|
| 1 | Demolition of reinforced cement concrete of any description and in any position such as precast manhole cover or cover slabs of septic tank etc (reinforcement cut as required to facilitate demolition) |
| 2 | M&L for precast RCC 1: 1.5 :3 (Nominal Mix) type B-1 using 20mm graded aggregate set in cement mortar 1:4 as in kitchen slab including necessary formwork complete all as specified and as directed |
| 3 | M&L for mild steel TMT bars 6mm to 8mm dia cut to length , bent to shape required, including cranking , bending and binding with MS wire , not less than 0.9 mm dia or securing with clip. |
| 4 | Demolition of stone slab of any description or thickness as in floors, apron etc laid, bedded and pointed in any mortar complete all as directed and directed. |
| 5 | M & L for 16 to 18 mm thick granite (of any type) work (table rubbed and polished) in steps, Jambs, pillars, window cills, cooking platforms,corner shelf,Flat shelf and like in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite and including 15 mm thick cement screed bed (1:4) including rounded the exposed surfaces of granite complete all as specified. |
| 6 | All as per item no 15 but as in skirting ( 12 to 15 mm thick) laid over 10 mm thick backing coat in cement mortar (1:3) complete all as specified and as directed. |
| 7 | Dismantling water tanks and removing from site of capacity exc 250 Ltr & n.exc 500 ltrs. |
| 8 | S & F 500 ltrs rotational moulded LLDPE (double layer) polyethelene water storage tanks (cyclindrical vertical with closed top) incl necessary fittings for connection with pipes securing access covers etc as specified and as directed. |
| 9 | Disconnecting existing tanks of capacity exc 250 Litres and n. exc 500 Litres, setting aside (or lowering if required) for repairs, cleaning, etc. and hoisting if required reconnecting and re-fixing in same position after cleaning and removing all scale and dirt, etc, from tanks and from mouths of circulating pipes, etc complete all as specified and directed. |
| 10 | M & L for Plain Cement Concrete Type B1 1:2:4 (using 20 mm graded stone aggregate) in water tank platforms,filling and mass concrete. |
| 11 | S&F in repair 20 mm dia PVC ball cock (PVC float valves) complete high pressure with epoxy coated aluminum rod and high density plastic ball screwed for iron pipe and fixed as required to use reducer and check nut. |
| 12 | Taking up or down GI 15mm bore pipe and connection including cleaning for refixing or removal to store as directed. |
| 13 | Taking up or down GI 20mm steel tubing and connections incl cleaning for refixing or removal to store. |
| 14 | S&F 15mm bore pipe medium grade galvanised iron water tube with all fittings laid in floors fixed to wall etc complete all as specified and as directed. |
| 15 | S&F 20mm bore pipe medium grade galvanised iron water tube with all fittings laid in floors fixed to wall etc complete all as specified and as directed. |
| 16 | Taking down cement plaster on wall & ceiling of any description including racking out joints, hacking for key and scrubbing down with water etc complete all as specified and directed. |
| 17 | M&L for 20 mm thick plaster of cement mortar (1:4) rendering on fair faces of brick work in two layers (10mm & 10mm) mixed with water proofing compound in top layer 200 ml per bag of cement or all as per manufacturer's instructions finishing the surface fair and even without using extra cement complete all as specified and as directed. (Note: Water proofing compound shall be measured and paid seperately under relevant item of schedule 'A'). |
| 18 | Supply only liquid water proofing compound conforming to IS: 2645 - 1975 specification complete all as specified and as directed |
| 19 | M & L for complete removal of existing treatment and finishing the walls with Acrylic smooth exterior paint of required shade : New work (Two or more coats applied @1.67 Ltr/10 Sqm over and including 2mm thick wall care putty in two layer (each layer of 1mm thick) etc complete all as specified and directed by Engr-in-Charge |
| 20 | M & L for preparing new Plastered surfaces of walls and finishing the walls with Acrylic smooth exterior paint of required shade : New work (Two or more coats applied @1.67 Ltr/10 Sqm over and including 2mm thick wall care putty in two layer (each layer of 1mm thick) etc complete all as specified and directed by Engr-in-Charge |
| 21 | M&L 15mm thick rendering in cement mortar 1:6 on other than fair face of brick work or concrete surface finished fair and even (without using extra cement) complete all as specified and directed. |
| 22 | M&L for prepartion of newly plastered surfaces of walls and applying two coats of average thickness oil bound distemper over a coat of primer after applying 2 coats of cement based wall putty 1 mm average thickness each to wall surface complete all as specified and directed. |
| 23 | M&L for complete removal of existing treatment of old plastered surfaces of walls and applying two coats of oil bound distemper over a coat of primer after applying 2 coat of cement based wall care putty 1 mm average thickness each including complete removal of existing treatment all as specified and directed. |
| 24 | M&L for rendering 5mm thick plastering in CM (1:3) on ceiling, soffits of slabs, chajjas, columns and beams etc and finished the plastered surface even and smooth without using extra cement. |
| 25 | M&L preparing newly plastered or unplastered surface of ceiling and applying three coats of white washing complete all as specified and directed. |
| 26 | M&L for preparartion of old surfaces applying two coat of white washing on ceiling surface complete all as specified and directed. |
| 27 | M&L preparing newly plastered or unplastered surface of wall and applying three coats of white wash complete all as specified and directed. |
| 28 | Demolition of brick work built in cement mortar of any description. |
| 29 | M&L brickwork with sub class B bricks straight or curved on plan exc 6mtr mean radius built in cement mortar 1:6 by using old size bricks complete. |
| 30 | Supply and fixed in repairs sinks without drainage board made of stainless steel 1mm thick sheet plugs, washers and waste pipe, including a pair of cantilever brackets embedded in wall with suitable size of PCC (1:3:6) type C-1 blocks and connecting union to pipe of overall size 495mm x 420mm bowl size 410mm x 330mm x 160mm all complete as specified and as directed. |
| 31 | S&F in repair Vitreous China wash basin Pedestal pattern, white, flat back size 550x400 mm including cutting for and pinning in ends of brackets or erecting stand but exclusive of fixing of supply and waste pipeincluding brackets, complete all as specified and as directed by Engr-in-Charge. |
| 32 | S&F in repair 15 mm fancy type pillar taps, cast copper alloy with capston heads, chromium plated, screwed down high pressure, with or without lettered hot or cold with long screwed shanks and fly-nuts, screwed for iron pipe 15mm bore. |
| 33 | S&F in repairs 600mm x 450 mm bevelled edge mirror of selected quality, mounted on 6 mm thick AC plain building board and fixed to wall on wooden plugs with chromium plated brass screws and cup washers all complete as specified and as directed. |
| 34 | S&F of in repair vitreous china squatting pan \\"Orissa\\" pattern size 580x440mm white with integral foot rests(excluding flushing cistern and flush pipe) with 'P' or 'S\\" trap from or back inlet etc including connection to trap and flushing pipe and provision of lime concrete bedding complete all as specified and as directed |
| 35 | S&F in repair vitreous china wash down water closet pan (pedestal pattern), white including connection trap and to flushing pipe, anti-syphnoge pipe etc complete including complete |
| 36 | S&F in repair PVC seat cover for pedestal pan, white closed pattern with flat bottom and cover and mild steel chromium plated or aluminiumised hanging device complete all as directed. |
| 37 | S&F in repair CP health faucet (ABS body) mild steel chromium plated suitable for 15 mm dia pipe with 1.25 m long flexible tube and ABS wall hook in cluding making connections and fixed in position complete in all respect and specified |
| 38 | S&F in repair 10 ltr capacity dual type PVC flushing cistern low level white colour incl PVC connection PVC flush pipe of reqd length complete all as specified and directed. |
| 39 | S&F in repairs Bib taps long body fancy type cast copper alloy, chromium plated for 15mm bore pipe, screwed for iron pipes or for brass ferrule all complete as specified and as dierected. |
| 40 | S&F in repair 15 mm bore angle cock CP with flage complete all as specified and direcrted |
| 41 | S&F in repairs stop valves fancy type cast copper alloy, chromium plated with long shank and cup (concealed type) for 15mm bore pipe, screwed both ends including necessary fittings such as sockets for pipe or for union all complete as specified and as directed. |
| 42 | S&F in repairs 20mm bore Gun metal globe or gate valves, with iron wheel head, screwed both ends for iron pipe and fixed all complete as specified and as directed |
| 43 | S & F in repair 15mm bore PVC Connection with PTMT nut of length 600 mm complete all as specified and directed |
| 44 | S&F in repair for brass chromium plated tubular towel rail, 20mm dia, D type, 60cm long between flanges. |
| 45 | S&F in repair sheet glass shelf assembly consisting of 5.5mm thick sheet glass shelf 12 cm wide with chomium plated bracket guard and railing 60 cm long. |
| 46 | S&F in repair Stainless Steel soap dish of approximate size of 160x160x90mm fixed to the wall with SS screws complete all as specified and directed. |
| 47 | S&F in repair cp towel ring complete all as specified and directed. |
| 48 | S&F in repair 1.00 mm thick stainless steel plate rack of size 31\\"x30\\"x10\\" complete all as specified and directed. |
| 49 | S&F in repair 75 mm dia swivel shower of CP with shower arm 150 mm size for fixing with 15 mm bore GI pipe complete all as specified and as directed |
| 50 | S& F in repair for 75 mm dia PVC (SWR) floor trap, plain with grating including jointing with solvent cement complete all as specified and as directed. |
| 51 | Taking down CI/PVC/AC soil pipe with fittings from wall, treches of any description including fittings. |
| 52 | S & F 110mm PVC (SWR) pipes single socketed in any length with rubber ring joints fixed to walls. |
| 53 | S&F 110mm dia PVC bends of any radius with acess door. |
| 54 | S&F 110mm dia PVC (SWR) branch piece single (single 'Y'/T) equal or unequal with acess door. |
| 55 | S&F 110mm dia PVC SWR vent cowl |
| 56 | S&F 75 mm bore PVC (SWR) pipes single socketed in any length with rubber ring joints fixed to walls. |
| 57 | S&F 75 mm bore PVC (SWR) bends of any radius. |
| 58 | S&F 75 mm bore PVC (SWR) junction single (Single `T') equal or unequal with access door. |
| 59 | Taking down chowkat with shutter exc 1.5 sqm and n. exc. 4.00sqm each and removing from site. |
| 60 | S&F for pressed steel frames for doors with one or more rebates including necessary lugs, hinges, lock strike plate, etc., complete, as specified, size of frame 125 x60 mm |
| 61 | S&F for pressed steel frames for doors with one or more rebates including necessary lugs, hinges, lock strike plate, etc., complete, as specified, size of frame 105 x60 mm |
| 62 | M & L for providing plain cement concrete type C-1, 1:3:6, (using 20 mm graded stone aggregate), as in copings, bed block for filing hollow space of steel chowkhats, fixing of hold fast, kneelers, apex stones, bed plates, water troughs and the like including weathering, slightly rounded or chamfered angles & throating as directed including necessary form work as required complete all as specified and directed. |
| 63 | S&F 30mm flush shutter, solid core construction, with block board core and plywood face panel, commercial type on both side etc complete all as specified and directed. |
| 64 | S&F of 30mm thick factory made Skeleton Shutter partly glazed and partly panelled i.e. upper panel will be wire mesh fitted externally in the clear space & lower panel will be plain colour PVC sheet 5mm thick complete all as specified and as directed. |
| 65 | S& F of 140 mm Floor door stopper of aluminium alloy body and tongue, anodised, with hard drawn steel spring, fixed in floor |
| 66 | S&F 100 mm butt hinges stainless steel complete all as specified and directed. |
| 67 | S&F aluminium anodised barrel tower bolts of extruded section 200 mm long all as specified and as directed. |
| 68 | S&F aluminium handles 150mm size cast type anodised complete all as Specified. |
| 69 | S&F for sliding door bolt of 300mm long plate Aluminium alloy, anodised, sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast-aluminium alloy and fixed complete all as Specified. |
| 70 | M&L for preparation of new wooden surface of any description over 10cm width or girth and applying two coats of synthetic enamel paint over a coat of primer complete all as Specified. |
| 71 | Taking down chowkat with shutter n exc 1.5 sqm removing from site complete all as specified and directed |
| 72 | S&F Solid PVC door frame of size 50x47mm made out of 5mm thick plain colour PVC sheet reinforced with MS square tube, supplied and fixed incl fixing of hold fast as per specification and drawing complete all as Specified. |
| 73 | S&F Factory Made Solid PVC panel Door Shutter, 28 to 30mm thick (stiles), with 2, 4, or 6 raised panel design with 4mm thick Moulded PVC Sheet on the front face & 2mm plain colour PVC sheet on back face, supplying & fixing in frame at site as per specification with Wood free EPS complete all as Specified. |
| 74 | S&F 150 mm long Aluminium anodised barrel tower bolts complete all as specified and directed. |
| 75 | S&Fin repair 25mm dia curtain rod, chromium plated with fixing brackets etc. complete as specified and as directed. |
| 76 | M & L for providing & fixing factory made solid PVC cup board frame of size 50mm x 47mm with a wall thickness of 5mm made out of extruded 5 mm thick prelam/plain colour PVC sheet reinforce with 19mm x 19mm MS square tube of 19 gauge thickness throughout the frame and metre cut at two corners and jointed with 2 nos of 150mm long brackets of 15mm x 15mm MS square tubes.The door frame shall be fixed to the wall using 100mm long MS screws through the frame by using PVC fasteners. A minium 4 nos of screws to be provided for each vertical memberand minium 2 nos of screws to be provided to the horizontal mmember etc.complete all as specified and dir by Engineer in charge incl dismantling of existing of cupboard. |
| 77 | M & L for providing & fixing factory made solid PVC cup board shutter (Flush type) of 24 mm thick made from co-extruded 3 layer regid PVC foam sheet (single extruded) with density not less than 600kg/cbm outer layer (.8-1mm) thick should be of rigid PVC with density of not less than 1400kg/cbm manufactured byan ISO 9001-2015 certfied company. Door should be water proof, turmite proof, fire retardant and having good screw holding capacity complete all as specified incl taking down the ext cupboard. |
| 78 | M&L in repair for providing and fixing factory made PVC shelf/partitation of required size consisting of 20mm thick solid PVC sandwich with 1mm thick plain PVC sheet on both sides suitably fixed in complete all as specified and directed |
| 79 | S & F 75mm long Aluminium anodised, barrel tower bolts of extruded section and fixed. |
| 80 | S & F in repair stainless steel wire cloth 0.36 nominal dia wire & average width of aperature 1.40 mm fixed with stainless steel wire staples complete all as specified and directed |
| 81 | S&F Powder coated aluminium window sliding type three track (2 glazed & one gauze shutter ) aluminium sections weighing not less than 1.67kg/m for frame and 0.55 kg/m for shutter including necessary jointing cleats, glazing cleats, rubber packing , screws, handle, locking arrangement and 4 mm thick plain/tinted glass and aluminium mosquito proof gauge including taking down of old existing steel window and making good disturbed surface of wall complete all as specified and as directed. |
| 82 | S&F Powder coated aluminium louvered ventilators of size n exc 0.50 Sqm area with glass louvers, without sash bars of aluminium sections weighing not less than 0.605kg/m for frame of size 40x20x2mm including necessary jointing cleats, glazing cleats, rubber packing , anodised aluminium snap beading,screws, anodised aluminium fittings and 5.5mm thick tinted glass fixed in panels with suitable locking arrangements including taking down of old existing steel ventilator and making good disturbed surface of wall complete all as specified and as directed. |
| 83 | S&F Framed work such as grills,gratings, etc with ends of bars shouldered and/or riveted, or forged into spikes; framedguard bars; barred iron doors; ladders; framed balusters; walkways; railings; framework of water tanks and similar work conforming to Fe.290.Gde-E-165 Dismentling not taken |
| 84 | Dismantling of cement concrete of any size, position and any description complete all as specified and as directed. Please Enable Macros to View BoQ information |
| 85 | Dismantling of cement concrete of any size, position and any description complete all as specified and as directed. Please Enable Macros to View BoQ information |
