|
| 1 | Item No 1:-Excavation in all kind of soil and Soft Murum including boulders upto 0.6 m diameter for canel, seating of embakment, filter belt, catch water drains etc and placing the excavated stuff neatly in dump area etc complete as per specification with all lead and lifts as directed by the Engineer in Charge |
| 2 | Item No 2:-Excavation in Hard Murum including boulders upto 0.6 m diameter for canel, seating of embakment, filter belt, catch water drains etc and placing the excavated stuff neatly in dump area etc complete as per specification with all lead and lifts as directed by the Engineer in Charge |
| 3 | Item No 3:-Excavation in Soft Rock without Blasting including boulders upto 0.6 m diameter for canel, seating of embakment, filter belt, catch water drains etc and placing the excavated stuff neatly in dump area etc complete as per specification with all lead and lifts as directed by the Engineer in Charge |
| 4 | Item No 4:- Providing and Fixing anchor bar of 25 mm dia 3.375 m length including drilling holes , inserting grout, driving anchor , cost of all materials , machinery , labour etc complete with all lead and lifts as directed by Engineer in Charge. |
| 5 | Item No 5:- Providing and laying in situ cement concrete of grade M-15 of trap / granite / gneiss / quartzite /graded metal for foundation and bedding with Concrete Mixer including placing, compacting, curing etc. complete with an initial lead of 50 m & lift of 1.5 m.A) C. C. 1:2:4 M 15 (40 MSA) For body weir Providing and laying in situ cement concrete of grade M-15 of trap / granite / gneiss / quartzite / graded metal for PCC with or without surface reinforcement / RCC concreting requiring heavy or special type of shuttering for works of gallery, sluice, spillway crest, spillway downstream face, energy dissipating structures, intake structures, training walls, piers, abutments etc. with Concrete Mixer considering lead of 50 m with shuttering and scaffolding, placing, compacting, curing etc complete as per specification including all lead and lifts as directed by the Engineer in Charge |
| 6 | Item No 6:- Providing and Fixing in position TMT FE500 Bar Reinforcement of various diameter for RCC Work, pipe, caps, footing, foundation, slab beam, column, canopies, chhaja, lintels, copings, as per detail drawing and schedule, including cutting, bending, hooking, binding with wire, tack welding and supporting as required as per standard specification with all leads & lifts etc complete as directed by the Engineer-In Charge For Raft & Temp. steel @ 5 Kg. / Sqm |
| 7 | tem No 7:- Providing and fixing canal information board of 1.2 x 0.75 m prepared on 16 gauge M.S. sheet with angle iron frame of size 35 X 35 X 3 mm with cross bracing of size 25 X 25 X 3 mm including painting with one coat of zinc chromate storing primer and two coats each of green/white back ground and back side grey store enamelled bonded with red retro reflective sheet Engineering grade, border / letters / numeral / arrows coated with non pealable crystal clear protective transparent coat retaining 100% reflection including two angle iron post of size 50X50X5 mm of 3.65 m long inflated at bottom drilled on top and painted in white and black bonds of 30 cm with four numbers high strength of G.I. bolts and nuts of size 10 mm dia. and 20 mm long sheet and angle iron post in one piece without joints including all taxes, conveying, fixing in ground with cement concrete in M-15 block of size 60 X 60 X 75 cm etc complete as directed by the Engineer-In Charge Please Enable Macros to View BoQ information |
