|
| 1 | Dismantling doors, windows and clerestory windows (steel or wood) shutter including chowkhats, architrave, holdfasts etc. complete and stacking within 50 metres lead Of area beyond 3 sq. metres complete as directed by the Engineer-in-charge including entire carriage of materials within all leads, lifts and other incidentals. |
| 2 | Repairs to plaster in patches of 2.50 Sq.M. and under and 10 to 15mm thick including cutting the patch in proper shape and replastering the surface of the wall Including disposal of rubbish to the dumping ground within a Lead of 20 metres with:- Cement Mortar 1:6 (1 Cement : 6 Sand) complete as directed by the Engineer-in-charge including entire carriage of materials within all leads, lifts and other incidentals. |
| 3 | Providing and fining 5.5 mm thickglass panes with putty and glazing clips in steel doors, windows, clerestory windows complete as directed by the Engineer-in-charge including entire carriage of materials within all leads, lifts and other incidentals. |
| 4 | Providing and fixing Stainless steel Road for pelmet grade 304, curtain rod 25 mm dia 1.20mm thick complete as directed by the Engineer-in-charge including entire carriage of materials within all leads, lifts and other incidentals. |
| 5 | Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level 1:3:6 (1 Cement : 3 coarse sand) : 6 graded stone aggregate 20 mm nominal size) complete as directed by the Engineer-in-charge including entire carriage of materials within all leads, lifts and other incidentals. |
| 6 | Providing and fixing aluminium work for doors, windows, ventilators and partitions frame with extruded built up standard tubular sections/ appropriate Z sections and other sections of approved make conforming to IS: 733 and IS: 1285, fixing with dash fasteners of required dia and size, including necessary filling up the gaps at junctions, i.e. at top, bottom and sides with required EPDM rubber/ neoprene gasket etc. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, Aluminium snap beading for glazing / paneling, C.P. brass / stainless steel screws, all complete as per architectural drawings and the directions of Engineer-incharge. (Glazing, paneling and dash fasteners to be paid for separately) : Anodised aluminium (anodised transparent or dyed to required shade according to IS: 1868, Minimum anodic coating of grade AC 15) complete as directed by the Engineer-in-charge including entire carriage of materials within all leads, lifts and other incidentals. |
| 7 | Providing and fixing aluminium work for doors, windows, ventilators and partitions with extruded built up standard tubular sections/ appropriate Z sections and other sections of approved make conforming to IS: 733 and IS: 1285, fixing with dash fasteners of required dia and size, including necessary filling up the gaps at junctions, i.e. at top, bottom and sides with required EPDM rubber/ neoprene gasket etc. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, Aluminium snap beading for glazing / paneling, C.P. brass / stainless steel screws, all complete as per architectural drawings and the directions of Engineer-incharge. (Glazing, paneling and dash fasteners to be paid for separately) : For shutters of doors, windows & ventilators including providing and fixing hinges/ pivots and making provision for fixing of fittings wherever required including the cost of EPDM rubber / neoprene gasket required (Fittings shall be paid for separately) Anodised aluminium (anodised transparent or dyed to required shade according to IS: 1868, Minimum anodic coating of grade AC15) complete as directed by the Engineer-in-charge including entire carriage of materials within all leads, lifts and other incidentals. |
| 8 | Providing and fixing 250x10mm size aluminium tower bolts (berrel type) anodized trans parent or dyed to required shade and colour with screws etc. complete as directed by the Engineer-in-charge including entire carriage of materials within all leads, lifts and other incidentals. |
| 9 | Providing and fixing 100 mm aluminium handles anodized transparent or dyed to required colour & shade with necessary screws etc. complete as directed by the Engineer-in-charge including entire carriage of materials within all leads, lifts and other incidentals. |
| 10 | Providing and fixing 300x16mm anodized aluminium sliding door bolts anodized transparent or dyed to required colour and shade with necessary screws etc. complete as directed by the Engineer-in-charge including entire carriage of materials within all leads, lifts and other incidentals. |
| 11 | Providing and fixing 50x125x27x2.80mm oxidized M.S. presses parliamentary hinges with necessary screws etc. complete as directed by the Engineer-in-charge including entire carriage of materials within all leads, lifts and other incidentals. |
| 12 | Providing and fixing 12mm (Twelve millimetres) thick prelaminated board both side bwp phenol bonded exterior/interior grade panelled shutters including bright finished/black enamelled iron butt hinges with necessary screws complete as directed by the Engineer-in-charge including entire carriage of materials within all leads, lifts and other incidentals. |
| 13 | Providing and fixing 4 mm thick plain asbestos cement sheet ceiling of approved quality with butt jointing and wood screws (frame work and cover fillets to be measured and paid for separately) complete as directed by the Engineer-in-charge including entire carriage of materials within all leads, lifts and other incidentals. |
| 14 | Providing and fixing wire gauge shutters using galvanized M.S. wire gauge of average width of aperture 1.4 mm in both directions with wire of dia 0.63 mm, for doors, windows and clerestory windows with hinges and necessary screws 35 mm thick shutters Second class teak wood complete as directed by the Engineer-in-charge including entire carriage of materials within all leads, lifts and other incidentals. |
| 15 | Providing and laying water proofing of RCC slab with liquicrete 151 as Acrlic Polymade binding with cement, providing Fibre mesh and liqucrete RTU as Two components Acrylic base Modified cementation water proofing coat system complete and ornamental moulding in side of gutter complete as directed by the Engineer-in-charge including entire carriage of materials within all leads, lifts and other incidentals. |
| 16 | Providing and fixing steel glazed doors,windows and ventilators of standerd rolled steel sections joints mitred and welded with 16x3.15 mm lugs 10 cm.long with wooden plugs and screws or rawl plug and screws or with fixing clips or with bolts and nuts as required and iron fittings,including providing and fixing of glass panes with glazing clips and special metal sesh putty complete as directed by the Engineer-in-charge including entire carriage of materials within all leads, lifts and other incidentals. |
| 17 | Welding of steel window shutter when required complete including complete repair of the window shutter including accessorise of window shutter complete as directed by the Engineer-in-charge including entire carriage of materials within all leads, lifts and other incidentals. |
| 18 | Providing and laying on wall face PVC (D-Plast) rain water working pressure not less than 4.50 kg/sqm (Four decimal Five Zero kilograms per square metre)including filling the joints with approved adhesive complete as directed by the Engineer-in-charge including entire carriage of materials within all leads, lifts and other incidentals. |
| 19 | 75mm (Seventy five millimetres) |
| 20 | 100mm (One hundred millimetres) |
| 21 | Providing and fixing on wall faces PVC (D-Plast) accessories for rain water pipes including filling the joints with approved adhesive complete as directed by the Engineer-in-charge including entire carriage of materials within all leads, lifts and other incidentals. |
| 22 | Providing and fixing 19mm thick Commercial Board water proof shutters for up boards including fixing with nickel plated piano hinges with screws etc. complete as directed by the Engineer-in-charge including entire carriage of materials within all leads, lifts and other incidentals. |
| 23 | Applying priming coat over new wood and wood based surfaces after and including preparing the surfaces of all dirt, dust and other foreign matter and sand papering and knotting with ready mix paint brushing wood primer pink complete as directed by the Engineer-in-charge including entire carriage of materials within all leads, lifts and other incidentals. |
| 24 | Painting two coats (excluding priming coat) on new wood and wood based surface under coat with enamel and finishing coating with flat oil paint, brushing to give an even shade including cleaning of all dirt, dust and other foreign matter, sand papering and stopping with paint other than white complete as directed by the Engineer-in-charge including entire carriage of materials within all leads, lifts and other incidentals. |
| 25 | Providing and fixing 10 litre capacity white P.V.C. low level flushing cistern with manually controlled device (handle lever) conforming to IS : 7231, with all fittings and fixtures complete as directed by the Engineer-in-charge including entire carriage of materials within all leads, lifts and other incidentals. |
| 26 | Providing and fixing 15 mm nominal bore C.P. brass bib cock of approved quality conforming to IS:8931 complete as directed by the Engineer-in-charge including entire carriage of materials within all leads, lifts and other incidentals. |
| 27 | Providing and fixing 15mm nominal bore C.P. brass angle valve for basin mixer and geyser points of approved quality conforming to IS:8931 complete as directed by the Engineer-in-charge including entire carriage of materials within all leads, lifts and other incidentals. |
| 28 | Providing and fixing uplasticised 15 mm nominal bore PVC connection pipe with brass unions complete as directed by the Engineer-in-charge including entire carriage of materials within all leads, lifts and other incidentals. |
| 29 | Providing and fixing 32 mm dia P.V.C. waste pipe for sink or wash basin including P.V.C. waste fittings complete as directed by the Engineer-in-charge including entire carriage of materials within all leads, lifts and other incidentals. |
| 30 | Providing and fixing 100 mm sand cast Iron grating for gully trap complete as directed by the Engineer-in-charge including entire carriage of materials within all leads, lifts and other incidentals. |
| 31 | Providing and fixing 600x450 mm beveled edge mirror of superior glass (of approved quality) complete with 6 mm thick hard board ground fixed to wooden cleats with C.P. brass screws and washers complete as directed by the Engineer-in-charge including entire carriage of materials within all leads, lifts and other incidentals. |
| 32 | Providing and fixing PTMT soap Dish Holder having length of 138mm, breadth 102mm, height of 75mm with concealed fitting arrangements, weighing not less than 106 gms complete as directed by the Engineer-in-charge including entire carriage of materials within all leads, lifts and other incidentals. |
| 33 | Providing and fixing PTMT Towel rail complete with brackets fixed to wooden cleats with CP brass screws with concealed fittings arrangement of approved quality and colour..450 mm long towel rail with total length of 495 mm, 78 mm wide and effective height of 88 mm, weighing not less than 170 gms complete as directed by the Engineer-in-charge including entire carriage of materials within all leads, lifts and other incidentals. |
| 34 | Providing and fixing 300x10 mm aluminium tower bolts, ISI marked, anodised (anodic coating not less than grade AC 10 as per IS : 1868) transparent or dyed to required colour or shade, with necessary screws etc. complete as directed by the Engineer-in-charge including entire carriage of materials within all leads, lifts and other incidentals. |
| 35 | Providing and fixing 15 mm nominal bore C.P. brass long body bib cock of approved quality conforming to IS standards and weighing not less than 690 gms complete as directed by the Engineer-in-charge including entire carriage of materials within all leads, lifts and other incidentals. Please Enable Macros to View BoQ information |
