|
| 1 | Taking down tar felt with cement plaster from roof surfaces and lowering and removing the same to a distance exc. 50m and n. exc. 100m incl removal of finishes up to mother slab complete all as specified and as directed . |
| 2 | M&L for 10mm thick rendering cement mortar (1:4) mixed with WPC over roof surfaces finished even and smooth without using extra cement including making grooves complete all as specified and as directed. |
| 3 | Supply only liquid water proofing compound conforming to IS: 2645 - 1975 specification complete all as specified and as directed |
| 4 | M&L 25 mm thick PCC 1:2:4 type B0 (Using 12.5 mm graded stone aggregate laid on RCC slab as base layer for roof treatment finishing smooth top layer to receive chemicals of roof treatment complete all as specified and as directed. |
| 5 | M& L for bituminous primer @ 0.50 KG/Sqm over the cement plaster incl preparation of surfaces as per manufacturers instruction complete all as specified and as directed by the Engr-in-Charge. |
| 6 | M & L APP based polymeric membrane minimum weighing 3kg/Sqm and minimum 3mm thick reinforced with polyster non wove fabric (wt. not less than 150 gms/Sqm) land on primed surface by forced application complete all as specified and as directed by Engr in Charge. |
| 7 | M & L for finishing the Bituminous surface with aluminium paint @0.15 Ltr/Sqm as per manufactures specifications and under strict supervision of manufactuer's technical representative complete in all respects as directed by Engr-in-Charge |
| 8 | Roughening surfaces of old concrete floor by picking, sweeping clean and washing down with water to remove dust, etc complete all as specified and directed |
| 9 | M&L for machine cut kota stone slab flooring 20-25mm thick over cement screed base laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing complete with M & L for screed bed or bedding layer of mortar 15 mm thick in cement mortar 1:6 for laying floor finishes |
| 10 | M & L for Kota stone slab 20-25mm thick in riser of steps, skirting, dado and pillar laid over cement screed and jointed with ditto as per item 6 above |
| 11 | Demolition of brick masonary work, built in cement mortar or cement lime mortar including all quions, arches, pillars, etc. but excluding precast concrete articles etc. complete all as specified and directed. |
| 12 | M&L for brickwork with old size fly ash sub class 'B' bricks, straight or curved on plan exceeding 6m mean radius built in cement mortar 1:6 complete all as specified and directed. |
| 13 | Taking down cement plaster on wall & ceiling of any description including racking out joints, hacking for key and scrubbing down with water etc complete all as specified and directed. |
| 14 | M&L for 20 mm thick plaster of cement mortar (1:4) rendering on fair faces of brick work in two layers (10mm & 10mm) mixed with water proofing compound in top layer 200 ml per beg of cement or as per manufacturer's instructions finishing the surface fair and even without using extra cement complete all as specified and as directed. (Note: Water proofing compound shall be measured and paid seperately under relevant item of schedule 'A'). |
| 15 | Supply only liquid water proofing compound conforming to IS: 2645 - 1975 specification complete all as specified and as directed |
| 16 | M&L 15mm thick rendering in cement mortar 1:6 on other than fair face of brick work or concrete surface finished fair and even (without using extra cement) complete all as specified and directed. |
| 17 | M & L for Plastered surfaces of walls and Finishing walls with Acrylic Smooth exterior paint of required shade : New work (Two or more coat applied @ 1.67 ltr/10 sqm over and including priming coat of exterior primer applied @ 2.20 kg/10 sqm) |
| 18 | M&L for prepartion of newly plastered surfaces of walls and applying two coats of oil bound distemper over a coat of primer to wall surface complete all as specified and directed. |
| 19 | M&L for complete removal of existing treatment of old plastered surfaces of walls and applying two coats of oil bound distemper over a coat of primer all as specified and directed. |
| 20 | M&L for rendering 5mm thick plastering in CM (1:3) on ceiling, soffits of slabs, chajjas, columns and beams etc and finished the plastered surface even and smooth without using extra cement. |
| 21 | M&L preparing newly plastered or unplastered surface of ceiling and applying three coats of white washing complete all as specified and directed. |
| 22 | M&L for preparartion of old surfaces applying two coat of white washing on ceiling surface complete all as specified and directed. |
| 23 | Taking down chowkat with shutter exc 1.5 sqm and n. exc. 4.00sqm each and removing from site. |
| 24 | Taking down chowkat with shutter n exc 1.5 sqm removing from site complete all as specified and directed |
| 25 | S&F for pressed steel frames for doors with one or more rebates including necessary lugs, hinges, lock strike plate, etc., complete, as specified, size of frame 105 x60 mm |
| 26 | S&F 30mm flush shutter, solid core construction, with block board core and plywood face panel, commercial type on both side etc complete all as specified and directed. |
| 27 | M & L for providing plain cement concrete type C-1, 1:3:6, (using 20 mm graded stone aggregate), as in copings, bed block for filing hollow space of steel chowkhats, fixing of hold fast, kneelers, apex stones, bed plates, water troughs and the like including weathering, slightly rounded or chamfered angles & throating as directed including necessary form work as required complete all as specified and directed. |
| 28 | S&F aluminium anodised barrel tower bolts of extruded section 200 mm long all as specified and as directed. |
| 29 | S&F aluminium handles 150mm size cast type anodised complete all as Specified. |
| 30 | S&F for sliding door bolt of 300mm long plate Aluminium alloy, anodised, sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast-aluminium alloy and fixed complete all as Specified. |
| 31 | M&L for preparation of new wooden surface of any description over 10cm width or girth and applying two coats of synthetic enamel paint over a coat of primer complete all as Specified. |
| 32 | S&F in repair of factory made steel windows with side hung shutters openable type including friction/projected type hinges steel handle and peg stay complete without glazing bars fixed to existiog opening and making to match as per existing surfaces. |
| 33 | S&F in repair of factory made steel windows with side hung shutters openable type including friction/box type hinges steel handle and peg stay complete with glazing bars fixed to existiog opening and making good to match as per existing surfaces including taking out old/unserviceable steel windows. |
| 34 | S&F Framed work such as grills,gratings, etc with ends of bars shouldered and/or riveted, or forged into spikes; framedguard bars; barred iron doors; ladders; framed balusters; walkways; railings; framework of water tanks and similar work conforming to Fe.290.Gde-E-165 |
| 35 | Dismantling water tanks and removing from site of capacity 500 ltrs. |
| 36 | S & F 1000 ltrs rotational moulded polyethelene water storage tanks (cyclindrical vertical with closed top) incl necessary fittings for connection with pipes securing access covers etc as specified and as directed. |
| 37 | S&F in repair 20 mm dia PVC ball cock (PVC float valves) complete high pressure with epoxy coated aluminum rod and high density plastic ball screwed for iron pipe and fixed as required to use reducer and check nut. |
| 38 | Taking up or down GI 20mm steel tubing and connections incl cleaning for refixing or removal to store. |
| 39 | S&F 20mm bore pipe medium grade galvanised iron water tube with all fittings laid in floors fixed to wall etc complete all as specified and as directed. |
| 40 | S&F in repairs stop valves fancy type cast copper alloy, chromium plated with long shank and cup (concealed type) for 15mm bore pipe, screwed both ends including necessary fittings such as sockets for pipe or for union all complete as specified and as directed. |
| 41 | S&F in repairs Bib taps long body fancy type cast copper alloy, chromium plated for 15mm bore pipe, screwed for iron pipes or for brass ferrule all complete as specified and as dierected. |
| 42 | Taking down CI/PVC/AC soil pipe with fittings from wall, treches of any description including fittings. |
| 43 | S & F 110mm PVC (SWR) pipes single socketed in any length with rubber ring joints fixed to walls./laid in floor complete all as specifeid |
| 44 | Dismantling wall and ceiling board (fibre pulp, insulation etc) or insulation boards any thickness including cover fillets |
| 45 | S & F for Anodised aliminium snap grid frame work for false ceiling confirming IS:733, 737 & IS:1285 ; all as specified and as directed. |
| 46 | S&F 4mm thick (E-Boards) Pre painted Non asbestos fibre cement building boards fixed or laid/ inserted to timber/GI/Aluminium framework with screws in ceiling complete all as specified and as dirceted. |
| 47 | M&L for applying two coats of synthetic enamel paint over a coat of red oxide primer including preparation of new steel surface over 10cm width or girth |
| 48 | S & F of 4mm thick figured glass pin headed type n.exc 0.5sqm each fixed to steel frame complete |
| 49 | S&F Galvanised MS wire cloth 0.56 mm nominal dia of wire 7 avg width of aperture 1.18mm & fixed with tinned tacks or galvanised wire staples complete all as spd & directed. |
| 50 | Dismantling of cement concrete of any size, position and any description complete all as specified and as directed. Please Enable Macros to View BoQ information |
| 51 | Dismantling of cement concrete of any size, position and any description complete all as specified and as directed. Please Enable Macros to View BoQ information |
