|
| 1 | Demolition of cement concrete (unreinforced) in ground floors and pavings n.exc 15cm thickness (below or above ground level) complete all as specified and directed. |
| 2 | M&L for 75 mm thick PCC 1:3:6 type C-1 (using 20 mm graded crushed stone aggregate) as in plinth protection surface finished even and smooth without using extra cement of width as directed and shall be laid to slope of 1:30 in alternative bays not exceeding 3 meter in length. Joints of 6 mm wide and 10 mm deep shall be provided along the wall and bays and same shall be filled with bitumen mastic (1:3) complete all as specified and directed. |
| 3 | M&L 75 mm thick plain cement concrete 1:3:6 type C-2 using 40 mm graded crushed stone aggregate as in Sub base of floor, surface finish even and rough to receive topping layer complete all as specified and directed. |
| 4 | M & L for 40mm thick PCC 1:2:4 type B-1 (using 20 mm graded crushed stone aggregate) as in floor finishing surface even and smooth finish topping layer complete all as specified and directed. |
| 5 | S&F of plastic dividing strips 1.5 mm thick and width of strip 38 mm inserted in position complete all as specified and directed. |
| 6 | M & L for machine cut Kota Stone slab 20 to 25 mm thick laid over and including 20mm thick screed bed in CM 1:6, laid and jointed with grey cement slurry mixed with pigment to match of the slab as in floor including rubbing and polishing complete all as specified and directed. |
| 7 | M & L for machine cut Kota Stone slab 20 to 25 mm thick laid over and including 10mm thick screed bed in CM 1:4, laid and jointed with grey cement slurry mixed with pigment to match of the slab as in skirting, riser of step including rubbing and polishing complete all as specified and directed. |
| 8 | Dismantling floor hearth or wall tiling including cement mortar bedding (but not backing) removing serviceable tiles from site & rubbish off the premises complete all as specified and directed. |
| 9 | M&L for joint free glazed ceramic coloured tiles of size 350 X 250 / 450 X 300 mm & 6 to 7 mm thick on vertical surface of walls such as in dado, skirting etc; including and jointing in neat cement slurry and pointed in white cement mixed with pigment to match with shade of tiles, including 10mm thick rendering in CM (1:4) on brick wall complete all as specified and directed. |
| 10 | M&L for 7 to 8 mm thick joint free ceramic coloured tiles (square/ rectangular) area of each tile exceeding 0.18 Sqm but not exceeding 0.38 Sqm as in floors laid jointing in neat cement slurry and pointed in white cement mixed with pigment to match with shade of tiles over and including 15 mm thick screed bed in CM (1:6) complete all as specified and directed. |
| 11 | M&L for 7 to 8 mm thick joint free ceramic coloured tiles (square/ rectangular) area of each tile exceeding 0.18 Sqm but not exceeding 0.38 Sqm as in skirting/dado including jointing in neat cement slurry and pointed in white cement mixed with pigment to match with shade of tiles over and including 10 mm thick rendering in CM (1:4) complete all as specified and directed. |
| 12 | Taking down roof trusses, coupled rafters or trussed beams above 4 meters up to 8 meters complete all as specified and directed. |
| 13 | Taking down roof trusses, coupled rafters or trussed beams above 8 meters up to 15 meters complete all as specified and directed. |
| 14 | Dismantling of unframed work timber scantlings 40 sq. cm and over in section, in any position complete all as specified and as directed. |
| 15 | Dismantling of wrought iron or mild steel work of any description not otherwise provided for complete all as specified and directed. |
| 16 | M&L Roof trusses (framed), trussed, purlins, crane gantries, rails and fastenings and heavy bracket framing (Beam, tee, angle, channel or flat sections) including distance pieces, cleats etc conforming to Fe 410 W (Gde-E-250) quality A complete all as specified and as directed. |
| 17 | M&L for preparation of old steel surfaces and applying one coats of synthetic enamel paint o n.exc 10cm width or girth complete all as specified and as directed. |
| 18 | M&L for Plates (Plain or chequered ) channels, square cut or notched (ordinary and counter sunk ) forming holes, without any attachment , rolled mild steel Fe - 410-W (Gde-E-250) quality \\"A\\" complete all as specified and as directed. |
| 19 | M&L for Mild steel screw bolts (machine made ) diameter of shank 16 mm to 20 mm with hexagonal or square heads at one end and screwed the other, or screwed both ends, each screwed end to be fitted with washers and one hexagonal or square nut length of bolt exc 22.5cm and n exc 30 cm long complete all as specified and as directed. |
| 20 | Dismantling of Asbestos cement (corrugated, semi corrugated, etc.) sheets in roof coverings complete all as specified and directed. |
| 21 | Dismantling of Plain or corrugated steel sheeting, any gauge, thickness, including Nainital or similar pattern roof coverings complete all as specified and directed. |
| 22 | S & F of Pre- painted galvalume aluminum zinc coating GI based profile sheet TCT with gsm -150 sheet 0.50mm thick of any colour total mass coating 150gms/sqm (both side) and having tensile strength of 550 Mpa as in roof covering/cladding to wall/window chajja, fixed with self tapping screws complete all as specified and directed. |
| 23 | S & F Pre- painted galvalume aluminum zinc coating GI based plain steel TCT with gsm -150 sheet 0.50mm thick of an colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws complete all as specified and directed. |
| 24 | S&F of 2mm thick Fibre glass reinforced translucent corrugated sheeting with two corru-gation side lap fixed with coach screw and washer in roof walls omplete all as specified and directed. |
| 25 | Dismantling of Wall and ceiling boards (fibre, pulp, insulation, etc.), or insulation boards /slabs / blankets, any thickness, including cover fillets complete all as specified and directed. |
| 26 | S&F of GI frame work for seamless ceiling comprising of GI perimeter channel 0.55 mm thick with two unequal flanges of 20 and 30 mm and web of 27 mm fixed to surrounding wall using nylon sleeves and screws at 450 mm centre to centre, intermediate channel 0.9 mm thick having two equal flanges of 15 mm each and web of 45 mm suspended from soffit at approx 900 mm centre to centre with Gl cleat and steel expansion fasteners with and including ceiling section (not exc 1.2 m length) of 0.55 mm thickness having kurled web of 50 mm and flange of 26 mm each with lips of 10.5 mm fixed to the intermediate channel with connecting clips across the intermediate channel at 457 mm centre to centre complete all as specified and directed. |
| 27 | M&L for 4mm thick Non asbestos fibre cement building designer boards fixed in ceiling or laid/ inserted to timber/GI/Aluminium frame work with screws omplete all as specified and directed. |
| 28 | Taking down in cement or cement lime plaster any description, on brick or stone wall etc. including raking out joints hacking for key, scrubbing down with water etc complete all as specified and directed. |
| 29 | M&L for 10 to 12 mm thick smart care ready mix repair rendering/plaster with high quality polymer adhesive and well graded sand and fillers which can be used for plastering (as per manufacturer instruction) over interior surface of wall complete all as specified and di-rected. |
| 30 | Material & labour for preparation of new surfaces of finished walls and applying Two or more coats of 100% Premium acrylic emulsion paint having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance, dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives @ 1.43 litre/ 10 sqm over and including priming coat of exterior primer applied @ 0.90 litre/ 10 sqm complete all as specified and directed. Note- Primer and emulsion to be carried out through air less spray machine with Mechanical meansThe work for periodical services shall include the following and the rates quoted by the bidder shall include the same.(aa) The work pertaining to periodical services shall be executed by the contractor as per MoU from authorized applicator through manufacturer of the materials like Exterior emulsion paint, putty etc. after approval by the GE.(ab) The contractor shall upload with the documents under cover-I \\"Memorandum of Understanding\\"(MoU)with at least one of the manufacturers mentioned in the contract, failing which the bid shall be liable to be rejected. |
| 31 | M&L for complete removal of existing treatment with mechanical device of old plaster surface of wall and preparation of old plastered of finished walls and applying Two or more coats of 100% Premium acrylic emulsion paint having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance, dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives @ 1.43 litre/ 10 sqm over and including priming coat of exterior primer applied @ 0.90 litre/ 10 sqm complete all as specified and directed. Note- Primer and emulsion to be carried out through air less spray machine with Mechanical meansThe work for periodical services shall include the following and the rates quoted by the bidder shall include the same.(aa) The work pertaining to periodical services shall be executed by the contractor as per MoU from authorized applicator through manufacturer of the materials like Exterior emulsion paint, putty etc. after approval by the GE.(ab) The contractor shall upload with the documents under cover-I \\"Memorandum of Understanding\\"(MoU)with at least one of the manufacturers mentioned in the contract, failing which the bid shall be liable to be rejected. |
| 32 | M & L for preparation of newly plastered surfaces of walls applying 2 coats of oil bound distemper over coat of wall care putty 1 mm thickness. The paint will be applied through airless spray technology with max working pressure of 3300 PSI by Trucare Graco machine / Airless paint sprayer (Vands Engineering solutions) / Airless sprayer machine Surya 9 (Jaguar) / Control Pro 190 Air paint sprayer (Wagner) and capable of operational single spray gun with a maximum materials hose length 150m working, complete all as specified and directed. |
| 33 | M & L for preparation of old plastered surfaces of walls applying 2 coats of oil bound distemper over coat of wall care putty 1 mm thickness. The paint will be applied through airless spray technology with max working pressure of 3300 PSI by Trucare Graco machine / Airless paint sprayer (Vands Engineering solutions) / Airless sprayer machine Surya 9 (Jaguar) / Control Pro 190 Air paint sprayer (Wagner) and capable of operational single spray gun with a maximum materials hose length 150m working, complete all as specified and directed. |
| 34 | M&L for new plastered surface of wall and applying three coat of white wash complete all as specified and directed. |
| 35 | M&L for old plastered surfaceof wall and applying two coat of white wash complete all as specified and directed. |
| 36 | M&L for Framed work as in doors or gates of angle or other section with gusset plates, rails, braces, etc., complete, drilled for fixing of steel sheeting or other covering. Doors, etc. of Fe-410-W(GdeE-250) quality B to be prepared for hanging or sliding with and including either hooks and hinges or steel hanging door fittings (exclusive of steel sheeting or other covering, running rails and guides) and hanging; also fastening and fixing complete all as specified and directed. |
| 37 | S&F in repair 1.00 MM thick Mild steel, plain black sheet in wall cladding, steel gates and similar work, cut to size, holes punched; including round headed screws, clout nails or rivets and fixed to wood or steel framing with plain 40 mm lap joints with riveted or welded seams, including bending or turning up, mitred as in garage gates and ventilators chhaja's complete all as specified and directed. |
| 38 | Taking down chowkhat or frames with shutter (without taking of shutters from the frame) area not exceeding 1.5 sqm complete with hold fast etc including making good dismantled portion by brickwork, concrete (1:2:4 type B-0) or plastering in CM 1:3 complete all as specified and as directed. |
| 39 | Dismantling structural steel work including doors, gates but excluding framed truss etc complete all as specified and as directed. |
| 40 | M&L for 3 mm thick plain sheet glass ordinary quality in repair including glazing with putty area n.exc 0.5 sqm in each pane complete all as specified and directed. |
| 41 | M&L for 3 mm thick frosted glass ordinary quality in repair including glazing with putty area n.exc 0.5 sqm in each pane complete all as specified and directed. |
| 42 | S&F for stainless steel wire cloth, 0.36 mm nominal dia of wire and average width of aperture 1.40mm and fixed with stainless steel wire, staples complete all as specified and directed. |
| 43 | S & F Factory made wire gauged PVC door shutter 30 mm thick (style) consisting of frame made out of M.S. tubes for top & bottom rails. M.S. frame shall be covered with heat moulded decorative type/wood grain printed colour PVC ‘C’ channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and wood grain printed PVC sheet for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail; wire gauzed i.e. panel will be of wire gauze in lieu of wood grain printed PVC sheet panel. The wire gauze shall be wrapped on an additional square 8mm M.S. Solid tube and this tube shall be welded to M.S. tubes. The wire gauge shall be stretched to tighten firmly of wood grain printed colour PVC sheet to be fitted in the M.S. frame welded / sealed to the stiles & rails with suitable 5mm thick x15mm wide PVC sheet beading used inside stiles and rails and decorative PVC beading of 10mm x 10mm (900) used instead of exposed portion of PVC sheet beading and joined together with solvent cement, suppling & fixing in the frame at site complete all as specified and directed. |
| 44 | M&L for Solid PVC Door Frame of size 50mm x 47mm made out of 5mm wood grain printed PVC sheet instead of plain colour PVC sheet reinforced with M.S. Square tube shown on drawing as per manufacturer specification complete all as specified and directed. |
| 45 | S & F 100 mm long medium weight , cold rolled mild steel butt hinges complete all as specified and directed. |
| 46 | S&F 125 mm long aluminium anodised hasp and staple, safety type inculding bolt to hinge plate and fixed and screws complete all as specified and directed. |
| 47 | M & L 150mm long aluminium anodised handles flush type complete all as specified and directed. |
| 48 | S&F in repair stainless steel curtain rods of 25mm dia as in doors/ windows pelmets.SS brackets fancy type ,including screws and other necessary fitting(knob) for fixing brackets SS Funnels for 25 mm dia dropry rods, fixed at each end of rods complete all as specified and directed. |
| 49 | Taking up or down 15 mm dia steel/GI tubing and connection including removal of fittings of any type and material complete and all as specified and directed. |
| 50 | M & L for GI tubing medium grade 15 mm dia galvanised with all fitting laid in trenches or laid under floors, fixed to walls with and including MS clamp etc complete all as specified and directed. |
| 51 | M & L for GI tubing medium grade 20 mm dia galvanised with all fitting laid in trenches or laid under floors, fixed to walls with and including MS clamp etc complete all as specified and directed. |
| 52 | S & F in repair 15mm bore bib tap long body, fancy type chromium plated screwed down high pressure, with crutch or butterfly handle screwed both ends for iron pipe or for brass ferule and fixed complete all as specified and directed. |
| 53 | S&F in repair Pillar taps 15mm bore, half/quarter turn, fancy type, long body, cast copper alloy, with capstan head, chromium plated, screwed down high pressure, with or without lettered 'Hot' or 'Cold' with long screwed shanks and fly-nuts, screwed for iron pipe including all accessories complete all as specified and directed. |
| 54 | S & F in repair 15mm bore angular stop valve/angle valve chromium plated screwed down high pressure, with crutch or butterfly handle screwed both ends for iron pipe or for unions and fixed complete all as specified and directed. |
| 55 | S & F in repair 15mm bore stop valves, fancy type chromium plated with long shank and cup (concealed type) screwed down high pressure, with crutch or butterfly handle screwed both ends for iron pipe or for unions and fixed complete all as specified and directed. |
| 56 | S&F in repair 600mmx450mm bevelled edge mirror of selected quality glass, mounted on 6mm think AC building board or commercial plywood and fixed to wooden plugs with chromium plated brass screws and cup washers complete all as specified and directed. |
| 57 | S & F in repairs Tubular Towel Rail 20mm dia. 'D' type, 600mm long of CP fixed with and including Chromimum plated brass screws and wooden/plastic cleats complete all as specified and directed. |
| 58 | S&F in repair chromium plated box type toilet paper holder fancy complete all as specified and directed. |
| 59 | S&F soap dish chromium plated complete all as specified and directed. |
| 60 | S&F 15 mm dia & 1m long flexible SS braided cord health faucet including chromium plated wall hook fixed to wall complete all as specified and directed. |
| 61 | S&F in repair 10 ltrs capacity low level PVC dual flushing cistern, valveless, syphonic type, white,with inlet,ball float and handle including brackets and flush pipe complete and all as specified and directed. |
| 62 | S&F in repairs WC squatting pan “Orissa Pattern” of size 580 x 440 mm white with integral foot rest (excluding flushing cistern & flush pipe) including connection to trap and to flush pipes etc and lime concrete bedding complete all as specified in SSR and including S&F trap set complete all as specified and directed. |
| 63 | S&F in repair Vitreous China wash down water closet pan (pedestal pattern) white including fixing bolts, seat cover and flush pipe 'P' and 'S' trap, including connection to trap and flushing pipe , antisyphonage pipe etc including provision of PCC (1:5:10) type E2 in filling, making good to floor complete all as specified and directed. |
| 64 | S&F in repair vitreous china Wash hand basin with pedestal white, flat back type of size 550x400mm including a pair of cast iron brackets embedded in PCC 1:3:6 type C1 blocks of size 10X7.5X15cm, 32mm dia PVC waste pipe and 32mm bore chromium plated brass waste coupling with long screwed shanks and fly nuts, flange end bedded in red lead cement and other end fixed.(excluding tap, waste chain & plug) complete all as specified and directed. |
| 65 | S & F in repairs 15mm bore, fancy type shower rose, 200x200 mm size chromium plated complete all as specified and directed. |
| 66 | S&F in repair 100mm square stainless steel grating with openable flap complete all as specified and directed. |
| 67 | S&F in repair 15mm bore PVC connection 600mm long heavy duty with brass fly nut and washer for hot and cold water complete and all as specified and directed. |
| 68 | S&F waste coupling of CP (half or full threaded) of 32mm bore suitable for wash hand basin complete and all as specified and directed. |
| 69 | S&F 32 mm dia PVC waste pipe for wash basin/sinks complete all as specified and directed. Please Enable Macros to View BoQ information |
| 70 | S&F 32 mm dia PVC waste pipe for wash basin/sinks complete all as specified and directed. Please Enable Macros to View BoQ information |
