Sales : +91-777 804 8217
| Sl. No. | Item Description |
| 1 | Slice No: 1:- Providing Barricading and Protective arrangements to the Strong Room and Counting Centre for 188, Melur Assembly Constituency and 189, Madurai East Assembly Constituency in Tamilnadu Agriculture College at Madurai District |
| 2 | Dismantling, clearing away and carefully stacking materials useful for re-use for any thickness of walls |
| 3 | Brick / stone masonry in Cement mortar walls under 3m high |
| 4 | Brick work in Cement Mortar 1:5 using best quality Burnt Clay Brick of size 8 3/4\\" x 4 1/4\\" x 2 3/4\\" with class designation of 7.5 conforming to IS 1077-1992 for Second floor including Cost of Mortar Plasticizer curing, etc.,complete complying with standard specification and as directed by the departmental officers. Brickwork shall be done as per IS 2212-1991 adopting English Bond generally.other type of bond shall be done as directed by the Executive Engineer in charge. |
| 5 | In Second Floor |
| 6 | Plastering with Cement Mortar 1:5 (One cement and Five Plastering sand), 12mm thick in all floors including mortar plasticizer at 200ml per 50Kg of cement used, curing etc. complete complying with standard specification and as directed by the departmental officers. |
| 7 | Painting Old Plastered Wall Surface with Two finishing coats of ready mixed (Emulsion) of approved quality and colour over the existing wall in all floors etc., complete complying with standard specification and as directed by the departmental officers. (The make, quality and colour of paint should be got approved by the Executive Engineer before use on works.) |
| 8 | Hire charges for supplying and fixing of plywood of 6mm thick for closing the windows, ventilator in storage rooms including cost of nails, screws and labour charges etc., and removing the same after counting is over, for a maximum period of 30 days. |
| 9 | Hire charges for providing barricading arrangements using casurina props of 4\\" to 5\\" dia upto 12 ft height. The spacing between vertical post are being 0.90 m and horizotal post being 0.90m with 0.50 m overlap on either sides and cross braces at required interval etc. in complete shape using coir and nails and as directed by the Departmental Officers. The rate inclusive of labour charges for fixing, transportation of required material, removing the same after completion of specified work for a maximum period of 30 days |
| 10 | Hire charges for Providing Weld mesh partition arrangements using Weld mesh 7.5 x 2.5cm. 10 Gauge with outer frames and M.S. angles of size 35x35x5mm for the outer frames stiffeners with 32 x 6mm M.S flat is provided at 90cm intervals for Counting hall partition and way partition etc., including cost of nails, screws, binding wire and labour charges etc., and removing the same after counting is over, for a maximum period of 30 days. |
| 11 | Hire Charges for GI sheet partition for closing the windows, ventilators etc., and storage room outside, including cost of labour charges casurina props and nails etc., complete for a maximum period of 30 days. |
| 12 | Hire Charges for wooden dias for platform to a height of 0.60m for stage with 40mm country wood planks even surface using runners of country wood joist of size 8x6cm with strutting complete as directed by the departmental officers for a maximum period of 30 days |
| 13 | Hire charges for providing Red carpet arrangements using best quality for VIP stage & VIP area in pandal and removing the same after the function is over etc., complete complying with standard specifications and as directed by the departmental officers etc., complete for a maximum period of 30 days. |
| 14 | Hire charges for providing White Curtain cloth using best quality for counting hall and VIP stage area etc., complete and removing the same after the function is over etc., complete complying with standard specifications and as directed by the departmental officers etc., complete for a maximum period of 30 days. |
| 15 | Engaging labour for shifting the furniture, repairing and cleaning etc., and redoing the same as directed by the departmental officers. |
| 16 | Mazdoor II class |
| 17 | Carpender II class |
| 18 | Plumber II class |
| 19 | Hire charges for providing container box of size 1.20m x 1.20m made of MS angle for outer frame of size 20 x 20 x 3mm and intermediate MS flat of size 20mm x 3mm at 5 sides of the MS angle for a Maximum Period of 30 days |
| 20 | Hire Charges for providing Step Arrangements to a width of 1.50m and to a Required height for access .The Step arrangements is being made of steel outer frame with 40mm thick country wood for a Maximum period of 30 days. |
| 21 | Hire Charges for Counting hall Chairs without arm including cost of conveyence, loading and unloding charges etc., complete for a Maximum period of 30 days. |
| 22 | Hire Charges for Counting hall Tables of size 0.90m x 0.60m using 25mm MS square pipe and Top finished with water proof laminated board including cost of fixing, conveyence, loading and unloding charges etc., complete for a Maximum period of 30 days. |
| 23 | Hire charges for supplying and fixing of \\"S\\" type Chairs including loading and unloding, labour charges and Conveyence charges etc, for a Maximum period of 30 days. |
| 24 | Supply and fixing of stored pressure ABC (Mono Ammonium Phospate) Powder Type Fire Extinguisher of 6 kg. capacity as per IS:15683 with pressure gauge, discharge hose & control nozzle, wall mounting bracket, safety clip etc., including conveyance, all incidental charges, neccessary scaffolding and re-doing the dismantled portions to its original condition wherever found neccessary etc, complete as per standard specification and as directed by the Departmental Officers. |
| 25 | Supply and fixing of Carbon-di-Oxide Gas Type 2 kg. capacity Fire Extinguisher as per New IS15683, complete with control valve, discharge hose with horn, wall mounting bracket, safety clip etc., including conveyance, all incidental charges, neccessary scaffolding and redoing the dismantled portions to its original condition wherever found neccessary etc., complete as per standard specification and as directed by the Departmental Officers |
| 26 | Hire charges for Bench including cost of transportation and placing, labour for loading unloding charges and removing the same after counting is over etc., complete for a Maximum period of 30 days. |
| 27 | Paving the floor with Vinyl Flooring of 2mm thick etc., Complete Complying with Standard Specification |
| 28 | Supplying and Fixing Door Aldrops of 250 mm long and 16mm dia with required screws,bolts and nuts with standard specification and as directed by the departmental officers. |
| 29 | Hire charges for Steel Racks including Labour charges for placing the Steel Racks, transportation, Loading and unloading charges and removing the same after counting is over etc., complete for a Maximum period of 30 days. |
| 30 | Fabricating Supplying and fixing in position of Aluminium anodised natural colour matt finish 1/3rd fixed glazing 2/3rd prelaminated board of Aluminium partition of size 3.50 x 2.88m. The outer frames Outer frame: 63.50x38x3mm@ 1.72 kg/m,Centre mullions: 63.50x38x3mm@ 1.55 kg/m,Alu. Clips: 17.27x17.15x1.50mm @ 0.175kg/mg/m for intermediate vertical mullion 90cm c/c. Horizontal mullion at 1.00m 2.10m covered with 5.5mm thick plain glass with neccessary aluminium clips of size 17.27x17.15 x1.50mm @ 0.176kg/m and with required rubber beading etc., including necessary dismantling holes in RCC column,masonry wherever in necessary with power drills to the extent required and made good the damaged portion in good condition after fixing etc... complete complying with standard specification and as directed by the deparmental officers. All the aluminium sections should be anodised not less than 15 microns as ISI specification 1868/1962 and should be got approved by Executive Engineer before use |
| 31 | Slice No: 2:- Providing Barricading and Protective arrangements in Counting Hall and Strong Room for 190, Solavanthan (SC) Legislative Assembly Constituency and 197, Usilamapatti Legislative Assembly in Anna University at Madurai District |
| 32 | Dismantling, clearing away and carefully stacking materials useful for re-use for any thickness of walls |
| 33 | Brick / stone masonry in Cement mortar walls under 3m high |
| 34 | Brick work in Cement Mortar 1:5 using best quality Burnt Clay Brick of size 8 3/4\\" x 4 1/4\\" x 2 3/4\\" with class designation of 7.5 conforming to IS 1077-1992 for Ground floor including Cost of Mortar Plasticizer curing, etc.,complete complying with standard specification and as directed by the departmental officers. Brickwork shall be done as per IS 2212-1991 adopting English Bond generally.other type of bond shall be done as directed by the Executive Engineer in charge. |
| 35 | In Ground Floor |
| 36 | Plastering with Cement Mortar 1:5 (One cement and Five Plastering sand), 12mm thick in all floors including mortar plasticizer at 200ml per 50Kg of cement used, curing etc. complete complying with standard specification and as directed by the departmental officers. |
| 37 | Hire charges for supplying and fixing of plywood of 6mm thick for closing the windows, ventilator in storage rooms including cost of nails, screws and labour charges etc., and removing the same after counting is over, for a maximum period of 30 days. |
| 38 | Hire charges for providing barricading arrangements using casurina props of 4\\" to 5\\" dia upto 12 ft height. The spacing between vertical post are being 0.90 m and horizotal post being 0.90m with 0.50 m overlap on either sides and cross braces at required interval etc. in complete shape using coir and nails and as directed by the Departmental Officers. The rate inclusive of labour charges for fixing, transportation of required material, removing the same after completion of specified work for a maximum period of 30 days |
| 39 | Hire charges for Providing Weld mesh partition arrangements using Weld mesh 7.5 x 2.5cm. 10 Gauge with outer frames and M.S. angles of size 35x35x5mm for the outer frames stiffeners with 32 x 6mm M.S flat is provided at 90cm intervals for Counting hall partition and way partition etc., including cost of nails, screws, binding wire and labour charges etc., and removing the same after counting is over, for a maximum period of 30 days. |
| 40 | Hire Charges for GI sheet partition for closing the windows, ventilators etc., and storage room outside, including cost of labour charges casurina props and nails etc., complete for a maximum period of 30 days. |
| 41 | Hire charges for providing White Curtain cloth using best quality for counting hall and VIP stage area etc., complete and removing the same after the function is over etc., complete complying with standard specifications and as directed by the departmental officers etc., complete. for a maximum period of 30 days. |
| 42 | Painting Old Plastered Wall Surface with Two finishing coats of ready mixed (Emulsion) of approved quality and colour over the existing wall in all floors etc., complete complying with standard specification and as directed by the departmental officers. (The make, quality and colour of paint should be got approved by the Executive Engineer before use on works.) |
| 43 | Hire Charges for wooden dias for platform to a height of 0.60m for stage with 40mm country wood planks even surface using runners of country wood joist of size 8x6cm with strutting complete as directed by the departmental officers for a maximum period of 30 days |
| 44 | Hire charges for providing Red carpet arrangements using best quality for VIP stage & VIP area in pandal and removing the same after the function is over etc., complete complying with standard specifications and as directed by the departmental officers etc., complete. for a maximum period of 30 days. |
| 45 | Engaging labour for shifting the furniture, repairing and cleaning etc., and redoing the same as directed by the departmental officers. |
| 46 | Mazdoor II class |
| 47 | Carpender II class |
| 48 | Hire charges for providing container box of size 1.20m x 1.20m made of MS angle for outer frame of size 20 x 20 x 3mm and intermediate MS flat of size 20mm x 3mm at 5 sides of the MS angle for a Maximum Period of 30 days |
| 49 | Hire Charges for providing Step Arrangements to a width of 1.50m and to a Required height for access .The Step arrangements is being made of steel outer frame with 40mm thick country wood for a Maximum period of 30 days. |
| 50 | Hire Charges for Counting hall Chairs without arm including cost of conveyence, loading and unloding charges etc., complete for a Maximum period of 30 days. |
| 51 | Hire Charges for Counting hall Tables of size 0.90m x 0.60m using 25mm MS square pipe and Top finished with water proof laminated board including cost of fixing, conveyence, loading and unloding charges etc., complete for a Maximum period of 30 days. |
| 52 | Hire charges for supplying and fixing of \\"S\\" type Chairs including loading and unloding, labour charges and Conveyence charges etc, for a Maximum period of 30 days. |
| 53 | Supply and fixing of stored pressure ABC (Mono Ammonium Phospate) Powder Type Fire Extinguisher of 6 kg. capacity as per IS:15683 with pressure gauge, discharge hose & control nozzle, wall mounting bracket, safety clip etc., including conveyance, all incidental charges, neccessary scaffolding and re-doing the dismantled portions to its original condition wherever found neccessary etc, complete as per standard specification and as directed by the Departmental Officers. |
| 54 | Supply and fixing of Carbon-di-Oxide Gas Type 2 kg. capacity Fire Extinguisher as per New IS15683, complete with control valve, discharge hose with horn, wall mounting bracket, safety clip etc., including conveyance, all incidental charges, neccessary scaffolding and redoing the dismantled portions to its original condition wherever found neccessary etc., complete as per standard specification and as directed by the Departmental Officers |
| 55 | Hire charges for Bench, including cost of transportation and placing, labours for loading unloding charges and removing the same after counting is over etc., complete for a Maximum period of 30 days. |
| 56 | Slice No: 3:- Providing Barricading and Protective arrangements to the storage room and counting centre for 191, Madurai North Assembly & 192, Madurai South Assembly Constituency in Thiyagarajar Engineering College at Madurai District |
| 57 | Dismantling, clearing away and carefully stacking materials for reuse of the following. Any thickness of : |
| 58 | Brick/ Stone masonry in cement mortar walls under 3m high |
| 59 | Brick work in Cement Mortar 1:5 using best quality Burnt Clay Brick of size 8 3/4\\" x 4 1/4\\" x 2 3/4\\" with class designation of 7.5 conforming to IS 1077-1992 for Ground floor including Cost of Mortar Plasticizer curing, etc.,complete complying with standard specification and as directed by the departmental officers. Brickwork shall be done as per IS 2212-1991 adopting English Bond generally.other type of bond shall be done as directed by the Executive Engineer in charge. |
| 60 | In Ground Floor |
| 61 | Plastering with Cement Mortar 1:5 (One cement and Five Plastering sand), 12mm thick in all floors including mortar plasticizer at 200ml per 50Kg of cement used, curing etc. complete complying with standard specification and as directed by the departmental officers. |
| 62 | Painting Old Plastered Wall Surface with Two finishing coats of ready mixed (Emulsion) of approved quality and colour over the existing wall in all floors etc., complete complying with standard specification and as directed by the departmental officers. (The make, quality and colour of paint should be got approved by the Executive Engineer before use on works.) |
| 63 | Hire charges for supplying and fixing of plywood of 6mm thick for closing the windows, ventilator in storage rooms including cost of nails, screws and labour charges etc., and removing the same after counting is over, for a maximum period of 30 days. |
| 64 | Hire charges for providing barricading arrangements using casurina props of 4\\" to 5\\" dia upto 12 ft height. The spacing between vertical post are being 0.90 m and horizotal post being 0.90m with 0.50 m overlap on either sides and cross braces at required interval etc. in complete shape using coir and nails and as directed by the Departmental Officers. The rate inclusive of labour charges for fixing, transportation of required material, removing the same after completion of specified work for a maximum period of 30 days |
| 65 | Hire charges for Providing Weld mesh partition arrangements using Weld mesh 7.5 x 2.5cm. 10 Gauge with outer frames and M.S. angles of size 35x35x5mm for the outer frames stiffeners with 32 x 6mm M.S flat is provided at 90cm intervals for Counting hall partition and way partition etc., including cost of nails, screws, binding wire and labour charges etc., and removing the same after counting is over, for a maximum period of 30 days. |
| 66 | Hire Charges for GI sheet partition for closing the windows, ventilators etc., and storage room outside including cost of labour charges casurina props and nails etc., complete for a maximum period of 30 days. |
| 67 | Hire Charges for wooden dias for platform to a height of 0.60m for stage with 40mm country wood planks even surface using runners of country wood joist of size 8x6cm with strutting complete as directed by the departmental officers for a maximum period of 30 days. |
| 68 | Hire charges for providing Red carpet arrangements using best quality for VIP stage & VIP area in pandal and removing the same after the function is over etc., complete complying with standard specifications and as directed by the departmental officers etc., complete for a maximum period of 30 days. |
| 69 | Hire charges for providing White Curtain cloth using best quality for counting hall and VIP stage area etc., complete and removing the same after the function is over etc., complete complying with standard specifications and as directed by the departmental officers etc., complete. for a maximum period of 30 days. |
| 70 | Engaging labour for shifting the furniture, repairing and cleaning etc., and redoing the same as directed by the departmental officers. |
| 71 | Mazdoor II class |
| 72 | Carpender II class |
| 73 | Hire charges for providing container box of size 1.20m x 1.20m made of MS angle for outer frame of size 20 x 20 x 3mm and intermediate MS flat of size 20mm x 3mm at 5 sides of the MS angle for a Maximum Period of 30 days |
| 74 | Hire Charges for providing Step Arrangements to a width of 1.50m and to a Required height for access .The Step arrangements is being made of steel outer frame with 40mm thick country wood for a Maximum period of 30 days. |
| 75 | Hire Charges for Counting hall Chairs without arm including cost of conveyence, loading and unloding charges etc., complete for a Maximum period of 30 days. |
| 76 | Hire Charges for Counting hall Tables of size 0.90m x 0.60m using 25mm MS square pipe and Top finished with water proof laminated board including cost of fixing, conveyence, loading and unloding charges etc., complete for a Maximum period of 30 days. |
| 77 | Hire charges for supplying and fixing of \\"S\\" type Chairs including loading and unloding, labour charges and Conveyence charges etc, for a Maximum period of 30 days. |
| 78 | Supply and fixing of stored pressure ABC (Mono Ammonium Phospate) Powder Type Fire Extinguisher of 6 kg. capacity as per IS:15683 with pressure gauge, discharge hose & control nozzle, wall mounting bracket, safety clip etc., including conveyance, all incidental charges, neccessary scaffolding and re-doing the dismantled portions to its original condition wherever found neccessary etc, complete as per standard specification and as directed by the Departmental Officers. |
| 79 | Supply and fixing of Carbon-di-Oxide Gas Type 2 kg. capacity Fire Extinguisher as per New IS15683, complete with control valve, discharge hose with horn, wall mounting bracket, safety clip etc., including conveyance, all incidental charges, neccessary scaffolding and redoing the dismantled portions to its original condition wherever found neccessary etc., complete as per standard specification and as directed by the Departmental Officers |
| 80 | Hire charges for Bench including cost of transportation and placing, labours for loading, unloding charges and removing the same after counting is over etc., complete for a Maximum period of 30 days. |
| 81 | Supplying and Fixing Door Aldrops of 250 mm long and 16mm dia with required screws,bolts and nuts with standard specification and as directed by the departmental officers. |
| 82 | Slice No: 4:- Providing Barricading and Protective arrangements to the Strong Room and Counting Centre for 193, Madurai Central Assembly Constituency and 194, Madurai West Assembly Constituency of Madura college at Madurai District. |
| 83 | Dismantling, clearing away and carefully stacking materials useful for re-use for any thickness of walls. |
| 84 | Brick / Stone Masonry in cement mortar walls under 3m high |
| 85 | Brick work in Cement Mortar 1:5 using best quality Burnt Clay Brick of size 8 3/4\\" x 4 1/4\\" x 2 3/4\\" with class designation of 7.5 conforming to IS 1077-1992 for Ground floor including Cost of Mortar Plasticizer curing, etc.,complete complying with standard specification and as directed by the departmental officers. Brickwork shall be done as per IS 2212-1991 adopting English Bond generally.other type of bond shall be done as directed by the Executive Engineer in charge. |
| 86 | In Ground Floor |
| 87 | Plastering with Cement Mortar 1:5 (One cement and Five Plastering sand), 12mm thick in all floors including mortar plasticizer at 200ml per 50Kg of cement used, curing etc. complete complying with standard specification and as directed by the departmental officers. |
| 88 | Painting Old Plastered Wall Surface with Two finishing coats of ready mixed (Emulsion) of approved quality and colour over the existing wall in all floors etc., complete complying with standard specification and as directed by the departmental officers. (The make, quality and colour of paint should be got approved by the Executive Engineer before use on works.) |
| 89 | Hire charges for supplying and fixing of plywood of 6mm thick for closing the windows, ventilator in storage rooms including cost of nails, screws and labour charges etc., and removing the same after counting is over, for a maximum period of 30 days. |
| 90 | Hire charges for providing barricading arrangements using casurina props of 4\\" to 5\\" dia upto 12 ft height. The spacing between vertical post are being 0.90 m and horizotal post being 0.90m with 0.50 m overlap on either sides and cross braces at required interval etc. in complete shape using coir and nails and as directed by the Departmental Officers. The rate inclusive of labour charges for fixing, transportation of required material, removing the same after completion of specified work for a maximum period of 30 days |
| 91 | Hire charges for Providing Weld mesh partition arrangements using Weld mesh 7.5 x 2.5cm. 10 Gauge with outer frames and M.S. angles of size 35x35x5mm for the outer frames stiffeners with 32 x 6mm M.S flat is provided at 90cm intervals for Counting hall partition and way partition etc., including cost of nails, screws, binding wire and labour charges etc., and removing the same after counting is over, for a maximum period of 30 days. |
| 92 | Hire Charges for GI sheet partition for closing the windows, ventilators etc., and storage room outside, including cost of labour charges casurina props and nails etc., complete for a maximum period of 30 days. |
| 93 | Hire Charges for wooden dias for platform to a height of 0.60m for stage with 40mm country wood planks even surface using runners of country wood joist of size 8x6cm with strutting complete as directed by the departmental officers for a maximum period of 30 days |
| 94 | Hire charges for providing Red carpet arrangements using best quality for VIP stage & VIP area in pandal and removing the same after the function is over etc., complete complying with standard specifications and as directed by the departmental officers etc., complete for a maximum period of 30 days. |
| 95 | Hire charges for providing White Curtain cloth using best quality for counting hall and VIP stage area etc., complete and removing the same after the function is over etc., complete complying with standard specifications and as directed by the departmental officers etc., complete for a maximum period of 30 days. |
| 96 | Engaging labour for shifting the furniture, repairing and cleaning etc., and redoing the same as directed by the departmental officers. |
| 97 | Mazdoor II class |
| 98 | Carpender II class |
| 99 | Hire charges for providing container box of size 1.20m x 1.20m made of MS angle for outer frame of size 20 x 20 x 3mm and intermediate MS flat of size 20mm x 3mm at 5 sides of the MS angle for a Maximum Period of 30 days |
| 100 | Hire Charges for providing Step Arrangements to a width of 1.50m and to a Required height for access .The Step arrangements is being made of steel outer frame with 40mm thick country wood for a Maximum period of 30 days. |
| 101 | Hire Charges for Counting hall Chairs without arm including cost of conveyence, loading and unloding charges etc., complete for a Maximum period of 30 days. |
| 102 | Hire Charges for Counting hall Tables of size 0.90m x 0.60m using 25mm MS square pipe and Top finished with water proof laminated board including cost of fixing, conveyence, loading and unloding charges etc., complete for a Maximum period of 30 days. |
| 103 | Hire charges for supplying and fixing of \\"S\\" type Chairs including loading and unloding, labour charges and Conveyence charges etc, for a Maximum period of 30 days. |
| 104 | Supply and fixing of stored pressure ABC (Mono Ammonium Phospate) Powder Type Fire Extinguisher of 6 kg. capacity as per IS:15683 with pressure gauge, discharge hose & control nozzle, wall mounting bracket, safety clip etc., including conveyance, all incidental charges, neccessary scaffolding and re-doing the dismantled portions to its original condition wherever found neccessary etc, complete as per standard specification and as directed by the Departmental Officers. |
| 105 | Supply and fixing of Carbon-di-Oxide Gas Type 2 kg. capacity Fire Extinguisher as per New IS15683, complete with control valve, discharge hose with horn, wall mounting bracket, safety clip etc., including conveyance, all incidental charges, neccessary scaffolding and redoing the dismantled portions to its original condition wherever found neccessary etc., complete as per standard specification and as directed by the Departmental Officers |
| 106 | Hire charges for Bench, including cost of transportation and placing, labours for loading unloding charges and removing the same after counting is over etc., complete for a Maximum period of 30 days. |
| 107 | Supplying and Fixing Door Aldrops of 250 mm long and 16mm dia with required screws,bolts and nuts with standard specification and as directed by the departmental officers. |
| 108 | Slice No: 5:- Providing Barricading and Protective arrangements in Counting Hall and Strong Room for 195, Thiruparankundram Legislative Assembly Constituency and 196, Thirumanagalam Legislative Assembly Constituency in Govt.Arts and Science College at Thirumangalam in Madurai District. |
| 109 | Dismantling, clearing away and carefully stacking materials useful for re-use for any thickness of walls |
| 110 | Brick / stone masonry in Cement mortar walls under 3m high |
| 111 | Dismantling RCC by manual / by using deploying machineries |
| 112 | Floor finish & dadooing walls in cement mortar with Mosaic Tiles / Glazed Tiles / Clay Tiles / Cuddapah Slabs |
| 113 | Brick work in Cement Mortar 1:5 using best quality Burnt Clay Brick of size 8 3/4\\" x 4 1/4\\" x 2 3/4\\" with class designation of 7.5 conforming to IS 1077-1992 for First floor including Cost of Mortar Plasticizer curing, etc.,complete complying with standard specification and as directed by the departmental officers. Brickwork shall be done as per IS 2212-1991 adopting English Bond generally.other type of bond shall be done as directed by the Executive Engineer in charge. |
| 114 | In First Floor |
| 115 | Brick partition walls of 10.80cm thickness using best quality Burnt Clay Brick of size 8-3/4\\" x 4-1/4\\" x 2-3/4\\" with class designation of 7.5 conforming to IS 1077-1992 in Cement Mortar 1:3 (One Cement and Three CS Sand) using hoop iron reinforcement if found necessary including Cost of Mortar Plasticizer, curing etc. complete complying with standard specification and as directed by the departmental officers. (Hoop iron reinforcement will be measured and paid for separately) |
| 116 | In First Floor |
| 117 | Supplying and erecting centering for plane surfaces such as RCC Floor Slab, Roof Slab, Loft, Landing Slabs, etc with necessary supports and strutting upto 3.60m height in all floors with all cross bracings using MS Sheets made of 10 gauge thick welded with MS angle of Size 25mm x 25mm x 3mm for boarding laid over steel adjustable span of size 2m x 2m (expandable upto 3.60m) and supported by Steel Adjustable Telescopic Props of Size 2m x 2m (expandable upto 3.60m) made with outer steel pipe with dia 50mm (3.60mm thick) and inner steel pipe with dia 40mm (2.90mm thick) , etc complete complying with standard specifications. Steel adjustable span and Steel Adjustable telescopic props shall be provided as directed by the departmental Officers. (Payment for centering shall be given after the concrete is laid). |
| 118 | Providing and laying in position, standardised concrete Mix M-20 Grade by insitu machine mix concrete adopting weighing batch method in accordance with IS 456 using 20mm and down graded hard broken granite stone jelly for all RCC items of works with minimum cement content of 325 kg/m3 and maximum water cement ratio of 0.55, including admixture (plasticiser / super plasticiser) in recommended proportions as per IS:9103 to accelerate, retard setting of concrete, improve workability without impairing strength and durability with about (5 cu.m.) 7730 kg. of 20mm machine crushed stone jelly and with about (3.3 cu.m.) 5156 kg. of 10-12mm machine crushed stone jelly and with about (4.79 cu.m) 7670 kg. of crushed stone sand, but excluding cost of reinforcement grill and fabricating charges, centering and shuttering and also including laying, vibrating with mechanical vibrators, finishing, curing, etc. and providing fixtures like fan clamps in the RCC floor/ roof slabs wherever necessary without claiming extra, etc., complete complying with standard specification and as directed by the departmental officers. The coarse and fine aggregates to be used should comply with the requirements of IS standards. (No separate payment will be made by the Department for the excess usage of materials). |
| 119 | In First Floor |
| 120 | Supplying, fabricating and placing in position Mild Steel / Ribbed Tor Steel reinforcement grills of all variety like HYSD/CTD/TMTand all grade like Fe 500, Fe550D, Fe 500 D etc., for all RCC works as per design given including cost of steel reinforcement and G.I. binding wire, wastage etc. complete complying with standard specification and as directed by the departmental officers.(Contractor has to make his own arrangements for the supply of steel reinforcement and binding wire) (SD -168) |
| 121 | In First Floor |
| 122 | Supplying and fixing fine polished cuddapah slab of following thickness for cup-board arrangements including laying to correct alignment with necessary cement mortar and black powder etc, complete complying with standard specification and as directed by the departmental officers 38 / 40mm thick |
| 123 | Plastering with Cement Mortar 1:5 (One cement and Five Plastering sand), 12mm thick in all floors including mortar plasticizer at 200ml per 50Kg of cement used, curing etc. complete complying with standard specification and as directed by the departmental officers. |
| 124 | Hire charges for supplying and fixing of plywood of 6mm thick for closing the windows, ventilator in storage rooms including cost of nails, screws and labour charges etc., and removing the same after counting is over, for a maximum period of 30 days. |
| 125 | Hire charges for providing barricading arrangements using casurina props of 4\\" to 5\\" dia upto 12 ft height. The spacing between vertical post are being 0.90 m and horizotal post being 0.90m with 0.50 m overlap on either sides and cross braces at required interval etc. in complete shape using coir and nails and as directed by the Departmental Officers. The rate inclusive of labour charges for fixing, transportation of required material, removing the same after completion of specified work for a maximum period of 30 days |
| 126 | Hire charges for Providing Weld mesh partition arrangements using Weld mesh 7.5 x 2.5cm. 10 Gauge with outer frames and M.S. angles of size 35x35x5mm for the outer frames stiffeners with 32 x 6mm M.S flat is provided at 90cm intervals for Counting hall partition and way partition etc., including cost of nails, screws, binding wire and labour charges etc., and removing the same after counting is over, for a maximum period of 30 days. |
| 127 | Hire Charges for GI sheet partition for closing the windows, ventilators etc., and storage room outside including cost of labour charges casurina props and nails etc., complete for a maximum period of 30 days. |
| 128 | Hire charges for providing White Curtain cloth using best quality for counting hall and VIP stage area etc., complete and removing the same after the function is over etc., complete complying with standard specifications and as directed by the departmental officers etc., complete. for a maximum period of 30 days. |
| 129 | Painting Old Plastered Wall Surface with Two finishing coats of ready mixed (Emulsion) of approved quality and colour over the existing wall in all floors etc., complete complying with standard specification and as directed by the departmental officers. (The make, quality and colour of paint should be got approved by the Executive Engineer before use on works.) |
| 130 | Hire Charges for wooden dias for platform to a height of 0.60m for stage with 40mm country wood planks even surface using runners of country wood joist of size 8x6cm with strutting complete as directed by the departmental officers for a maximum period of 30 days. |
| 131 | Hire charges for providing Red carpet arrangements using best quality for VIP stage & VIP area in pandal and removing the same after the function is over etc., complete complying with standard specifications and as directed by the departmental officers etc., complete for a maximum period of 30 days. |
| 132 | Engaging labour for shifting the furniture, repairing and cleaning etc., and redoing the same as directed by the departmental officers. |
| 133 | Mazdoor II class |
| 134 | Carpender II class |
| 135 | Hire charges for providing container box of size 1.20m x 1.20m made of MS angle for outer frame of size 20 x 20 x 3mm and intermediate MS flat of size 20mm x 3mm at 5 sides of the MS angle for a Maximum Period of 30 days |
| 136 | Hire Charges for providing Step Arrangements to a width of 1.50m and to a Required height for access .The Step arrangements is being made of steel outer frame with 40mm thick country wood for a Maximum period of 30 days. |
| 137 | Hire Charges for Counting hall Chairs without arm including cost of conveyence, loading and unloding charges etc., complete for a Maximum period of 30 days. |
| 138 | Hire Charges for Counting hall Tables of size 0.90m x 0.60m using 25mm MS square pipe and Top finished with water proof laminated board including cost of fixing, conveyence, loading and unloding charges etc., complete for a Maximum period of 30 days. |
| 139 | Hire charges for supplying and fixing of \\"S\\" type Chairs including loading and unloding, labour charges and Conveyence charges etc, for a Maximum period of 30 days. |
| 140 | Supply and fixing of stored pressure ABC (Mono Ammonium Phospate) Powder Type Fire Extinguisher of 6 kg. capacity as per IS:15683 with pressure gauge, discharge hose & control nozzle, wall mounting bracket, safety clip etc., including conveyance, all incidental charges, neccessary scaffolding and re-doing the dismantled portions to its original condition wherever found neccessary etc, complete as per standard specification and as directed by the Departmental Officers. |
| 141 | Supply and fixing of Carbon-di-Oxide Gas Type 2 kg. capacity Fire Extinguisher as per New IS15683, complete with control valve, discharge hose with horn, wall mounting bracket, safety clip etc., including conveyance, all incidental charges, neccessary scaffolding and redoing the dismantled portions to its original condition wherever found neccessary etc., complete as per standard specification and as directed by the Departmental Officers |
| 142 | Hire charges for Bench, including cost of transportation and placing, labours for loading unloding charges and removing the same after counting is over etc., complete for a Maximum period of 30 days. |
| 143 | GST 18 % Please Enable Macros to View BoQ information |
| SR No | FileName | File Description |
| 1 | Click here to download tender document | Tender Documents |
| 2 | Click here to download tender document | Tender Documents |
| 3 | Click here to download tender document | Tender Documents |
| 4 | Click here to download tender document | Tender Documents |
Copyright © 2026 · All Rights Reserved. Terms of Usage | Privacy Policy
For Tender Information Services Visit : TenderDetail