|
| 1 | Demolition of brick work or stone/boulder masonry built in cement mortar including all quoins, arches, pillars etc complete all as specified and directed. |
| 2 | M & L for brick work with sub class \\"B\\" brick (old size) straight or curved on plan to any radius in half brick thick walls built in CM 1:4 to any radius complete all as specified and directed. |
| 3 | M & L for old size brick work with fly ash bricks straight or curved on plan exc 6m mean radius in CM 1:6 completed all as specified and directed. |
| 4 | Taking down cement plaster any description on brick or stone walls or RCC roofs/ceiling etc including raking out joints, hacking for key, scrubbing down with water complete all as specified and directed. |
| 5 | M&L for rendering 15 mm thick on fair face of brick works in CM 1:6 finished even and smooth with out using extra cement complete all as specified and directed. |
| 6 | M&L for rendering 15 mm thick in CM (1:4) on fair faces of brick or concrete surface of wall and finished even and smooth with out using extra cement complete all as specified and directed. |
| 7 | M&L rendering 5 mm thick in cement mortar 1:3 on concrete surfaces of ceiling and finishing the surfaces even and smooth complete. |
| 8 | M&L for 3 mm thick wall care putty on walls incl rubbing and scrapping to make smooth surface for further treatment all as specified and directed. |
| 9 | M&L for complete removal of existing treatment incl preparation of old decorated surfaces of walls and apply two coats of white wash complete all as specified and directed |
| 10 | M&L for Preparation of Newly Plastered surfaces of Wall and applying Two coats of White Wash all as specified and directed. |
| 11 | M&L for Preparation of old surfaces of ceiling and applying two coats of white wash complete all as specified and directed. |
| 12 | M&L for preparation of old plastered surfaces of ceilings and applying one coat of oil bound distemper complete all as specified and directed. |
| 13 | M&L Preparation of Newly Plastered surfaces of Ceiling and applying Two coats of White Wash complete all as specified and directed. |
| 14 | M & L for applying two coats of oil bound distemper on old wall or concrete over a coat of primer on prepared surfaces including & rubbing with sand paper after Complete removal of existing treatment from walls all as specified and directed by Engineer-in-Charge. |
| 15 | M&L for preparation of new plastered surfaces of walls or concrete and applying two coats of oil bound distemper over a coat of primer complete all as specified and directed. |
| 16 | M&L for preparing old plastered surfaces of walls, Facias, cornices etc and apply two coats of weather proof exterior emultion paint over a coat of primer after complete removal of existing treatment Complete all as specified and directed. |
| 17 | Taking down chowkhat or frames n exc 1.50 Sqm each with shutters (without taking off shutters from the frame) complete all as specified and directed |
| 18 | Taking down chowkhat or frames exc 1.50 Sqm and n exc 4 Sqm each with shutters (without taking off shutters from the frame) complete all as specified and directed |
| 19 | S & F for solid PVC door frame of size 50x47mm made out of 5 mm plain colour PVC sheet reinforced with MS square tube, supplied and fixing in opening as specified and shown on drawing made on section 8 of SSR 2010 Part-II complete all as specified and directed |
| 20 | S & F factory made solid panel PVC door shutter 30 mm thick style consisting of frame made out of MS tube for top and bottom rails. MS frame shall be covered with heat moulded plain colour PVC “C” channel having a PVC sheet strip of 20 mm width stuck inside with solvent cement for stiles and plain colour PVC sheet for top rail, lock rail and bottom rail on either side and as gap insert for top rail and bottom rail, panelling of plain colour PVC sheet to be fitted in the MS frame welded/sealed to the stiles & rails with suitable PVC sheet beading and jointed together with solvent cement, S & F in the frame as per specifications and shown on drawing in section 8 of SSR-2010 Part-II complete all as specified and directed |
| 21 | M&L in repair 18/19 mm thick Prelaminated particle board, exterior grade, prelaminated one side with decorative choice lamination & other side balancing white lamination, fixed with screws to timber frame work incl dismantling of cupboards any type complete all as specified and directed. |
| 22 | S&F 6 mm thick teak wood liping 18/19 mm width prelaminated particle board fixed with screws complete all as specified and directed. |
| 23 | S & F Continuous (piano) hinges, 40 mm width of mild steel, bright finish or electrogalvanisd complete all as specified and directed. |
| 24 | S&F magnetic catcher with nut and screw of mild steel bright finish complete all as specified and directed. |
| 25 | S&F in repair 100 mm long butt hinges extruded aluminium alloy with galvanised mild steel hinge pin anodised type B-21 complete all as specified and directed. |
| 26 | S&F in repair 150 mm size extruded aluminium alloy handles fabricated type anodised of complete all as specified and directed. |
| 27 | S&F in repair 150 mm long aluminium, anodised, barrel tower bolts of extruded section complete all as specified and directed. |
| 28 | M&L for preparation of old painted surfaces of wood and wood based surfaces of any description, over 10 cm in width or girth and apply one coat of synthetic enamel paint complete all as specified and directed. |
| 29 | S&F Powder coated Aluminium anodised glazed side hung door with following specifications and making good the adjacent surfaces complete all as specified and directed.(a) Cross section of chowkhat/frame 101.60x44.45x2mm thick(b) Cross section of hanging and meeting style 83x44x2mm thick.(c) Top rail of cross section 114x44x2mm thick(d) Bottom rail of cross section 114x44x2mm thick.(e) Lockingrail (middle rail) rail of cross section 100x44x2mm thick.(f) 5 mm thick plain tinted glass of approved make(g) Aluminium handle elsc type -02 Nos per shutter (inside and outside) (h) Aluminium door stopper heavy duty-01 Nos per shutter.(i) Aluminum tower bolt 200 mm long-01 Nos per shutter (inside)(j) Mortice brass Lock- 01 Nos per shutter with key superior quality as spd by Engr-In-ChargeNote : Cost of galss, fittings/ firehires shall be deemed inchssive in unit rate. No extra cost is applicable |
| 30 | S&F Powder coated Aluminium sliding glazed windows with three track and three shutter sliding with following specifications complete all as specified and directed.(a) Three way track for sliding shutters of Cross section 91.8 mm x31.8 mm x1.2 mm thick.(b) Sliding shutters frame of Cross section 40 mm x18 mm x1.2 mm thick(c) 5.0 mm thick plain tinted glass of approved make(d) IDPE rubber gasket for fixing of glass.(e) Locking cleats per shutter-01 Nos.(f) Sliding rollers per shutter-01 Nos.(g) Stainless steel wire cloth 0.36 mm nominal dia of wire and average width of aperture 1.56mm for shutters-01 Nos(h) Fixing screws for frame with wall per window-08 NosNote : Cost of galss, fittings/ firehires shall be deemed inchssive in unit rate. No extra cost is applicable |
| 31 | S&F Powder coated Aluminium Ventilator with frame not less than 1.8 mm thick & including 4 mm thick sheet glass including beading & necessary rubber packing, locking & opening arrangement if required, all fitting and fixture complete all as specified and directed. |
| 32 | S&F 6-7 mm thick aluminium grills of god quality surrounded by aluminium 'C' channel with mesh size 75 X 75mm complete all as specified and directed. |
| 33 | S&F door closer hydraulically regulated designation No 2, universal type, suitable for door shutter of weight not more than 60 Kg of aluminium (extruded section body) complete all as specified and directed. |
| 34 | S&F in repair Stainless steel wire cloth 0.36mm nominal dia of wire and average width of aperture 1.4 mm fixed with stainless steel wire staples or with necessary beads complete all as specified and directed. |
| 35 | Taking down existing water proofing treatment/membrane of any type and Cleaning the surface of roof, to remove all loose dirt etc and preparing the surface complete all as directed by Engr-in-Chrg |
| 36 | M&L for water proofing treatment to roof surface complete all as specified & directed by Engr-in-Charge laid with following course of descrition below :- :- (a) Apply evenly bituminous based primer confirming to IS: 3384-1965 @ 0.30 kg/sqm. (b) APP modified bituminous membrane 3mm thick with non woven polyester core of weight not less than 3.2 to 3.5 Kg/sqm laid and bonded to the sub strata by heat process, over laps of 100mm both in longitudinal and lateral direction shall be sealed/fused by flame torch application as per manufacturer instructions. (c) Applying bituminous based aluminium paint @ 0.20 Kgs/Sqm in two coats over APP membrane |
| 37 | Dismantling of AC/GI plain/Corrugated / semi corrugated roof sheets any type and any size complete all as specified and directed. |
| 38 | S&F Pre-painted galvalume aluminium zinc coating GI based corrugated steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering/ cladding to wall, fixed with self tapping screws as specified and directed. |
| 39 | S&F Pre-painted galvalume aluminium zinc coating GI based Plain steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering/ cladding to wall, fixed with self tapping screws as specified and directed. |
| 40 | Dismantling structural steel work including doors, gates but excluding framed truss etc complete all as specified and as directed by Engineer-in-Charge. |
| 41 | S&F mild steel work in tubular poles & trusses (framed) including purlins,rafters and special shaped washer etc complete using ERW or induction butt welded tubes confirming to IS-1161-1979 grade St-240 complete all as specified and as directed by Engineer-in-Charge. |
| 42 | M&L for preparation of new or previously untreated surfaces of steel of any description, over 10cm in width or girth and apply two coat of synthetic enamel paint over a coat of red oxide primer complete all as specified and directed. |
| 43 | Demolition of cement concrete unreinforced in ground floor and paving n exc 15cm thick (below or above ground level) complete all as specified and directed. |
| 44 | M&L for PCC 1:2:4 type B-0 using 12.5 mm graded stone aggregate as in sub base flooring 25 mm thick surface finished even and rough to receive the topping layer complete all as specified and directed. |
| 45 | M&L for PCC 1:3:6 type C1 using 20mm graded stone aggregate, 50 mm thick in plinth protection laid in panels and finished even and smooth without using extra cement including necessary form work complete all as specified and directed.. |
| 46 | Dismantling floor, hearth or wall tiling including cement mortar bedding etc (but not backing) and removing rubbish off the premises complete all as specified and directed. |
| 47 | M&L for Machine cut kota stone slab flooring mirror finished 18-20 mm thick (each slab not less than 0.25 Sqm) over cement screed base laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab with 15 mm thick screed bed or bedding layer in cement mortar 1:6, including rubbing and polishing complete all as specified and directed. |
| 48 | M&L for Machine cut kota stone in riser of steps, skirting, dado and pillar mirror finished 18-20 mm thick over cement base rendering laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab with 10 mm thick screed bed or bedding layer in cement mortar 1:4, including rubbing and polishing complete all as specified and directed. |
| 49 | M&L for Non skid ceramic coloured tiles 7 to 8 mm thick (square/rectangular) area of each tile exceeding 0.18 Sqm but not exceeding 0.38 Sqm in floor etc set and jointed in neat cement slurry and pointed in white or coloured cement to match with the shade of tiles including 15 mm thick screed bed in cement mortor 1:6 complete all as specified and directed. |
| 50 | M&L for glazed ceramic coloured tiles 350 x 250 x 7 mm / 450 x 350 x 7 mm thick coloured on vertical surface such as dado /skirting / risers to steps etc jointed in neat cement slurry and pointed in white or coloured cement to match surface of tiles over and including rendering 10 mm thick in cement mortor 1:4 complete all as specified and directed. Note- (i) The size of tiles (except thickness) may be varied during execution without any price adjustment. |
| 51 | M&L Vitrified Ceramic tiles 7-8 mm thick on vertical size not exceeding 0.36 sqm, as in dado/skirting including 10mm thick renderig in CM 1:4 complete jointed in neat cement stury & pointed in whit/colour cement to to matet the st ade all as specified and directed. |
| 52 | M&L for 16-18 thick granite (of any type) work (table rubbed and polished) in steps, jambs, pillars, window cills, cooking platforms and like in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite complete all as specified and directed. |
| 53 | Rounding to edges of stone slabs one edge, such as in steps, cooking platform, and other similar situations |
| 54 | Takig down wall panelling and similar work complete all as specified and directed. |
| 55 | S & F Moulding as in cornices, picture rails and the like exc 13 & n.exc 25 sqcm Fillet wrought complete all as specified and directed. |
| 56 | M&L 12 MM thick Plywood, grade BWP, type BB fixed with screws to timber frame work complete all as specified and directed. |
| 57 | S&F 5 mm thick PVC sheet fillet of width 35 mm for wall paneling inclusive of fixing on to wall to make PVC frame as shown on drawing in section 8 of SSR-2010 Part-II complete all as specified and directed |
| 58 | S&F solid PVC Wall Lining consisting of 5mm thick Plain colour printed PVC Sheet inclusive of solvent cement and fixing at site on PVC Frame all as per specified and directed. |
| 59 | Taking up & down GI steel tubing & connections including cleaning for refixing or removal to store for 15mm bore of pipe complete all as specified and directed. |
| 60 | Taking up & down GI steel tubing & connections including cleaning for refixing or removal to store 20mm bore of pipe complete all as specified and directed. |
| 61 | Taking up & down GI steel tubing & connections including cleaning for refixing or removal to store 25mm bore of pipe complete all as specified and directed. |
| 62 | Supplying and fixing of 15mm bore dia, CPVC pipes SDR 11 & plain CPVC SDR 11 fittings, and brass fittings wherever necessary as in connection with bb tap,pillar tap, angle cock etc. fixed on walls/ceiling or laid in floors, etc, complete all as specified and directed. |
| 63 | Supplying and fixing of 20mm bore dia, CPVC pipes SDR 11 & plain CPVC SDR 11 fittings, and brass fittings wherever necessary as in connection with bb tap,pillar tap, angle cock etc fixed on walls/ceiling or laid in floors, etc, complete all as specified and directed. |
| 64 | Supplying and fixing of 25mm bore dia, CPVC pipes SDR 11 & plain CPVC SDR 11 fittings,and brass fittings wherever necessary as in connection with bib tap,pillar tap, angle cock etc fixed on walls/ceiling or laid in floors, etc, complete all as specified and directed. |
| 65 | Cutting chases in brick walls, pinning in. making good to facings where required and pointing in cement mortar 1:3 to ends or edges of landings, steps, cills, sunshades, shelves, lintels, etc.; and cutting chases for concealed water tubing or concealed conduit wiring, etc., and making good, cutting not exc 10 cm girth complete. |
| 66 | S&F in repair bib tap cast copper alloy chromium plated with crutch or butterfly handle fixed to 15 mm dia GI tube/CPVC pipe all as specified and directed. |
| 67 | S&F in repair 15 mm fancy type pillar taps chromium plated cast copper alloy with capstan heads screwed down high pressure with or without lettered ‘Hot’ or ‘cold’ with long screwed shanks and fly nuts fixed and complete |
| 68 | S&F in repair 15 mm fancy type stop valve/angle valve cast copper alloy chromium plated screwed high pressure with crutch or butter fly handle screwed both ends for iron or union and fixed to 15 mm GI tube complete all as specified and directed by Engineer-in-Charge. |
| 69 | S&F in repair 25mm dia ball Brass valves, high pressure, with polythene float and fly nut complete, screwed for iron pipes or brass ferrule and fixed as in PVC Service tanks all as directed. |
| 70 | S & F in repairs 25mm bore gun metal gate valves with iron wheel head screwed both ends for iron pipe and fixed. |
| 71 | S&F in repairs PVC connection 15mm size with PTMT nuts, of 450mm length complete all as specified and directed. |
| 72 | S & F in repairs, vitreous china wash basin, white, flat back, size 550x400mm with brackets, inc.cutting for fixing & pinning in ends of brackets including PVC waste pipe complete all as directed by Engr-in-Chrg |
| 73 | S& F in repairs Counter Wash hand basin size 560x400x205 mm fixed on Granite/Marble or other appropriate top coloured including chromium plated waste coupling, PVC connection and waste pipe complete all as specified. |
| 74 | S&F in repairs viterious china squatting pan orissa pattern size 580x440mm white integal foot rest including concrete bedding & including P or S trap 100mm complete all as directed by Engr-in-Chrg |
| 75 | S&F in repair PVC low level flushing cistern (white) 10 Ltrs capacity with inlet, ball valve, float and handle internal fitting, push button operated type with and including brackets etc complete. |
| 76 | S&F Grating doom 125 mm dia with waste hole of PTMT Minimum weight 40 gms complete all as specified and directed. |
| 77 | S&F in repair CP brass towel rail `D’ type 60Cm long fixed to wall all as spd and directed by Engr-in-Charge |
| 78 | M&L 32mm dia bore Waste fittings, brass, chromium plated for glazed ware sinks, waste pipe for basins, etc.with long screwed shanks and fly-nuts, flange end bedded in red lead cement complete all as specified and directed. |
| 79 | S&F Bevelled edge mirror of size 600x450mm of selected quality glass 4mm thick mounted on 6mm thick AC building board or commercial ply wood and fixed with wooden plugs with chromium plated screws including taking down existing mirror . |
| 80 | S&F in repair 75 mm PVC (SWR) floor trap with grating including jointing with solvent cement. Complete all as specified and directed |
| 81 | Demolition and breaking up drain pipe (salt glazed ware, AC or reinforced concrete,PVC ) set in cement mortor for any size & type complete all as specified and directed. |
| 82 | M&L for PVC (SWR) pipes single socketed, in any length with rubber ring joints, fixed to walls or laid in floors of 75 mm bore of pipe etc complete all as specified and directed. |
| 83 | M&L for PVC (SWR) pipes single socketed, in any length with rubber ring joints,fixed to walls or laid in floors of 110 mm bore of pipe etc complete all as specified and directed. |
| 84 | S&F PVC (SWR) bends any radius of 75 mm bore with out access door complete all as specified and directed. |
| 85 | S&F PVC (SWR) bends any radius of 110 mm bore with out access door complete all as specified and directed. |
| 86 | S&F PVC (SWR) bends any radius of 75 mm bore with access door complete all as specified and directed. |
| 87 | S&F PVC (SWR) bends any radius of 110 mm bore with access door complete all as specified and directed. |
| 88 | S&F PVC (SWR) vent cowl 75 mm bore complete all as specified and directed. |
| 89 | S&F PVC (SWR) vent cowl 100 mm bore complete all as specified and directed. |
| 90 | S&F stack clamp made out of 50x5 mm flat iron, 16mm dia round iron stays including bolts & nuts and securing ends of stays to wall or roof for any dia of pipe complete. |
| 91 | S&F sinks with drainage board made of stainless steel lmm thick kitchen or laboratory with plugs, washers and wastes; including bedding in cement mortar to dwarf wall or including fixing cantilever brackets and connecting union to pipe overall size 915mm x 460mm bowl size 410mm x 330mm x 160mm complete all as specifeid |
| 92 | Dismantling PVC water tanks exc 500 ltr but not exc 1000 ltr capacity and removing to store complete all as specified and directed. |
| 93 | S&F 1000 ltr capacity Rotational moulded polyethylene water storage tanks (cylin-drical vertical with closed top) hoisted and fixed in position all as specified complete |
| 94 | S&F for 25mm dia Stainless Steel Curtain Rod with brackets and rings complete all as specified and directed |
| 95 | Taking down carefully copper/aluminium point wiring (light,fan,bell, socket or power) complete,including fixtures and fittings such as switches, ceiling roses, holders,regulators, sockets, tube light fittings i.e removing materials to store for keeping in safe custody or for taking credit (credit for above items should be made for conditions separately ) and including making good the disturbed surfaces to match with existing surface and colour shade with putty for smooth finishing without andulations complete all as specified and directed |
| 96 | Material and labour for cutting chasing,pinning of brick/ stone/concrete wall at any height wall cutting and chases for concealed wiring for 20/25 mm PVC conduit dia pipe,water tubing,etc and making good to facings where required and pointing in cement motor 1:3 to ends or edges of landigs,wall surfaces etc,cutting not exc 10 cm girth and including making good the disturbed surfaces to match with existing surface and colour shade with proper putty for smooth finishing with existing wall complete all as specified and directed Please Enable Macros to View BoQ information |
| 97 | Material and labour for cutting chasing,pinning of brick/ stone/concrete wall at any height wall cutting and chases for concealed wiring for 20/25 mm PVC conduit dia pipe,water tubing,etc and making good to facings where required and pointing in cement motor 1:3 to ends or edges of landigs,wall surfaces etc,cutting not exc 10 cm girth and including making good the disturbed surfaces to match with existing surface and colour shade with proper putty for smooth finishing with existing wall complete all as specified and directed Please Enable Macros to View BoQ information |
