|
| 1 | S&F Taking down chowkats or frames incl shutters (without taking off shutters from the frames) n.exc. 1.50 sqm each, and removing from site, complete all as specified and directed. |
| 2 | Taking down chowkats or frames incl shutters (w/o taking off shutters from the frames) exc. 1.50 sqm but n.exc. 4 sqm each and removing from site, complete all as specified and directed. |
| 3 | Taking down shutters of any description exc 1sqm but n. exc 2 sqm each complete all as specified and directed. |
| 4 | M&L Pressed steel frames of size 165x60mm for doors with one or more rebates incl necessary fixing lugs, hinges, lock strike plate, etc and providing one shop coat of primer and tarring back side of frame, complete all as specified and directed. |
| 5 | M&L Pressed steel frames of size 105x60mm for doors with one or more rebates incl necessary fixing lugs, hinges, lock strike plate, etc and providing one shop coat of primer and tarring back side of frame, complete all as specified and directed. |
| 6 | M&L mild steel hold fast & similar articles confirming to Fe-290 Gde E-165 complete all as specified and directed. |
| 7 | M&L Plain cement concrete, M-15 (Nominal mix), type B-0 (Using 12.5mm graded stone aggregates) as in filling of steel chowkats or frames, cills and hold fast etc.complete all as specified and as directed. |
| 8 | S&F S&F Providing and fixing factory made single extruded WPC (Wood Polymer Composite) solid decorative type flush door shutter of size 35mm thick comprising of virgin polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/ wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) having minimum density of 650 kg/cum and screw withdrawal strength of 1800 N (Face) & 900 N (Edge), minimum compressive strength 50 N/mm2, modulus of elasticity 850 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/moisture proof and fire retardant. WPC to be laminated with PVC foil of minimum 14 microns thick of approved design pasted with hot melt adhesive on both faces of shutter and fixing with stainless steel butt hinges of required size with necessary full body threaded star headed counter sunk S.S screws, all as per direction of EngineerIn- Charge. (Note: stainless steel butt hinges and necessary S.S screws shall be paid separately) . Complete all as specified and directed. |
| 9 | S&F 35 mm thick, single piece factory made wire gauge door shutter and incl of wire cloth (stainless steel & aluminium XPM) manufacturing by PVC sheets printed 5mm thick on both side on frame made out of M.S tube 19 SWG, size 19x19 mm complete in all respect with lock rail & beautified by PVC beading all around fixed with PVC solvent cement complete as per Drg No.CEPZ/TD-378/Sheet 1/1 dated 27/12/2011 complete all as specified and directed. |
| 10 | S&F Solid PVC door frame of size 50x 47mm made out of 5mm plain colour PVC sheet reinforced with MS square tube, S&F in opening as per specification & drawing shown in SSR Part-II, complete all as spfd and directed. |
| 11 | S&F Factory made solid panel PVC door shutter 30mm thick (stile) consisting of frame made out of MS tubes for top and bottom rails. MS frame shall be covered with heat moulded plain colour PVC channel having a PVC sheet strip of 20mm width struck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail and bottom rail on either side and as gap insert for top rails and bottom rail, panelling of plain colour PVC sheet to be fitted in the MS frame welded / sealed to in stiles & rails with suitable PVC sheet beading and joinned together with solvent cement S&F in frames at site as per specification and drawing shown in SSR Part-II, complete all as specified and directed. |
| 12 | S&F Powder coated aluminium (minimum thickness of powder coating 50 micron) work for doors, windows, ventilators and partitions (Fixed portions) with extruded built up standard tubular sections/ appropriate Z sections and other sections of approved make conforming to IS: 733 and IS:1285, fixing with dash fasteners of required dia and size, including necessary filling up the gaps at junctions, i.e. at top, bottom and sides with required EPDM rubber/ neoprene gasket etc. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, Aluminium snap beading for glazing/ paneling, C.P. brass/ stainless steel screws,complete all as specified and directed. |
| 13 | S&F Powder coated aluminium (minimum thickness of powder coating 50 micron) for shutters of doors, windows & ventilators including providing and fixing hinges/ pivots and making provision for fixing of fittings wherever required including the cost of EPDM rubber/neoprene gasket required (Fittings shall be paid for separately) with extruded built up standard tubular sections/ appropriate Z sections and other sections of approved make conforming to IS: 733 and IS:1285, fixing with dash fasteners of required dia and size, including necessary filling up the gaps at junctions, i.e. at top, bottom and sides with required EPDM rubber/ neoprene gasket etc. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, Aluminium snap beading for glazing/ paneling, C.P. brass/ stainless steel screws complete all as specified and directed. |
| 14 | S&F Anodised aluminium grill (anodised transparent or dyed to required shade according to IS: 1868 with minimum anodic coating of grade AC 15) of approved design/pattern, with approved standard section and fixed to the existing window frame with C.P. brass/ stainless steel screws @ 200 mm centre to centre, including cutting the grill to proper opening size for fixing and operation of handles and fixing approved anodised aluminium standard section around the opening, complete all as specified and directed. |
| 15 | S&F 4 mm thick figured glass pin head type and glazing with oil putty in squares n.exc. 0.50 sqm in each pane, complete all as specified and directed. |
| 16 | S&F 4 mm thick sheet glass Selected quality sheet glass of aluminium works in any shape exceeding n exc0.5 Square metre in each pane complete all as specified and directed. |
| 17 | S&F Stainless steel cold rolled butt hinges, medium weight, 100mm long, complete all as specified and directed. |
| 18 | S&F Aluminium anodised barrel tower bolt of extruded section, 150mm long complete all as specified and directed. |
| 19 | S&F 150mm long aluminium handle, cast type, anodised complete all as specified and directed. |
| 20 | S&F Mild Steel sliding door bolts, 300 mm long, plate type, stove enamelled black, with bright bolts not less than 12mm dia with & including a minimum of 6 bolts and nuts, four on bolt plate and two on staple plate etc complete all as specified and directed. |
| 21 | S&F 140mm long floor door stopper of aluminium alloy body and tongue with hard drawn steel spring complete all as specified and directed. |
| 22 | S&F Stainless steel wire cloth. 0.36mm nominal dia of wire and average width of aperture 1.40mm and fixed with stainless steel wire staples, complete all as specified and directed. |
| 23 | M&L Water proofing treatment on RCC roof etc. comprising with the following operation & as specified herein below:- (a)Taking down existing old tarfelt, bituminous compound including cleaning & removing debris as specified and as directed(b) Cutting out cracks to V-section in existing roofs or terracing, cleaning out and filling solidly with a hot mixture of bitumen and clean dry sand 1:1 (by weight) (c)Preparing & cleaning of fully dried cement concrete surface.(d) Applying one coat of cold bituminous primer to the plastered surface @ 0.30 litres per sqm conforming IS-3384(e) A layer of APP based polymeric membrane 3mm thick (minimum) weighing 3.5 kg per sqm reinforced with polyster non woven fabric.The over lap shall be minimum 75 mm in length side and 100 mm with side. Application of polymeric membrane shall be by torch application complete all as specified and directed.. |
| 24 | M & L 10 mm thick rendering on fair faces of concrete surface is in cm 1:3 to be finished even and smooth with out suing extra cement under roof treatment mixed with water proofing compound (to be measured and paid seperately) complete all as specified and directed. |
| 25 | M & L Plain cement concrete, M-15 (Nominal Mix), type B-0,1:2:4 (using 12.5mm graded aggregates) as in roof kerbs, mud stops, roof padding etc using water proofing compound, complete all as specified and directed.Note : WPC compound measured and paid and seperately |
| 26 | Supply integral water proofing compound complete all as specified and directed. |
| 27 | Dismantling floor, hearth wall tiling incld cement mortar bedding (but not backing) removing servicable tiles to store & rubbish off the premises. Complete all as specified and directed. |
| 28 | M&L for joint free (edge cut) coloured glazed ceramic tiles 7 mm to 8 mm thick (square / rectangular) polished of size 300x 450x 7 mm, 300X 600X 7mm as in skirting / dado etc laid over and including 10 mm thick backing coat in cement mortar 1:4, set and jointed in neat cement slurry and pointed with coloured cement to match the tiles complete all as specified and directed. |
| 29 | M&L for Non skid, joint free (edge cut) coloured ceramic tiles 7 to 8 mm thick (Square / rectangular) polished area of each tile 300X300 mm / 400X400 mm as in floors etc laid over and including 15 mm thick screed bed or bedding layer in cement mortar 1:6, set and jointed in neat cement slurry and pointed with coloured cement to match the tiles complete all as specified and directed. |
| 30 | M&L for Non skid/Matt finish of joint free (edge cut) coloured/digital ceramic tiles 7 to 8 mm thick (Square / rectangular) polished area of each tile 600 x600 mm as in floors etc laid over and including 15 mm thick screed bed or bedding layer in cement mortar 1:6, set and jointed in neat cement slurry and pointed with coloured cement to match the tiles complete all as specified and directed. |
| 31 | All as per item No 30 above but in skerting.including 10 mm thick backing coat in cement mortar 1:4, set and jointed in neat cement slurry and pointed with coloured cement to match the tiles complete all as specified and directed. |
| 32 | M&L for Machine cut kota stone slab flooring 20-25mm thick over cement screed base laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing complete all as specified and directed. |
| 33 | M&L for cement concrete type B-1, 1:2:4 (20mm graded stone aggregate) 25mm thick as in leveling course of flooring & roof complete all as specified and directed. |
| 34 | M&L 18 to 20mm thick granite (of any type) tiles, bedded and jointed with grey cement slurry and pointed with white cement (1:2) with admixture of pigment to match the shade of granite stone incl grinding and polishing complete over 15mm thick screed bed in CM 1:6, complete all as specified and directed. |
| 35 | Dmolition of stone/brick/concrete block masonry built in Cement mortarcomplete all as specified and directed. |
| 36 | M & L brick work with sub class -B bricks, straight or curved on plan exc 6mtr mean radius built in CM 1:6. complete all as specified and directed. |
| 37 | M&L for walling of RR, uncoarsed, well bonded bedded & solidly hearted built in cement mortar 1:6 complete all as specified and directed. |
| 38 | M&L for providing cement concrete in coping type B1 1:2:4 (20 mm graded stone aggregate) complete all as specified and directed. |
| 39 | Demolition of cement concrete (Unreinforced) in ground floor and pavings n exc 15cm thick ness (below or above ground level) complete all as specified and directed. |
| 40 | M&L PCC 1:3:6: type C-2 (using 40 mm graded crushed stone aggregate) mass concrete of foot path hard standings etc. complete all as specified and directed. |
| 41 | M& L Glazed Machine pressed precast concrete coloured interlocking paver block laid in floor with grey cement and and pigment, any shape and size conforming to IS-15658-2006 of 60mm thickness M-35 grade over and incl 50 mm thick layer of sand cushioning, complete all as specified and directed . |
| 42 | M&L extra forming fain finished drain or channel 30 cm inner girth in cement concrete, using extra cement including forms, moulds mitred/stopped end etc complete all as specified and directed. |
| 43 | M & L Plain cement concrete, M-10 (Nominal Mix) type C-1 (using 20 mm graded crushed stone aggregates) as in surface channels or drains etc, complete all as specified and directed. |
| 44 | M&L 50 mm thick, PCC M-10 (Nominal Mix), type B-1 (using 20mm graded crushed stone aggregates) as in plinth protection/ foot path finished even and smooth without using extra cement, complete all as specified and directed. |
| 45 | Taking down cement plaster incl tiles of any description on brick or stone or cement concrete walls incl raking out joints, hacking for key, scrubbing down with water etc, complete all as specified and directed. |
| 46 | M&L Rendering 10 mm thick on Brick/stone masonry or other than fair faces of brick wall in CM 1:6 finished even and fair without using extra cement, complete all as specified and directed. |
| 47 | M & L 15mm thick rendering on fair faces of brick work / stone masonry, concrete surface in cm 1:4 to be finished even and smooth with out suing extra cement using WPC as per manufacturing instruction complete all as specified and directed. |
| 48 | M&L Rendering 10mm thick on concrete surfaces as in facia or ceiling in CM 1:3 finished even and fair without using extra cement, complete all as specified and directed. |
| 49 | M&L two coats of white wash on newly plastered ceiling surfaces including preparation of surfaces complete all as specified and directed. |
| 50 | M&L one coats of white wash on old surfaces on ceiling including preparation of old surfaces complete all as specified and directed. |
| 51 | M&L two coats of OBD over a coat of chalk whiting with apply of 2 to 3 mm thick wall careputty of smooth surfece using of Roller on newly plastered wall surfaces complete all as specified and as directed. |
| 52 | M&L two coats of OBD over a coat of chalk whiting with apply of 2 to 3 mm thick wall care putty of smooth surfece using of Roller on old plastered wall surfaces complete all as specified and as directed. |
| 53 | M&L for Material & Labour for applying Two or more coats of 100% Premium acrylic emulsion paint having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance, dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives @ 1.43 litre/ 10 sqm over and including priming coat of exterior primer applied @ 0.90 litre/ 10sqm over 1 mm thickness plaster of paris putty over plastered surface to prepare the surface even and smooth.over new surfaces complete all as specified and directed. Make:-Nerolac(Exel), Asian Paint (Apex ultima), Dulux (weather shield water proof), Berger (weather coat all guard). |
| 54 | M&L for preparation of old decorated surfaces of walls soffits, facia roof and applying, Acrylic Smooth exterior paint of required shade : New work (Two or more coat applied @ 1.67 ltr/10 sqm over and including priming coat of exterior primer applied @ 2.20 kg/10 sqm as per manufacturer’s instructions etc complete all as specified and directed.Make:-Nerolac(Exel), Asian Paint (Apex ultima), Dulux (weather shield water proof), Berger (weather coat all guard). |
| 55 | M&L Preparing of new surfaces of steel of any description, over 10 cm width or girth not other wise described and appliying two coats of synthetic enamel paint over a coat of red oxide, zinc chrome primer, complete all as specified and directed. |
| 56 | M&L for repairing the edges / corner of Chajja / roof projection and similar work by removing of plaster width / girth exceeding 15 cm & n exc 30 cm and making good with 15 mm thick rendering in cement mortar 1:3 to match with including chicken wiremesh netting on existing surface complete all as specified and directed. |
| 57 | Dismantling of 75 / 100 mm dia cast/PVC drain pipes, jointed in cement mortar fixed in trenches and taking out of trenches removing where directed complete all as specified and directed. |
| 58 | S&F PVC (SWR) pipes 75 mm bore dia, single socketed, in any length with rubber ring joints, laid in trenches or in floors etc complete all as specified and directed. |
| 59 | S&F PVC (SWR) pipes 110 mm bore dia, single socketed in any length with rubber ring joints fixed to walls etc including complete all as specified and directed. |
| 60 | S&F PVC (SWR) bends 75 mm bore dia complete all as specified and directed. |
| 61 | S&F PVC (SWR) bends 110 mm bore dia complete all as specified and directed. |
| 62 | S&F PVC (SWR) branch piece,110 mm bore single (single Y) equal or unequal complete all as specified and directed. |
| 63 | S&F PVC SWR floor trap, with grating including jointing to waste pipe fixed in cement concrete type B-1(1:2:4) 75mm bore with grating complete all as specified and directed. |
| 64 | S&F PVC (SWR) 110 mm bore vent cowl complete all as specified and directed. |
| 65 | S&F Compound girders and stanchions, lattice girders, aerial masts, staging for water tanks and the like including caps, bases, splices etc. built up from two or more beam or channel sections or angles with plates, including all lattice bars, stiffeners, gusset plates, etc' gde Fe 410-W (Grade E-250) quality 'B complete all as specified and directed. |
| 66 | M&L for Cement concrete 1:3:6 Type C2 in walls or retaining walls, any thickness, size or shape including pilasters, buttresses columns, pillars, boundary pillars and posts (including caps and bases) complete all as specified and directed. |
| 67 | S&F 1000 ltr Rotational moulded polyethylene water storage tanks (cylindrical vertical with closed top) hoisted and fixed in position all as specified in SSR Part I, including all fitting such as connection pieces with GI tank nipple for inlet, outlet, washout and overflow etc and including 25 mm size Ball valves high pressure of PTMT with epoxy coated Aluminium rod & high density plastic ball screwed for iron pipe (including dismantling) complete all as specified and directed. |
| 68 | S&F in repair vitreous china Semi pedestal pattern (Concealed type) white connection to trap 'P' or 'S' and flush pipe etc seat cover and making good to disturbed surfaces of floor by filling with PCC 1:4:8 type D-2 to match with existing including taking down the existing old one complete all as specified and directed. |
| 69 | S&F in repairs 10 Liter capacity PVC symphonic action type flushing cistern (ISI Marked) low level with inlet ball valve, float and handle & PVC flush pipe, fixed in position and connecting complete all as specified and directed. |
| 70 | S&F PVC Connections 15 mm size with PTMT nuts of length 450mm complete all as specified and directed. |
| 71 | S&F In repairAluminium anodised Tubular towel rail, 20mm dia, 60 cm long, CP with a pair of brackets, fixed to wall with CP brass screw and PVC rowl plugs , complete all as specified and directed. |
| 72 | S&F 600mm x 450mm bevelled edge mirror of selected quality glass, mounted on 6mm thick AC plain building board or commercial ply wood and fixed to wooden plug with chromium plated brass screw and cup washers complete all as specified and directed. |
| 73 | S&F in repair bib taps 15mm bore cast copper alloy fancy type with crutch or butterfly, handle, screwed down, screwed for iron pipe complete all as specified and directed. |
| 74 | S&F in repair 15 mm bore stop valve/angle cock cast copper alloy with screwed down high pressure, with crutch or butterfly handle screwed both ends for iron pipe or for unions complete complete all as specified and directed. |
| 75 | S&F in repair 25 mm Gun metal Gate valves fitted for iron pipe complete all as specified and directed. |
| 76 | S&F swivel shower of PTMT any colour for fixing with 15mm dia pipe (Min weight 40 gms) complete all as specified and directed. |
| 77 | S&F shower arm 15mm size 195mm long with bend of 45 degree with flange of PTMT any colour (Min weight 40 gms) complete all as specified and directed. |
| 78 | Taking up or down 15mm bore steel water tubing and connections, including cleaning for refixing or removal to store complete all as specified and directed. |
| 79 | Taking up or down 20mm bore steel water tubing and connections, including cleaning for refixing or removal to store complete all as specified and directed. |
| 80 | Taking up or down 25mm bore steel water tubing and connections, including cleaning for refixing or removal to store complete all as specified and directed. |
| 81 | S&F steel water tubing, 15 mm bore, galvanised , \\"medium grade\\" with all fittings and fixtures and short lengths, fixed to wall and ceiling or laid in floor including cutting chases for concealed work in required etc, complete all as specified and directed. |
| 82 | S&F steel water tubing, 20 mm bore, galvanised , \\"medium grade\\" with all fittings and fixtures and short lengths, fixed to wall and ceiling or laid in floor including cutting chases for concealed work in required etc, complete all as specified and directed. |
| 83 | S&F steel water tubing, 25 mm bore, galvanised , \\"medium grade\\" with all fittings and fixtures and short lengths, fixed to wall and ceiling or laid in floor including cutting chases for concealed work in required etc, complete all as specified and directed. |
| 84 | Cutting chase, pinning in making good to faceing where required and pointing in cement mortar 1:3 to ends or edges of landing, and cutting chase for concealed water tubing or concealed conduit wiring etc and making good cutting exc 10cm but n exc 20cm complete all as specified and directed. |
| 85 | S & F not less than 18 mm thick plywood grade BWR, type BB fixed with screws for shelves, kitchen cupboars etc, to timber frame work or ply wood including 3 mm thick teak wood lapping on edge complete all as specified and directed. Make : century, Kitply, GreenPly |
| 86 | Supply & paste 0.90 mm thick Decorative laminate type 1 of surface finish, colour and pattern as approved, fixed with approved adhesive as per manufacturer's instructions complete all as specified and directed. Make : Sunmica, Formica, century liminates |
| 87 | 40mm dia, cupboard knobs fixed with nut, screw and washer of mild steel, bright finished, complete all as specified and directed |
| 88 | S&F S & F 30mm Continuous (piano) hinges, mild steel, bright finish or electrogalvanised complete all as specified and directed. |
| 89 | S&F in repairs Stainless steel double sink , made out of 1.00mm thick sheet for kitchen or laboratory with plug, washers waste pipe, cast iron cantilever brackets, connecting union overall size 915mmx460mm with bowl size 410mm x 330mm x 160mm complete all as specified and as directed. |
| 90 | S&F kitchen plate rack made of SS 0.80mm thick sheet standered size 900x900x325mm and designed as approved by GE fixed to wall with wooden/ plastic plug and Screw complete all as specified as directed. |
| 91 | S&F in repairs 25 mm drapery rod Stainless Steel Complete all as specified and as directed. |
| 92 | S&F in repair drapery rod Brackets both side complete all as specified and as directed. |
| 93 | M&L rendering 15mm thick plaster on brick masnory / stone masonry or other than fair faces of brick wall in cement mortar 1:6 finished even and fair without using extra cement , complete all as specified and directed. Note : WPC compound may be used as per ground which is to be measured and paid seperately complete all as specified and directed. |
| 94 | M&L preparing new plastered or unplastered surface of walls and applying two coats of crment base paint complete all as specified and directed. |
| 95 | Demolition of brickwork or stone/boulder masonry built in cement mortar or cement lime mortar including all quions, arches, pillers, etc but includingb ashler facing , dressed stone work precast concrete articles complete all as specified and directed. |
| 96 | M&L brick work with sub class 'B' brick straight and curved on plan, exceeding 6m mean radius with old size bricks, built in cement mortar 1:6 complete all as specified and directed. |
| 97 | M&L for raking of joints/pointing to squared rubble masonry, coursed or uncoursed in walls in CM 1:3 complete all as specified and directed. |
| 98 | Dismantling wall and ceiling boards (fiber, pulp, insulation etc and of any description) or insulation boards any thickness, including cover fillets, complete all as specified and directed. |
| 99 | Dismantling timmber scantling like fillets, rails, posts, rafters, purlins etc under 40 Sq. cm in section, in any position complete all as specified and directed. |
| 100 | M&L second class soft plains filltets sqaure or rectangular in sections bull - nosed splayed , roundrd on one edge or face area exc 6 sq.cm but not exc 13sq.cm secured with nails or brads complete all as specified and directed. |
| 101 | S&F GI framework for seamless ceiling comprisding of GI perimeter channel 0.55 mm thick with two unequal flanges of 20 and 30 mm and web of 27mm fixed to surrounding wall using nylon sleeves and screws at 450mm center tocenter/ intermediate channel 0.9mm thick having two equal flanges of 15mm each and web 45 mm suspended from soffit at appeox 900mm center to center with GI cleat and steel expansion fastners with and including ceiling section (not exc 1.2 m length) of 0.55 mm thickness having kurled web of 50mm and flange of 26 mm each with clips of 10.5mm fixed to intermediate channel with connecting clips across the intrmediate channel at 457mm center to center complete all as specified and directed. |
| 102 | Non asbestos fiber cement building boards 4mm thick fixed or laid/inserted to timber/GI/Aluminium framework with screws complete all as specified and directed. |
| 103 | Plywood, grade BWR, type BB, fixed with screws to timber frame work and ceiling & wall 6mm thick complete all as specified and directed. |
| 104 | M&L prepartion of new wooden surface of any description not otherwise described,over 10 cm width or girth and applying two coats of synthetic enamel paint over one coat of pink primer, complete all as specified and directed. |
| 105 | M&L prepartion of old wooden surface of any description not otherwise described,over 10 cm width or girth and applying two coats of synthetic enamel paint over one coat of pink primer, complete all as specified and directed. |
| 106 | M&L for Virified Ceramic tiles 10 mm thick (square/ rectangular) Light shade polished, area of each tiles not exceeding 0.36 sqm, in floors etc, set and jointed in neat cement slurry and pointed in white or coloured cement to match with and including 15mm thick screed bed or bedding layer in CM 1:4 complete all as specified and directed. |
| 107 | M&L for Virified Ceramic tiles 10 mm thick (square/ rectangular) Light shade polished, area of each tiles not exceeding 0.36 sqm, in skirrting/dado etc, set and jointed in neat cement slurry and pointed in white or coloured cement to match the colour of tile over including 10mm thick backing coat in CM 1:4 complete all as specified and directed. |
| 108 | Dismatling boarding, any discription, fixed in any position with nails complete all asspecified and directed. |
| 109 | Weather boarding, clean swan, plain 20mm thick of feather edge 15mm to 20mm thick and fixed with 30mm laps complete all as specified and directed. |
| 110 | M&L second class hard wood in scantling timber frame and fixed clean saw complete all as specified and directed. |
| 111 | S&F 0.80mm in thickness plain, mild steel sheeting, in ridges, hips vally gutters, drips and straight flashing (length and girth as fixed) with grade of zinc coating 275 complete all as specified and directed. |
| 112 | Hacking out old broken glass from wood or steel frame or frames of any description complete all as specified and directed. |
| 113 | S&F 3mm thick transparent fiber glass ordinary quality as in glazing not exc 50sqm each pane fixed in wood or steel farmes with oil putty or wooden beades or self tapping screws complete all as speified and dircted. |
| 114 | M&L for rolled sections (like beams, channels, angles, flats or other type of section) Fe-410 -W (Gde- E 250) quality-B as in farming fpor cladding, glazing and like the fixed with angle cleats and connecting plates, etc. complete all as specified and directed. |
| 115 | Excavting in post holes in soft/loose soil (or similar holes) each n. exc 0.5 Cum getting out returning, filling in and rammming earth or broken rubble mixed with earth around, in layers not exc. 25 cm watering and removing surplus soil to distance n exc 50m and making good surface complete all as specified and directed. |
| 116 | S&F for steel work in tubular hollow section trusses including special shaped wasjer etc. complete using ERW or induction butt welded tubes conforming to I.S.1161-1979 grade St-240 complete all as specified and directed. |
| 117 | Demolition of cement concrete (reinforced) of any description and any position not otherwise specifically provided (reinforce cut as required to facilitate demotition), complete all as specified and directed. |
| 118 | M&L for providing, precast cement concerete (1:2:4) type B-1 (20mm graded crushed stone aggregate) set in CM 1:4 in landing, cover slab (for manhole etc.) chullah hoods, chajja, water trough, mangers shelves and similar article with plane face including formwork etc complete all as specified and directed. |
| 119 | M&L TMT bars 10mm dia and over, cut to length, bent to shape require, incl cranking, bending, spirallyt for hopping for column, hooking ends and binding with incl mild steel iwire (annealed) not less than 0.9mm dia complete all as specified and directed. |
| 120 | Demolition of cement concrete unreinforeced in ground floors, kota stone, granite flooring, tiles flooring and paving's not exc. 15cm thickniss (below or above ground level) and removal unserviceable materials, debris and rubbish to a distance not exc. 100m complete all as specified and directed. |
| 121 | Removing of surplus soil to a distance n exc 50 m and depositing where directed at a level n exc 1.5m above the strating point in soft/loose soil complete all as specified and directed. |
| 122 | M&L for laying chequered cement concerete tile 20cmx20cmx25mm thick, set jointed and pointed in neat cement slurry in floors with grey cement and pigment over 20mm screed bed in CM 1:6 complete all as specified and directed. |
| 123 | M&L for 50mm thick PCC 1:3:6 type C-2 (using 40mm crushed stone aggregate) as in sub base etc and finished even without using extra cement, conplete all as specified and directed. |
| 124 | Taking down carefully existing aluminum / copper point wiring (light, fan, socket or power point) complete of any description including fitting such as switches, ceiling roses, pendants, tube light fitting, fan regulators, sockets, wooden boards, laminated sheets from sunken boxes, boards, shades light fitting etc and making good the disturbed surfaces of walls, floors, ceiling etc to match with existing surfaces complete all as specified and directed. |
| 125 | Taking down un-serviceable DB of any size and capacity including MCB etc, and removing materials to store for keeping in safe custody or for taking credit and making good disturbed surfaces of walls,floors, etc, complete all as specified and directed. |
| 126 | Taking down un-serviceable sub main wiring of any type and any size from wall, ceiling etc. complete all as specified and directed. Please Enable Macros to View BoQ information |
| 127 | Taking down un-serviceable sub main wiring of any type and any size from wall, ceiling etc. complete all as specified and directed. Please Enable Macros to View BoQ information |
