|
| 1 | Dismantling tile work in floors and roofs laid in cement mortar including stacking material within 50 metres lead. For thickness of tiles above 25 mm and up to 40 mm. |
| 2 | Demolishing brick work manually/ by mechanical means including stacking of serviceable material and disposal of unserviceable material within 50 metres lead as per direction of Engineer-in-charge. |
| 3 | Dismantling doors, windows and clerestory windows (steel or wood) shutter including chowkhats, architrave, holdfasts etc. complete and stacking within 50 metres lead : Of area 3 sq. metres and below. |
| 4 | Excavation in foundation in ordinary soil (Loam,clay or sand) including lift upto 30M. And including filling watering and raming of excavated earth into the trenches or into the space between the building and the sides of foundation trenches or into the plinth and removal and disposal of surplus earth as directed by the Engineer-in charge up to a distance of 30M. from the foundation trenches (2.1) |
| 5 | Providing And Laying 1:5:10 (1 cement : 5 coarse sand (zone-III) derived from natural sources : 10 graded stone aggregate 40 mm nominal size derived from natural sources). |
| 6 | Brick work with common burnt clay F.P.S. (non modular) bricks of class designation 7.5 in superstructure above plinth level up to floor V level in all shapes and size in: Cement mortar 1:4 (1 cement : 4 coarse sand). |
| 7 | R.C.C. work with cement approved coarse sand and 20 mm. guage approved stone grit im the proportion of 1:1.5:3 (M-20) in lintels of doors and windows excluding supply of reinforcement and its fixing and binding the same with 24 BWG binding wire and including necessary centering and shuttering etc.and also including supply of all materials, labour and tools and plants etc, required for proper completion of the works. strength of the concrete shall not beless than M 200. |
| 8 | TMT Fe 500 Mild steel or iron in plain work such as reinforced concrete or reinforced, brick work (when not included in over all rates ) wrought to required shape as necessary including bending for proper completion of the work and including supply of steel its wastage bend hooks and authorised over lapping shall be measured upto floor two level. |
| 9 | Providing and applying white cement based putty of average thickness 1 mm, of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete. |
| 10 | Distempering with oil bound washable distemper of approved brand and manufacture to give an even shade : New work (two or more coats) over and including waterthinnable priming coat with cement primer. |
| 11 | Repairs to plaster of thickness 12 mm to 20 mm in patches of area 2.5 sq.meters and under, including cutting the patch in proper shape, raking out joints and preparing and plastering the surface of the walls complete, including disposal of rubbish to the dumping ground, all complete as per direction of Engineer in-Charge. |
| 12 | Providing and laying vitrified floor tiles in different sizes (thickness to be specified by the manufacturer) with water absorption less than 0.08% and conforming to IS: 15622, of approved make, in all colours and shades, laid on 20mm thick cement mortar 1:4 (1 cement : 4 coarse sand), jointing with grey cement slurry @ 3.3 kg/ sqm including grouting the joints with white cement and matching pigments etc complete. |
| 13 | Creamic Wall Tiles |
| 14 | Providing wood work in frames of doors, windows, clerestory windows and other frames, wrought framed and fixed in position with hold fast lugs or with dash fasteners of required dia & length (hold fast lugs or dash fastener shall be paid for separately) (DSR - 9.1.). Sal wood (DSR - 9.1.2.) |
| 15 | P/F Teak wood panel work for door,window,ventilators and partion etc as per architectural drawings and tha directions of engineer in charge. (a) Teak wood Door & window panel Size |
| 16 | Providing and fixing wooden moulded beading to door and window frames with iron screws, plugs and priming coat on unexposed surface etc. complete (DSR - 9.40), 50 x 20 mm (DSR - 9.40.1.2). |
| 17 | Providing and fixing fly proof stainless steel grade 304 wire gauge, to windowsand clerestory windows using wire gauge with average width of aperture 1.4 mm in both directions with wire of dia. 0.50 mm all complete. (DSR - 9.135), With 2nd class teak wood beading 62X19 mm (DSR - 9.135.1). |
| 18 | Providing and fixing panelling or panelling and glazing in panelled or panelled and glazed shutters for doors, windows and clerestory windows (Area of opening for panel inserts excluding portion inside grooves or rebates to be measured). Panelling for panelled or panelled and glazed shutters 25 mm to 40 mm thick (DSR - 9.7), Float glass panes (DSR - 9.7.7), 5.0 mm thick glass panes (weight not less than 12.50 kg/sqm) (DSR - 9.7.7.2). |
| 19 | Finishing with Deluxe Multi surface paint system for interiors and exteriors usingPrimer as per manufacturers specifications (DSR - 13.48), Painting wood work with Deluxe Multi Surface Paint of required shade. Two ormore coat applied @ 0.90 ltr/10 sqm over an under coat of primer applied @0.75 ltr/10 sqm of approved brand and manufacture (DSR - 13.48.2). |
| 20 | S/OF FITTING OF DOOR & WINDOW ASCESSORIES |
| 21 | Sitkani 8\\" |
| 22 | Sitkani 6\\" |
| 23 | Belan 12\\" |
| 24 | Handle 6\\" |
| 25 | Handle 5\\" |
| 26 | Kabja 6\\" |
| 27 | Kabja 4\\" |
| 28 | Gate Hook 6\\" |
| 29 | Screw 1.5\\" |
| 30 | 1.25\\" |
| 31 | Door Closer Please Enable Macros to View BoQ information |
