|
| 1 | Dismantling of Plain or corrugated steel sheeting, any gauge, thickness, including Nainital or similar pattern roof coverings complete all as specified and directed by Engineer-in-Charge. |
| 2 | Supply & Fixing Pre- painted galvalume aluminum zinc coating GI based corrugated steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws complete all as specified and as directed by Engineer-in-Charge. |
| 3 | Supply & Fixing Pre-painted galvalume aluminum zinc coating GI based Plain steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws complete all as specified and as directed by Engineer-in-Charge. |
| 4 | Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing) with and including removing rubbish material from building and thrown in low lying empty area complete all as specified and as directed by Engineer-in-charge. |
| 5 | Material and Labour for Virified Ceramic tiles light shade 10 mm thick (square/rectangular) polished, (shade as approved by Engineer-in-charge ) , area of each tiles not exceeding 0.36 sqm , in floors etc. set and jointed in neat cement slurry @ 3.00Kg per Sqm and pointed in white or coloured/ shade cement to match the colour / shade of tiles , laid over with and including 15mm thick screed bed in cement mortar 1:4 complete all as specified and directed by Engineer-in-Charge. |
| 6 | Material & Labour for Non skid ceramic coloured joint free tiles , thickness 7mm to 8mm thick (square/ rectangular), colour as approved by Engineer-in-charge area of each tiles exceeding 0.18 Sqm but not exceeding 0.38 Sqm in floor etc set and jointed in neat cement slurry @ 3.00Kg per Sqm and pointed in white or coloured cement to match the colour / shade of tiles , laid over with and including 15mm thick screed bed in cement mortar 1:4 complete all as specified and directed by Engineer-in-Charge. |
| 7 | Material & Labour for for coloured Non - skid Ceramic tiles 7 to 8 mm thick (square/ rectangular) area of each tile exceeding 0.11 sqm but not exceeding 0.18 sqm, as in vertical surfaces set and jointed in neat cement slurry @ 3.00Kg per Sqm and pointed in white or coloured cement to match the colour / shade of tiles , laid over with and including 10mm thick rendering in cement mortar 1:4 complete all as specified and directed by Engineer-in-Charge. |
| 8 | Material & Labour for Glazed ceramic coloured tiles size 300mm x 200mm / 450mm x 300mm x 7mm thick as in verticle surface , set and jointed in neat cement slurry @ 3.00Kg per Sqm and pointed in white or coloured cement to match the colour / shade of tiles , laid over with and including 10mm thick rendering in cement mortar 1:4 complete all as specified and directed by Engineer-in-Charge. |
| 9 | Dismantling of Brickwork or stone/ boulder masonry, built in cement mortar or cement lime mortar including all quoins, arches, pillars, etc, but excluding ashlar facings, dressed stonework and precast concrete articles complete all as specified and directed by Engineer-in-Charge. |
| 10 | Material & Labour for Brickwork with sub class ‘B’ burnt clay old size bricks, straight or curved on plan exc 6m mean radius built in cement mortar 1:6 complete all as specified and as directed by Engineer-in-Charge. |
| 11 | Dismantling of Wall and ceiling boards (fibre, pulp, insulation, etc.) or insulation boards/slabs/ blankets, any thickness, including cover fillets complete all as specified and directed by Engineer-in-Charge. |
| 12 | Dismantling timber scantlings (unframed) in fillets, rails, posts, rafters, purlins, etc. under 40 sq. cm in section In framed work complete all as specified and directed by Engineer-in-Charge. |
| 13 | Material & Labour for 2nd class soft wood Plain fillets square, rectangular or triangular in section, clean sawn, secured with nails or brads sizes exc 13 sqcm but n exc 25 sqcm in sectional area complete all as specified and as directed by Engineer-in-Charge. |
| 14 | Material & Labour 6mm thick Veneered decorative plywood, grade 1 (with BWR resin) with decorative face veneers on both faces; fixed with screws to timber frame work on ceiling complete all as specified and directed by Engineer-in-Charge. |
| 15 | Material & Labour 6mm thick Veneered decorative plywood, grade 1 (with BWR resin) with decorative face veneers on both faces; fixed with screws to timber frame work on Wall panalling complete all as specified and directed by Engineer-in-Charge. |
| 16 | Material & Labour for 2nd class soft wood Plain fillets square, rectangular or triangular in section, clean sawn, secured with nails or brads sizes exc 6 sqcm but n exc 13 sqcm in sectional area complete all as specified and as directed by Engineer-in-Charge. |
| 17 | Material & Labour for 2nd class soft wood Plain fillets square, rectangular or triangular in section, clean sawn, secured with nails or brads sizes n exc 03 sqcm in sectional area complete all as specified and as directed by Engineer-in-Charge. |
| 18 | Dismantling Stone slabs and tiles of any description or thickness in floors, aprons etc. laid, bedded and pointed in any mortor complete all as specified and directed by Engineer-in-Charge. |
| 19 | Demolition of cement concrete reinforced of any discription and in any position, including reinforcement cut as required to facilitate and including removing rubbish material from site and thrown in low lying empty area (as per direcction of AGE/JE) complete all as specified and as directed by Engineer-in-charge.The weight of scrap iron for schedule of credit shall be ascertain by BOO as ordered by GE.The copy of BOO duly countersinged by GE shall be enclosed with final Bill. |
| 20 | Material and labour Brickwork with sub class 'B' old size burnt clay bricks, straight or curved on plan to any radius in half brick thick walls built in cement mortar 1:4 complete all as specified and as directed by Engineer-in-charge. |
| 21 | Material & Labour for reinforced cement concrete nominal mix (1:2:4) type B1 (using 20mm graded stone aggregate) as in Slabs supported on walls, beams and columns in floors, roofs, landings, balconies, canopies, deck slabs and in shelves and the like complete all as specified and directed by Engineer-in-Charge. |
| 22 | Material & Labour for Formwork to soffits of suspended slabs such as roof slabs, floor slabs, landings and similar work; not exceeding 200mm thick (Horizontal or sloping) on rough finished flat surface of concrete complete all as specified and directed by Engineer-in-Charge. |
| 23 | Material & Labour for Mild steel TMT bars 10mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips complete all as specified and as directed by Engineer-in-Charge. |
| 24 | Material & Labour for 20mm thick Granite (of any type) work (table rubbed and polished) in steps, jambs, pillars, window- cills, cooking platforms and like in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite over and including 20mm thick screed bed or bedding of cement mortar (1:4) complete all as specified and directed by Engineer-in-Charge. |
| 25 | Material and Labour for Providing and laying 80mm thick factory made chamfered edge cement concrete paver block of M-30 grade with approved colour, design & pattern as in footpath, parks, lawns, drive ways or light traffic parking etc., of required strength, thickness & size/ shape, made by table vibratory method using PU mould, laid in required colour & pattern over and including 50mm thick compacted bed of coarse sand, compacting and proper embedding/ laying of inter locking paver blocks into the sand bedding layer through vibratory compaction by using plate vibrator, filling the joints with fine sand and cutting of paver block as per required size and pattern, finishing and sweeping extra sand; complete. complete all as specified and directed by Engineer-in-Charge. |
| 26 | Material and Labour for Machine cut kota stone slab flooring 20-25mm thick over cement screed base laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing complete over and including 20mm thick screed bed of cement mortar (1:4) complete all as specified and directed by Engineer-in-Charge. |
| 27 | Material and Labour for Kota stone slab 20-25mm thick in riser of steps, skirting, dado and pillar laid over cement screed and jointed over and including 10mm thick rendering of cement mortar (1:4) complete all as specified and directed by Engineer-in-Charge. |
| 28 | Material and Labour for Chequered cement concrete tiles 20cm x 20cm x 25mm thick, set, jointed and pointed in neat cement slurry in floors with white cement and pigment over with and including 15mm thick screed bed of cement mortar (1:4) complete all as specified and directed by Engineer-in-Charge. |
| 29 | Demolition of Concrete (unreinforced) of any description and in any position not otherwise specifically provided for and including removing rubbish material from site and thrown in low lying empty area (as per direcction of AGE/JE) complete all as specified and as directed by Engineer-in-charge. |
| 30 | Material and Labour for Hardcore of broken stone or boulders of gauge n exc. 63 mm, deposited, spread and levelled in layers n exc. 15 cm thick, watered and rammed to a true surfacecomplete all as specified and directed by Engineer-in-Charge. |
| 31 | Material and Labour for 50mm thick cement concrete (1:3:6) type C2 (using 40mm graded stone aggregate) as in plinth protection complete all as specified and directed by Engineer-in-Charge. |
| 32 | Taking down cement or cement lime plaster from brick wall or concrete surfaces etc including racking out joints, hacking for key & scrubbing down with water etc including removing rubbish material from site and thrown in low lying empty area (as per direcction of AGE/JE) complete all as specified and as directed by Engineer-in-charge. |
| 33 | Material and Labour for Rendering 10mm thick on fair faces of brick work or concrete surfaces with cement mortar (1:4) and finished even and smooth (without using extra cement) complete all as specified and as directed byEngineer-in-Charge. |
| 34 | Taking down chowkhats or frames with shutters of PVC door ,wooden door shutter, wooden window shutter , Mild steel window and Mild steel ventilators (without taking off shutters from the frames) area exceeding 1.50 sqm but not exceeding 4.00 Sqm each complete all as specified and as directed by Engineer-in- charge. |
| 35 | Supply & Fixing Anodised aluminium frame for doors, windows, ventilators with one or more rebates including joining cleat for fixing etc. with Powder Coating to section (minimum thickness of powder coating 50 micron) complete all as specified and directed by Engineer-in-Charge.Note: 1. During the weighing of aluminium section the weight of powder coating 50 micron shall not be considered. The payment shall be made only on the actual weight of aluminium section. 2. The rate of 50 micron powder coating is included in this item hence contractor shall quote his rate accordingly.Nothing shall be paid extra on this account.3. if the aluminium section provided at site with thickness of powder coating more than 50 micron by contractor nothing shall be paid extra. |
| 36 | Supply & Fixing Anodised aluminium door shutters, aluminium section weighing 0.55 kg/ m including necessary joining cleats, glazing clips, ruber neoprene packing, handles 2 Nos in each door, hinges, anodised aluminum snap beading screws etc. including powder coating of any colour (Thickness or powder coating not less than 50 micron). complete all as specified. complete all as specified and directed by Engineer-in-Charge.Note : 1. The rate of Glass is not included in this item and shall be measured and paid under appropriate items of Schedule of BoQ3. The rate of cleats, glazing clips,rubber packing, anodised aluminium snap beading, screws, etc. is included in this item and nothing shall be paid extra on this account.4. The rate of anodised aluminium fittings such as , hinges , handles , tower bolts, stopers, sliding bolt is not included in this item . The measurment and payment of these items shall be made under appropriate items of Schedule'A' BoQ. |
| 37 | Supply & Fixing Anodised aluminium window and ventilator shutters, side hung type without sash bars, aluminium sections weighing 0.55 kg/m including necessary joining cleats, glazing clips, rubber packing, anodised aluminium snap beading, screws, anodised aluminium fittings such as peg stays 150mm long (1 no.). hinges type B-21 100mm long (2 no.) suitable handle (1 no.) complete all as specified including powder coating of any colour (Thickness or powder coating not less than 50 micron). complete all as specified. Complete all as specified and directed by Engineer-in-Charge.Note : 1. The rate of Glass is not included in this item and shall be measured and paid under appropriate items of Schedule of BoQ3. The rate of cleats, glazing clips,rubber packing, anodised aluminium snap beading, screws, etc. is included in this item and nothing shall be paid extra on this account.4. The rate of anodised aluminium fittings such as , hinges , handles , tower bolts, stopers, sliding bolt is not included in this item . The measurment and payment of these items shall be made under appropriate items of Schedule'A' BoQ. |
| 38 | Supply & Fixing Mild steel work as in Framed work such as grills, gratings, etc.. with ends of bars shouldered and/or riveted, or forged into spikes; framed guard bars; barred iron doors; ladders; framed balusters; walk ways; railings; framework of water tanks and similar work conforming to Fe.290.Gde-E-165 complete all as specified and as directed by Engineer-in-Charge. |
| 39 | Material and Labour for preparation of newly steel Surfaces of any description, over 10cm in width or girth,not otherwise described and applying two coats of synthetic enamel paint over with and including one coat of red oxide zinc chrome primer complete all as specified and directed by Engineer-in-Charge. |
| 40 | Taking down chowkhats or frames with shutters of PVC door , wooden door shutter, wooden window shutter , Mild steel window and Mild steel ventilators (without taking off shutters from the frames) area not exceeding 1.50 sqm each complete all as specified and as directed by Engineer-in- charge. |
| 41 | Supply & Fixing Steel ventilator with top hung shutter including hinges, steel peg stay, complete complete all as specified and directed by Engineer-in-Charge. |
| 42 | Supply & Fixing 4mm thick Sheet glass, ordinary quality and glazing with oil putty in square exc 0.5 sq. m in each pane complete all as specified and as directed by Engineer-In-charge |
| 43 | Supply & Fixing 4.8mm thick Sheet glass, ordinary quality and glazing with oil putty in square exc 0.5 sq. m in each pane complete all as specified and as directed by Engineer-In-charge |
| 44 | Supply & Fixing 5.3mm thick Sheet glass, ordinary quality and glazing with oil putty in square exc 0.5 sq. m in each pane complete all as specified and as directed by Engineer-In-charge |
| 45 | Supply & Fixing Galvanised mild steel wire cloth, 0.63mm nominal dia of wire and average width of aperture 1.40mm and fixed with tinned tacks, or galvanised wire staples complete all as specified and as directed by Engineer-In-charge |
| 46 | Supply & Fixing 5mm thick plain colour PVC sheet in strips & channel feathered at the edges for fixing on Solid PVC Wall Lining, Insulated PVC Wall Lining, and Solid PVC Partitions inclusive of Solvent Cement and fixing at site complete all as specified and as directed by Engineer-In-charge Please Enable Macros to View BoQ information |
| 47 | Supply & Fixing 5mm thick plain colour PVC sheet in strips & channel feathered at the edges for fixing on Solid PVC Wall Lining, Insulated PVC Wall Lining, and Solid PVC Partitions inclusive of Solvent Cement and fixing at site complete all as specified and as directed by Engineer-In-charge Please Enable Macros to View BoQ information |
