|
| 1 | E/W in Excavation in ordenery soil in foudation including labour and matrials and T/P with all com. Work Sl No. 251 |
| 2 | C.C. Work in 1:6:12 in cement, fine sand and 40 mm Gauge Brick Ballast including labour and matrials. T/P with all com. Work St No. 273 |
| 3 | M-150 B/W in 1:4in cement and coar sand mortar including labour and matrials, T/P with all com. Work St No.305 |
| 4 | E/W filling in embankment with cartage soil up to 8.00 km distances etc com. |
| 5 | Construction of Granular sub base (GSB) by providing coarse graded material spreading in uniform layers with motor grader on prepared surface, mixing by mix in place method with rotavator at OMC, and compacting with vibratory roller to achieve the desired density, complete as per Clause 401 |
| 6 | Providing of 80 mm thick rubber moulded Zig-Zag interlocking tiles less than 30MPa Red Base1500 MORD Spec. |
| 7 | P/F Colour interlocking tiles with all comp. |
| 8 | 12mm thick Plaster work in 1:3 in cement and fine sand mortar including labour and matrials, T/P with all com. Work Sl No.583 |
| 9 | R.C.C. Work in 1:1.5:3 in cement coarse sand and 20mm gauge including labour and matrials, T/P with all com. Work Sl No.285 |
| 10 | MS work in R.C.C. work including labour and matrials, T/P with all com. Work SI No.504 |
| 11 | P.C.C. Work in 1:2:4 in cement, Coarse sand and 20 mm GaugeStone grit including labour and matrials, T/P with all com. Work Sl No. 279(1) |
| 12 | Providing and laying Polished Granite stone flooring in required design and patterns, in linear as well as curvilinear portions of the building all complete as per the architectural drawings with 18 mm thick stone slab over 20 mm (average) thick base of cement mortar 1:4 (1 cement: 4 coarse sand) laid and jointed with cement slurry and pointing with white |
| 13 | Finishing walls with water proofing cement paint of required shade: 13.44.1 New work (Two or more coats applied @ 3.84 kg/10 sqm) 13.44 |
| 14 | Providing and fixing stainless steel (Grade 304) railing made of Hollow tubes, channels, plates etc., including welding, grinding, buffing, polishing and making curvature (wherever required) and fitting the same with necessary stainless steel nuts and bolts complete, i/c fixing the railing with necessary accessories & |
| 15 | S/F of Cement Concrete Bench( Park Bench) ncluded all comp |
| 16 | High Mast |
| 17 | S/F of Granite Sign Board including labourand matrials T/P with all com. Work. |
| 18 | Add 18% GST Please Enable Macros to View BoQ information |
