|
| 1 | Earth work in excavation by mechanical means (Hydraulic Excavator )/ manual means in foundation trenches or drains (not exceeding 1.5 m in width or 10 sqm on plan) including dressing of sides and ramming of bottoms, lift upto 1.5 m, including taking out the excavated soil and depositing and refilling of jhiri with watering & ramming and disposal of surplus excavated soil as directed with in a lead of 50 meter. All kinds of soils |
| 2 | Providing and laying in position cement concrete including curing, compaction etc. complete in specified grade excluding the cost of centering and shuttering - All work up to plinth level. M10 grade Nominal Mix 1: 3: 6 (1 cement : 3 coarse sand : 6 graded stone aggregate 20mm nominal size). |
| 3 | Providing and laying in position specified grade of cement concrete for all RCC structural elements upto plinth level including curing, compaction, finishing with rendering in cement sand mortar 1:3 (1 cement: 3 coarse sand) and making good the joints and cost of plastizers( if required) excluding the cost of centering, shuttering and reinforcement. M20 grade Nominal Mix / Design Mix |
| 4 | Centering and Shuttering with plywood or steel sheets including strutting, propping bracing both ways and removal of formwork for foundation , footings, strap beam, raft , bases of columns etc. |
| 5 | Providing and fabricating reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding (including cost of binding wire) all complete up to floor five level. ('Original producers' who manufacture billet directly from iron ores and roll the bilets to produce steel conforming to IS:1786) |
| 6 | Random Rubble stone masonry for with hard stone in foundation and plinth in Cement Sand mortar above 30 CM thick wall in:Cement mortar 1 : 6 (1 cement : 6 coarse sand) |
| 7 | Plaster on new surface on walls in cement sand mortar 1:4 including racking of joints etc. complete fine finish :20mm thick . |
| 8 | Providing and applying plaster of paris putty of 2 mm thickness over plastered surface to prepare the surface even and smooth complete |
| 9 | Finishing walls with Acrylic Smooth exterior paint of required shade including all scaffolding. New work (Two or more coat applied @ 1.67 ltr/10 sqm over and including base coat of water proofing cement paint applied @ 2.20 kg/ 10 sqm ). |
| 10 | S/F of following outdoor Gym (fitness) Equipment including excavation of foundation in all kind of soil/hard roack. construction of foundation as per requirement of Gym Equipment or atleast 0.40x0.40x0.60m size in RCC M-20 mix or as per direction of engineer in charge. Gym equipment should be as per enclosed drawing and design in special conditions folowing make Kilkari/Regal/Arihant/Arogyam. |
| 11 | Double Bar:Features : -H-4'6\\", L-6'6\\", W-3'-4 Inch Dia. Galvanized Steel Pipe-Handle 1/1.25 inch Dia. M.S. PipePowder Coated 100-110 microns |
| 12 | Sit Up Board:Features : -H-3'9\\", L-4'6\\", W-2'1\\"-4 Inch Dia. Galvanized Steel Pipe-Handle 1/1.25 inch Dia. M.S. PipePowder Coated 100-110 microns |
| 13 | Double Surf Board:Features : -H-4'4\\", L-3'10\\", W-3'2\\"-4 Inch Dia. Galvanized Steel Pipe-Handle 1/1.25 inch Dia. M.S. Pipe-Powder Coated 100-110 microns- FRP Foot Rest |
| 14 | Sky Walker:Features : -H-4'8\\", L-5'1\\", W-1'8\\"-4 Inch Dia. Galvanized Steel Pipe-Handle 1/1.25 inch Dia. M.S. Pipe- Powder Coated 100-110 microns- FRP Seat & Foot Rest |
| 15 | Cross Trainer:Features : -H-5'3\\", L-4'5\\", W-1'11\\"-3 Inch Dia. Galvanized Steel Pipe-Handle 1/1.25 inch Dia. M.S. Pipe- Powder Coated 100-110 microns- FRP Seat & Foot Rest |
| 16 | Shoulder Builder Triple:Features : -H-6'3\\", L-4'8\\", W-3'6\\"-3 Inch Dia. Galvanized Steel Pipe-Handle 1/1.25 inch Dia. M.S. Pipe- Powder Coated 100-110 microns |
| 17 | Double Twister Seating :Features : -H-4'4\\", L-7'1\\", W-2'2\\"-4 Inch Dia. Galvanized Steel Pipe-Handle 1/1.25 inch Dia. M.S. Pipe- Powder Coated 100-110 microns |
| 18 | Ches Press Double:Features : -H-6'8\\", L-5'5\\", W-2'3\\"-4 Inch Dia. Galvanized Steel Pipe-Handle 1/1.25 inch Dia. M.S. Pipe- Powder Coated 100-110 microns- FRP Seat & Foot Rest |
| 19 | Rower Double:Features : -H-3'8\\", L-7'6\\", W-2'7\\"- 2x2 Inch Square CRCA Pipe-Handle 1/1.25 inch Dia. M.S. Pipe- Powder Coated 100-110 microns- FRP Seat & Foot Rest |
| 20 | Peck Deck Double:Features : -H-6'2\\", L-6'1\\", W-3,2\\"-3 Inch Dia, Galvanized Steel Pipe-Handle 1/1.25 inch Dia. M.S. Pipe- Powder Coated 100-110 microns- FRP Seat & Foot Rest |
| 21 | Leg Press Double:Features : -H-5'8\\", L-6'4\\", W-1'7\\"-4 Inch Dia. Galvanized Steel Pipe-Handle 1/1.25 inch Dia. M.S. Pipe- Powder Coated 100-110 microns- FRP Seat & Foot Rest |
| 22 | Providing and laying in position cement concrete including curing, compaction etc. complete in specified grade excluding the cost of centering and shuttering - All work up to plinth level. M20 grade Nominal Mix 1: 1.5: 3 (1 cement : 1.5 coarse sand : 3 graded stone aggregate 20mm nominal size). Please Enable Macros to View BoQ information |
