|
| 1 | Dismantling of plain or corrugated steel sheeting any gauge, thickness, including Nainital or similar pattern roof coverings complete all as specified and directed by Engr-in-Charge. |
| 2 | Dismantling wrought iron or mild steel work of any description not otherwise provided for complete all as specified and directed by Engr-in-Charge. |
| 3 | S&F 0.63mm thick GI corrugated mild steel sheeting with two corrugations side lap, fixed with self tapping screw or L-type or J-type or crancked hook bolts and washers as in roofs, walls etc, with grade of zinc coating 275 complete all as specified and directed by Engr-in-Charge. |
| 4 | All as per Srl Item No-3 above but except sheet complete all as specified and directed by Engr-in-Charge. |
| 5 | S&F 2mm thick fibre glass reinforced translucent corrugated sheeting with two corrugations side lap fixed with self tapping screw or L-type or J-type or cranked hook bolts as in roof, wall etc complete all as specified and as directed by Engr-in-Charge. |
| 6 | S&F Pre-painted galvalume aluminum zinc coating GI based corrugated steel sheet 0.50mm thick of specified colour having tensile strength of 550 Mpa as in roof covering/ cladding to wall, fixed with self tapping screws complete all as specified and directed by Engr-in-Charge. |
| 7 | All as per Srl Item No-06 above but except sheet complete all as specified and directed by Engr-in-Charge. |
| 8 | S&F Pre-painted galvalume aluminum zinc coating GI based plain steel sheet 0.50mm thick of specified colour having tensile strength of 550 Mpa as in roof overing/ cladding to wall, fixed with self tapping screws complete all as specified and directed by Engr-in-Charge. |
| 9 | All as per Srl Item No-08 above but except sheet complete all as specified and directed by Engr-in-Charge. |
| 10 | S&F in repairs 11-12 mm thick prelaminated particle board, interior grade, prelaminated one side with decorative choice lamination & other side balancing white lamination fixed with nails on wall to timber frame work complete all as specified and directed by Engr-in-Charge. |
| 11 | S&F in repair Anodised aluminium frame work for doors, windows, ventilators and partitions (Fixed portions) with extruded built up standard tubular sections / appropriate Z sections and other sections of approved make conforming to IS: 733 and IS:1285, fixing with dash fasteners of required dia and size, including necessary filling up the gaps at junctions, i.e. at top, bottom and sides with required EPDM rubber/ neoprene gasket etc. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, Aluminium snap beading for glazing/ paneling, C.P. brass/ stainless steel screws, all complete as per architectural drawings complete all as specified and directed by Engr-in-Charge. |
| 12 | S&F 5mm thick sheet glass, oridinary quality and glazing with oil putty in square exc 0.50sqm in each pan complete all as specified and directed by Engr-in-Charge. |
| 13 | M&L Fe-290 (Gde E-165) for roof trussed (framed) trussed, purlins, crane gantries, rails and fastening and heavy bracket framing (Beam, tee, angle, channel or flat sections) including distance pieces, cleats etc complete all as specified and directed by Engr-in-Charge. |
| 14 | S&F MS Sections for joists, channel, angle or tee sections fixed independently without connecting plates of Grade Fe 290 (Gde E-165) complete all as specified and directed by Engr-in-Charge. |
| 15 | M&L prepation of new or previously untreated surfaces of steel and applying two coat of Synthetic enamel paint over a coat of red oxide primer complete all as specified and as directed by Engr-in-Charge. |
| 16 | M&L for preparation of old surfaces of steel and applying two coat of Synthetic enamel paint complete all as specified and as directed by Engr-in-Charge. |
| 17 | Note : Deduction for amount of Rs. 61,520.00 as listed in Schedule 'A' Part-II (Schedule of Credit) shall be made while awarding of contract. Please Enable Macros to View BoQ information |
