|
| 1 | Earth work in bulk excavation by manual means over areas (exceeding 30 cm in depth, 1.5 m in width as well as 10 m2 on plan) including disposal of excavated earth lead upto 50 meters and lift upto 1.5 m, as directed by Engineer-in-Charge. All kinds of soil. |
| 2 | Earth work in bulk excavation by mechanical means (hydraulic excavator) over areas (exceeding 30 cm in depth, 1.5 m in width as well as 10 m2 on plan) including disposal of excavated earth lead upto 50 meters and lift upto 1.5 m, as directed by Engineer-in-Charge. All kinds of soil |
| 3 | Ordinary or hard rock |
| 4 | Earthwork in excavation in foundation, trenches by manual means in drains, pipes (not exceeding 1.5m in width) and for shafts, wells, cesspits and the like not exceeding 10sqm in plan including dressing of sides and ramming of bottom lift of 1.5m and disposal of 1m. All Kinds of soils. |
| 5 | Extra for every additional lift of 1.5 m or excavation/banking excavated or stacked material All kinds of soil |
| 6 | Ordinary or hard rock |
| 7 | Clearing jungle including uprooting of rank vegetation, grass, brush wood, trees and saplings of girth upto 30 cm measured at a height of 1 m above ground level and removal of rubbish upto a distance of 50 m outside the periphery of the area cleared. |
| 8 | Removal of unhygienic materials (so classified by the site engineer) from designated sites and its disposal as per directions of Engineer Incharge, all inclusive. |
| 9 | Engagement of Labourer (Skilled) |
| 10 | Engagement of Labourer (Unskilled) |
| 11 | Engagement of shikara .Boat along with Boatman |
| 12 | Engagement of ( Boat Kutch) along with boat man. |
| 13 | Cutting saw machine (wood cutter) Including POL and Operator (Complete) |
| 14 | Engagement of JCB including POL and driver complete. (During Work) |
| 15 | Hire charges of Contract Carrier (vehicle) Like Sumo/Scorpio/Tawera during day or night alongwith licensed comercial driver for site inspection/Emergency Situations/ movement of officials within the Divisional jurisdiction including Driver and POL on need basis only . |
| 16 | Engagement of vehicles (Tractor) for different nature of works inc.cost of service of operating staff,cost of POL and all other consumable for the machinery at site as directed by in charge engineer complete job. |
| 17 | Removing/Fixing of gauge plates on existing channel including cost of nuts and bolts and geyser bolts, welding/drilling of holes where ever required including all types of carriages upto site of work including necessary arrangements of boats, ladders and returning of damaged rotten gauge plates to divisional store. Complete job at site of different sizes, viz 1.50 x 0.15m / 1.50 x 0.20 m |
| 18 | Placing/ Fixing /Supply of gauge plates of fibre glass reinforced plastic (FRP) 5mm thick sheet very sturdy, gel coat finish composite material, sandwich with M S strip by contact moulding process, engraved moulded bandwidth and figures with computerized gauge marking with reflective radium pasting, spray lamination with polyurethane chemical for surface protection. including cost of nuts and bolts and geyser bolts, welding/drilling of holes where ever required including all types of carriages upto site of work including necessary arrangements of boats, ladders 1.50 x0 .15m /1.50 x 0.20 m (Complete Job) |
| 19 | CEMENT CONCRETE (CAST-IN-SITU): Providing and laying in position cement concrete of specified grade including curing but excluding the cost of centring and shuttering. All work upto plinth level with: 1:3:6 (1 cement : 3 coarse sand : 6 graded stone aggregate 20 mm nominal size) |
| 20 | 1:2:4 (1 cement : 2 coarse sand : 6 graded stone aggregate 20 mm nominal size) |
| 21 | Centering and shuttering including strutting, propping etc and removal of form work for foundation, footings, columns. |
| 22 | Structural steel work in single sections, trusses and framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer all complete. Welded |
| 23 | Steel reinforcement for Rcc work including straightening, cutting, bending, placing in position and binding all complete upto plinth level TMT bars |
| 24 | Nut bolts |
| 25 | Electric Welding |
| 26 | 12 volt 26 Ah Battery for AWLR of approved Brand Quality |
| 27 | Solar Pannel for AWLR of 60 watt or more of approved Brand Quality |
| 28 | Carriage of material from Approved Source up to dumping site of work, including loading, unloading and stacking etc. complete by Mechanical Transport Sand/20mm agg. / Stone Dust avg. lead of upto 01 Kms |
| 29 | Sand /20mm agg. / Stone Dust avg. lead of upto 02 Kms |
| 30 | Sand /20mm agg. / Stone Dust avg. lead of upto 03 Kms |
| 31 | Sand /20mm agg. / Stone Dust avg. lead of upto 04 Kms |
| 32 | Sand /20mm agg. / Stone Dust avg. lead of upto 05 Kms |
| 33 | Steel /cement avg. lead of upto 01 Km |
| 34 | Steel /cement avg. lead upto 02 Kms |
| 35 | Steel /cement avg. lead upto 03 Kms |
| 36 | Steel /cement avg. lead upto 04 Kms |
| 37 | Steel /cement avg. lead upto 05 Kms |
| 38 | Extra Carriage of material from dumping site to actual site of work, including loading, unloading and stacking etc. complete by manual labour.Sand/ 20mm agg./ Stone Dust for an avg. lead upto 50 mtr. |
| 39 | Steel for an avg. lead upto 50 mtr. |
| 40 | cement for an avg.lead upto 50 mts. Please Enable Macros to View BoQ information |
