|
| 1 | Dismantling timber frame, framed work as in fillets, rails, posts, purlins, etc under 40 sqcm in section. complete, all as specified & directed by Engineer-in-charge. |
| 2 | M&L for second class hard wood in scantling, clean sawn timber framed and fixed work complete, all as specified & directed by Engineer-in-charge. |
| 3 | Dismantling timber framed work as in fillets, rails, posts, rafters, purlins, etc. under 40 sq. cm in section, complete all as specified and as directed by Engr-in-Charge. |
| 4 | M&L for second class wrought hard wood plain fillets, square, rectangular or triangular in section, sectional area 13 sqcm but n exc 25 sqcm, secure with screws,complete, all as specified & directed by Engineer-in-charge. |
| 5 | Plugging to walls in repair complete for wood fillets, grounds moulding, etc. on cement concrete walls, at distance n. exc 1 mtr complete all as specified and as directed. |
| 6 | Dismantling of boarding, any description, fixed in any position with nails etc including cover fillets, complete all as specified and as directed by Engr-in-Charge. |
| 7 | M&L for 9 mm thick Prelaminated particle board, interior grade, prelaminated one side with decorative choice lamination & other side balancing white lamination, fixed with screws to timber frame work fixed in ceiling complete, all as specified & directed by Engineer-in-charge. |
| 8 | M&L 3mm thick Cover fillets of tempered hard board, 40mm wide and fixing with screws all as Specified |
| 9 | Dismantling wall and ceiling board or insulation boards any thickness including cover fillets complete, all as specified & directed by Engineer-in-charge. |
| 10 | M&L in repair Anodised aluminium snap grid frame work Size of grid 605 x 605mm for false ceiling complete all as specified and directed . |
| 11 | S&F in repair Hangers (Size of grid 605 x 605mm) 6 mm dia. G.I. (upto 1200mm length) adjusting level fixed to roof slabs by means of ceilling cleats made out of G.I. flat 40 x 3 mm size 60mm long and expansion hold fasteners 12.5mm dia. 40mm long complete all as specified complete all as specified and directed. |
| 12 | M&L for 12 mm thick gypsum board in ceiling fixed with screws as per manufactureres instruction, complete all as specified and as directed by Engr-in-Charge. |
| 13 | S&F in repair anodised aluminium frame for doors, windows, ventilators or in partitions with one or more rebates including jointing, cleat glazing clips, aluminium mongry etc fixing of sheet glass and particle board complete all as specified & directed by Engineer-in-charge. |
| 14 | Taking down aluminium doors ,windows, ventilator shutters any size or in any position complete all as specified and directed. |
| 15 | S & F anodised aluminium door shutters, fixed type without sash bar, aluminium section weighing 0.55 Kg/m including necessary jointing cleats , glazing clips , rubber neoprene packing , 2 Nos handle 150 mm long and two nos of 150mm long aluminium tower bolots. in each shutter, hinges , anonised aluminium snap beading fixed with screws complete all as specified and as directed. |
| 16 | Supply and fixing 5.5 mm thick tinted glass in square exc 0.5 sqm in each pane with heat reflecting properties , fixed to aluminium frame or door with glazing clips, etc., complete all as specified and as directed by the Engineer-in-Charge. |
| 17 | M&L in repair for 4.8 mm thick sheet glass ordinary quality and glazing with aluminum section beading in square n. exc. 0.5 Sqm in each pane, complete all as specified and as directed. |
| 18 | M&L in repair 19mm thick Prelaminated particle board, interior grade, prelaminated one side with deocrative choice lamination & other side balancing white lamination, fixed with screws to timber frame work complete all as specified and as directed. |
| 19 | S & F in repairs gear wheel for rolling shutter of any size as required, complete all as specified and as directed by Engineer-in-Charge. |
| 20 | S & F in repairs operating handle for rolling shutter, complete all as specified and as directed by Engineer-in-Charge. |
| 21 | S & F in repairs rolling shutter lathe of 1.25mm thickness, shutter slots, complete all as specified and as directed by Engineer-in-Charge. |
| 22 | S & F in repairs Gear box for rolling shutter of any size, complete all as specified and as directed by Engineer-in-Charge. |
| 23 | S & F in repairs Gear worm for rolling shutters of different sizes as ordered, complete all as specified and as directed by Engineer-in-Charge. |
| 24 | S & F in repairs ball bearing of required dia fixed to mild steel sliding door of any size, complete all as specified and as directed by Engineer-in-Charge. |
| 25 | S & F in repairs ball bearing suitable for rolling shutters of any size as ordered, complete all as specified and as directed by Engineer-in-Charge. |
| 26 | Taking down the existing unserviceable locking lever from the rolling shutters and supply and fix new locking arrangement for the rolling shutter of any size and type including welding/ fixing with nuts and bolts etc, complete all as specified and as directed by Engineer-in-Charge. |
| 27 | Taking down complete rolling shutter of any size and repair and replacement of damaged parts of rolling shutter and welding, oiling, greasing complete and re-fixing back in its original position and making good to disturbed surface and including one coat of synthetic enamel paint complete all as specified and as directed by Engineer-in-Charge. |
| 28 | Dismantling structural steel work in cluding doors, gates but excluding framed truss etc. complete all as specified and as directed. |
| 29 | S&F Framed work as in doors or gates of angle, tube and other section with gusset plates, rails races, etc., complete, drilled for fixing of steel sheeting or other covering. Doors, etc. to be prepared for hanging or sliding with and including either hooks and hinges or steel hanging door fittings (exclusive of steel sheeting or other covering, running rails and guides) and hanging; also fastening and fixing complete to similar work conferming to Fe 290 Gde 165 complete all as specified and as directed. |
| 30 | S&F 1.00 mm thick mild steel, plain, black sheet in wall cladding, steel gates and similar work, cut to size, holes punched, including round headed screws, clout nails or rivets and fixed to wood or steel framing with plain 40 mm lap joints with riveted or welded seams, including bending or turning up, mitred angles, etc as required complete all as specified and directed. |
| 31 | Taking down chowkats or frames not exc 1.5 Sqm each with shutters ( with out taking off shutters from the frames) including making good of disturbed portion except space for holdfast complete all as specified and directed. |
| 32 | Taking down chowkats or frames exc 1.5 sqm but not exc 4.0 Sqm each with shutters ( with out taking off shutters from the frames) including making good of disturbed portion except space for holdfast complete all as specified and directed. |
| 33 | Taking down shutters of any description exc 1.00 Sqm but not exc 2.00 Sqm each complete all as specified and directed. |
| 34 | S&F Solid PVC Door Frame of size 50mm x 47mm made out of 5mm plain colour PVC sheet reinforced with M.S. Square tube, suppling & fixing in opening as per specification & drawing complete, all as specified & directed by Engineer-in-charge. |
| 35 | S & F Factory made solid panel PVC door shutter 30mm thick (style) consisting of frame made out of M.S. tubes for top & bottom rails, M.S. frame shall be covered with heat moulded plain colour PVC `C' channel heaving a PVC sheet strip of 20mm width suck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail; Panelling of plain colour PVC sheet to be fitted in the M.S frame wedded/ sealed to the stiles, & rails with suitable PVC sheet beading, and joined together with solvent cement, supplying & fixing in the frame at site as per specification & drawing complete all as specified and as directed. |
| 36 | S&F fabricated flush shutters, 30mm thick, solid core construction, with block board core and plywood face panels, commercial type on both sides complete, all as specified & directed by Engineer-in-charge. |
| 37 | Material & Labour 2nd class hardwood made 30mm thick glazed skelton shutters, open rebated and prepared to receive glass, gauge etc. divided into squares edges of framing, plain, chamfered or rounded, mitred fitted with cut and mitred beads for securing glass/gauge etc. with sizes of members of shutters as specified in SSR part-I section 8 clause 8.24(a) supplt and fixed to choukats complete all as specified and directed by Engineer-in-Charge at site. |
| 38 | S& F Galvanised mild steel wire cloth 0.56 mm nominal dia of wire and average width of aperature 1.18mm as in gauze door /window/ventilators shutters complete, all as specified & directed by Engineer-in-charge. |
| 39 | S&F 150mm long extruded aluminium alloy handles, fabricated type, anodised .complete, all as specified & directed by Engineer-in-charge. |
| 40 | S&F 150mm long aluminium anodised barrel tower bolts of extruded section complete, all as specified & directed by Engineer-in-charge. |
| 41 | S&F for Butt hinges, 125mm, extruded aluminium alloy with galvanised mild steel hinge pin, anodised and fixed, type B-21, complete all as specified and as directed by Engr-in-Charge. |
| 42 | S&F butt hinges, extruded aluminium alloy with galvanised mild steel hinge pin, anodised and fixed, type C-21, 100mm long complete, all as specified & directed by Engineer-in-charge. |
| 43 | S&F 300mm long aluminium alloy, anodised, sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast-aluminium alloy complete all as specified and as directed. |
| 44 | S&F 150mm long Floor door stopper of aluminium alloy body and tongue, anodised, with hard drawn steel spring,fixed with door complete all as specified and as directed. |
| 45 | S&F Door closer hydraulically regulated, aluminium body designation No. 2, universal type, complete all as specified and as directed. |
| 46 | S&F in repairs mild steel ordinary rat tail rod pattern 300 mm long door spring incl roller and roller plate etc, complete all as specified and as directed by Engr-in-Charge. |
| 47 | S& F in repair anodised aluminium alloy curtain rails incl brackets, stops, rollers etc, complete all as specified and as directed by Engr-in-Charge. |
| 48 | Hacking out old broken glass (any thickness, size, quality or description) from wooden frames or stone,concrete or brick surrounds, glazed with putty of fixed with beads complete all as specified and directed. |
| 49 | S&F 4 mm thick sheet glass, ordinary quality and glazing with oil putty in square not exceeding 0.5 Sqm in each pane, complete all as specified and directed. |
| 50 | S&F in repairs vanishing blinds of vertical/Horizontal type of any colour including its opration rod counter weights & pelmet moving channel for blinds complete all as specified and as directed by Engr-in-Charge. |
| 51 | S & F in repairs laminated wood flooring 8mm thick, including skirting, floor brakers etc, as per manufacutred instruction with a layer of foam backing, complete, all as specified & directed by Engineer-in-charge. |
| 52 | M&L for preparation of new or previously untreated steel surfaces of any description, over 10cm width or girth, not otherwise described and applying two coats of synthetic enamel paint over a coat of red oxide zinc chrome primer complete, all as specified & directed by Engineer-in-charge. |
| 53 | M&L for preparing new or previously untreated wood based surfaces of any description, not otherwise described, over 10 cm width or girth and applying two coats of synthetic varnishing finishing coat, over a coat of wood filler coat complete, all as specified & directed by Engineer-in-charge. Please Enable Macros to View BoQ information |
