|
| 1 | Dismantling of Plain or corrugated steel sheeting, any gauge, thickness, including Nainital or similar pattern roof coverings complete all as specified and directed by Engineer-in-Charge. |
| 2 | Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing) with and including removing rubbish material from building and thrown in low lying empty area complete all as specified and as directed by Engineer-in-charge. |
| 3 | Dismantling of Wall and ceiling boards (fibre, pulp, insulation, etc.) or insulation boards/slabs/ blankets, any thickness, including cover fillets complete all as specified and directed by Engineer-in-Charge. |
| 4 | Dismantling timber scantlings (unframed) in fillets, rails, posts, rafters, purlins, etc. under 40 sq. cm in section In framed work complete all as specified and directed by Engineer-in-Charge. |
| 5 | Supply & Fixing Pre- painted galvalume aluminum zinc coating GI based corrugated steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws complete all as specified and as directed by Engineer-in-Charge. |
| 6 | Supply & Fixing Pre-painted galvalume aluminum zinc coating GI based Plain steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws complete all as specified and as directed by Engineer-in-Charge. |
| 7 | Material and Labour for Vitrified Ceramic tiles light shade 10 mm thick (square/rectangular) polished, (shade as approved by Engineer-in-charge ) , area of each tiles exceeding 0.36 sqm but not exceeding 0.42 sqm, in floors etc. set and jointed in neat cement slurry @ 3.00Kg per Sqm and pointed in white or coloured/ shade cement to match the colour / shade of tiles , laid over with and including 15mm thick screed bed in cement mortar 1:4 complete all as specified and directed by Engineer-in-Charge. |
| 8 | Material and Labour for Vitrified Ceramic tiles light shade 10 mm thick (square/rectangular) polished, (shade as approved by Engineer-in-charge ) , area of each tiles exceeding 0.36 Sqm but not exceeding 0.42 Sqm, in vertical surfaces etc. set and jointed in neat cement slurry @ 3.00Kg per Sqm and pointed in white or coloured cement to match the colour / shade of tiles , laid over with and including 10mm thick rendering in cement mortar 1:4 complete all as specified and directed by Engineer-in-Charge. |
| 9 | Material and Labour for 2nd class Soft wood Plain fillets square, rectangular or triangular in section, clean sawn, secured with nails or brads sizes exc 13 sqcm but n exc 25 sqcm in sectional area complete all as specified and as directed by Engineer-in-Charge. |
| 10 | Supply and fixing 4mm thick Veneered decorative plywood, grade 1 (with BWR resin) with decorative face veneers on both faces; fixed with screws to timber frame work on ceiling complete all as specified and directed by Engineer-in-Charge. |
| 11 | Supply and fixing 4mm thick Veneered decorative plywood, grade 1 (with BWR resin) with decorative face veneers on both faces; fixed with screws to timber frame work on Wall panelling complete all as specified and directed by Engineer-in-Charge. |
| 12 | Material and Labour for 2nd class soft wood Plain fillets square, rectangular or triangular in section, clean sawn, secured with nails or brads sizes exc 6 sqcm but n exc 13 sqcm in sectional area complete all as specified and as directed by Engineer-in-Charge. |
| 13 | Material and Labour for 2nd class soft wood Plain fillets square, rectangular or triangular in section, clean sawn, secured with nails or brads sizes n exc 03 sqcm in sectional area complete all as specified and as directed by Engineer-in-Charge. |
| 14 | Supply and fixing ceramic floor mounted english type western water closet single piece of size 640mm x 350mm x 770mm rectangular in size, complete all as specified and as directed by Engineer-in-Charge. |
| 15 | Supply and fixing Solid PVC Wall Lining consisting of 5mm thick Plain colour PVC sheet inclusive of solvent cement and fixing at site on PVC frame as per specifications and drawing complete all as specified and as directed by Engineer-in-Charge. |
| 16 | Supply and fixing 5mm thick PVC sheet fillet of width 35mm for wall paneling inclusive of fixing on to wall to make PVC Frame as per specification and drawing complete all as specified and as directed by Engineer-in-Charge. |
| 17 | Supply and fixing in repair 25mm thick boarding in floor and skirting planed one side & edges tongued and grooved or rebated, and fixed with nails complete all as specified and as directed by Engineer-In-Charge. |
| 18 | Supply and fixing Liquid soap container of PTMT fixed with and including Chromium plated brass screws and wooden/plastic cleats. (Minimum weight 105gms) complete all as specified and as directed by Engineer-in-Charge. |
| 19 | Supply and fixing in repairs 15mm dia Brass CP mixer for mixing hot & cold water screwed down for iron pipe and fixed complete all as specified and as directed by Engineer-in-Charge. |
| 20 | Material and Labour including preparation of old decorative wall surface with complete removal of existing treatment and applying applying Two or more coats of 100% Premium acrylic emulsion paint having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance, dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives @ 1.43 litre/ 10 sqm over and including priming coat of exterior primer applied @ 0.90 litre/ 10 sqm over and including plaster of paris putty of 2 mm thickness over plastered surface to prepare the surface even and smooth complete all as specified and as directed by Engineer-in-Charge. |
| 21 | Material and Labour including preparation of old decorative wall surface with complete removal of existing treatment and Distempering with 1st quality acrylic distemper (ready mixed) having VOC content less than 50 gms/litre, of approved manufacturer, of required shade and colour complete, as per manufacturer's specification. Two or more coats over and including plaster of paris putty of 2 mm thickness over plastered surface to prepare the surface even and smooth complete all as specified and as directed by Engineer-in-Charge. |
| 22 | Note:- The contract sum shall be calculated by deducting the amount shown in Credit Schedule attached to this tender from total amount of Schedule 'A'/BOQ Please Enable Macros to View BoQ information |
