|
| 1 | Taking down chowkats or frame not exc. 1.5 Sqm with shutters, without taking off shutters from the frame, complete all as specified and directed. |
| 2 | Taking down chowkats or frame exc. 1.5 sqm and n exc 4 Sqm with shutters (without taking off shutters from the frame) complete all as specified and directed. |
| 3 | Factory made single extruded WPC (Wood Polymer Composite) solid door/ window/ Ceosetory windows & other Frames/ Chowkhat of size 45 x 70mm comprising of virgin PVC polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/ wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) fabricated with mitre joints after applying PVC solvent cement and screwed with full body threaded star headed SS screws having minimum frame density of 750 kg/ cum, screw withdrawal strength of 2200 N (Face) & 1100 N (Edge), minimum comp ressive strength of 58 N/mm2 , modules of elasticity 900 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/ moisture proof and fire retardant and fixed in position with MS hold fast/ lugs/SS dash fasteners of required dia and length complete as per direction of Engineer-in-Charge. (M.S. hold fast/ lugs or SS dash fasteners shall be paid for separately). |
| 4 | Providing and fixing factory made single extruded WPC (Wood Polymer Composite) solid decorative type flush door shutter of size 30mm thick comprising of virgin polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/ wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) having minimum density of 650 kg/cum and screw withdrawal strength of 1800 N (Face) & 900 N (Edge), minimum compressive strength 50 N/mm2 , modulus of elasticity 850 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/moisture proof and fire retardant. WPC to be laminated with PVC foil of minimum 14 microns thick of approved design pasted with hot melt adhesive on both faces of shutter and fixing with stainless steel butt hinges of required size with necessary full body threaded star headed counter sunk S.S screws, all as per direction of Engineer-in- Charge |
| 5 | Factory made pressed steel frames of profile width 125mm x 60mm fabricated from 1.25 mm thick sheet, for doors with one or more rebate including necessary fixing lugs, hinges, lock strike plate, etc. & one shop coat of primer, including PCC 1:3:6, type C-1 in frame filling complete all as specified and directed. |
| 6 | Factory made pressed steel frames of profile width 105mm x 60mm fabricated from 1.25 mm thick sheet, for doors with one or more rebate including necessary fixing lugs, hinges, lock strike plate, etc. & one shop coat of primer, including PCC 1:3:6, type C-1 in frame filling complete all as specified and directed. |
| 7 | 30mm thick flush shutters, solid core construction, with block board core & plywood face panels, commercial type on both sides all as specified & directed by Engineer-in-charge. |
| 8 | Glazed and gauged skeleton shutter (Factory made) 35mm thick of second class hard wood open rebated & prepared to receive glass, gauge etc (without sash bars), edges of framing plain chamfered or rounded, fitted with cut & mitred beads for securing glass etc including priming coat. Size of members of shutters as specified in SSR Part I Section 8, clause 8.20 (a) including Kiln seasoned and chemically pressure treated, complete all as specified & directed. |
| 9 | Solid Panel PVC board 20mm thick with 2mm thick prelam PVC sheet on front & back with particle board core fixing in frame at site to cup board shutter, shelves and kitchen cabinet, complete all as specified & directed. |
| 10 | 18mm thick plywood , grade BWP, type BB fixed with screws to timber frame work, for shlef in cupboard & kitchen cabnet including wooden cleat and all necessary fiting, including dismantling of old board complete all as specified and directed. |
| 11 | Continuous (piano) hinges, mild steel bright finish, width of flap when open 30mm, complete all as specified and directed. |
| 12 | 100mm hasp and staple,aluminium anodised, including bolt to hinge plate and fixed with screws, complete all as specified and directed. |
| 13 | PVC body magnetic shutter catcher for cupboard & kitchen cabinet, complete all as specified and directed. |
| 14 | 100 mm size butt hinges medium weight, stainless steel complete, all as specified and directed. |
| 15 | 100mm size aluminium alloy handle (ISI Marked), fabricated type, complete all as specified & directed. |
| 16 | 100 mm size aluminium anodized, barrel tower bolt of extruded section complete all as specified and directed. |
| 17 | D' type, 100mm Extruded aluminium alloy handle fabricated type complete all as specified and directed. |
| 18 | 150 mm size aluminium , barrel tower bolt of extruded section complete all as specified and directed. |
| 19 | Mortice lock, verticle type, mild steel, 2 levers, size 75mm, complete all as specified and directed |
| 20 | Door closer hydraulically regulated cast iron body, designation No 2, universal type, suitable for door shutters of 701mm to 850mm in width and of weight between 36 to 60 Kg, complete all as specified and directed. |
| 21 | 300 mm long Aluminium alloy, anodised, sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast-aluminium alloy and fixed,complete all as specified and directed. |
| 22 | 300mm mild steel ordinary rat tail rod pattern spring including roller and roller plate, including welding on chowkhat complete all as specified and directed. |
| 23 | 25mm dia stainless steel curtain rod including fixing fancy types brackets, stops, rollers etc., as in repairs complete all as specified and directed. |
| 24 | Powder coated aluminium (minimum thickness of powder coating 50 micron) work for doors, windows, ventilators and partitions (Fixed portions) with extruded built up standard tubular sections/ appropriate Z sections and other sections of approved make conforming to IS: 733 and IS:1285, fixing with dash fasteners of required dia and size, including necessary filling up the gaps at junctions, i.e. at top, bottom and sides with required EPDM rubber/ neoprene gasket etc. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, Aluminium snap beading for glazing/ paneling, C.P. brass/ stainless steel screws, all complete as per architectural drawings and the directions of Engineer-in-Charge, including making good dismantled portion with PCC (1:2:4) type B-1 in CM 1:3 complete all as specified and directed. |
| 25 | Powder coated aluminium (minimum thickness of powder coating 50 micron) for shutters of doors, windows & ventilators including providing and fixing hinges/ pivots and making provision for fixing of fittings wherever required including the cost of EPDM rubber/neoprene gasket required (Fittings shall be paid for separately) with extruded built up standard tubular sections/ appropriate Z sections and other sections of approved make conforming to IS: 733 and IS:1285, fixing with dash fasteners of required dia and size, including necessary filling up the gaps at junctions, i.e. at top, bottom and sides with required EPDM rubber/ neoprene gasket etc. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, Aluminium snap beading for glazing/ paneling, C.P. brass/ stainless steel screws all complete as per architectural drawings and the directions of Engineer-in-charge. |
| 26 | Powder coated aluminium decorative grill (minimum thickness of powder coating 50 micron) of approved design / pattern (aperture of grill should not be more than 75mm) with approved standard section and fixed to the existing window frame with C.P. brass/ stainless steel screws @ 200mm center to center, including cutting the grill to proper opening size for fixing and operation of handles and fixing approved anodized aluminium standard section around the opening , including aluminium ‘U’ channel and all necessary fitting complete all as per requirement of Engineer-in-Charge. |
| 27 | Stainless steel wire cloth 0.36mm nominal dia of wire and average width of aperture 1.40mm including fixed with tinned tacks / stainless steel wire staples/ aluminum beading, complete all as specified & directed. |
| 28 | 4.80mm thick selected quality tinted glass, fixed to aluminium frame work in panels exc 0.5 Sqm in each pane, complete all as specified & directed. |
| 29 | 4.00mm thick selected quality tinted glass, fixed to aluminum frame work in panels exc 0.5 Sqm in each pane, complete all as specified & directed. |
| 30 | 3mm thick aluminium composite panel sheet (ACP) colour, including powder coated alumminium beading with EPDM packing area, stainless steel screw etc as approved by Engr In Charge all as specified and directed. |
| 31 | 4mm thick figured glass pin head type ordinary quality any size and in any type of frame and glazing with oil putty ( or beading ) in square n.exc 0.5 Sqm in each panes complete all as specified and directed. |
| 32 | Preparation of new wooden surfaces of any description over 10cm width or girth and applying two coats of synthetic enamel paint over a coat of pink primer complete all as specified and directed. |
| 33 | Preparation of new steel surface of any description, over 10 cm width or girth, not otherwise described and applying two coats of synthetic enamel paint (ordinary tint) over a coat of red oxide primer complete all as specified & directed by Engineer-in-charge. |
| 34 | Applying one coat of synthetic enameled paint on steel and iron surfaces over 10 cm width or girth including preparation of old surfaces complete all as specified & directed. |
| 35 | Preparation of old wooden surfaces of any description over 10cm width or girth and applying one coat of synthetic enamel paint complete all as specified and directed. |
| 36 | Dismantling floor hearth or wall tiling including cement mortar bedding (but not backing) removing serviveable tiles to store and rubbish off the premises complete all as specified and directed |
| 37 | Demolition of cement concrete unreinforced in ground floors, kota stone, granite flooring, tiles flooring and pavings not exceeding 15cm thickness (below or above ground level) and removal unserviceable materials, debris and rubbish all as specified & directed by Engineer-in-charge. |
| 38 | 100mm thick PCC 1:4:8 type D-2 (using 40mm graded crushed stone aggregate) as in sub base etc, finished even and rough complete all as specified and directed. |
| 39 | 25mm thick PCC 1:2:4 type B-0 (using 12.5mm graded crushed stone aggregate) as in sub base finished fair and even without using extra cement, complete all as specified and directed. |
| 40 | Cement concrete type B-0, 1:2:4 using (12.5 mm graded crushed stone aggregate) as in roof kerbs or mud stops, rounded or chamfered on edges in lintels upto 1.5m clear span, cills, steps, seismic and other similar bands, plinth courses, parapets and railings upto 60 cm in height, copings, bed plates, water troughs and the like including weathering, slightly rounded or chamfered angles and throating, including the use of forms or moulds with plain faces complete all as specified and directed. (Cement concrete item shall be reinforced, where ordered. Reinforcement shall be measured and paid separately). |
| 41 | Glazed coloured ceramic tiles in vertical surface 300mm x 450mm x 7mm thick, set and jointed in neat cement slurry and pointed in white or coloured cement to match the shade of tile, over and including 10mm thick rendering in cement mortar 1:4, complete all as specified and directed. |
| 42 | Non skid, first quality ceramic coloured tiles, 7 to 8 mm thick (square/ rectangular) area or each tile exceeding 0.11 sqm but not exceeding 0.18 sqm, in floors etc set and jointed in neat cement slurry and pointed in white or coloured cement to match the shade of tile, over and including 15mm thick screed bed in cement mortar 1:6 complete all as specified and directed. |
| 43 | Non skid, first quality ceramic coloured tiles, 7 to 8 mm thick (square/ rectangular) area or each tile exceeding 0.18 sqm but not exceeding 0.38 sqm, in floors etc set and jointed in neat cement slurry and pointed in white or coloured cement to match the shade of tile, over and including 15mm thick screed bed in cement mortar 1:6 complete all as specified and directed. |
| 44 | All as per serial item No 43 hereinbefore but on steps/ tread/ riser/ skirting / vertical surfaces laid over and including 10mm screed layer in cement mortar 1:4, cutting, rubbing, grinding and polishing complete, all as specified. |
| 45 | Vitrified ceramic tiles, light shade, 8-10mm thick (square/rectangular) , area of each tiles n.exc 0.36 sqm, in floors etc set and jointed in neat cement slurry and pointed in white or coloured cement to match the shade of tile, over 15mm thick screed bed in cement mortar 1:6, complete all as specified and directed. |
| 46 | All as per serial item No 45 herein before but on skirting etc over and including 10mm thick rendering in cement mortar 1:4 |
| 47 | Demolition of stone slabs and tiles of any description or thickness in floors laid, bedded and pointed in any mortar complete all as specified and directed. |
| 48 | Kota Stone Slab flooring, 18-20mm thick (one piece), best quality over and including cement screed bed 15mm thick in cement mortar 1:6, laid and jointed with grey cement slurry and pointed with grey cement mixed with pigment to match the shade of the slab including cutting, rubbing, grinding and polishing (Mirror finish) complete all as specified and directed. |
| 49 | All as per serial item No 48 hereinbefore but on skirting / vertical surfaces laid over and including 10mm screed layer in cement mortar 1:4, cutting, rubbing, grinding and polishing complete, all as specified. |
| 50 | 18-20mm thick Granite work (of any type table rubbed and polished) in steps, jambs, pillars, window- cills, cooking platforms and like in, set in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite inlcuding rounding of / moulding to edges of stone of any description including rubbing and polishing (Granite finish) compelte all as specified and directed. |
| 51 | Demolition of brickwork or stone/ boulder masonry, built in cement mortar including all quoins, arches, pillars, etc. but excluding ashlar facings, dressed stonework and precast concrete articles complete all as specified and directed. |
| 52 | Brick work with sub class ‘B’ bricks, straight or curved on plan exc 6 metre mean radius built in cement mortar 1:6 complete all as specified & directed. |
| 53 | Brick work with sub class ‘B’ bricks, straight or curved on plan to any radius in half brick thick walls built in cement mortar 1:4 complete all as specified & directed. |
| 54 | Demolition of RCC louvers / jalli in shaft & other similar place and removal of debris, upto 2km of site & dumped at a height n.exc 15cm including all necessary scaffolding and safety arrangement complete all as specified and directed. |
| 55 | Providing precast cement concrete 40mm thick RCC Jallies & louvrs, in (1:2:4) type B-0 using 12.5mm graded crushed stone aggregate, (measured solid), including all mouldings but excluding frame set in cement mortar 1:4 Complete all as specified and directed. |
| 56 | Demolition of reinforced cement concrete (reinforcement cut as required to faclitate demolition) in roofs, floors, beams, staircases, landing, chajjas and similar suspended work, complete all as specified and directed. |
| 57 | Reinforced cement concrete, type A-1, 1:1½:3 (nominal mix, using 20mm graded crushed stone aggregate) as in coloumns, pillars etc complete all as specified and directed (reinforcement shall be measured and paid for separately). |
| 58 | Form work to sides of pillars, posts, struts, coloumns and stanchions (cicular on plan) complete all as specified and directed. |
| 59 | Mild steel TMT bars 10mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9 mm complete all as specified and directed. |
| 60 | TMT bars for reinforcement, 6 to 8mm dia & over cut to length, bend to shape required, including cranking, bending spirally for hooping for columns hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips as in stirrups complete all as specified & directed by Engineer-in-Charge. |
| 61 | Taking down cement plaster from brick walls or concrete surfaces including raking out joints, hacking out for key, scrubbing down with water complete all as specified and directed and removing rubbish etc. complete all as specified and directed. |
| 62 | Dubbing out average 20mm thick on irregular faces of walls, exposed reinforced surfaces upto 15 metre height, in Cement and Sand mortar 1:4 complete all as specified and directed |
| 63 | Material and labour 5mm thick rendering in Cement and Sand mortar 1:3 concrete surfaces as in ceiling / chajjas facia at any position finished even and smooth without using extra cement complete all as specified and directedng |
| 64 | Rendering 15mm thick in Cement and Sand mortar 1:4 over fair faces of brick / concrete ,finished even and smooth without using extra cement, inclunding using water proofing compound complete all as specified. Note : WPC shall be measured and paid separately. |
| 65 | Supply only integral water proofing compound (ISI Marked) complete all as specified & directed. |
| 66 | Rendering 15mm thick in Cement and Sand mortar 1:6 over fair faces of brick/concrete surfaces ,finished even and smooth without using extra cement, complete all as specified and directed. |
| 67 | Applying Wall care putty (average thickness 1-2mm as required for desired smoothness and leveling of surfaces in two or more layers) and sand papering for making the surfaces even and smooth complete all as specified and directed. |
| 68 | Preparation of newly plastered wall surfaces and applying two coats of oil bound distemper in approved tint over a coat of primer, all as specified and directed. |
| 69 | Preparation of old decorated wall surfaces and applying two coats of oil bound distemper over a coat of chalk whiting complete all as specified and directed. |
| 70 | Applying Two or more coats of 100% Premium acrylic emulsion paint having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance, dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives @ 1.43 litre/ 10 Square metre over and including priming coat of exterior primer applied @ 0.90 litre/ 10 Square metre over old surfaces, complete all as specified and directed. |
| 71 | Two coats of oil bound distemper on ceiling surfaces over a caot of primer including preparation of new plastered surfaces complete all as specified and directed |
| 72 | Two coats of oil bound distemper on ceiling surfaces including preparation of old surfaces complete all as specified and directed. |
| 73 | PVC (SWR) floor trap 75mm bore, plain with grating including jointing to waste pipe jointed and setting/fixed in cement concrete type B-1, 1:2:4 , fixed as in repair complete all as specified and directed. |
| 74 | PVC (SWR) gully trap 125/110 mm, setting and jointing with solvent cement, fixed as in repair complete all as specified and directed. |
| 75 | Wash hand basin, vitreous china, flat back, white of size 550 x 400 mm with CP waste coupling, angle brackets, PVC waste pipe, fixed as in repair complete all as specified and directed. |
| 76 | Vitreous china, wash down water closet pan, white, pedestal pattern with ‘P’ or ‘S’ trap, seat cover (excluding, flushing cistern and flush pipe), fixed as in repair complete all as specified and directed. |
| 77 | Vitreous china bowl urinal flat back, half stall type, white with grating and union for discharge pipe (excluding flushing cistern, flush pipe and waste pipe), complete all as specified and directed. |
| 78 | Health faucet (ABS Body) mild steel chromium plated suitable for 15 mm dia pipe with 1.25 metre long flexible tube and ABS wall hook including making connections and fixed in position complete in all respect, fixed as in repair complete all as specified and directed. |
| 79 | Toilet paper holder of viterous china fixed to walls with chromium plated (CP) brass screws complete all as specified and directed. |
| 80 | PVC valve less syphonic action type flushing cistern low level white with PVC in let ball valve, float and handle, 10 ltrs capacity and connection to pipes including 32mm dia PVC long bend, set with concrete and making good to floor, fixed in repair complete all as specified & directed. |
| 81 | PVC connections 15 mm size with PTMT nuts of length 600 mm , fixed as in repair complete all as specified and directed. |
| 82 | Towel rail 600mm long of CP fixed with and including chromium plated brass screws and wooden / plastic cleats (minimum weight 190gms), fixed as in repair complete all as specified and directed. |
| 83 | Towel ring of CP fixed with and including chromium plated brass screws and wooden / plastic cleats (minimum weight 90gms), fixed as in repair complete all as specified and directed. |
| 84 | Looking mirror of size 600mmx450mm of selected quality mounted on PVC frame and back fixed to wall with screw and rawl plugs, fixed as in repairs,complete all as specified and directed. |
| 85 | Taking up or down PVC/GI tubing and connections 15mm bore, complete all as specified and directed. |
| 86 | Taking up or down PVC/GI tubing and connections 20mm bore, complete all as specified and directed. |
| 87 | 15 mm bore Galvanized Steel tubes, medium grade including all fittings for flush pipes, water supply pipes etc., fixed to walls and ceilings or laid in floors, complete all as specified and directed. |
| 88 | 20 mm bore Galvanized Steel tubes, medium grade including all fittings for flush pipes, water supply pipes etc., fixed to walls and ceilings or laid in floors, complete all as specified and directed. |
| 89 | All as per item No. 88 hereinbefore but fixing only (old serviceable tubings to be reused) |
| 90 | Cutting chases in brick walls, pinning in, making good to facings where required and pointing in cement mortar (1:3) to ends or edges of landings, steps, cills, sunshades, shelves, lintels, etc and cutting chases for concealed water tubing or concealed conduit wiring etc and making good, cutting not exceeding 10cm girth Complete all as specified and directed . |
| 91 | 20mm bore Gun-metal, globe or gate valves, with iron wheel head, screwed both ends for iron pipe and fixed, fixed as in repair complete all as specified and directed. |
| 92 | Bib tap brass, fancy type, long body with wall flange, standard chromium plated, cast copper alloy, screwed down for iron pipe or for brass ferrule, suitable for 15mm bore pipe, fixed as in repairs complete all as specified and directed. |
| 93 | Two way Bib tap brass, fancy type, (incl fixing arrangement of health faucet) long body with wall flange, standard chromium plated, cast copper alloy, screwed down for iron pipe or for brass ferrule, suitable for 15mm bore pipe, fixed as in repairs complete all as specified and directed. |
| 94 | Angular stop cock, fancy type, cast copper alloy chromium plated, screwed down, screwed both and for iron pipe or for union, suitable for 15mm bore pipe, fixed as in repairs complete all as specified and directed. |
| 95 | Brass Mixer of chromium plated hot and cold water screwed down for iron pipe or for union, for WHB suitable for 15mm bore pipe, fixed as in repair, complete all as specified and directed |
| 96 | 15mm bore pillar tap, fancy type, cast copper alloy, with capstan heads, chromium plated, screwed down high pressure with or without lettered ‘Hot’ or ‘Cold’ with long screwed shanks and fly nuts, screwed for iron pipe, fixed in repair, complete all as specified and directed. |
| 97 | 5.5mm thick corner glass shelf 300mm radius chromium plated with brass brackets, with CP bracket guard and railing fixed as in repair complete all as specified and directed. |
| 98 | Taking down eaves gutters and rainwater pipes (any size or pattern), including all fittings, heads, shoes, bends, swan-necks, etc., including cleaning or refixing or removal to Store (measured overall as fixed along the centre line over fittings and accessories) complete all as specified and directed. |
| 99 | PVC (SWR) rain water pipe, 110mm bore, single socketed in any length of pressure rating 6 kgf/cm2 with rubber ring joints, laid in floors in trenches, complete all as specified and directed. |
| 100 | PVC (SWR) rain water pipe, 75mm bore, single socketed in any length of pressure rating 6 kgf/cm2 with rubber ring joints, laid in floors in trenches, complete all as specified and directed. |
| 101 | PVC (SWR) bend 110mm bore any radius, of pressure rating 6 kgf/cm2, complete all as specified and directed |
| 102 | PVC (SWR) bend 75mm bore any radius, of pressure rating 6 kgf/cm2, complete all as specified and directed |
| 103 | PVC (SWR) junction single, (Single T) equal or unequal 110mm dia of pressure rating 6 kgf/cm2, with access door complete all as specified and directed |
| 104 | PVC (SWR) junction single, (Single T) equal or unequal 75mm dia of pressure rating 6 kgf/cm2, with access door complete all as specified and directed |
| 105 | 75mm thick plain cement concrete type C-1 1:3:6 (Using 20mm graded crushed stone aggregates) as in plinth protection finished fair and even without using extra cement complete all as specified and directed.Note : 10mm construction joint will be provided and panel should not be more than 3metre in length and joint filled with filler bitumen and sand in ratio (1:3) |
| 106 | Dismantling of existing brick tiles or terracing tiles single layer on roof grouted in cement mortar complete all as specified & directed. |
| 107 | 50mm thick average thickenss PCC 1:2:4 type B-0 (using 12.5mm graded crushed stone aggregate) as in roof padding, roof kerbs rounded or chamfered on edges including using water proofing compound complete all as specified and directed. Note : WPC shall be measured and paid separately. Please Enable Macros to View BoQ information |
| 108 | 50mm thick average thickenss PCC 1:2:4 type B-0 (using 12.5mm graded crushed stone aggregate) as in roof padding, roof kerbs rounded or chamfered on edges including using water proofing compound complete all as specified and directed. Note : WPC shall be measured and paid separately. Please Enable Macros to View BoQ information |
