for, 50 mm thick plain cement concrete (1:2:4) type B2 (using 40mm graded broken stone aggregate) as in floor finished, even and smooth without using extra cement, complete all as specified and directed. |
| 81 | Material and labour for, 100 mm thick plain cement concrete (1:3:6) type C2 (using 40mm graded broken stone aggregate) as in floor finished, even and smooth without using extra cement, complete all as specified and directed. |
| 82 | Material and labour for, 25 mm thick plain cement concrete (1:2:4) type B1 (using 20 mm graded broken stone aggregate) as in levelling course, complete all as specified and directed |
| 83 | Material and labour for, 50mm thick plain cement concrete (1:3:6) type C2 (using 40mm graded broken stone aggregate) as in plinth protection, finished even and smooth without using extra cement, complete all as specified and directed. |
| 84 | Materials and labour for, glazed ceramic coloured tiles, 450 X 300 X 7 mm thick, on vertical surface of wall such as dados, skirting etc, set and jointed in neat cement slurry and pointed in white or colour cement to match over and including 10mm thick backing coat in cement mortar (1:4), complete all as specified and directed. |
| 85 | Material and labour for, non skid ceramic coloured tiles, 7 to 8mm thick (square/ rectangular) area of each tile exc.0.11 Sqm but not exc.0.18 Sqm as in floors, set and jointed in neat cement slurry and pointed in white or coloured cement to match over and including 15mm thick screed bed or bedding in cement mortar (1:6), complete all as specified and directed. |
| 86 | Material and labour for, non skid ceramic coloured tiles, 7 to 8mm thick (square/ rectangular) area of each tile exc.0.18 Sqm but not exc.0.38 Sqm as in floors, set and jointed in neat cement slurry and pointed in white or coloured cement to match over and including 15mm thick screed bed or bedding in cement mortar (1:6), complete all as specified and directed. |
| 87 | Material and labour for, non skid ceramic coloured tiles, 7 to 8mm thick (square/ rectangular) area of each tile exc.0.18 Sqm but not exc.0.38 Sqm as in skirting, dado or vertical surface, set and jointed in neat cement slurry and pointed in white or coloured cement to match over and including 10mm thick backing coat or bedding in cement mortar (1:4), complete all as specified and directed. |
| 88 | Material and labour for, double charged vitrified ceramic light shade tiles, 10 mm thick (square/ rectangular) polished, area of each tile exc.0.36 Sqm but not exc.0.42 Sqm as in floors, set and jointed in neat cement slurry and pointed in white or coloured cement to match over and including 15mm thick screed bed or bedding in cement mortar (1:6), complete all as specified and directed. |
| 89 | Material and labour for, double charged vitrified ceramic light shade tiles, 10 mm thick (square/ rectangular) polished, area of each tile exc.0.36 Sqm but not exc.0.42 Sqm as as in skirting, dado or vertical surface, set and jointed in neat cement slurry and pointed in white or coloured cement to match over and including 10mm thick screed bed or bedding in cement mortar (1:4), complete all as specified and directed. |
| 90 | Material and labour for, 20 mm thick coloured Endura parking tiles area exc.0.06 Sqm but not exc.0.11 Sqm each, textured finish, set and jointed in neat cement slurry and pointed in white cement mixed with pigment to match colour over and including 20mm thick screed bed or bedding in cement mortar (1:4), complete all as specified and directed. |
| 91 | Material and labour for, cement concrete tiles 20cm x 20cm x 20mm thick with grey cement and pigments, machine pressed; set jointed and pointed in neat cement slurry in floors, and cut and polished, including 15mm thick screed bed or bedding in cement mortar (1:6), complete all as specified and directed. |
| 92 | Material and labour for, providing and laying 60mm thick factory made chamfered edge cement concrete paver block of M-35 grade with approved colour, design & pattern as in footparth, parks, lawns, drive ways or light traffic parking etc., of required strength, thickness & size/ shape, made by table vibratory method using PU mould, laid in required colour & pattern over and including 50mm thick compacted bed of fine sand, compacting and proper embedding/ laying of inter locking paver blocks into the sand bedding layer through vibratory compaction by using plate vibrator, filling the joints with sand and cutting of paver blocks as per required size and pattern, finishing and sweeping extra sand; complete all as specified and directed. |
| 93 | Material and labour for, machine cut kota stone slab flooring 20-25mm thick over cement screed base laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing including 15mm thick screed bed or bedding in cement mortar (1:6), complete all as specified and directed. |
| 94 | Material and labour for, kota stone slab 20-25mm thick in riser of steps, skirting, dado and pillar etc., set and jointed in neat cement slurry and pointed in white or colour cement to match laid over and including 10mm thick backing coat in cement mortar (1:3), complete all as specified and directed. |
| 95 | Material and labour for, kota stone slab 20-25mm thick in tread of steps bullnosing on exposed surface 2mm x 2mm grooves 02 Nos on edge, set and jointed in neat cement slurry and pointed in white or colour cement to match laid over and including 20 mm thick screed bed in cement mortar (1:4), complete all as specified and directed. |
| 96 | Material and labour for, forming 20 mm thick expansion joints for 150 mm thick concrete slab, filled with pre-formed bituminous filler and top 30mm primed and sealed with sealing compound, Grade ‘A’, complete all as specified and directed. |
| 97 | Material and labour for, rendering 10 mm thick, cement plaster, in cement mortar (1:6) on fair faces of brick work or concrete surfaces on walls, finished fair and even, complete all as specified and directed. |
| 98 | Materials and labour for, rendering 15 mm thick, cement plaster, in cement mortar (1:4) on fair faces of brick work or concrete surfaces on walls and finished even and smooth without using extra cement, complete all as specified and directed. |
| 99 | Material and labour for, rendering 15mm thick cement plaster, in cement mortar (1:4) (in two coats of 10mm thick in CM (1:4) and 5mm thick in CM (1:4) finishing coat mixed with water proofing compound as per manufacturer's instruction) on stone masonry surfaces or surfaces other than fair faces of brick work or one side of lathing, complete all as specified and directed. (Note: Water proofing compound shall be measured and paid separately under relevant item). |
| 100 | Material and labour for, rendering 5 mm thick, cement plaster, in cement mortar (1:3) on fair faces of concrete surfaces on ceiling, finished even and fair, complete all as specified and directed. |
| 101 | Supply only integral water proofing compound complete all as specified. |
| 102 | Material and labour for, preparation of newly plastered wall surfaces and applying three coats of white wash, complete all as specified and directed |
| 103 | Material and labour for, preparation of newly plastered surfaces of wall and applying two coats of oil bound distemper of approved tint and pattern over one coat of primer over a coat of 3mm thick wall care putty on wall, complete all as specified and directed |
| 104 | Material and labour for, preparation of newly plastered wall surfaces and applying two coats of cement base paint over a coat primer, complete all as specified and directed. |
| 105 | Material and labour for, preparation of new plastered surfaces and finishing walls with acrylic smooth exterior weather proof paint of required shade : New work (Two or more coat applied @ 1.67 ltr/10 sqm over and including priming coat of exterior primer applied @ 2.20 kg/10 sqm) in camouflage pattern, complete all as specified and directed.Note :- Shade of Camouflage pattern shall be approved by GE. |
| 106 | Material and labour for, preparation of newly plastered surfaces of ceiling and applying two coats of oil bound distemper of approved tint and pattern over one coat of primer over a coat of 3mm thick wall care putty on ceiling, complete all as specified and directed |
| 107 | Material and labour for, complete removal of existing treatment on plastered wall surfaces and applying two coats of oil bound distemper over a coat of primer including preparation of surfaces, complete all as specified and directed. |
| 108 | Material and labour for, complete removal of existing treatment on plastered ceiling surfaces and applying two coats of oil bound distemper over a coat of primer including preparation of surfaces, complete all as specified and directed. |
| 109 | Supply and fix for, 4mm thick sheet glass, ordinary quality and glazing with oil putty in square exc 0.5 sqm in each pane, complete all as specified and directed. |
| 110 | Supply and fix for, 4mm thick figured glass, pin head type and glazing with oil putty in squares not exc 0.5 sqm in each pane, complete all as specified and directed. |
| 111 | Material and labour for, preparation of new or previously untreated surfaces of wood and wood based surfaces of any description, not otherwise described, over 10cm width or girth and applying two coats of synthetic enamel paint over a coat of pink primer, complete all as specified and directed. |
| 112 | Material and labour for, complete removal of existing treatment of old wood and wood based surfaces of any description, not otherwise described, over 10cm width or girth and applying two coats of synthetic enamel paint over a coat of pink primer including preparation of surfaces, complete all as specified and directed. |
| 113 | Material and labour for, preparation of new or previously untreated surfaces of steel and iron surfaces of any description, not otherwise described, over 10cm width or girth and applying two coats of synthetic enamel paint over a coat of red oxide zinc chrome primer, complete all as specified and directed. |
| 114 | Material and labour for, complete removal of existing treatment of old painted steel and iron surfaces of any description, not otherwise described, over 10cm width or girth and applying two coats of synthetic enamel paint over a coat of red oxide zinc chrome primer including preparation of surfaces, complete all as specified and directed. |
| 115 | Material and labour for, brushing neat cement slurry with 3.0 Kg of cement per sqm, complete all as specified and directed. |
| 116 | Material and labour for, polythene film, 150 micron thick, laid on a coat of bitumen primer, @ 0.30 to 0.50 Kg per sqm, complete all as specified and directed. |
| 117 | Materials and labour for, plain cement concrete (1:5:10) type E-2 (using 40 mm graded broken stone aggregate) as in filling and mass concrete in sunken portion, complete all as specified and directed. |
| 118 | Material and labour for, rendering 15 mm thick, cement plaster, in cement mortar (1:4) on fair faces of brick or concrete surafces (in sunken portion) mixed with water proofing compound as per manufacturer's instruction, finished the surface even and smooth without using extra cement, complete all as specified and directed. (Note: Water proofing compound shall be measured and paid seperately under relevant item). |
| 119 | Supply and fix 15mm bore tubes, 'medium grade' galvanised, with all fitting and fixed complete to walls and ceilings or laid in floors including taking up or down steel tubing and connections, including cleaning for refixing or removal to store, complete all as specified and directed. |
| 120 | Supply and fix for 20mm bore tubes, 'medium grade' galvanised, with all fitting and fixed complete to walls and ceilings or laid in floors including taking up or down steel tubing and connections, including cleaning for refixing or removal to store, complete all as specified and directed. |
| 121 | Supply, laying, jointing and testing for, GI steel tubing 25 mm bore 'medium grade' with all fitting and fixed complete laid in trenches or along walls and ceilings or laid in floors, complete all as specified and directed. |
| 122 | Supply, laying, jointing and testing for, GI steel tubing 50 mm bore 'medium grade' with all fitting and fixed complete laid in trenches or along walls and ceilings or laid in floors, complete all as specified and directed. |
| 123 | Supply and fix for, 50 mm bore dia gun-metal, globe or gate valves, with iron wheel head, screwed both ends for iron pipe and fixed, complete all as specified and directed. |
| 124 | Supply and fix for, 25 mm bore dia gun-metal, globe or gate valves, with iron wheel head, screwed both ends for iron pipe and fixed, complete all as specified and directed. |
| 125 | Material and labour for, cutting existing steel tubing water supply and insert 'Tee' for branch pipe of any size and dia including earth work, complete all as specified and directed. |
| 126 | Supply and fix in repairs for, bib tap, fancy type, brass chromium plated with crutch or butterfly handle, screwed down, screwed for iron pipe or brass ferrule of 15 mm bore, complete all as specified and directed. |
| 127 | Supply and fix in repair for, two way bib taps CP brass fancy type with crutch or butterfly handle screwed down screwed for iron pipe or brass ferrule 15 mm bore, complete all as specified and directed. |
| 128 | Supply and fix in repair for, stop valves, cast copper alloy, chromium plated, screwed down, high pressure, with crutch or butterfly handle, screwed both ends for iron pipe or for unions 15 mm bore, complete all as specified and directed. |
| 129 | Supply and fix in repair for, angle/ stop valve, with long shank and cup (concealed type) cast copper alloy, screwed down, high pressure, with crutch or butterfly handle, screwed both ends for iron pipe or for unions of 15mm bore, complete all as specified and directed. |
| 130 | Supply and fix in repair for, pillar taps, fancy type, cast copper alloy, with capstan heads, fancy type, chromium plated, screwed down high pressure, with or without lettered 'Hot' or 'Cold' with long screwed shanks and fly-nuts, screwed for 15mm bore iron pipe, complete all as specified and directed. |
| 131 | Supply, hoisting and fixing in position of rotational moulded HDPE water storage tanks 3 layers (cylindrical vertical with closed top) of 500 litres capacity with ISI marked including 20mm bore dia ball valves high pressure of PTMT with epoxy coated Aluminium rod & high density plastic ball screwed for iron pipe and dismantling old unserviceable water tank, complete all as specified in SSR Part I and directed. |
| 132 | Supply, hoisting and fixing in position of rotational moulded HDPE water storage tanks 3 layers (cylindrical vertical with closed top) of 1000 litres capacity with ISI marked including 20mm bore dia ball valves high pressure of PTMT with epoxy coated Aluminium rod & high density plastic ball screwed for iron pipe, complete all as specified in SSR Part I and directed. |
| 133 | Supply, hoisting and fixing in position of rotational moulded HDPE water storage tanks 3 layers (cylindrical vertical with closed top) of 1000 litres capacity with ISI marked including 20mm bore dia ball valves high pressure of PTMT with epoxy coated Aluminium rod & high density plastic ball screwed for iron pipe and dismantling old unserviceable water tank, complete all as specified in SSR Part I and directed. |
| 134 | Supply and fix in repair for, 20mm bore gun-metal, globe or gate valves, with iron wheel head, screwed both ends for iron pipe, complete all as specified and directed. |
| 135 | Supply and fix in repair for, vitreous china squatting pan, ‘Orissa’ pattern, size 580 x 440 mm white, with integral foot rests (excluding flushing cistern and flush pipe), connection to trap and to flushing cistern anti syphonage pipe including provision of PCC or lime concrete bedding and removal of debris, complete all as specified and directed. |
| 136 | Supply and fix in repair for, vitreous china wash down water closet pan 'P' or 'S' traps (EWC) (pedestal pattern), coloured (including fixing bolts but excluding flushing cistern and flush pipe) with and including plastic water closet seat, closed pattern with flat bottom, and cover and mild steel chromium plated or aluminised hinging device, including making good to floor, complete all as specified and directed. |
| 137 | Supply and fix in repair for, 10 litres capacity PVC valveless, syphonic action type, flushing cistern, low level, white, with inlet, ball valve, float and handle including brackets and making good the disturbed floor/ surfaces, complete all as specified and directed. |
| 138 | Supply and fix in repair for, vitreous china wash basin, white, flat back, size 550 x 400 mm excluding taps, waste, chain and plug and porcelain stopper but including CI brackets, brass chromium plated waste coupling, PVC waste pipe, cutting for and pinning in ends of brackets or erecting stand, complete all as specified and directed. |
| 139 | Supply and fix in repair for, vitreous china wash basin, counter type, flat back, size 630 x 450 mm excluding taps, waste, chain and plug and porcelain stopper but including CI brackets, brass chromium plated waste coupling, PVC waste pipe, cutting for and pinning in ends of brackets or erecting stand, complete all as specified and directed. |
| 140 | Supply and fix in repair for, health faucet (ABS Body) mild steel chromium plated suitable for 15 mm dia pipe with 1.25 metre long flexible tube and ABS wall hook including making connections and fixed in position complete all as specified and directed. |
| 141 | Supply and fix in repair for, 15mm bore dia brass CP mixer for mixing hot & cold water screwed down for iron pipe complete all as specified and directed. |
| 142 | Supply and fix in repair for, 600mm x 450mm bevelled edge mirror of selected quality 5 mm thick glass, mounted on 6mm thick commercial plywood and fixed to wooden plugs with chromium plated brass screws and cup washers, complete all as specified and directed. |
| 143 | Supply and fix in repair for, PVC connections 15mm size with PTMT nuts of length 450mm, complete all as specified and directed. |
| 144 | Supply and fix for, brass chromium plated over head shower rose with arm 125mm size with long body with swivel joint including fixing to steel pipe or union, complete all as specified and directed. |
| 145 | Supply and fix in repair for, grating doom 100mm dia of PTMT (Minimum weight 25gms), complete all as specified and directed. |
| 146 | Supply and fix in repair for, stainless steel kitchen plate rack made of 1mm thick of size not less tan 25.4 cm depth x 78.6 cm width x 91.4 cm height, including fixing bracket, complete all as specified and directed. |
| 147 | Supply and fix for, 75 mm dia PVC (SWR) pipes single socketed, in any length with rubber ring joints, laid in trenches or in floors, complete all as specified and directed. |
| 148 | Supply and fix for, 75 mm dia PVC (SWR) pipes single socketed, in any length with rubber ring joints, laid in trenches or in floors including taking down old unserviceable PVC pipe, complete all as specified and directed. |
| 149 | Supply and fix for, 110 mm dia PVC (SWR) pipes single socketed, in any length with rubber ring joints, laid in trenches or in floors, complete all as specified and directed. |
| 150 | Supply and fix for, 110 mm dia PVC (SWR) pipes single socketed, in any length with rubber ring joints, laid in trenches or in floors including taking down old unserviceable PVC pipe, complete all as specified and directed. |
| 151 | Supply and fix for, 75mm bore PVC (SWR) bends any radius, complete all as specified and directed. |
| 152 | Supply and fix for, 75mm bore PVC (SWR) branch piece, single (single Y) equal or unequal, complete all as specified and directed. |
| 153 | Supply and fix for, 75mm bore PVC (SWR) junction single, (Single T) equal or unequal, complete all as specified and directed. |
| 154 | Supply and fix for, 110mm bore PVC (SWR) bends any radius, complete all as specified and directed. |
| 155 | Supply and fix in repair for, 110mm bore PVC (SWR) branch piece, single (single Y) equal or unequal, complete all as specified and directed. |
| 156 | Supply and fix for, 110mm bore PVC (SWR) junction single, (Single T) equal or unequal, complete all as specified and directed. |
| 157 | Supply and fix for, 75mm bore PVC (SWR) vent cowl, complete all as specified and directed. |
| 158 | Supply and fix for, PVC (SWR) floor trap 75mm dia, plain with grating including jointing with solvent cement, complete all as specified and directed. |
| 159 | Supply and fix for, PVC (SWR) gully trap 125/110 mm, setting and jointing with solvent cement, complete all as specified and directed. |
| 160 | Supply and fix in repair for, sinks made of stainless steel 1mm thick matt finish kitchen or laboratory with plugs, washers and wastes, including waste coupling and waste pipe, bedding in cement mortar on to dwarf wall or including fixing cantilever brackets and connecting union to pipe, overall size 495mm x 420mm bowl size 410mm x 330mm x 160mm, complete all as specified and directed. |
| 161 | Supply and fix in repair for, sinks made of stainless steel 1mm thick matt finish kitchen or laboratory with plugs, washers and wastes, including waste coupling and waste pipe, bedding in cement mortar on to dwarf wall or including fixing cantilever brackets and connecting union to pipe, overall size 915mm x 460mm bowl size 410mm x 330mm x 160mm, complete all as specified and directed. |
| 162 | Material and labour for construction of brick masonry valve pit chamber of size 90cm x 90cm x 90cm depth (internal dimension) with sub class 'B' brick, old size brick with one brick thick wall in CM (1:4) on 100 mm thick PCC (1:4:8) type D2 (using 40mm graded stone crushed aggregate) as in foundation, 15mm thick rendering cement plaster in CM (1:4) internally and externally up to 150 mm below ground level, provision of valve pit cover made out of 3mm thick MS plate welded with 40 x 5mm thick FI frame all round including provision of hinges, handle, locking arrangement, ISA 40 x 40 x 5mm thick frame, fixed on top of valve pit by means of hold fast 150mm long, embedded in PCC (1:2:4) type B1 (Block size 230 x 200 x 100mm) and applying two coats of synthetic enamel paint over a coat of red oxide zinc chrome primer to all steel surfaces including preparation of surfaces, necessary earth work in soft/ loose soil, complete all as specified and as directed. |
| 163 | Taking down carefully existing copper/aluminium point wiring (light, fan, socket or power) complete with all fittings such as switches, ceiling roses, pendants, regulators, sockets, light fitting etc. removing materials to store for keeping in safe custody or for taking credit (credit for above items should be made as per conditions separately) and making good disturbed surfaces of walls, floors, etc. complete all as directed. |
| 164 | Supply and fix for, point wiring complete with 1100 volts grade, FRLS, 1.5 Sqmm, single core, PVC insulated, unsheathed multistranded copper conductor cable, conforming to IS-694 drawn through and including medium grade PVC conduit of minimum 20mm dia including all accessories concealed in walls/ floors/ ceiling and surface type on existing roofs etc. and pressed GI modular box of 2.0mm thick and suitable size as required at site and suitable for modular brackets for fixing modular switches, fittings, etc. concealed in walls, including provision of 1100 volts, FRLS grade, 1.5 Sqmm, single core, PVC insulated, unsheathed multistranded copper conductor cable as earth continuity conductor with colour coding and connecting to earth dolly for one light point controlled by one modular switch and testing on completion including making good the disturbed surfaces, complete all as specified and directed. Note: Modular cover for flush metal box shall be measured and paid separately under relevant item. |
| 165 | All as per serial item No.164.00 here-in-before but for one light point controlled by two 2 way modular switch. |
| 166 | All as per serial item No.164.00 here-in-before but for one fan point controlled by one 1 way modular switch and modular regulator. |
| 167 | All as per serial item No.164.00 here-in-before but for one 3 pin modular socket outlet, 5 Amps on independent board. |
| 168 | All as per serial item No.164.00 here-in-before but for one 3/5 pin modular switch socket outlet, 5 Amps on same board with other switches. |
| 169 | All as per serial item No.164.00 here-in-before but for one bell point controlled by one modular bell push on independent board. |
| 170 | Supply and fix for, point wiring complete with 1100 volts grade, FRLS, 4.0 Sqmm, single core, PVC insulated, unsheathed multistranded copper conductor cable, conforming to IS-694 drawn through and including heavy duty PVC conduit of minimum 20mm dia including all accessories concealed in walls/ floors/ ceiling and surface type on existing roofs etc. and pressed GI modular box of 2.0mm thick and suitable size as required at site and suitable for modular brackets for fixing switches sockets, fittings, etc. concealed in walls, including provision of 1100 volts, FRLS grade, 4.0 Sqmm, single core, PVC insulated, unsheathed multistranded copper conductor cable as earth continuity conductor with colour coding and connecting to earth dolly for one 3/5 pin 15 Amps socket outlet point controlled by one modular switch of 15/16 Amps on independent board and testing on completion including making good the disturbed surfaces, complete all as specified and directed.Note: Modular cover for flush metal box shall be measured and paid separately under relevant item. |
| 171 | Supply and fix for, modular switch flush type, single pole, one way 6 Amps, 1 module, 230 volts, complete all as specified and directed |
| 172 | Supply and fix for, modular switch flush type, single pole, two way 6 Amps, 1 module, 230 volts, complete all as specified and directed |
| 173 | Supply and fix for, modular switch flush type, single pole, one way 16 Amps, 1 module, 230 volts, complete all as specified and directed |
| 174 | Supply and fix for, modular socket 6 Amps 2/3 pin combined 2 module, complete all as specified and directed |
| 175 | Supply and fix for, modular socket 6/16 Amps 2/3 pin combined 2 module, complete all as specified and directed. |
| 176 | Supply and fix for, ceiling rose surface bakelite three terminals, complete all as specified and directed. |
| 177 | Supply and fix for, bell ding dong AC 230 volts, single pole, complete all as specified and directed. |
| 178 | Material and labour for, pendant, ordinary, comprising ceiling rose, brass with insulated body lamp holder, cord grip pattern, and 0.5 sq.mm copper flexible twisted twin cord up to 1.5m length as ordered, complete all as specified and directed. |
| 179 | Supply and fix for, modular bell push, flush type 6 Amps 1 module, complete all as specified and directed. |
| 180 | Supply and fix for, modular cover inner/ outer plates white colour with frame suitable for flush metal boxes for mounting modular switches or sockets etc. 1 module, complete all as specified and directed. |
| 181 | Supply and fix for, modular cover inner/ outer plates white colour with frame suitable for flush metal boxes for mounting modular switches or sockets etc. 2 module, complete all as specified and directed. |
| 182 | Supply and fix for, modular cover inner/ outer plates white colour with frame suitable for flush metal boxes for mounting modular switches or sockets etc. 3 module, complete all as specified and directed. |
| 183 | Supply and fix for, modular cover inner/ outer plates white colour with frame suitable for flush metal boxes for mounting modular switches or sockets etc. 6 module, complete all as specified and directed. |
| 184 | Supply and fix for, modular cover inner/ outer plates white colour with frame suitable for flush metal boxes for mounting modular switches or sockets etc. 8 module, complete all as specified and directed. |
| 185 | Material and labour for, submain wiring with 1.5 Sqmm nominal area, two single core, PVC insulated unsheathed multistranded FRLS copper conductor cable including one 1.5 Sqmm PVC insulated unsheathed multistranded copper conductor cable for earth wire drawn through and including PVC concealed conduit of minimum 20mm dia medium grade including cutting chases pinning in making good to facing and pointing in using cement mortar (1:3) to the ends, including taking down old unserviceable submain wiring and making good the disturbed surfaces, complete all as specified and directed.Note:- Two runs of main wiring, one run of earth wire and one run of PVC conduit shall be measured as one unit. |
| 186 | Material and labour for, submain wiring with 4.0 Sqmm nominal area, two single core, PVC insulated unsheathed multistranded FRLS copper conductor cable including one 4.0 Sqmm PVC insulated unsheathed multistranded copper conductor cable for earth wire drawn through and including PVC concealed conduit of minimum 20mm dia medium grade including cutting chases pinning in making good to facing and pointing in using cement mortar (1:3) to the ends, including taking down old unserviceable submain wiring and making good the disturbed surfaces, complete all as specified and directed.Note:- Two runs of main wiring, one run of earth wire and one run of PVC conduit shall be measured as one unit. |
| 187 | Material and labour for, submain wiring with 6.0 Sqmm nominal area, two single core, PVC insulated unsheathed multistranded FRLS copper conductor cable including one 6.0 Sqmm PVC insulated unsheathed multistranded copper conductor cable for earth wire drawn through and including PVC concealed conduit of minimum 25mm dia medium grade including cutting chases pinning in making good to facing and pointing in using cement mortar (1:3) to the ends, including taking down old unserviceable submain wiring and making good the disturbed surfaces, complete all as specified and directed.Note:- Two runs of main wiring, one run of earth wire and one run of PVC conduit shall be measured as one unit. |
| 188 | Material and labour for, submain wiring with 10.0 Sqmm nominal area, four single core, PVC insulated unsheathed multistranded FRLS copper conductor cable including one 10.0 Sqmm PVC insulated unsheathed multistranded copper conductor cable for earth wire drawn through and including PVC concealed conduit of minimum 25mm dia medium grade including cutting chases pinning in making good to facing and pointing in using cement mortar (1:3) to the ends with taking down old unserviceable submain wiring and making good the disturbed surfaces, complete all as specified and directed.Note:- Four runs of main wiring, one run of earth wire and one run of PVC conduit shall be measured as one unit. |
| 189 | Supply and fix for, rigid non-metallic PVC conduit 20mm dia with boxes (junction/ terminal) including 2mm dia GI wire inclusive of all tees, bends, elbows, reducers, bell mouth tube ends and fixing accessories such as couplers, lock nuts, saddles, pipe hooks etc. (TV cables) including cutting chases pinning in making good to facing and pointing in using cement mortar (1:3) to the ends with and making good the disturbed surfaces, complete all as specified and directed. |
| 190 | Taking down sheet metal enclosure after disconnecting the electrical connection, dismantling for MCCB DBs, MCB DBs, complete all as directed. |
| 191 | Supply and fix for, factory made double door MCB DB VTPN 4 ways IP-43 including bus bar neutral link earth bar and din rail suitable for mounting MCBs, MCCB where MCCB used as incommer and MCB is used as outgoing recessed with wall surface, complete all as specified and directed. |
| 192 | Supply and fix for, sheet metal enclosure for MCB DBs, phosphatised, powder coated, Triple Pole and Neutral suitable for 4 way, double door 415 volts, complete all as specified and directed. |
| 193 | Supply and fix for, sheet metal enclosure for MCB DBs, phosphatised, powder coated, Single Pole and Neutral suitable for 4 way with dim rail earth and neutral bar, double door 240 volts, complete all as specified and directed. |
| 194 | Supply and fix for, sheet metal enclosure for MCB DBs, phosphatised, powder coated, Single Pole and Neutral suitable for 8 way with dim rail earth and neutral bar, double door 240 volts, complete all as specified and directed. |
| 195 | Supply and fix for, MCCB 100 Amps, 4 pole of rapturing capacity 16 KA, complete all as specified and directed. |
| 196 | Supply and fix for, MCB 4 pole, 63 Amps, 415 volts, 'C' curve 10 KA breaking capacity, complete all as specified and directed. |
| 197 | Supply and fix for, MCB single pole, 6 to 32 Amps, 240 volts, 'C' curve 10 KA breaking capacity, complete all as specified and directed. |
| 198 | Supply and fix for, MCB SPN, capacity up to 32 Amps, 240 volts, 'C' curve 10 KA breaking capacity, complete all as specified and directed. |
| 199 | Supply and fix for, MCB SPN, capacity 40 Amps, 240 volts, 'C' curve 10 KA breaking capacity, complete all as specified and directed. |
| 200 | Supply and fix for, sheet metal enclosure, single pole and neutral enclosure of 20 Amps, 240 volts with a two pin and earth plug and socket complete with one single pole 20 Amps MCB including taking down old unserviceable MCB, complete all as specified and directed. |
| 201 | Fixing only LED batten light 10/20 watts light fitting (Material obtained from taking down item here-in-before), complete all as directed. |
| 202 | Supply and fix for, indoor luminaire decorative batten for wall/ ceiling mounting box type extruded aluminium housing, PC diffuser, energy efficient saving LED batten light 10 watts, 230 volts, 50 Hz, slim integrated design easy install including twin twisted copper conductor flexible wire from ceiling rose to connector, complete all as specified and directed. |
| 203 | Supply and fix for, indoor luminaire decorative batten for wall/ ceiling mounting box type extruded aluminium housing, PC diffuser, energy efficient saving LED batten light 20 watts, 230 volts, 50 Hz, slim integrated design easy install including twin twisted copper conductor flexible wire from ceiling rose to connector, complete all as specified and directed. |
| 204 | Supply and fix for, LED mirror light fitting 5 watt 230 Volts, 50 Hz suitable for indoor applications, complete all as specified and directed. |
| 205 | Supply and fix for, LED bulk head fitting 10 watt 230 Volts, 50 Hz suitable for indoor and out door applications, complete all as specified and directed. |
| 206 | Supply and fix for, post top lamp new generation 25 watts LED, IP 65 energy saving, environmental friendly, long life aesthetically designed with symmetrical light distribution, spun aluminium landscape luminaries with high power LEDs at light source, clear cover offers bright illumination, complete all as specified and directed. |
| 207 | Supply and fix for, on wall security LED light luminaire fitting 1X35 watts including 1.5 Sqmm PVC insulated stranded copper conductor (FRLS) cable for connection from ceiling rose including 25mm dia GI medium grade bracket 1.5m long bent to shape fixed with and including bolts, nuts, washers, clamps etc., complete all as specified and directed. |
| 208 | Supply and fix electric water heater/Geyser, storage type rust proof PP (Thermoplastic) outer body with stainless steel inner tank and heating element upto 2 KW capacity 25 litre, BEE 5 Star rated complete with all accessories such as safety valve, thermostate, NRV, connection piece etc. including PVC connection pipe for hot/cold water to existing water lines necessary fixing arrangement by using 50x5mm MS plate and writing MES No. and paste the instruction sheet of DO's and DO NOT, including taking down old geyser carefully of any size/ capacity for re-install in position the serviceable one or depositing to MES store yard, complete all as specified and directed. |
| 209 | Taking down carefully old unserviceable ceiling fan, metal exhaust fan/ PVC exhaust fan of any size/ sweep and depositing to MES store yard for BER, complete all as directed. |
| 210 | Supply, testing & hanging of energy saving non-decorative ceiling fans complete with blades, down rod of desired length, modular electronic regulator 2-module and accessories including connecting up with three core flexible copper cable of suitable size, 230 V, 1200 mm sweep. Min air delivery 210 CFM with service value 6.00 BEE. Five star rated with brushless direct current motor (BLDC) including writting MES NO. (as per standerd practice) complete all as specified and as directed. |
| 211 | Supply and fix for, exhaust fan, steel body AC single phase, 230 volts of size 300m sweep with, blades, and frame and louvers, connection including cutting of hole on wall of suitable size and taking down old unserviceable fan kept deposit in MES store yard, complete all as specified and directed. |
| 212 | Supply and fix for, exhaust fan, PVC body of size 250 mm sweep, single phase, 230 volts AC and connection including cutting of hole on wall of suitable size and taking down old unserviceable fan kept deposit in MES store yard, complete all as specified and directed. |
| 213 | Supply, Fixing and Installation of wall mounted Electric Kitchen Chimney of size 90cm, metal body, compact design suction 1400 + 50 m3/hr, Filter less and dry heat clean technology.matt black finish, hassle free and dry heat auto clean technology, thermostatic touch control panel with three speed gesture motion, black metal oil collector, motor with copper winding, black glass clad hood with LED insignia, front panel with black glass, energy saving MED light, metal blower plus metal housing, Noise level- 58 dBA (maximum), 5 years warranty complete with fixing system for smooth running of chimney complete all as specified and as directed. Please Enable Macros to View BoQ information |
| 214 | Supply, Fixing and Installation of wall mounted Electric Kitchen Chimney of size 90cm, metal body, compact design suction 1400 + 50 m3/hr, Filter less and dry heat clean technology.matt black finish, hassle free and dry heat auto clean technology, thermostatic touch control panel with three speed gesture motion, black metal oil collector, motor with copper winding, black glass clad hood with LED insignia, front panel with black glass, energy saving MED light, metal blower plus metal housing, Noise level- 58 dBA (maximum), 5 years warranty complete with fixing system for smooth running of chimney complete all as specified and as directed. Please Enable Macros to View BoQ information |
| SR No | FileName | File Description |
| 1 | Click here to download tender document | Tender Documents |
| 2 | Click here to download tender document | Tender Documents |
| 3 | Click here to download tender document | Tender Documents |
| 4 | Click here to download tender document | Tender Documents |
| 5 | Click here to download tender document | Tender Documents |
| 6 | Click here to download tender document | Tender Documents |
We are a group of professionals specializing in custom software development, web development, mobile app development, IOT base solutions, web design, graphics & Enterprise solutions provid.
Copyright © 2026 · All Rights Reserved. Terms of Usage | Privacy Policy
For Tender Information Services Visit : TenderDetail
