|
| 1 | Dismantling and removing R.C.C.columns beams slab staircase landing lintels including stacking the useful materials for reuse and removing the debris within 50m lead |
| 2 | Dismantling brick or stone masonry in lime or cement mortar above 3m. height including stacking the useful materials for reuse and removing the debris within 50m. Lead |
| 3 | Earth work in all kinds of soil in excavation of foundation trenches for columns, basement, tie beams, walls and steps in all kinds of soil including moorum, hard stoney earth and earth mixed with boulders except sheet rocks and boulder requiring blasting with all leads and lifts including dressing and leveling the bed sides up to required depth and depositing the excavated materials at places away from the work site with all leads and lifts, T&P for shoring shuttering dewatering if required etc. complete as per the drawing, designing including cost of all labour, T&P etc. as required for the work complete as directed by the Engineer-in-charge. |
| 4 | Supplying and filling the foundation and plinth with clean coarse river sand of approved quality from approved quarry, laying in layers not exceeding 150mm thick, watering and ramming including cost, conveyance royalty and taxes of all materials, cost of as per the direction of Engineer-In-Charge. |
| 5 | Providing & laying cement concrete of prop (1:3:6) in foundation bed and floors using 40mm nominal size down graded, screened, washed hard black crusher broken granite metal of approved quality & from approved quarry including laying in the layers not exceeding 150mm thick hoisting, lowering, laying, watering and curing etc. Complete. To the required levels including cost, conveyance, royality and taxes of all materials, cost of all labour, T&P etc. as required for the work complete and as per direction of Engineer in charge. |
| 6 | First class Fly Ash Brick work in cement mortar (1:6) in foundation &plinth with best quality bricks having crushing strength from 75KG/cm2 to 99Kg/cm/2, immersing the bricks in water for not less than 6 hours before use (the bricks shall well brunt, free from cracks, well shaped, uniform in size and shall produce a clear metallic ringing sound when struck ) includes moulding, chamfering, corbelling etc. complete as per drawing design and specification, watering and curing for 7 days including cost, conveyance, royality and taxes of all materials, labour, T&P etc. and as per direction of Engineer in charge. |
| 7 | R.C.C work of prop M20 having minimum compressive strength (in work test) 200kg./cm2 in 15cm cubes at 28days after mixing and test conducted in accordance with I.S. 456 and I.S. 516using 12mm to 20mm size (1/2” to ¾”) crusher broken hard black granite chips of 20mm size (not to exceed 25%) of approved quality & from approved quarry including hosting, lowering, laying and compacting concrete with vibrator, watering and curing for 28days, cost of rigid and smooth centering & shuttering and finishing to exposed surface smooth providing, grooves or beads wherever necessary as per direction of the Engineer in charge including cost, conveyance, royalties & taxes of all materials and cost of all labour, T&P etc. as required for the work completion in all respects as per direction of Engineer in charge but excluding cost of M.S rod / Tor steel and binding wires and labour charges for bending, binding wires and labour charges for bending, binding and tying the grills. BaseBase |
| 8 | Plinth Beam |
| 9 | Column ,Beam |
| 10 | Lintel |
| 11 | Straightening, cutting, bending and binding, welding and jointing (if necessary ) coiled/ bent up MS Rods /Tor Steel/deformed rods etc. including hoisting, placing in position, tying the grills binding with 18 to 20 gauge binding wire required for R.C.C work including cost, conveyance, taxes of all materials, cost of all labour, T&P etc. as required for the work complete (weight of binding wire will not be considered) as directed by Engineer-in-charge. (Payment will be made on actual weight of M.S rods or Tor steel linear measurements of rod for finished item of works. 5% wastage and lap length are included in the finished rate). |
| 12 | First class Fly Ash Brick work in cement mortar (1:6) in super structure with best quality bricks having crushing strength from 75KG/cm2 to 99Kg/cm/2, immersing the bricks in water for not less than 6 hours before use (the bricks shall well brunt, free from cracks, well shaped, uniform in size and shall produce a clear metallic ringing sound when struck ) includes moulding, chamfering, corbelling etc. complete as per drawing design and specification, watering and curing for 7 days including cost, conveyance, royality and taxes of all materials, labour, T&P etc. and as per direction of Engineer in charge. |
| 13 | First class Fly Ash Brick work in cement mortar (1:4) in super structure with best quality bricks having crushing strength from 75KG/cm2 to 99Kg/cm/2, immersing the bricks in water for not less than 6 hours before use (the bricks shall well brunt, free from cracks, well shaped, uniform in size and shall produce a clear metallic ringing sound when struck ) includes moulding, chamfering, corbelling etc. complete as per drawing design and specification, watering and curing for 7 days including cost, conveyance, royality and taxes of all materials, labour, T&P etc. and as per direction of Engineer in charge. |
| 14 | 2.5cm. thick grading concrete (1:2:2) on roof slab with 6mm. Size on new work crusher broken Granite chips fnshied smooth incl. watering curring etc. Complete. |
| 15 | Supplying all materials (inclusive of cost, conveyance, taxes, loading and unloading) labour, T&P and providing 6 mm thick cement plaster (1:1) on RCC surface finished smooth including closed deep chiping and slury treatment as per specification drawing and direction of the Engineer-in-charge |
| 16 | Providing 12mm thick cement plaster (1:6) over brick work including cost, conveyance & royalty of all materilas etc. |
| 17 | Providing 16mm thick cement plaster (1:6) over brick work including cost, conveyance & royalty of all materilas etc. |
| 18 | Providing 12mm thick cement plaster (1:4) over brick work including cost, conveyance & royalty of all materilas etc. |
| 19 | 2.5cm AS flooring with CC (1:2:4) with punning using 12 mm crusher broken granites chips. Etc |
| 20 | Providing fitting and fixing 50mm thick RCC Jally on Vntilator as per Specification and direction of Engineer in-Charge |
| 21 | Supplying, fitting & fixing of 35mm thick M.S.Grill Window & Door (Shutter) with M.S.Grill & Iron fittings fixed in proper position for window & shutter including all cost , labour & materials T&P etc. all complete as per direction of EIC.Door 1x1x1.07x2.23=2.39 sqm GD 1x1x1.22x2.23=2.72sqmDoor 1x2x0.91x2.23=4.06 sqm Door 1x1x0.76x2.23=1.69sqmWindow 1x3x1.37x1.37=5.63 sqm Window 1x3x0.91x1.37=3.74 sqmGW 1x1x1.00x1.37=1.37 sqm V 1x1x0.61x0.61=0.37sqm |
| 22 | Fixing Tiles in Antiskid Floor Tile floors on 25mm. thick bed of CM (1:1) jointed with cement slurry without cost of precast tiles.Antiskid Floor Tile - (Size-300mmX300mm) |
| 23 | Fixing Chequred Tiles in floors on 25mm. thick bed of CM (1:1) jointed with cement slurry without cost of precast tiles. |
| 24 | Fixing Tiles to dados skirting & risers on 12mm. thick C.P (1:3) jointed with neat cement slurry without cost of precast tiles.Digital Wall Tile - (Size-300mmX400mm) |
| 25 | Providing 12mm thick cement plaster (1:4) over brick work with neat cement punning incluidng racking out joints including cost, conveyance & royalty of all materilas etc. |
| 26 | Priming one coat with any approved wall primer including cost of all labour ,materials T&P with taxes ,transportation etc all complete( Wall primer)Itmem No(10,11,12,15) |
| 27 | Providing Distemper two coat with approved quality and shade over piastered surface with brush including cleaning the surface watering curing ,cost of paint ,taxes,labour charges T & p etc complete as per the direction of engineer in charge. |
| 28 | Providing weather coat two coats with approved quality and shade over piastered surface with brush including cleaning the surface watering curing ,cost of paint ,taxes,labour charges T & p etc complete as per the direction of engineer in charge. |
| 29 | Painting two coats of enamel paint over a coat of primer to iron works as per approved quality over a coat of primer sand papering polishing the surface including cost, conveyance taxes of all materials cost of all labour T&P etc as required for the work complete in all floors as per direction of the Engineer-in-charge. (Paint and primer will be supplied by the contractor). |
| 30 | Providing , supplying of all labour with T&P for wall painting / Mural displaying logo for art of different image & drawaing in wall surface with weather coat over a coat of primer incluidng cleaning the exhisting surface with cost & conveyance of all materials etc. |
| 31 | Providing & supplying of seating arrangement of students & teachers including cost of transportation & materials etc.Junior Chair |
| 32 | Junior Table |
| 33 | Teaching Table |
| 34 | Chair |
| 35 | Construction of TOILETEarth work in all kinds of soil in excavation of foundation trenches for columns, basement, tie beams, walls and steps in all kinds of soil including moorum, hard stoney earth and earth mixed with boulders except sheet rocks and boulder requiring blasting with all leads and lifts including dressing and leveling the bed sides up to required depth and depositing the excavated materials at places away from the work site with all leads and lifts, T&P for shoring shuttering dewatering if required etc. complete as per the drawing, designing including cost of all labour, T&P etc. as required for the work complete as directed by the Engineer-in-charge. |
| 36 | Supplying and filling the foundation and plinth with clean coarse river sand of approved quality from approved quarry, laying in layers not exceeding 150mm thick, watering and ramming including cost, conveyance royalty and taxes of all materials, cost of as per the direction of Engineer-In-Charge. |
| 37 | Providing & laying cement concrete of prop (1:3:6) in foundation bed and floors using 40mm nominal size down graded, screened, washed hard black crusher broken granite metal of approved quality & from approved quarry including laying in the layers not exceeding 150mm thick hoisting, lowering, laying, watering and curing etc. Complete. To the required levels including cost, conveyance, royality and taxes of all materials, cost of all labour, T&P etc. as required for the work complete and as per direction of Engineer in charge. |
| 38 | First class Fly Ash Brick work in cement mortar (1:6) in foundation &plinth with best quality bricks having crushing strength from 75KG/cm2 to 99Kg/cm/2, immersing the bricks in water for not less than 6 hours before use (the bricks shall well brunt, free from cracks, well shaped, uniform in size and shall produce a clear metallic ringing sound when struck ) includes moulding, chamfering, corbelling etc. complete as per drawing design and specification, watering and curing for 7 days including cost, conveyance, royality and taxes of all materials, labour, T&P etc. and as per direction of Engineer in charge. |
| 39 | R.C.C work of prop M20 having minimum compressive strength (in work test) 200kg./cm2 in 15cm cubes at 28days after mixing and test conducted in accordance with I.S. 456 and I.S. 516using 12mm to 20mm size (1/2” to ¾”) crusher broken hard black granite chips of 20mm size (not to exceed 25%) of approved quality & from approved quarry including hosting, lowering, laying and compacting concrete with vibrator, watering and curing for 28days, cost of rigid and smooth centering & shuttering and finishing to exposed surface smooth providing, grooves or beads wherever necessary as per direction of the Engineer in charge including cost, conveyance, royalties & taxes of all materials and cost of all labour, T&P etc. as required for the work completion in all respects as per direction of Engineer in charge but excluding cost of M.S rod / Tor steel and binding wires and labour charges for bending, binding wires and labour charges for bending, binding and tying the grills. Base |
| 40 | Plinth Beam |
| 41 | Column,Beam |
| 42 | Lintel |
| 43 | Straightening, cutting, bending and binding, welding and jointing (if necessary ) coiled/ bent up MS Rods /Tor Steel/deformed rods etc. including hoisting, placing in position, tying the grills binding with 18 to 20 gauge binding wire required for R.C.C work including cost, conveyance, taxes of all materials, cost of all labour, T&P etc. as required for the work complete (weight of binding wire will not be considered) as directed by Engineer-in-charge. (Payment will be made on actual weight of M.S rods or Tor steel linear measurements of rod for finished item of works. 5% wastage and lap length are included in the finished rate). 0.54+0.39+1.22+0.21+0.05+0.76=3.17 Cum |
| 44 | First class Fly Ash Brick work in cement mortar (1:6) in super structure with best quality bricks having crushing strength from 75KG/cm2 to 99Kg/cm/2, immersing the bricks in water for not less than 6 hours before use (the bricks shall well brunt, free from cracks, well shaped, uniform in size and shall produce a clear metallic ringing sound when struck ) includes moulding, chamfering, corbelling etc. complete as per drawing design and specification, watering and curing for 7 days including cost, conveyance, royality and taxes of all materials, labour, T&P etc. and as per direction of Engineer in charge. |
| 45 | First class Fly Ash Brick work in cement mortar (1:4) in super structure with best quality bricks having crushing strength from 75KG/cm2 to 99Kg/cm/2, immersing the bricks in water for not less than 6 hours before use (the bricks shall well brunt, free from cracks, well shaped, uniform in size and shall produce a clear metallic ringing sound when struck ) includes moulding, chamfering, corbelling etc. complete as per drawing design and specification, watering and curing for 7 days including cost, conveyance, royality and taxes of all materials, labour, T&P etc. and as per direction of Engineer in charge.Wall of 0.125m |
| 46 | Supplying all materials (inclusive of cost, conveyance, taxes, loading and unloading) labour, T&P and providing 6 mm thick cement plaster (1:4) on RCC surface finished smooth including closed deep chiping and slury treatment as per specification drawing and direction of the Engineer-in-charge |
| 47 | Providing 12mm thick cement plaster (1:6) over brick work including cost, conveyance & royalty of all materilas etc. |
| 48 | Providing 16mm thick cement plaster (1:6) over brick work including cost, conveyance & royalty of all materilas etc. |
| 49 | Supplying, fitting & fixing of 35mm thick M.S.Grill Window & Door (Shutter) with M.S.Grill & Iron fittings fixed in proper position for window & shutter including all cost , labour & materials T&P etc. all complete as per direction of EIC.V = 2*0.61*0.61=0.74 @ 1.5Kg/Sqm |
| 50 | Supplying all materials ,labour,T&P fitting ,fixing of PVC Door with hinges,aldrops and locking arrangement etc all complete |
| 51 | Fixing Tiles in floors or steps & landing on 25mm. thick bed of cement mortar (1:1) jointed with neat cement slurry mixed with pigment to match the shades of the tiles all complete with cost of precast tiles conveyance, royalty, taxes of all materials, cost of all labour, T&P etc. complete as per direction of the Engineer-in-charge |
| 52 | Fixing Tiles to dados skirting & risers of steps on 12mm. thick C.P (1:3) jointed with neat cement slurry mixed with pigments to match the shade of tiles all complete with cost of precast tiles conveyance, royalty, taxes of all materials, cost of all labour, T&P etc. complete as per direction of the Engineer-in-charge |
| 53 | Priming one coat with any approved wall primer including cost of all labour ,materials T&P with taxes ,transportation etc all complete( Wall primer) |
| 54 | Providing Distemper two coat with approved quality and shade over piastered surface with brush including cleaning the surface watering curing ,cost of paint ,taxes,labour charges T & p etc complete as per the direction of engineer in charge. |
| 55 | Providing weather coat two coats with approved quality and shade over piastered surface with brush including cleaning the surface watering curing ,cost of paint ,taxes,labour charges T & p etc complete as per the direction of engineer in charge. |
| 56 | Painting two coats of enamel paint over a coat of primer to iron works as per approved quality over a coat of primer sand papering polishing the surface including cost, conveyance taxes of all materials cost of all labour T&P etc as required for the work complete in all floors as per direction of the Engineer-in-charge. (Paint and primer will be supplied by the contractor). |
| 57 | Providing ,fitting & fixing aluminium door with anodized allluminium door section of 9202 as vertical member ,9201 as top member & 9200 as bottom & middle member with frame section no. 9221 and tapper clip no. 4660 and the frame to be completed by means of joining angle No. 1855 including cost of labour, T & P hire charges of drilling machine, labour charges etc. complete . |
| 58 | Suplying all materials,Labour,T&P ,fitting,fixing of Laying of 110 mm OD PVC Pipes in trenches Including Earthwork in Excavation etc all complete.(13492) |
| 59 | 110mm dia P.V.C. SWR D/J with door |
| 60 | 110mm diaP.V.C. SWR door bend 87.5' |
| 61 | 110mm diaP.V.C. SWR.pipe clip |
| 62 | 110mm dia P.V.C. SWR P Trap |
| 63 | 110 mm dia P.V.C. SWR Vent Cowl |
| 64 | Supplying all materials, labour and T&P for construction of inspection chamber as per P.H. specification and design all complete. |
| 65 | Suplying all materials,Labour,T&P ,fitting,fixing of Laying of 110 mm OD PVC Pipes in trenches Including Earthwork in Excavation etc all complete.(13492) |
| 66 | Suplying all materials,Labour,T&P ,fitting,fixing of Wall or ceiling with PVC Pipe with ASTMD-1785(Schedule-80) of the following nominal size including cost and carriage etc all complete.20mm dia PVC Pipe |
| 67 | 25mm dia. ASTM PVC Pipe |
| 68 | 15mm dia. G.I. Pipe |
| 69 | Suplying all materials,Labour,T&P ,fitting,fixing of Brass or Gun Metal Full Way Valve |
| 70 | Supplying all materials, labour and T&P for construction of 1.20mtr.dia.x1.50mtr. Deep soak-way pit with dry brick walling up to 1.10mtr. height and brick work with cement mortar (1:6) for 0.45mtr. height of wall at top,cement plaster (1:3) inside and outside,inside filled with dry brick khoa of 50mm.to 100mm.size to a height of 2.00mtr.from bottom, covered by means of 40mm.thick R.C.C. perforated slab,50mm.thick R.C.C.well cover in pieces fitted with iron rings including earth work in excavation and refilling of cavity around the pit etc. all complete as per approved design and drawing. |
| 71 | Fixing Rotational moulded polyethylene cylindrical vertical water storage tanks conforming to IS : 12701--1996 including cutting holes through the tank and fixing mild steel tubes and fittings and providing extra sockets and jam nuts, fixing ball valve etc, including hoisting upto a height of 5 metres above ground level and placing the tank to the required position etc all complete as per specification and direction of the Engineer in charge |
| 72 | Fixing water closet, squatting pan (Indian type W.C pan) conforming to IS 2556 : Part 3-2004 duly embedded in cement concrete (1:4:8) using hard granite metal 4cm nominal size all complete as per specification(580 mm x 440mm size white glazed Vitreous China Orissa Pattern squatting pan(22748)) |
| 73 | Supplying of all materials,labour,T&P for fixing 10 Ltrs capacity PVC Low Level cistern with a pair of PVC brackets complete with fitting such as siphonic arrangement ,15 mm nominal size brass/PVC ball valve with ploythene float chromium plated brass handle,unions and couplings for connection with inlet,outlet and overflow pipes,32 mm dia PVC long flush bend ,12 mm dia PVC inlet connection pipe,15 mm dia CP Angle stop cock including cutting holes and making good the same and connecting the flush bend with cistern and closet and inlet pipe with supply main etc all complete as per specification and direction of Engineer-in-charge. |
| 74 | Supplying of all materials,labour,T&P for fixing wash hand basin with hole for pillar cock with cast iron/M.S. brackets painted white including cutting holes in walls and making good to the damages etc all complete as per specification and direction of Engineer-in-charge. BASIN |
| 75 | Basin Pedestral |
| 76 | Basin Bracket |
| 77 | Fixing of Angle stop cock capstan head screw down,high pressure,lettered with long screws,shanks and back nuts of the following nominal bore as per specification and direction of Engineer-in-charge. |
| 78 | Fixing of Short Body Bib Cock capstan head screw down,high pressure,lettered hot &cold with long screws,shanks and back nuts of the following nominal bore as per specification and direction of Engineer-in-charge. |
| 79 | Fixing of Long Body Bib Cock capstan head screw down,high pressure,lettered hot &cold with long screws,shanks and back nuts of the following nominal bore as per specification and direction of Engineer-in-charge. |
| 80 | Providing and fixing Stainless Steel A ISI 304 (18/8) kitchen sink as per IS 13983 with C.I brackets and stainless steel plug 40 mm, including painting of fittings and brackets, cutting and making good the walls wherever required(23635) |
| 81 | Fixing of pillar cock capstan head screw down,high pressure,lettered with long screws,shanks and back nuts of the following nominal bore as per specification and direction of Engineer-in-charge. |
| 82 | 15mm dia c.p.angular stop cock |
| 83 | 15mm dia c.p.Conseal stop cock |
| 84 | Frammed Mirrior |
| 85 | Supplying fitting and fixing of 1Hp Mono Block pump with all acessories including cost of all materials and labour etc complete. |
| 86 | Sign Board & Photograph Please Enable Macros to View BoQ information |
