|
| 1 | Dismantling Asbestos Cement Corrugated or Semicorrugate in Roof covering, complete all as specified and directed. |
| 2 | Dismantling timber scantling 40.0 sqcm and over in section in any position as in framed / unframed works such as roof purlins, rafters, fillets, ridges etc as in roof/ ceiling, complete all as specified and directed. |
| 3 | Dismantling of wrought iron or mild steel work of any description, complete all as specified and directed. |
| 4 | S&F of pre-painted 0.50mm thick Gavalume Aluminium Zinc coating GI based corrugated / semi corrugated / trapezoidal steel sheet of any colour having tensile strength 550 MPa and AZ 150 grade as in roof covering/cladding to walls, fixed with self tapping screws, complete all as specified and directed. |
| 5 | S&F of pre-painted 0.50mm thick Gavalume Aluminium Zinc coating GI based plain steel sheet of any colour having tensile strength 550 MPa and AZ 150 grade as in roof covering/cladding to walls, fixed with self tapping screws, complete all as specified and directed. |
| 6 | M&L for 6mm thick asbestos cement, corrugated or semi-corrugated sheets fixed with L-type or J-type or cranked hook bolts in roofs, walls etc, complete all as specified and directed. |
| 7 | M&L for 6mm thick asbestos cement, one piece plain angular ridge or two piece adjustable plain wing ridge orrugated or semi-corrugated sheets fixed with L-type or J-type or cranked hook bolts in roofs, walls etc, complete all as specified and directed. |
| 8 | M&L for structural steel Fe-410-W(Gde-E-250) quality B for roof trusses (framed), trussed, purlins, crane gantries, rails and fastenings and heavy bracket framing (Beam, tee, angle, channel or flat sections) including distance pieces, cleats etc, complete all as specified and directed. |
| 9 | M&L for preparation of newly steel or iron surfaces of any description, not otherwise described over 10cm width or girth and applying two coats of synthetic enamel paint over a coat of red oxide primer complete all as specified and directed |
| 10 | M&L 4mm th Non asbestos fibre cement building boards fixed or laid/ inserted to timber/GI/Aluminium framework with screws and Gl frame work for seamless ceiling comprising of Gl perimeter channnel 0.55 mm thick with two unequal flanges of 20 and 30 mm and web of 27 mm fixed to surrounding wall using nylon sleeves and screws at 450 mm centre to centre/intermediate channel 0.9 mm thick having two equalflanges of 15 mm each and web of 45 mm suspended from soffit at approx 900 mm centre to centre with Gl cleat and steel expansion fasteners with and including ceiling section (not exc 1.2 m length) of 0.55 mm thickness having kurled web of 50 mm and flange of 26 mm each with lips of 10.5 mm fixed to the intermediate channel with connecting clips across the intermediate channel at 457 mm centre to centre, duly fixed in ceiling frame work,including hanger 6mm dia GI ( upto 1200mm length) fixed to ceiling cleats made out of GI Flat 40 x 3mm size 60mm long and expansion hold fastener 12.5 mm dia 40mm long Including demolition, complete all as specified and directed. Make :- as approved |
| 11 | Demolition of cement concrete (unreinforced) in ground floors and pavings n exc 15cm thickness (below or above ground level) complete all as specified and directed |
| 12 | M&L PCC Type D2 1:4:8 (using 40 mm graded stone aggregate) in foundations, filling and mass concrete, complete all as specified and directed. |
| 13 | M&L 75 mm thick cement concrete type C2 1:3:6 (using 40 mm graded stone agg) as in plinth protection and path surface, complete all as specified and as directed. |
| 14 | Dismantling, floor, hearth or wall tiling including cement mortar bedding (but not backing) and rubbish off the premises, complete all as specified and directed. |
| 15 | M/L for semi skid ceramic color tiles of size exc 0.18 sqm not exc 0.38 sqm and 7 to 8 mm thick (square / rectangular) as in flooring etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match over and including 15 mm thick screed/ bedding layer in CM (1:6) complete all as specified and as directed. |
| 16 | M/L for semi skid ceramic color tiles of size exc 0.11 sqm not exc 0.18 sqm and 7 to 8 mm thick (square / rectangular) as in flooring etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match over and including 15 mm thick screed/ bedding layer in CM (1:6) complete all as specified and as directed. |
| 17 | M&L for ceramic colour tiles in vertical surface of size 450 X 300 x 7 mm thick, jointless type, set and jointed in neat cement slurry and pointed in white or coloured cement to match tiles with and including 10 mm thick rendering in CM (1:4) for receiving the tiles, complete and all as directed. |
| 18 | M&L for factory made PU coated, chequered cement concrete tiles of any colour 30 cm x 30cm x 20 to 22 mm thick, set & jointed and pointed in neat cement slurry mixed with grey cement and pigments, laid over and including 15mm thick screed bed or bedding layer in CM 1:6, complete all as directed. |
| 19 | Demolition of stone slabs and tiles of any description or thickness in floors approns etc laid bedded and pointed in any mortar complete all as specified and directed. |
| 20 | Demolition of stone slabs and tiles of any description or thickness in floors approns etc laid dry or laid dry and pointed complete all as specified and directed. |
| 21 | M&L screed bed or bedding layer of mortar 15mm thick for laying floor finishes in CM 1:4. |
| 22 | M&L for rendering 10 mm thick backing coat on vertical surface of brickwork wall etc in CM 1:3 to receive wall finishes. |
| 23 | M & L for Mirror polish Machine cut kota stone slab flooring 20-25mm thick over cement screed base laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing complete incl demolition etc all as specified and directed. |
| 24 | M & L for Mirror polish Machine cut kota stone 20-25mm thick in risers of steps ,skirting ,dados and pillar laid over cement screed and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing complete incl demolition all as specified and directed. |
| 25 | M&L 20mm thick granite slab, tabled rubbed, machine cut, duly grinding, polishing, moulding etc of all outer edges / sharp corners, duly fixed in steps, jambs, pillars, window cills, cooking platforms and like in cement mortar (1:4), incl pointing in grey cement (1:2) using marble dust with admixture of pigment to match with the shade of slab, complete all specified and directed. |
| 26 | M&L 20 mm thick Marble, tabled rubbed, machine cut, duly grinding, polishing, moulding etc of all outer edges / sharp corners, duly fixed in steps, jambs, pillars, window cills, cooking platforms and like in cement mortar (1:4), incl pointing in grey cement (1:2) using marble dust with admixture of pigment to match with the shade of slab, complete all specified and directed. |
| 27 | M&L for factory made PU coated, machine pressed precast concrete interlocking paver block of any shape and size confirming to IS 15658-2006 of 80mm thickness M-40 Grade with grey cement with pigment made of PVC moulded (or rubber mould) with vibrating system, with , including in CM (1:3) in edges of pavers, complete all as specified and directed.. |
| 28 | M&L Sand filling under floors or in foundations including wateringand consolidation complete all as specified and directed. |
| 29 | M&L for brick work with fly ash lime bricks (FALB) conforming to IS 12894, old size brick, straight or curved on plan exc 6m mean radius built in cm (1:6), incl demolition of brick work old one complete all as specified and directed. |
| 30 | Taking down cement plaster on brick or stone wall including racking out joints, hacking for key, scrubbing down with water etc complete all as specified and directed. |
| 31 | M&L for 15 mm thick rendering in CM (1:4) on fair/other than fair faces of brick work finished even and fair complete all as specified and directed. |
| 32 | M&L for 10 mm thick rendering in CM (1:6) on fair/other than fair faces of brick work finished even and fair complete all as specified and directed. |
| 33 | M&L for rendering 5mm thick on fair faces of concrete surfaces in ceilings in cement mortar 1:3, finished even and smooth without using extra cement cement plaster old complete all as directed. |
| 34 | M&L for preparation of new plastered surface and applying two coat of cement based paint over and incl one coat of exterior grade cement based primer, complete all as specified and directed. |
| 35 | M&L for preparation of new plastered surface and applying two coats of oil bound distemper, over and incl a layer of wall care putty to get even and smooth level finish on new plastered surface of internal wall, complete all as specified and as directed. |
| 36 | M&L for preparation of new plastered surface and applying three coats of white wash (lime) on new plastered surface of ceiling, complete all as specified and as directed. |
| 37 | M&L for complete removal of existing treatment by brushing, washing, rubbing down, scraping from old treated surfaces of wall and applying two coat of oil bound distemper over a with alkali resistant priming paint over 3mm thick (JK/Birla) wall care putty to get smooth and level finish, complete all as specified and directed. |
| 38 | M&L for preparation of existing surface of wall by bruss , sand paper, surface replacement if required etc on surface and applying two coat of oil bound distemper white or any tinted , complete all as specified and directed. |
| 39 | M&L for preparation of existing surface of wall by bruss , sand paper, surface replacement if required etc on surface and applying one coat of oil bound distemper white or any tinted , complete all as specified and directed. |
| 40 | M&L for preparation of existing surface ceiling by bruss , sand paper, surface replacement if required etc on surface and applying two coat of oil bound distemper white or any tinted , complete all as specified and directed. |
| 41 | M&L for preparation of existing surface of wall by bruss , sand paper, surface replacement if required etc on surface and applying one coat of cement based paint complete all as specified and directed. |
| 42 | M&L for preparing old or previously treated surfaces of wood or wood based materials of any description not otherwise described over 10 cm width or girth and applying one coat of synthetic enamel paint to match the existing surfaces, complete all as specified and directed. |
| 43 | M&L for preparing old painted steel surfaces of any description over 10 cm width or girth not otherwise described and applying one coat of synthetic enamel paint complete all as specified and directed. |
| 44 | M&L for preparation of existing surface of walls by complete removal of existing treatment and applying two coat of cement based paint over a coat of alkali resistant priming paint complete all as specified and directed. |
| 45 | S&F 500 litres capacity Rotational moulded polyethylene water storage tanks TRIPPLE LAYER (Cylindrical vertical with closed top) hoisted and fixed in position including 20 mm dia ball brass valve complete all as specified in SSR Part I including disconnectiong/dismantling of existing tank. |
| 46 | S&F 1000 litres capacity Rotational moulded polyethylene water storage tanks TRIPPLE LAYER (Cylindrical vertical with closed top) hoisted and fixed in position including 20 mm dia PVC float valve complete all as specified in SSR Part I. including disconnectiong/dismantling of existing tank. |
| 47 | Disconnecting existing tanks, setting aside (or lowering if required) for repairs, cleaning etc. and hoisting, reconnecting and re-fixing in position of exc. 250 litres & not exc. 500 litres capacity of tanks,Date of cleaning of tank will be marked on the tank of uniform & suitable Size of letters & numbers . complete all as specified and directed. |
| 48 | Disconnecting existing tanks, setting aside (or lowering if required) for repairs, cleaning etc. and hoisting, reconnecting and re-fixing in position of 1000 litres capacity of tanks, Date of cleaning of tank will be marked on the tank of uniform & suitable Size of letters & numbers . complete all as specified and directed. |
| 49 | S & F in repairs 20 mm bore Gun-metal, globe or gate valves, with iron wheel head, screwed both ends for iron pipe and fixed complete all as specified and directed. |
| 50 | S&F in repairs 15 mm bore Brass CP wall mixer for mixing hot & cold water screwed down for iron pipe and fixed, complete all as directed. |
| 51 | Taking up or down 15 mm/16mm bore steel tubing and connections including fittings. |
| 52 | Taking up or down 20 mm bore steel tubing and connections, including fittings. |
| 53 | S & F 15 mm bore Galvanized Steel tubes, medium grade fixed to walls and ceilings or laid in floors. |
| 54 | S & F 20 mm bore Galvanized Steel tubes, medium grade fixed to walls and ceilings or laid in floors. |
| 55 | Taking down eaves gutter and rain water pipes including all fittings any size and pattern. |
| 56 | S & F 110 mm bore PVC (SWR) Soil, waste and vent pipes single socketed in any length with rubber ring joints fixed to walls/trench. |
| 57 | S & F 75 mm bore PVC (SWR) Soil, waste and vent pipes single socketed in any length with rubber ring joints fixed to walls/trench. |
| 58 | S & F in repairs 110 mm bore PVC (SWR) bends of any radius complete all as specified and directed. |
| 59 | S & F in repairs75 mm bore PVC (SWR) bends of any radius complete all as specified and directed. |
| 60 | S & F 110 mm bore PVC (SWR) junction single (Single `T') equal or unequal. |
| 61 | S & F 75 mm bore PVC (SWR) junction single (Single `T') equal or unequal. |
| 62 | S & F in repairs PVC Floor trap of 75 mm outlet with grating including jointing to waste pipe in run lead. |
| 63 | S&F in repair Vitreous China wash basin, white, flat back, size 550x400mm excluding taps, waste chain and plug and porcelain stopper but including brackets, CP waste copling,including PTMT PVC connection 600mm complete all as specified and directed. |
| 64 | Supply and Fix in repairs 10 Litres, PVC, valve less, syphonic action type, Flushing Cistern, high level, white inlet, ball valve, float, chain and pull, and brackets including PTMT PVC connection 600mm long.flush pipe 32mm dia PVC. |
| 65 | S&F in replacement of 1st quality vitreous china squatting pan (IWC) Orissa pattern of size 580x440 mm, white colour with integral foot rests water closet including flush pipe but exluding flushing cistern, duly fixed in lime concrete bedding and making good of floor surface, complete all as directed. |
| 66 | Supply & Fix in repairs Vitreous China wash down water closet pan (pedestal pattern), EWC, coloured including jet system & matching coloured seat covered fixed complete all as specified. |
| 67 | Providing and fixing Table Top white Vitreous China wash basin of specified size and model, 32mm CP brass waste coupling, C.P brass pillar cock 15mm size having long neck and Aerator, C.P brass bottle trap 32 mm size, extension pipes, wall flanges and concealed G.I clamps complete including granite, making necessary holes and other cutting in the counter top and fixing the wash basin, pillar cock rigidily including making good the walls wherever required all complete as per the architectural drawings and as directed by Engineer-in-Charge. |
| 68 | S&F in replacement ceramic One Piece Water Closet including slow falling seat cover and all necessary fittings of suitable size all as per as approved complete all as directed. |
| 69 | S&F in repair Vitreous China urinals ,half turn bowl type (back or corner wall type), complete including providing and fixing plugs, bedding urinal against wall in cement mortar 1:2, securing urinal to plugs with and including 60mm long brass screws, pointing around urinal back in cement; fixing automatic flushing cistern with brackets, flush pipe, grating and Union for discharge pipe complete all as directed. |
| 70 | S&F in repairs PTMT grating of squre/round shape, overall size of 150x150mm with hinge type openable jali of 100 mm dia size with and incl fixing with CM to floor/nahani traps etc, complete all as directed. |
| 71 | S&F in replacement PVC waste pipe 32 mm dia 750 mm long for wash hand basin or for kitchen sink, complete all as specified and directed. |
| 72 | S&F in repair of PVC connection 450 x 15mm dia PTMT (PVC), complete all as specified and directed. |
| 73 | S&F in repairs of 600x450mm size and 4mm thick beveled edge looking mirror of selected quality glass, having PVC moulding/beading all around, mounted on 4mm thick PVC board, with and incl fixing accessories, complete all as specified and directed. |
| 74 | S & F in repairs 15 mm bore Bib taps, cast copper alloy,chromium plated with crutch or butterfly handle, screwed down, screwed for iron pipe or for brass ferrule. |
| 75 | S & F in repairs 15 mm bore Bib taps long body fancy type cast copper alloy,chromium plated with crutch or butterfly handle, screwed down, screwed for iron pipe or for brass ferrule. |
| 76 | S & F in repairs 15 mm bore stop/angle cock fancy type,chromium plated with crutch or butterfly handle, screwed down, screwed for iron pipe or for brass ferrule. |
| 77 | S & F in repairs 15 mm bore concealed type stop cock fancy type,chromium plated with long sank crutch or butterfly handle, screwed down, screwed for iron pipe or for brass ferrule. |
| 78 | S&F in repair of overhead shower of dia 125 mm round shape single flow, ABS body chrome plated fancy type, with and incl swirl type shower arm of 20mm dia with wall flange made of cast copper alloy, chromium plated fancy type, complete all as directed. |
| 79 | S&F in replair of waste coupling, chromium plated (half or full threaded), 32 mm dia size, complete all as directed. |
| 80 | Taking down chowkhats with shutters (without taking off shutters from the frame) area exc 1.5 sqm but not exceeding 4 sqm and making good the disturbed portion/surfaces, in CM 1:3 complete all as directed. |
| 81 | All as per item here-in-above but not exc 1.5 sqm each |
| 82 | Taking down shutters of any description not exc 01 Sqm each, complete all as specified and directed. |
| 83 | Taking down shutters of any description exceeding 01 Sqm and not exc 02 Sqm each, complete all as specified and directed. |
| 84 | S&F of 35mm thick factory made modular designer flush doors, solid core construction, with block board core and prelamination on both sides, complete all as specified and directed. Make : Rajshree / Sintex / Greenlam |
| 85 | M&L for second class hard wood. Plain, solid, straight chowkhats and frame, wrought framed, rebated on the solid, rounded or chamfered, put together with glue, pinned at joints and fixing, complete all as specified and directed. |
| 86 | M&L for 35mm thick second class hard wood glazed & skeleton shutter for doors (fully glazed or gauged) open rebated & prepared to receive glass, gauge etc (with sash bars) edges of framing plain, chamfered sash bar, or rounded, fitted without & mitred beads for securing glass etc, conforming to IS-1003 Part-I & II; size of members of shutters as specified in SSR Part-I section–8, clause 8.24(a) complete all as specified and directed. |
| 87 | S&F 18mm thick prelaminated MDF board, interior grade, prelaminated one side with decorative choice lamination & other side balancing white lamination, fixed with screws to timber frame work in any situation as in cup board shelves/shutter or similar work, complete all as specified and directed. |
| 88 | S&F continuous (piano) hinges, mild steel bright finish in electro galvanized width of flat (when open) in 30mm, complete all as specified and directed |
| 89 | Factory made solid panel PVC door shutter 30 mm thick (style) consisting of frame made out of M.S. tubes for top & bottom rails. M.S. frame shall be covered with heat moulded plain colour PVC ‘C’ channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail,lock rail & bottom rail on either side & as gap insert for top rail & bottom rail;Panelling of plain colour PVC sheet to be fitted in the M.S. frame welded / sealed to the stiles & rails with suitable PVC sheet beading, and joined together with solvent cement, suppling & fixing in the frame at site as per specification & drawing. |
| 90 | S&F of Solid PVC door frame of size 50 mm x 47 mm made out of 5 mm wood coloured PVC sheet and edges, reinforced with MS square tube, as specified in SSR Part-II 2010 (Section 8, on Page no - 175), complete all as directed. |
| 91 | S&F of 100mm butt hinges medium weight cold rolled mild steel ISI marked and fixed with mild steel wood screws or welded to angle frame, complete all as specified and directed. |
| 92 | S&F of 100 mm size butt hinges, extruded aluminum alloy with galvanized mild steel pin type B-21 anodized complete all specified and directed |
| 93 | S&F of 150mm long barrel tower bolt aluminum anodized extruded section fixed with cadmium plated screws complete all as specified and directed. |
| 94 | S&F of 150mm aluminum handle cast type anodized complete all specified and directed. |
| 95 | S&F of 300mm long mild steel, sliding door bolt plate type, stove enamelled black, with bright bolt not less than 12mm dia with and incl minimum of 6 bolts and nuts, complete all as specified and directed. |
| 96 | M&L in repairs for stainless steel curtain rod 25mm dia steel pipe cutting into length as required at site with and incl SS end caps/lobs and SS wall mounting brackets, complete all as specified and directed. |
| 97 | M&L for mild steel hold fast and similar small articles conforming to Fe-290 Gde-165, complete all as specified and directed. |
| 98 | M&L for cement concrete 1:2:4 type B-0 (12.5mm graded aggregate) for bed block for fixing of chowkhats, and concrete work complete all as specified and directed |
| 99 | Hacking out old broken glass (any thickness, size, quality or description) from wooden frames or stone, concrete or brick surrounds, glazed with putty or fixed with beads, complete all as directed. |
| 100 | S&F of 3 mm thick sheet figured glass pin headed type, not exc 0.50 sqm in each pane, duly fixed with oil putty or wooden bidding as required, complete all as directed. |
| 101 | S&F of 3 mm thick sheet glass ordinary quality and glazing type, not exc 0.50 sqm in each pane, duly fixed with oil putty or wooden bidding as required, complete all as directed. |
| 102 | S & F stainless steel wire cloth 0.36 mm nominal dia of wire and average width of aperture 1.40 mm fixed with tinned tacks or galvanized wire staples complete all as specified and directed |
| 103 | S & F in repairs stainless steel wire cloth 0.36 mm nominal dia of wire and average width of aperture 1.40 mm fixed with tinned tacks or galvanized wire staples complete all as specified and directed |
| 104 | S&F powder coated aluminium slinding window with three track outer frame suitable for sliding aluminium shutters, weight of aluminium setion not less than 0.55Kg/M of three track frame, including necessary joining cleats glazing clips rubber packing Powder coated aluminium shop beading screws with two shutter Including 5mm thick coloured glass and one shutter with stainless steel wire mesh including necessary locking arrangement , handle, aluminium grill of aperature size 50mm and 4mm dia etc complete all as specified. |
| 105 | M&L for powder coated aluminium frame for doors, windows, ventilators with one or more rebates, fabricated out of powder coated aluminium hallow square or rectangular section of required size incl necessary joining cleats, fixing screws etc complete, having size of frame for doors 100mm x45mm x 3.18 mm thick; for window 104mm x 45mm x 3mm thick; for ventilators 59mm x 33mm x 2.5mm, complete all as specified and directed. |
| 106 | M&L for powder coated aluminium door shutters, aluminium section for top rail and styles 85mm x 45mm x 2.0mm thick; bottom rail 100mm x 45mm x 2mm thick and lock rail 100mm x 45mmx 2.0mm thick incl necessary joining cleats, glazing clips, ruber neoprene packing, handles 2 Nos in each door, powder coated aluminum hinges, powder coated aluminum snap beading, screws etc, complete all as specified and directed. |
| 107 | M&L for powder coated aluminum window shutters, side hung type without sash bars, aluminium sections for frame weighing 0.55 kg/m incl necessary joining cleats, glazing clips, rubber packing, powder coated aluminum snap beading, screws, powder coated aluminum fittings such as peg stays 150mm long (01 No), hinges type B-21 100mm long (02 No), suitable handle (01 No), complete all as specified and directed. |
| 108 | M&L for powder coated aluminium wall partition, window and ventilator shutters, fixed type without sash bar, aluminium section weighing 0.55 kg/m including necessary joining cleats, glazing clips, rubber packing, powder coated aluminium snap beading, screws etc, complete all as directed. |
| 109 | M&L in repairs for aluminium (Extruded section) body door closer, hydraulically regulated, designation No. 3, universal type, suitable for door shutters of 851 to 1000mm in width and of weight between 61 to 80 kg complete all as specified and as directed. |
| 110 | S&F mortice lock of size 100mm aluminium, 4 lever type, duly fixed in aluminium door, complete all as directed. |
| 111 | S&F of glass, tinted type, 5.0 mm thick, each panes exc 0.5 sqm, suitable for aluminium / window/ Ventilators / door opening and similar work, complete all as specified. |
| 112 | M&L Framed work (Fe 410W, Gde 250) as in doors or gates of angle or other section with gusset plates, rails, braces, etc., complete, drilled for fixing of steel sheeting or other covering. Doors, etc. to be prepared for hanging or sliding with and including either hooks and hinges or steel hanging door fittings (exclusive of steel sheeting or other covering, running rails and guides) and hanging; also fastening and fixing etc including hinges weld etc complete all as specified and directed . |
| 113 | S&F for Door stopper 140 mm of aluminium alloy body anodised with tongue of rubber bush at one end fixed to door complete all as spd and directed by Engr in charge |
| 114 | S&F 102 mm Hasp and staple, mild steel, wire type, stove enamelled black, including bolt to hinge plate and fixed with screws complete. |
| 115 | S&F Solid PVC Wall Lining consisting of 5mm thickwood grain printed PVC sheet inclusive of solvent cement and fixing at site on PVC frame as per specifications and drawing incl taking down old one complete all as spd and directed |
| 116 | S&F 5mm thick PVC sheet fillet of width 35mm for wall paneling inclusive of fixing on to wall to make PVC Frame as per specification and drawing Please Enable Macros to View BoQ information |
