|
| 1 | Supplying and fixing rolling shutters of approved make, made of required size M.S. laths, interlocked together through their entire length and jointed together at the end by end locks, mounted on specially designed pipe shaft with brackets, side guides and arrangements for inside and outside locking with push and pull operation complete, including the cost of providing and fixing necessary 27.5 cm long wire springs manufactured from high tensile steel wire of adequate strength conforming to IS: 4454 - part 1 and M.S. top cover of required thickness for rolling shutters. 10.6.1 80x1.25 mm M.S. laths with 1.25 mm thick top cover. |
| 2 | M.S. Grill gate made out of M.S. flat conforming to IS 2062/20006 painted with red oxide primer as pe the design approved. |
| 3 | Providing and fixing ball bearing for rolling shutters. |
| 4 | Painting two coats with approved paint over a coat of primer on new iron work including cost of all materials, labours and T&P required for the work etc. complete. |
| 5 | Fixing Vertified tiles in floors on 25mm thick bed of cement mortar (1:1) jointed with neat cement slurry mixed with pigment to match the shades of the tiles including rubbing & polishing. |
| 6 | Fixing Vertified tiles in dadoes skirting on 12mm thick cement plaster (1:3) jointed with neat cement slurry mixed with pigment to match the shades of the tiles including rubbing & polishing. |
| 7 | First Floor(Head Room) |
| 8 | Brick work with Fly ash bricks (25X12X8)cm. size in F&P in cement mortar (1:6) (for first floor) |
| 9 | R.C.C work of M-20 grade using 20mm and down graded hard granite crusher broken chips including hoisting and laying including centering and shuttering and dismantling them after casting.FIRST FLOOR |
| 10 | Column |
| 11 | Lintel |
| 12 | Roof Beam |
| 13 | Roof Slab |
| 14 | Supplying, fitting, & placing in position HYSD bar reinforcement Considering 1.25 Qtl/cum of concrete |
| 15 | 12mm thick cement plaster (1:6) for brick work including cost of all labour & T&P required for the work etc. complete (first floor) |
| 16 | 16mm thick cement plaster (1:6) for brick work including cost of all labour & T&P required for the work etc. complete (first floor) |
| 17 | 6mm thick cement plaster (1:4) to R.C.C surface finished smooth including closed deep chiping including cost of all materials and T&P required for the work etc. complete. |
| 18 | Wall painting two coats with weather coat of approved shade to give an even shade including cost of paint, all labour T&P required for the work etc. complete. (for ground floor) |
| 19 | Wall painting two coats with plastic Emulsion paint of approved shade including cost of all materials, labours and T&P required for the work etc. complete. |
| 20 | suppyling and fixing of M.S doors and windows |
| 21 | Painting two coats with approved paint over a coat of primer on new iron work including cost of all materials, labours and T&P required for the work etc. complete. |
| 22 | Providing and fixing 2.5 cm thick grading concrete (1:2:2) on roof slab with 6mm size hard granite chips. On new work with adiqute approved water proffing compund, complete as per the direction of engineer in charge. |
| 23 | Ground Floor |
| 24 | First Floor |
| 25 | FirsSupplying,fitting and fixing of Stainless steel of 304 grade in Hand railingt Floor Please Enable Macros to View BoQ information |
