|
| 1 | Earth Work in excavation of foundation in all kinds of soil within the initial lead & lift including dressing & levelling the bed and depositing the excavated materials away from the work site etc, all complete as directed by the Engineer-in-charge. |
| 2 | Earth Work in 2nd Depth (Septic Tank) |
| 3 | Filling foundation & Plinth with Sand well watered & rammed including cost, conveyance and royality of sand etc Complete. |
| 4 | Supplying all labour, materials, T&P for Cement Concrete (1.3:6) in foundation using 4 cm size hard granite Hand Broken metal including cost of materials, royalty & conveyance charges with watering, curing all complete as per direction of Engineer-in-charge. |
| 5 | Supplying all labour materials & T&P for Brick masonary with Fly Asks in Foundation & Plinth having CS not less than 35 kg/Cm2 in Cement Mortar (1:6) including watering and curing esc complete as per direction of Engineer-in-charge. |
| 6 | Supplying all labour, materials, T&P for ReinforcedCement Concrete M0-20 for reinforced cement concrete works in using 12mm to 20 mm size hard granite Crusher Broken chips including cost of materials, royalty & conveyance charges with watering,curing all complete as per direction of Engineer-in-charge) Raft |
| 7 | Plinth Band |
| 8 | Lintel |
| 9 | Chajja |
| 10 | Starecase |
| 11 | Column (GF) |
| 12 | Roof Slab |
| 13 | Column (1st Floor) |
| 14 | Lintel (1st Floor) |
| 15 | Chajja |
| 16 | Roof Slab (1st Floor) |
| 17 | Straightening, cutting, bending and binding, welding and jointing (if necessary) coiled/bent up M.S. rods/Tor Steel/deformed rods etc. including hoisting, placing in position, tying the grills binding with 18 to 20 gauge binding wire required for R.C.C. work including cost, conveyance, taxes of all materials, cost of all labour, T&P etc. as required for the work complete (weight of binding wires will not be considered) as directed by Engineer-in-charge |
| 18 | 1st Floor |
| 19 | Supplying all labour, materials & T&P for Brick masonary with Fly Ash bricks in Superstructure having C.S not less than 35 kg/Cm2 in Cement Mortar (1:6) including watering and curing etc complete as per direction of Engineer-in-charge. (G.F) |
| 20 | Supplying all labour, materials & T&P for Brick masonary with Fly Ash bricks in 1st floor having C.S not less than 35 kg/Cm2 in Cement Mortar (1:6) including watering and curing etc complete as per direction of Engineer-in-charge. |
| 21 | Supplying fitting and fixing Pre cast RCC Jally on ventilator 2.5cm thick to 5cm thick incl. all cost conveyance etc. complete. |
| 22 | 2.5cm thick grading concrete (1:2:2)on roof slab with 6mm. Size on new work crusher broken hard Granite chips including cost of all labour, materials with all taxes, lead, T & P etc all complete. |
| 23 | Supplying, transporting, fitting& fixing M.S. Fabricated Grill Window as per approved specification and direction of Engineer in Charge. |
| 24 | Supplying, fitting and fixing of Stainless steel of 304 grade in hand railing using 50mm dia of 2mm thick circular pipe with Balustrade of size 32mm x 32mm x 2mm @ 0.90mtr. C/C and stainless square pipe bracing of size 32 mm x 32 mm x 2 mm in 3 rows in stair case as per approved design and specification, buffing, polishing etc with cost, conveyance, taxes of all materials, labour, T&P etc. required for the complete in all respect.C/C and stainless square pipe bracing of size case as per approved design and specification, buffing polishing etc with cost, conveyance, taxes of all materials, labour, T&P etc. required for the complete in all respect. |
| 25 | Providing fitting & fixing aluminium door with anodized allluminium door section of 9202 as vertical member 9201 as top member & 9200 as bottom & middle member with frame section no. 9221 and tapper clip no. 4660 and the frame to be completed by means of joining angle No. 1855 including cost of labour, T & Phire charges of drilling machine, labour charges etc. complete. |
| 26 | Supplying fitting, fixing fully glazed aluminum framed openable windows using 15 micron anodized aluminum section 2082 as out section, 9139 as mullion section, 4124 as a shutter section frame with tapered clip of section 4125, aluminum angle, rubber beading. friction stay and handle etc. excluding cost of black glass. |
| 27 | Supplying all materials, labour and T&P for fitting & fixing of WPC doors including cost of materal and labour etc all complete as per specification |
| 28 | Cement concrete (1.2.4) with 12mm size crusher broken hard granite metal including cost of all labour, materials with all taxes, lead, T & P ete all complete. |
| 29 | 12mm thick cement plaster (1:4) over brick work with cement punning for skirting. |
| 30 | Supplying, fitting and fixing vetrifed tile in floors of size 600mm x 600mm of approved make confirming to IS 13755 laid on 20 mm thick cement mortar 1:4 and filling joints with white cement of approved quality including cost of all materials, labour T&P etc required for the work all complete as per direction of Engineer in charge. (For new work only) |
| 31 | Fixing Tiles in floors or steps & landing on 25mm thick bed of cement mortar (1:1) jointed with neat cement slurry mixed with pigment to match the shades of the tiles all complete with cost of precast tiles. |
| 32 | Supplying all labour materials for Fixing Non Digital Wall Tile to dos skirting & risers of steps on 12mm thick CP (1:3) jointed trch neat cement slurry mixed with pigments to match the shade of tiles including rubbing & polishing complete of item of work as per the direction of Engineer in Charge |
| 33 | Supplying all labour, materials & T&P for providing 12mm thick CP in CM (1:6) over smooth surface of brick work etc complete |
| 34 | Supplying all labour, materials & T&P for providing 12mm thick CP in CM (1:6) over smooth surface of brick work etc complete. 1st Floor |
| 35 | Supplying all labour materials & T&P for providing 16mm thick CP in CM (1:6) over smooth surface of brick workGround Floor Toilet |
| 36 | Supplying all labour,materials & T&P for providing 16mm thick CP in CM (1:6) over smooth surface of brick work1st Floor Toilet |
| 37 | Supplying all labour, materials & T&P for providing 6mm thick CP in CM (1:4) over smooth surface of brick work etc complete. |
| 38 | Supplying all labour,materials & T&P for providing 6mm thick CP in CM (1:4) over smooth surface of brick work etc complete. |
| 39 | Finishing walls with water proofing weather coat over a coat of prmer of approved shade including cost conveyance taxes of all materials etc complete. |
| 40 | Providing Wall painting 2 coat with plastic emulsion paint, over a coat of primer of approved shade including cost conveyabce taxes of all materials etc complete. |
| 41 | Dressed seasoned sal wood work framed and fixed (wrought and put up) in trusses, purlines, frames of doors, windows, ventilabours and beams. Door |
| 42 | Painting two coats with approved synthetic Enamel Paint on one coat of Primer including all cost of Paint Primer etc. Complete. |
| 43 | Fixing water closet, squatting pan (Indian type W.C pan) conforming to IS 2556: Part 3-2004 duly embedded in cement concrete (1:4:8) using hard granite metal 4cm nominal size all complete as per specification (22724) |
| 44 | Flat back stall type magnum Urinal |
| 45 | Squatting Urinal(600x355mm) |
| 46 | Fixing wash basins with hole for pillar taps conforming to IS 2556 4-2004 with Cast Iron or MS brackets painted white including Cutting holes in walls and making good the damages etc all complete as per specification. |
| 47 | Fixing pedestal for wash basin complete recessed at the back for the reception of pipes and fittings |
| 48 | Fixing wash kitchen sink conforming to 15 2556 Part 5-1994 with Cast Iron or MS brackets painted white including cutting holes in walls and making good the damages etc all complete as per specification. |
| 49 | Supplying all materials labour, T&P for fitting & fixing U PVC S.W.R pipes(4kg/cm2) and fittings of the following outside diameter including jointing with approved solvent cement by non-heat application method testing as per specification with lead of all materials to site. (i)110mm dia SWR Pipe110 mm OD P.V.C. SWR D/S Pipe (ISI type-B) |
| 50 | 110mm dia P.V.C. SWR P Trap |
| 51 | 110mm dia U. P.V.C door Tee |
| 52 | 110mm diaP.V.C. SWR door bend 87.5 |
| 53 | 110 mm dia P.V.C. SWR plain bend 87.5' |
| 54 | 110mm dia P.V.C. SWR D/J with door |
| 55 | 110mm dia P.V.C clamp |
| 56 | 110mm dia P.V.C.cowl |
| 57 | 110mm dia P.V.C Coupler |
| 58 | (i) 75 mm OD P.V.C. SWR D/S Pipe (ISI type-B) |
| 59 | (ii) 75mm dia U. P.V.C door Tee |
| 60 | (iii) 75mm dia P.V.C. SWR D/J with door |
| 61 | (i) 75mm dia U. P.V.C door bend |
| 62 | (ii) 75mm dia P.V.C Coupler |
| 63 | (iii) 75mm dia P.V.C SWR. Pipe clip |
| 64 | supplying all materiala, Inbour and T&T for construction of inspection chamber as per PH. specification anul design all complete excluding earth work |
| 65 | Supplying all materials, labour and T&P for construction of Construction of Man Hole Chamber-(1.20x0.90m) as per PH specification and design all complete. | excluding earth work) |
| 66 | Supplying all materials, labour and T&P for construction of 1.20mtr dia x1.50mtr. Deep sonk-way pit with dry brick walling up to 1.10mir. height and brick work with cement mortar (16) for 0.45mtr height of wall at top.coment plaster (13) inside and outside, inside filled with dry brick khoa of 50nun to 100eun.size to height of 2.00mtr from bottom, covered by means of 40num. thick RCC perforated slab, 50own. thick R.C.C.well cover in pieces fitted with iron rings including carth work in excavation and refilling of cavity around the pit ete all complete as per approved design and drawing. |
| 67 | KB. brick khoa 4cm. Size, for soak-Pit |
| 68 | Supplying all materials, labour and T&P and fixing to walls.ceiling and floor unplasticized PVC pipes conforming to IS.4985 of Sch-80 the following nominal diameter with fittings and clamps including testing as per specification all complete 25 mm dia PVC Pipe- |
| 69 | 20mm dia PVC Pipe |
| 70 | 15mm dia PVC Pipe |
| 71 | 15mm dia G.L. Pipe |
| 72 | Supplying all materials, labour and T&P for fitting fixing of following types of P.H. Fittings etc. all complete.15mm dia Long Body CP Bib cock |
| 73 | 15mm dia Short Body CP Bib cock |
| 74 | 25mm brass/G.M.F.W. Valve (ISI) |
| 75 | 25 mm PVC Ball Cock with Rod & Ball |
| 76 | 15mm CP 2 in 1 Bib Cock. |
| 77 | 125mm dia C.P Grattings. |
| 78 | 15mm dia CP Conceal stop cock |
| 79 | 15mm dia CP Angle Stop-Cock |
| 80 | Basin Bracket in Pair |
| 81 | Urinal Spreader |
| 82 | (i) 10 ltr PVC low level cistern with fittings. |
| 83 | 32mm PVC Fliush Bend |
| 84 | 15mm dia C.P. pillar cock |
| 85 | C.P towel rail (600 x 20)mm |
| 86 | C.P towel ring. |
| 87 | C.P soap holder/disc. |
| 88 | C.P flange (Big) |
| 89 | C.P Waste. (32mm-5\\" long) |
| 90 | C.P. Glass self with glass |
| 91 | CP Telephonic shower with CP/PVC Flexible Tube with Hook |
| 92 | Framed Mirror |
| 93 | 32mmx 1150mm long PVC waste Pipe |
| 94 | 15mmx60mm PVC connection Pipe. |
| 95 | Supplying all materials labour T&P for Fixing Rotational moulded polyethylene cylindrical vertical water storage tanks conforming to IS: 12701-1996 including cutting holes through the tank and fixing mild steel tubes and fittings and providing extra sockets and jam nuts, fixing ball valve ete, including hoisting upto a height of 5 metres above ground level and placing the tank to the required position etc all complete as per specification and direction of the Engineer in chargeA) 1000 ltr PVC Water Storage Tank- |
| 96 | Extra over item No 3.1.8 for hoisting Rotational moulded polyethylene cylindrical vertical water storage tanks of the following size for every additional height of 5 metres or part thereof |
| 97 | Cutting Hole in 250mm to 375mm thick Brick Wall for taking GL/PVC Pipe and mendig good to damages after completion of Work etc. Complete |
| 98 | Cutting Hole in 250mm to 375mm thick wall thick Brick Wall for taking 110mm/160mm dia PVC Pipe and mendig good to damages after completion of Work etc. Complete |
| 99 | Cutting Groove on Brick Wall for taking Water Supply Pipe line and mendig good to damages after completion of Work. etc. |
| 100 | Removal of unused excavated materials away from work site by means of mechanical means including loading of the materials as work site and depositng the same at suitable places within 5 km from work site as per direction of the engineer in charge |
| 101 | Providing and laying factory made chamferd edge cement concete paver block of required strength, thickness & size/shape made by table Vibrator method to attain superior smooth finish using PU or Equivalent moulds, Laid in required gray colour and Pattern over 50mm thick Compacted bed of Course Sand and proper embending laying of interlocking Paver bolcks into the sand bending layer through vibratory compacting by using plate vibrator, filling joint with fine sand and cutting of paver block as per required size pattern finishing and sweeping extra sand in footpath,park,lawns, drive ways, or light traffic parking and lane/road etc all complete as per manufactures specification and direction of Engg-in-charge 80mm thick C.C. Paver block of M-40 grade with approved colour with approved colour design pattern ete. Complete |
| 102 | 150 MMDIA BORE WELL, Cell-29306,AR(PH).Supplying all materials, labour T&P and setting of boring equipments including Errection of suitable staging for Installation of required size of required T/W, dismentalling and removing the same after completion of the said work including transportaion of the boring equipments cleaning and levelling the site properly as per requirement excavation of the mud pit, channel etc. in all respect as per the direction of the Engineering in-Charge (29308) |
| 103 | Supplying all labour, tools and plants and transporting boring pipes, top casing, grouting pipes, PVC pipes and fittings, PVC well screens, cement bentonite and gravels etc to work sites including loading and unloading etc. complete as per the direction of the Engineer-in-charge |
| 104 | Supplying all labour and T&P for Drilling the Pilot bore not less than 102mm dia without casing pipe in all kinds of soil and rocks for the following depth including the supplying of necessary boring pipe and cutting equipments extra sockets ( whenever required ) etc. and withdrwing the boring pipes washing and keeping the the bore clear and logging if required complete in all respect as per direction of the Engineering in-Charge.A. Drilling 100mm di of pilot borc from 0.00mtr to 75.00mtrs. |
| 105 | Supplying all labour and T&P for Lowering the 300mm dia Casing pipe fitting and fixing in possition and removing the same after completion of work etc. Complete in all respect as per direction of the Engineering in-Charge. |
| 106 | Supplying all labour and T&P for reaming the Pilot bore to the following sizes and depths without casing pipes including with drawing the boring pipes , washing the bore by means to pipe cylinder etc. Complete in all respect as per direction of the Engineering in-Charge.A. Reaming 100mm dia to 150mm dia (from 0.00mtr to 75.00 mirs depth) |
| 107 | Reaming 150mm dia to 200mm dia ( from 0.00mtr to 75.00 mtrs depth) |
| 108 | Reaming 200mm dia to 250mm dia ( from 0.00mtr to 75.00 mtrs depth) |
| 109 | Supplying all labour , T&P and jointing materials and lowering the PVC Casing Pipe ,well screens, Cutter plug fitted and fixed in proper possition and washing and cleaning the bore as per P.H. specification and direction of Engineer in-Charge.A. Lowering 100mm dia PVC Casing pipe (from Omtr to 36.00 mtrs depth) |
| 110 | Supplying all labour and T&P and materials for Cleaning and Developing the Tube Well with Compressor continously washed till clean and adequate discharged is obtained from the Tunbe well including supply and use of necessary equipments and labour complete in all respect as per the direction of Engineer in-Charge. |
| 111 | Supplying all labour and T&P for packing the bore with Washed Gravel or River singles of required sizes ,around well screen and pipes as per specification and direction of Engineer in-Charge. |
| 112 | Collecting, supplying and stacking good Washed Gravel at work site as per specifcation and direction of Engineer in-Charge including all lead ad royality etc. Complete. |
| 113 | Labour for Supplying, fitting and fixing the following pipe and fittings as per P.H. Specification and directon of Engineer in-Charge.A. 150mm dia PVC Well Screen |
| 114 | 100mm dia Cutter Plug |
| 115 | 100mmX 300mm dia G.I. Short piece |
| 116 | Cap Plug |
| 117 | 150mm dia PVC Pipe |
| 118 | Supplying ,installition and commissioning of 1HP Single phase 230 Volt 5oHz submerssible Pump set ( Max. Head-65mtrs, Min Head-39mtrs) suitable for 40mm dia out let etc. complete with transportation, T&P and labour charges as per directionn of Engineer in-Charge. |
| 119 | Supplying and laying of 1.5Sqmm PVC insulated PVC Sheathed twin core Multistrand water proofr Copper Flat Cable (Black) etc.complete with transportation, T&P and labour charges as per directionn of Engineer in-Charge. |
| 120 | Supplying and fixing of 40mm S.D. PVC Pipe etc.complete with transportation, T&P and labour charges as per directionn of Engineer in-Charge. |
| 121 | Supplying, Transporting ,Fitting & Fixing the following accessories as pe specification and direction of Engineer in-Charge. Water Proof Tochen Rope |
| 122 | Tochen Clip |
| 123 | Steel Nipple |
| 124 | Steel Nut & Bolt |
| 125 | 1¼'' M.S. Clamp |
| 126 | Black Tap |
| 127 | M. Seal |
| 128 | 1¼'' dia G.I. Elbow |
| 129 | 1¼'' X 6'' Short Piece |
| 130 | 200mm dia Bore cover Please Enable Macros to View BoQ information |
