|
| 1 | Taking down cement plaster on Brick / Concrete/stone surfaces incl raking out joints, hacking for key scrubbing down with water and Removing Rubbish of the MD Land complete all as specified and directed by Engineer-in-Charge. |
| 2 | M&L for rendering 20mm thick on stone masonary surfaces or surface other than fair face of brickwork or on one side of lathing in CM 1:4 with 3% of WPC,Surfaces even & smooth without using extra cement on external surfaces of wall incl chajja complete all as specified and as directed. (Note : WPC to be measured and paid separately under relevant item) |
| 3 | M&L for rendering 15mm thick on stone /brick masonary walls in CM (1:6) finished even & smooth without using extra cement on internal surfaces complete all as specified and as directed. |
| 4 | M&L for brushing neat cement slurry with 3.0kg of cement per sq. metre, including cleaning of rusted steel particles in reinforcement complete all as specified and directed. |
| 5 | M&L for rendering 10mm thick on fair face of brick work or concrete surfaces of ceiling in CM (1:3) finished even & smooth without using extra cement complete all as specified and directed. |
| 6 | Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing), removing serviceable tiles to store and rubbish off the premises complete all as specified and directed. |
| 7 | Demolition of unreinforced cement concrete in floors and pavings n exc 15 cm thickness (below or above ground level) complete all as specified and directed. |
| 8 | Demolition of stone slabs of any description or thickness in floors laid bedded and pointed in any mortar etc. complete removal of debris outside MD land complete all as specified and as directed. |
| 9 | M&L for 75 mm thick cement concrete 1:3:6, type C-2 using 40 mm size graded stone aggregate as in sub base flooring complete all as specified and as directed. |
| 10 | M&L for 25 mm thick cement concrete 1:2:4, type B-0 using 12.5 mm size graded stone aggregate as in sub base to receive floor finishes complete all as specified and directed. |
| 11 | M&L for Non - skid coloured ceramic tiles of 7 to 8 mm thick (square/ rectangular) area of each tile exceeding 0.18 sqm but not exceeding 0.36 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match over 15 mm thick screed bed in cement mortar 1:6 complete all as specified and as directed. |
| 12 | M&L for non skid ceramic coloured tiles 7 to 8 mm thick (square/rectangular) area of each tile exceeding 0.18 sqm but not exceeding 0.36 sqm, in skirting/dado etc. set and jointed in neat cement slurry and pointed in white cement or coloured cement to match over 10 mm thick rendering in cement mortar 1:4 complete all as specified and as directed. |
| 13 | M&L for Non - skid coloured ceramic tiles of 7 to 8 mm thick (square/ rectangular) area of each tile exceeding 0.11 sqm but not exceeding 0.18 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match over 15 mm thick screed bed in cement mortar 1:6 complete all as specified and as directed. |
| 14 | M&L for Glazed coloured ceramic tiles in vertical surface 350x 250x 7 / 450x350x7 mm thick set and jointed in neat cement slurry and pointed in white or colour cement to match over 10 mm thick backing coat in Cm 1:4 complete all as specified and as directed. |
| 15 | M&L for 20mm thick Granite work (table rubbed and polished) in steps, jambs, pillars, window- cills, cooking platforms and like in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite including 15 mm thick screed bed in CM 1:6 and Rounding to edges complete complete all as specified and as directed. |
| 16 | M&L for 18-20mm thick Sadherhali stone slab flooring, steps, jambs, pillars, window- cills, steps/stairs, cooking platform and like in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite including 15 mm thick screed bed in CM 1:4 and Rounding to edges complete. |
| 17 | M&L for 18-20mm thick Sadherhali stone slab for skirting, riser, dado and like jointing in cm (1:3) cluding pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granit including 10 mm thick rendering in CM 1:3 all as complete complete. |
| 18 | M&L for Treating anti termite treatment to the soil along with external perimeter of building at the rate of 2.25 litre of emulsion per metre of the perimeter wall complete all as specified and as directed. |
| 19 | M&L for PCC 1:3:6 type C2 75 mm thick (using 40mm graded aggregate) as in Plinth protection laid in alternate bays and filling the joint, finshed the concrete surface even and smooth without using extra cement complete all as specified and as directed. |
| 20 | Demolition of Brickwork or PCC solid block or stone/ boulder masonry, built in cement mortar including all quoins, arches, pillars, etc, but excluding ashlar facings, dressed stonework and precast concrete articles complete all as specified and directed. |
| 21 | M&L for precast cement concrete block Type C1, 1:3:6 (20 mm graded aggregate) masonry with solid block, exc 10 cm in width and setting in cement mortar 1:6 complete all as specified and directed. |
| 22 | M&L for Precast cement concrete type C1, 1:3:6 (20mm graded aggregate) solid building blocks 10cm thick setting in CM 1:6 complete all as specified and as directed. |
| 23 | Taking down Chowkhats or frames not exc. 1.5 sq. m each but with shutters (without taking off shutters from the frames) complete all as specified and directed. |
| 24 | All as per serial item No 23 above but exc 1.5 sqm and n exc 4.00 sqm complete all as specified and directed. |
| 25 | S&F Pressed steel frames for door 125x60 mm with one or more rebates including necessary fixing lugs, hinges, lock strike plate, etc., complete all as specified and directed. |
| 26 | S&F Pressed steel frames for door 105x60 mm one or more rebates including necessary fixing lugs, hinges, lock strike plate, etc., complete all as specified and directed. |
| 27 | M&L for PCC 1:2:4 type B0 using 12.50mm graded aggregate as in filling of chowkats, stell frame and similar works complete all as specified and directed. |
| 28 | S&F 30 mm thick Flush shutters, solid core construction, with block board core and plywood face panels, commercial type on both sides complete all as specified and as directed. |
| 29 | S&F 30 mm thick Second class hard wood Glazed and skeleton shutters, for windows and doors open rebated and prepared to receive glass, gauze, etc., divided in to squares with plain, chamfered or rounded mitred and rebated sash bars any numbers, edges of framing plain, chamfered or rounded, fitted with cut mitred beads for securing glass etcsizes of members of shutters as specified in SSR in SSR Part I, section 8, clause 8.24(b); supply and fixed to chowkats complete all as specified and directed. |
| 30 | S&F Powder coated aluminium side hung window with frame & shutter with glazed shutter and wiremesh shall be fixed in separate aluminium frame section with the following details :-(i) Aluminium frame section 68.3x38.3x1.60mm, Aluminium mullion 65x42x1.5mm(ii) Aluminium main shutter glazed/skeleton section 95x42x1.6mm with matching shutter70x42x1.50mm thick.(iii) Aluminium grill size 50mmx50mm and 4 to 5mm thick bars complete all as specified.(iv) Fixing arrangements legs in hold fast in walls incl PCC (1:3:6) making good distributed surfaces complete in originally shape.(v) 4mm thick glass orinary quality and fixed with rubber gasket for with glazed shutter etc.(vi) Stainless steel wire mesh 0.36mm nominal dia avg aperature 1.14mm fixed in aluminium frame outer section 25x50x1.2mm and mesh shutter section of size 30x60x1.2mm with rubber gasket/EPDM gasket complete(vii) Aluminium handle, hinges and locking system complete |
| 31 | S&F Powder coated aluminium Ventilator (partially fixed glazing and Partially louvered glazing) with the following details :-(i) Aluminium frame section 45x25x1.80mm.(ii) Fixing arrangements legs in hold fast in walls incl PCC (1:3:6) making goog distributed surfaces complete in originally shape.(iii) 4mm thick frosted glass orinary quality (partially fixed glazing and Partially louvered glazing) and fixed with rubber gasket for with glazed shutter etc. |
| 32 | S&F 50mm x 47 mm size PVC solid door frame of size made out of 5mm plain Colour PVC sheet reinforced with MS square tube , supplying and fixing in opening as per specification and drawing shown in SSR 2004 Part II. complete all as specified and directed. |
| 33 | S&F 30mm thick factory made solid panel PVC door shutter (style) consisting of frame made out of MS tubes for top and bottom rails, MS frame shall be covered with heat moulded plain Colour PVC 'C' channel having a PVC sheet strip of 20 mm width stuck in side with solvent cement for stiles and plain Colour PVC sheets for top rail, lock rail and bottom rail on either side & as gap insert for top rail and bottom rail, panelling of plain Colour PVC sheet to be fitted in the MS frame welded /sealed to the stiles and rails with suitable PVC sheet beading and joined together with solvent cement supplying and fixing in the frame at site as per specification and drawing shown in SSR 2004 Part II. complete all as specified and directed. |
| 34 | M&L for Chequered cement concrete tiles 30cm x 30cm x 25mm thick, with grey cement and pigments set, jointed and pointed in neat cement slurry in floors including 20 mm thick screed bed of CM 1:6 complete all as specified and directed |
| 35 | M&L for hard core of guage not exc 63mm, deposited, spread and levelled in layers in exc 15cm thick using broken stone or boulders, watered and rammed to a true surface complete all as specified and directed. |
| 36 | M&L for 18 mm thick PVC ply both sides plain as in kitchen cupboard/cupboards partitions etc including solvent cement including suitable frame for fixing of shutters including dismantling of old one where ever required complete all as specified and directed |
| 37 | S&F Continuous (piano) hinges, mild steel bright finish or electrogalvanised complete all as specified and directed. |
| 38 | Cutting holes in stone/brick walls built in cement mortar for inserting hold fasts and making good dismantled portion in cement mortar 1:3 or cement concrete 1;2:4 type B1 exceeding half brick but not exceeding one brick all as specified and as directed. |
| 39 | S&F Mild steel work as in band, strap, hold fast, cleat, hook, hinges, base tie for door frame, support or stay for rain water pipe, guard bars etc and other similar items conforming to Fe-410-0 or Fe-310-0 complete all as specified and as directed. |
| 40 | S & F Stainless steel wire cloth. 0.36mm nominal dia of wire and average width of aperture 1.40mm and fixed with stainless steel wire staples complete all as specified and directed. |
| 41 | S & F Butt hinges,100 mm size medium weight, stainless steel complete all as specified and directed. |
| 42 | S&F 150 mm Aluminium anodised barrel tower bolts of extruded section and fixed complete all as specified and directed. |
| 43 | S&F 150mm extruded aluminium alloy handles, fabricated type, anodised complete all as specified and directed. |
| 44 | S & F 75 mm size Butt hinges extruded aluminium alloy with galvanised mild steel hinge pin anodised and fixed, type C-21 complete all as specified and directed. |
| 45 | S&F 100 mm Aluminium anodised barrel tower bolts of extruded section and fixed complete all as specified and directed. |
| 46 | S&F 100mm extruded aluminium alloy handles, fabricated type, anodised complete all as specified and directed. |
| 47 | S&F 300mm Aluminium alloy, anodised, sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded section and fixing bolts and sliding bolts of extruded sections or cast-aluminium alloy and fixed all as specified and directed. |
| 48 | S&F 100mm Hasp and staple, safety type, aluminium anodised with hinge pin including bolt to hinge plate and fixed with screws complete all as specified and directed. |
| 49 | S&F 15mm dia Magic Eye complete all as specified and directed. |
| 50 | S&F 300mm MS ordinary rat tail rod pattern spring including roller and roller plate complete all as specified. |
| 51 | S&F Floor door stopper 140mm of aluminium alloy body and tongue, anodised with hard drawn steel spring fixed in floor |
| 52 | S&F in Repair 25mm dia aluminium anodised Powder coated Curtain Rod of approved quality complete all as specified and directed. |
| 53 | S&F in repair decorative type curtain rod brackets suitable for 25mm dia curtain rod complete all as specified and directed. |
| 54 | S & F in repairs Rotational moulded polyethene water storage tanks 1000 lit capacity (cylindrical vertical with closed top) hoisted and fixed in position all as specified in SSR part-I including 25mm Ball Valves high pressure, 25mm Union and tank nipple, 25mm gate valves, including dismantling of existing water tank complete all as directed by Engr-in- Charge. |
| 55 | Taking up or down steel water tubing and connections 20 mm bore complete all as specified and as directed. |
| 56 | Taking up or down steel water tubing and connections 15 mm bore complete all as specified and as directed. |
| 57 | S&F 20mm outer dia CPVC Pipe (ISI Marked) SDR II & plain CPVC SDR II fittings fixed on wall, celing or floors including cutting and chasing in existing wall complete all as specified and as directed. |
| 58 | S&F 25mm outer dia CPVC Pipe (ISI Marked) SDR II & plain CPVC SDR II fittings fixed on wall, celing or floors complete all as specified and as directed. |
| 59 | S&F in repairs Stainless Steel ( conforming to AISI -304 grade) Kitchen Sink with drainage board of overall size 915mm x 460mm and bowl size 410mm x 355mm x 165mm depth made of 1mm thick stainless steel sheet with CP waste coupling including ball and chain 300mm long with brass cap rubber plug, 32mm bore PVC waste pipe (heavy duty ) 90 cm long, and bedded in cement morter and fixed on CP cantilever brackets, complete as directed. (Make -Nirali, Elegance(regular) Range or equivalent of sink complete all as specified and as directed. |
| 60 | S&F in Repair Bib Tap Sink Cock with flange 15 mm bore all as directed by the Engineer -in -charge. |
| 61 | S&F in repairs vitreous china wash hand basin, white, flat back of size 550x400 mm including a pair of cast iron cantilever brackets of size 40 x 40 x 5 mm with and including 32 mm dia PVC waste coupling of PTMT (half or full threaded), waste pipe low density polyethylene pipe 32mm bore complete all as specified and directed. |
| 62 | S&F in repairs vitreous china wash down water closet pan (pedestal pattern) (EWC) white with 'P' or 'S' trap, plastic seat cover, white closed pattern with flat bottom and cover and mild steel chromium plated or aluminised hinging device including connection to outgoing pipe and to flushing pipe, anti-syphonage pipe etc (excluding flushing cistern and flush pipe) including making good to the floor complete all as specified and as direced. |
| 63 | S & F in repair white PVC flushing cistern 10 litres capacity, low level valveless, symphonic action type with inlet, ball valve, float and handle (including brackets, flush pipe of PVC 32 mm dia and handle) including cutting and pinning in ends, making good to disturbed surfaces in cement mortar 1:3 and fixed inclusing taking down/out unserviceable flushing cistern and connected items complete all as specified and directed. |
| 64 | S&F in repairs PVC Connection 15mm dia with PTMT nuts of length 450mm complete all as specified and as directed. |
| 65 | S&F 15mm bore pillar taps cast copper alloy, with capstan heads chromium plated, screwed down, fancy type high pressure, with or without lettered 'HOT or COLD' with long screwed sunk and fly niuts complete all as specified and directed |
| 66 | S&F in repairs 15mm Bib tap chromium plated fancy type cast copper alloy with crutch or butterfly handle screwed down, screwed for iron pipe or for union complete all as specified and directed. |
| 67 | S&F in repairs 2 way CP 15mm Bib tap Quarter turn fancy type with crutch or butterfly handle screwed down, screwed for iron pipe or for union complete all as specified and directed. |
| 68 | S&F in Repair 15mm Bore Stop Valves / Angle Cock Fancy Type Chromium plated cast copper alloy screwed down high pressure with crutch or butterfly handles screwed both ends complete all as specified and as directed. |
| 69 | S&F in repairs Shower rose with brass chromium plated shower rose with or without swivel joints, 125mm size including fixing to steel pipe or union complete all as specified and directed. |
| 70 | S&F in repairs Brass chromium plated tubular towel rail, 20mm dia ‘D’ type, 60CM long between flanges complete all as specified and as directed. |
| 71 | S&F in repairs CP health faucet along with 1 m long flexible tube and holding stand including all necessary fittings complete all as specified and as directed |
| 72 | S&F in repairs CP Soap dish 150mm, fixed to wall with chromium plated brass screws complete all as specified and as directed. |
| 73 | S & F 600mm x 450mm bevelled edge mirror of selected quality glass, mounted on 6 mm thick AC building board or commercial plywood and fixed to wooden plugs with chromium plated brass screws and cup washers complete all as specified and directed. |
| 74 | M&L for applying two coats of oil bound distemper over a coat of alkali resistant primer including on newly plastered surfaces of ceiling including a coat of Birla Wall care putty 1mm thick wall putty necessary prepartation complete all as specified and as directed. |
| 75 | M&L for Preparation of newly plastered surface of ceiling of any description over 10 cm girth or width, not otherwise described and applying three coat of white wash complete all as specified and directed. |
| 76 | M&L for applying two coats of oil bound distemper over a coat of alkali resistant primer including on newly plastered surfaces of wall including a coat of Birla Wall care putty 1mm thick wall putty necessary prepartation complete all as specified and as directed. |
| 77 | M&L for applying two or more coats of 100% Premium acrylic emulsion paint having VOC less than 50 gm / litre and UV resistance as per IS 15489:2004, Alkali and fungal resistance, dirt resistance exterior paint (weather proof paint) of required shade (company depot tinted) with silicon additives @ 1.43 litre / 10 sqm over and including priming coat of exterior primer applied @ 0.90 litre / 10 sqm over new plastered surfaces of wall complete all as specified and as directed. |
| 78 | M&L Preparation of Old decorated surface and applying two coats of white wash on ceiling etc complete and as directed. |
| 79 | M&L Preparation of New Wood surface and applying two coats of synthetic enamel paint over a coat of pink primer over 10cm width or girth complete all as specified and as directed. |
| 80 | M&L in repairs PVC (SWR) floor trap 75mm dia plain with steel grating including jointing with solvent cement etc complete complete all as specified and as directed. |
| 81 | S&F in repair 110mm dia PVC (SWR) pipes single socketed in any length with rubber ring joints fixed to walls etc complete all as specified and as directed. |
| 82 | S&F in repair 75mm dia PVC (SWR) pipes single socketed in any length with rubber joints fixed to walls etc complete all as specified and as directed. |
| 83 | S&F PVC (SWR) bends 110mm dia any radius with access door complete all as specified and as directed. |
| 84 | S&F PVC (SWR) bends 75 mm dia any radius with access door complete all as specified and as directed. |
| 85 | S&F PVC (SWR) junction single, (Single T) 110mm dia equal or unequal with access door complete all as specified and as directed. |
| 86 | S&F PVC (SWR) junction single, (Single T) 75mm dia equal or unequal with access door complete all as specified and as directed. |
| 87 | S&F PVC (SWR) vent cowl 110mm bore complete all as specified and as directed. |
| 88 | S&F PVC (SWR) vent cowl 75mm bore complete all as specified and as directed. |
| 89 | S&F in repairs Chromium Plated Steel Grating of 100mm size With or Without Waste Hole complete all as specified and as directed. |
| 90 | Demolition of unreinforced cement concrete in roofs, floors (other than ground floors), beams, staircases, landing, chajjas and similar suspended work complete , including APP membrane and plastering/ rendering all as specified and directed. |
| 91 | M&L for PCC 1:2:4 type B-0 using 12.5mm grades stone aggregate as in Padding over roof / chajja finished even and smooth without using extra cement complete all as specified and as directed. |
| 92 | M&L Rendering 10mm thick on brick work or concrete surface in CM 1:3 using water proofing compound as per manufacturer's instructions, surface finished even and smooth surface without using extra cement complete all as specified and directed.Note : WPC shall be measured and paid seperately. |
| 93 | M&L for Applying oil bound bitumen primer @ 1.50 Kg/Sqm and providing 3 mm thick APP modified water proofing membrane weighing 3.6 kg/sqm reinforced with non woven polyester matt weighing not less than 150 gm /sqm having softening point not less than 140 centigrade, having tensile strength of 650N/sqm and 350 N/sqm in longitudinal and transverse directions respectively of the reinforced tearing strength of 180N by torch application with minimum 10cm side overlap and 15cm end lap, applying a coat of blown grade hot bitumen 85/25 over the membrane @ 1.2 Kg /Sqm top of membrane surface shall then be finished with solar reflective bituminious aluminium paint @ 0.10 Kg/Sqm complete all as directed including taking down existing treatment complete all as specified and directed |
| 94 | Supply only Integral waterproofing compound complete all as specified and directed. |
| 95 | S & F Sheet glass shelf assembly consisting of 5.5mm thick sheet glass shelf 12 cm wide with chromium plated bracket guard and railing 60 cm long complete all as specified and directed. |
| 96 | S&F magnetic catcher with 8mm dia steel ball and brass body and strike plate including letting in and fixed complete all as specified and directed. |
| 97 | S & F 5 feet long pulley operated clothes drying system kit of 4 pipes consisting of aluminium pipes each of outer dia 22mm and inner dia 19.8mm, pulleys made up of derlin with rope guide mounted on channel pair of length 24\\" (distance between two pipes is adjustable). Locking system to hide rope knot. Channel to be mounted or fixed with self tapping screws provided in kit. Rope will HDPE double core of 4mm dia complete all as specified and as directed. |
| 98 | S&F in repairs Stainless steel plate rack of size 900mm x 900mm x 250mm including fixed with rawl plug and screws on walls complete all as specified and directed. |
| 99 | S&F 15mm bore brass CP wall mixer for mixing hot and cold water screwed down with provision of over lead shower and cock for iron pipe and fixed complete all as specified and directed. |
| 100 | M&L for Cutting/chipping the sapling from stone / concrete surfaces of columns, beams, facias, slabs, Chajjas & cartilevers etc., and trimming cleaning the surfaces of any thickness all as specified and directed. M/L for applying epoxy treatment for bonding old demolished concrete surfaces incl application of one coat of notozinc primer to the exposed reinforcement and over plastering in CM 1:4 average 20mm thick finishied even and smooth without using extra cement to level the surface etc incl necessary scafolding as required at site and where required complete all as specified and directed |
| 101 | Demolition of cement concrete ( reinforced) other than ground floors, beams stair cases, landings, chajjas and similar suspended work (reinforcement cut as required to facilitate demolition) complete all as specified and directed. |
| 102 | M&L for Form work to rough finished surface of sides and soffits of suspended slabs such as roof slabs, floor slabs, landings, chajjas and similar work; not exceeding 200mm thick (Horizontal or sloping) complete all as specified and directed |
| 103 | M&L for Formwork (rough finished) to edges of concrete flats, treads, breaks in floors, window cills, concrete railings, openings in concrete walls, floor and roofs n exc 20 cm wide and sides of RCC/ PCC bands in walls, horizontal or sloping and similar work exc 10cm but n exc 20cm wide complete all as specified and as directed. |
| 104 | M&L for Reinforced cement concrete Type B-1, 1:2:4 (using 20 mm graded stone aggregate) as in slabs supported on walls, chajjas, beams, landings, deck slab and like complete all as specified and directed. |
| 105 | S&F mild steel TMT bars 10 mm dia and over cut to length bent to shape required including cranking bending spirally for hooping for (Columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.90 mm dia or securing with clips complete all as specified and directed. |
| 106 | Drilling holes for inserting TMT bars, bolts, pipes etc not exceeding 25 mm dia in concrete wall / stone wall and applying bonding agent of NITOBOND chemical (FOSROC) as per manufacturers instructions to the receiving inserting rod for through bonding before concreting complete all as specified and directed. Note : Measurements to be taken on the affected area |
| 107 | S&F towel ring of PTMT fixed with and including chromium plated brass screws and wooden /plastic cleats (minimum weight 90 gms) complete all as specified and directed. |
| 108 | Treatment of sunken floor slab compriases of the following specifications and all as specified :-(i) Material and labour for cleaning of the sunken /lowered portion of the RCC slab surface (including vertical total depth plus skirting height) of floors by wire brush, chiesel out any mortar sticking to the surface and brooming / washing completely. 40 mm avg thick PCC 1:2:4 type B-0 using 12.5 mm graded aggregate as in padding concrete to achieve proper slope including 50 mm dia 350 mm long medium grade GI pipe spouts with wire guage on inside mouth to be fixed.(ii) Rendering of uneven surfaces with 10 mm thick CM 1:4 mixed with integral water proofing compound of UltraTech WP+ 200 or other equivalent etc complete fill it with water and check dampness and seepage. where dampness and seepage noticed nozzles shall be fixed and grouting carried out. (iii) All junctions points of side walls where CI/GI pipes are passing through shall be sealed with epoxy putty (iv) After drying putty wash the slab and sides of sunken portion with water and make it clean and clear(v) Material and labour for applying two coat of polymer modified cementious water proofing coating as per manufactures instructions to bottom and vertical sides up to finished flooor level +100 mm height. The thickness of two layer shall be 1 mm. When the second layer is still sticky, coarse sand spry shall be carried out or vertical and bottom surface of the sunken portion all as specified and directed.(vi) Plaster the bottom and sides up to bottom of the skirting with minimum 20mm thick CM 1:4 mixed with integral water proofing compound @3% wt of cment consumed as per manufacturer's specification including rounding of corners and junctions sloping towards spout. (WPC shall be measured & paid separately ) Note :- Test the water proofed area (ponding test) by filling water for at least 72 hours and tested for leakage seepage and to the entire satisfaction of GE. The treatment shall be carried out by authorised applicators of chemicals. Cost of testing is included in the rates quoted above.(vii) All pipes laid in sunken portion shall be covered with 50 mm thick PCC 1:2:4 all around after painting with anticorrossive black japan paint |
| 109 | M&L for Cement concrete Type E2 1:5:10 (40 mm graded aggregate) in foundation filling and mass concrete complete all as specified and directed. |
| 110 | Supplying and laying of 40mm CPVC pipes SDR 11 and plain CPVC SDR 11 fittings on walls/ceiling or laing in floors (spout) complete all as specified and as directed |
| 111 | M&L Preparation of Old decorated surface and applying two coats of white wash on walls etc complete all as specified and as directed. |
| 112 | M&L Preparation of new decorated surface and applying two coats of white wash on walls etc including a coat of Birla Wall care putty 1mm thick wall putty complete all as specified and as directed. |
| 113 | Surface excavation not exc 30 cm and avg depth not exc 15 cm in soft/ loose soil complete all as specified and as directed. |
| 114 | Taking down copper/ aluminium point wiring(light, fan, socket or power) complete, including fittings and fixtures such as switches, ceiling roses, pendants, regulators, sockets, light fittings etc removing materials to store for keeping in safe custody or for taking credit (credit for above items should be made as per conditions seperately) and making good distrubed surfaces of wall, floors, etc complete. |
| 115 | M&L for Point wiring for One light point / ceiling Fan/Exhaust fan point/ Bell point controlled by one 5 Amps switch one way with PVC insulated and unsheathed FRLS cable single core multistranded copper conductor 1.5 sqmm size, 1100 volts grade cable conforming to IS-694 1990 drawn in and including PVC rigid non metalic concealed conduit on stone Bldg conforming to IS-9537 with all accessories including fabricated MS terminal boxes fixed flush with wall surface with 3mm thick laminated sheet top cover fixed with brass screw for mounting switches, sockets, regulator etc including 1.5 sqmm single core PVC insulated and unsheathed copper conductor earth continuity conductor to common earth and connecting to earth dolly complete all as specified and directed. |
| 116 | All as per item No 115 but for one light point controlled by one 5 Amps switch two way complete all as specified and directed. |
| 117 | All as per item No 115 but for one 3 pin socket point 5 Amp on independent board complete all as specified and directed. |
| 118 | All as per item No 115 for one 3 pin socket point 5 Amp on same board with other switches complete all as specified and directed. |
| 119 | All as per serial item No. 115 here-in-above but for one 3 pin 15/16 Amps socket outlet controlled by one 15/16 Amps switch on independent board with 2.50 Sqmm single core PVC insulated and unsheathed multistranded copper conductor FRLS cable 1100 Volt grade (ISI marked) including 2.50 Sqmm single core PVC insulated and unsheathed multistranded copper conductor FRLS cable 1100 Volt grade (ISI marked) as continuous earth wire in green colour |
| 120 | Supply and fix Switch piano, flush button single pole, 5 Amps one way complete all as specified and directed. |
| 121 | Supply and fix Switch piano, flush button single pole, 5 Amps two way complete all as specified and directed. |
| 122 | Supply and fix Switch sokcet combination flush type 5 Amp 2/3 pin muliti purpose complete all as specified and directed. |
| 123 | Supply and fix Switch socket combination flush type 6/16 Amps 3/3 pin universal multipurpose complete all as specified and directed. |
| 124 | Supply and fix Fan regulator electronic, step & socket type 230 volt, suitable for 1200/1400mm sweep ceiling fan complete all as specified and directed. |
| 125 | Supply and fix Ceiling rose surface bakelite 65x50mm three terminals including supply and fix PVC blocks complete all as specified and directed. |
| 126 | Supply and fix in repair Door bell electronic, multi music type, 230 volt AC complete all as specified and directed. |
| 127 | Supply and fix bell Push, flush type, 5 Amp, 230 volt AC complete all as specified and directed. |
| 128 | S&F in replacement LED tube light fitting of 10 watts 6000K , 230 volt, with aluminium extruded channel powder coated with diffuser for glare free light complete with all fixing accessories such as 2 nos of PVC square/round boxes, screws, etc and connecting up with three core flexible copper conductor cable of size 24/0.20 sqmm complete all as specified and directed |
| 129 | S&F in replacement LED tube light fitting of 20 watts 6000K , 230 volt, with aluminium extruded channel powder coated with diffuser for glare free light complete with all fixing accessories such as 2 nos of PVC square/round boxes, screws, etc and connecting up with three core flexible copper conductor cable of size 24/0.20 sqmm complete all as specified and directed |
| 130 | S&F in repair bldg security light light fittings 1x 35 Watt LED street light with New generation energy saving and environmental friendly long life LED street light made up of pressure die cast aluminium housing with high efficiency LED as lighting source and lens embedded PC cover having Bottom Opening seperate driver compartment with IP66 protection and impact resistance of IK08 with all accessories and including connection up with twine core twisted flexible copper conductor cable with 1.5 M long suitable size all as specified and directed. |
| 131 | S&F in repair security light bracket made out of 25 mm bore GI Light grade 1.00 M long to required shape as in bracket for steet light fittings fixed with two pair of MS flate iron clamp of size 32mm X 5 mm thickness of required shape with nuts, bolts and washers suitable for steel tubular pole including painting of mild steel flate iron surface with two coates of synthetic enamel paint over a coat of red oxide primer complete including taking down unserviceable one all as specified and directed. |
| 132 | Supply and fix in repair Sheet metal enclosure (ISI marked) distribution board TPN, 415 volts, 4 way Vertical type double door type, 200 Amps rated neutral copper bus bar for housing MCB and fixed and tested on completion complete all as specified and directed. |
| 133 | All as per item No 132 here-in before but SPN 8 ways DB complete all as specified and directed. |
| 134 | Supply and fix MCB single pole 6 to 32 Amps 240 volts, C series, 10 kA rupturing capacity complete all as specified and directed. |
| 135 | Supply and fix MCB single pole & neutral 40 to 63 Amps 240 volts, C series,10 kA rupturing capacity complete all as specified and directed. |
| 136 | Supply and fix MCB Tripple pole & neutral 40 to 100 Amps 415 volts, C series,16 kA rupturing capacity providing in DB complete all as specified and directed. |
| 137 | Supply and fix in replacement Sub main wiring with 2 runs of 6.0 sqmm, single core, PVC insulated & unsheathed cable conforming to IS-694, 1100 volts with copper conductor multi stranded drawn in existing non metallic PVC grey conduit with all accessories such as Tees, Elbows, junction box, reducers etc as requied alongwith one run of 6 sqmm single core PVC insulated & unsheathed copper conductor as continuos earth wire dolly and connecting to existing main switch board / distribution board of each building / qtr as ordered and testing on completion including taking down old submain wiring and type of conduit complete all as specified and directed. Note: 2 runs of 6.00 sqmm wiring and 01 run of 6.00 sqmm as earth wire shall be measured as one RM |
| 138 | M&L for taking down and dismantling of ceiling fan 1200mm/1400mm sweep 230 Volt 50 C/S AC of any make or model by opening the cover, separating down rod, rotor and stator assembly, locating the fault and making the fan fully in serviceable condition with & including replacing the bearing with similar type of exisitng one, worn out screws of the cover, split pin, twin core flexible copper wire of size 23/0.0076, locking nuts & machine screws with spring washer for ceiling fan blades, oiling and greasing etc, finally painting the ceiling fan with one coat of spray painting with white DUCO Paint & lettering & Numbering the same as per existing ,reassembling & testing the fan complete all as specified and directed. |
| 139 | M&L for rewinding of ceiling fan of size 1200mm/1400mm sweep, 230 volt, 50 C/S, AC by removing of burnt winding from stator and rewinding the same with super enamelled copper winding wire of same gauge, same weight & turns including varnishing of winding & reassembling complete all as specified and directed. Please Enable Macros to View BoQ information |
| 140 | M&L for rewinding of ceiling fan of size 1200mm/1400mm sweep, 230 volt, 50 C/S, AC by removing of burnt winding from stator and rewinding the same with super enamelled copper winding wire of same gauge, same weight & turns including varnishing of winding & reassembling complete all as specified and directed. Please Enable Macros to View BoQ information |
