|
| 1 | Demolition of stone slabs and tiles of any description or thickness in floors & wall, laid bedded & pointed in any mortar. |
| 2 | M & L for 25 mm thick cement concrete in flooring type B-O, 1:2:4 (12.5mm graded aggregate) with liquid water proofing compound as per manufacturers instructions for laying floor tiles, compelte all as specified and directed.. Note (WPC will be measured and paid separately). |
| 3 | M&L for Virified Ceramic tiles 9 to 10 mm thick light shade (square/ rectangular) polished, area of each tiles not exceeding 0.36 sqm,as in floors etc set over and including high performence adhesive manufactured by somani ezifix tile adhesive or equivalent mixed in cement as per manufacturer instruction and jointed with polymer modified cementetious grout manufactured by somani ezy grout or equivalnet of pigment matching to tile color including screed bed or bedding layer of mortar 15 mm thick for laying floor finishes with CM 1:4 (Tile pattern and decoration may be as suggested by Engineer-in-charge). |
| 4 | M&L for Virified Ceramic tiles 9 to 10 mm thick light shade (square/ rectangular) polished, area of each tiles not exceeding 0.36 sqm, as in skirting etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match including backing coat 10 mm thick in CM 1:3, compelte all as specified and directed. |
| 5 | M & L for 18 to 20 mm thick machine cut green marbel stone in single piece as in steps and risers, landings, jambs, pillars, window cills, and like laid over cement screed and jointed with base laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing complete including 10 mm thick plastering with cement mortar 1 : 3 including necessary adhesive complete all as specified |
| 6 | Taking down chowkats or frame with shutter (without taking off shutter from the frame) n.exc 1.5sqm each |
| 7 | Taking down chowkats or frame with shutter (without taking off shutter from the frame) Exc 1.5 Sq m but n.exc 4.00 Sq m each |
| 8 | M&L for pressed steel frames for doors with one or more rebates including necessary fixing lugs,hinges,lock strike plate, etc.,complete, as specified, supplied and fixed of size 165 x 60mm of 1.25 mm to 1.60 mm thickness of sheet complete all as specified and directed. |
| 9 | M&L for 35mm thick factory made Flush shutters, solid core construction, with block board core and plywood face panels, comercial type 1.0mm thick (veneered on both side) with decorative choice laminated type 1 (factory laminated), or surface finish, 6mm thick or external teak wood lipping fixed with nails, color and pattern as approved by EIC/GE. |
| 10 | S & F 35mm thick 2nd class Hard wood Glazed and Skelton shutters, open rebated and prepared to receive glass, gauze etc(without sash bars) edges of framing plain, chamfered or rounded, fitted with cut ,mitered and moulded beads for securing glass etc, sizes of members of shutters as specified in SSR Part-I, Section 8, clause 8.24 (a); supplied and fitted to chowkats, compelte all as specified and directed.. |
| 11 | Dismantling existing aluminium partition including glass panels (if any), door frames, shutters, fixed/ sliding components, hardware fittings, and supports, stacking the serviceable materials as directed, and disposing of unserviceable materials/debris outside the site premises as per instructions, all complete as directed by the Engineer-in-Charge |
| 12 | S&F of Powder coated aluminium frame for doors, windows, ventilators with one or more rebates including joining cleat for fixing etc. complete all as specified |
| 13 | S&F Powder coated aluminium (minimum thickness of powder coating 50 micron) for shutters of doors, windows & ventilators including providing and fixing hinges/ pivots and making provision for fixing of fittings wherever required including the cost of EPDM rubber/neoprene gasket required with extruded built up standard tubular sections/ appropriate Z sections and other sections of approved make conforming to IS: 733 and IS:1285, fixing with dash fasteners of required dia and size, including necessary filling up the gaps at junctions, i.e. at top, bottom and sides with required EPDM rubber/ neoprene gasket etc. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, Aluminium snap beading for glazing/ paneling, C.P. brass/ stainless steel screws all complete as per architectural drawings and the directions of Engineer-in-charge. |
| 14 | S&F 4.00mm thick sheet glass, selected ordinary quality and glazing with rubber beading or with glazing clips not exc 0.5 sqm in each pane including solar control film 25 micron reflective type sticked to glass panes as per instructions of manufacturers, all as specified and directed. |
| 15 | S&F 5.50mm thick sheet glass, selected ordinary quality and glazing with rubber beading or with glazing clips exc 0.5 sq. m in each pane including solar control film 25 micron reflective type sticked to glass panes as per instructions of manufacturers, all as specified and directed. |
| 16 | S&F stainless steel wire cloth, 0.36mm nominal dia of wire and average width of aperture 1.40mm and fixed with stainless steel wire staples, compelte all as specified and directed.. |
| 17 | Supply and fixing double action floor spring hydraulically regulated made up of minimum 1.25 mm thick aluminium alloy sheet foundation box,main body with stainless steel cover, governing pivot made of brass, other parts made of mild steel heavy duty and fixed complate all as specified and directed. |
| 18 | M & L Cement concrete type B1, 1:2:4 (20 mm graded aggregate) as in coping, bed plate for hold fast etc, compelte all as specified and directed. |
| 19 | M&L Cement concrete type D-2 ,1:4:8 (40mm graded aggregate) incl formwork and finishing surfaces of concrete in sub-floors, sub-bases, etc.even and rough to receive the topping layer complete all as specified and directed. |
| 20 | M&L 80 mm thickness M-40 Grade colour precast concrete interlocking paver block rubber moulded glossy finish any shape and size confirming to IS 15658-2006 of incl 50mm thick Sand filling under interlocking block incl watering and consolidation, complete all as specified and directed. |
| 21 | M&L for 100mm butt hinges of stainless steel grade 202, 14 gauge thickness, medium weight of approved make fixed with pressed steel door frame/Angle iron frame/PVC door frame with screw complete all as specified and directed. |
| 22 | S & F 200mm long Aluminium anodised barrel tower bolt of extruded section and fixed, compelte all as specified and directed. |
| 23 | S & F 150 mm size extruded aluminium alloy handles, febricated type anodised, compelte all as specified and directed. |
| 24 | S & F 250 mm aluminium alloy anodised sliding door bolts, with hasp and staple (bolt type) not less than 12mm dia with and and fixing clips of sheet cast or extruded section and fixing bolt and sliding bolt of extruded section or cast aluminium and fixed to wooden door shutters, compelte all as specified and directed. |
| 25 | S&F brass 4 lever type Mortice lock, vertical type, size 100 mm all as specified and directed. |
| 26 | S & F tubular curtain rails 25mm dia stainless steel 202 grade drapery type complete all as specified directed |
| 27 | S & F in repairs stainless steel socket fancy type with bracket for 25mm dia stainless steel tubular curtain rod (design of socket shall be approved by Engr-in-Charge at the time of execution) as directed |
| 28 | M & L in repair for Framed work such as grills, gratings, etc.. with ends of bars shouldered and/or riveted, or forged into spikes; framed guard bars; barred iron doors; ladders; framed balusters; walk ways; railings; framework (caging) of water tanks and similar work con- forming to Fe.290.Gde-E-165 complete all as specified and directed. |
| 29 | M & L for preparing new steel surface of any description not otherwise described over 10cm width or girth and applying two coats of synthetic enamel paint over a coat of red oxide primer, compelte all as specified and directed. |
| 30 | M & L for preparing new wooden surface of any description not otherwise described over 10cm width or girth and applying two coats of synthetic enamel paint over a coat of pink primer, compelte all as specified and directed. |
| 31 | Demolition of cement concrete as in ground floors/path and pavings n exc 15 cm thickness all as specified and directed. |
| 32 | M&L For M-25 grade concrete mix as in flooring 100 mm thick using 20mm aggregate incl mixing metallic floor hardener (as per design of Mix) and expansion joints, machine-trowelled vacuum dewatered concrete (Trimix) flooring including surface preparation, laying, compaction, vacuum dewatering, power troweling, curing, and finishing complete as per specifications and instructions of Engineer-in-charge. |
| 33 | Supply only metallic floor hardener (Nito floor hard top) complete all as specified and directed by the Engr-in-Charge. |
| 34 | M&L 20mm thick perforated filler for expansion joint, complete all as specified and directed. |
| 35 | Supply and application of Nito seal 280 for filling up joint all as specified and directed. |
| 36 | Providing and laying an epoxy based colour flooring painting of minimum thickness 3mm including surface preparation, primer coat, base coat, colour coat and finishing top coat with approved shade/pigment, complete all as per manufacture's specifications and direction of Engr-in-Charge. |
| 37 | M&L for kota stone slab 18-20mm thick as in steps (Riser & Tread), single piece of required length in cement mortar (1:4) including pointing in white cement (1:2) using stone dust with admixture of pigment to match complete all as specified and directed. |
| 38 | Taking down cement plaster on brick/concrete surface including racking out joints hacking for key scrubbing down with water etc. |
| 39 | Demolition brickwork or stone/boulder masonry built in cement mortar including all quoins, arches, pillars, etc, |
| 40 | M&L Brickwork with sub class ‘B’ bricks straight or curved on plan exc 6 m mean radius built in CM 1:6, compelte all as specified and directed. |
| 41 | M & L Rendering 10 mm thick on fair faces of brick work or concrete surfaces of wall in cement mortar 1:6 for finished fair complete all as specified and directed. |
| 42 | M&L Rendering in two layer on fair faces of brick work or concrete sur-faces of wall 5 mm thick in CM 1:4 mixed with WPC as per manufacturers instructiion for finished even and smooth without using extra cement over 10 mm thick rendering in cement mortar 1:6, compelte all as specified and directed.(WPC will be measured and paid separately). |
| 43 | M&L Rendering 5 mm thick on fair faces of brick work or concrete sur-faces of ceiling in cement mortar 1:3 for finished even and smooth (without using extra cement), compelte all as specified and directed. |
| 44 | M & L for preparing new plastered surfaces of wall and applying two coats of oil bound distemper over and including a coat of 2mm average thickness birla/ equivalent wall care putty and one coat of primer all as specified and as directed. |
| 45 | M & L for preparing new plastered surfaces of ceiling and applying two coats of oil bound distemper over a coat of alkali resitant primer all as specified and as directed. |
| 46 | M& L for preparing new plastered surface and applying two coats of 100% Premium acrylic emulsion paint having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance, dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives @ 1.43 litre/ 10 sqm over and including priming coat of exterior primer applied @ 0.90 litre/ 10 sqm over new surfaces, compelte all as specified and directed. |
| 47 | M & L for Complete removal of exiting treatment from wall and preparation of old surfaces of wall and applying two coats of oil bound distemper over and including a coat of 2mm average thickness birla/ equivalent wall care putty and one coat of alkali resitant primer all as specified and as directed. |
| 48 | M& L for Complete removal of exiting treatment from wall and preparation of old surfaces and applying Two coats of 100% Premium acrylic emulsion paint having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance, dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives @ 1.43 litre/ 10 sqm over and including priming coat of exterior primer applied @ 0.90 litre/ 10 sqm over new surfaces, compelte all as specified and directed.. |
| 49 | M & L for complete removal of all existing treatment and providing two coats of OBD over a coat of alkali resitant primer as in ceiling all as specified and directed. |
| 50 | M & L for complete removal of loose / cracked concrete incl reinforcement if required, from RCC roof projection,chajja,fins,facia, roof bands etc and making good with PCC (1:11/2; :3) type A0 (using 12.5 mm graded stone aggregate) in any slab and in any position finished the surface even and smooth with out using extra cement including necessary form work if required complete and applying three coat of white wash/two coat of cement base paint to match with the existing surface as directed by the Engr- in -Charge .(Reiforcement will be measured and paid saperately under respective item. |
| 51 | M&L for Providing precast cement concrete Type B1, 1:2:4 (using 20 mm Aggregate) as in landings, cover slabs (for man holes etc.) chullah hoods, chajjas, water troughs, mangers, shelves and similar articles with plain faces including chamfers, weatherings, throating etc. and setting in mortar complete with joints to matchcomplete incl form work if any all as specified and directed. (reinforcement shall be measured and paid separately) |
| 52 | M & L for mild steel TMT bars 10mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips all as specifed and as directed. |
| 53 | M & L for complete removal of existing water proofing treatment including PCC tiles, plaster and concrete padding, roughening of concrete surface, cleaning and washing down the surface with water and removing debris/rubbish out side MD land complete all as specified and directed by Engr-In-Charge |
| 54 | M&L for Cutting grooves in brick wall, 75mm wide and 65mm deep and shaping horizontal face of groove with cement mortar 1:3 complete all as specified and directed. |
| 55 | M&L for 40 mm avg thick PCC padding in cement concrete type B0 (1:2:4) using 12.5 mm graded stone aggr mixed with WPC as per manufacturer's instructions of cement finished surface even and fair without using extra cement for laying of WPT all as specified and directed. (WPC will be measured and paid separately). |
| 56 | M & L Rendering 10 mm thick on green concrete surfaces of slab in cement mortar 1:3 mixed with WPC,ISI marked as per manufacturer's instructions approved for finished even and smooth without using extra cement complete all as specified and directed.(WPC will be measured and paid separately). |
| 57 | M & L for water proofing treatment to non accessible roof slabs by applying one coat of cold bituminous primer @ 0.3kg/sqm and conforming to IS-3384, laying APP based polyster modified membrane reinforced non wooven polyster of 3.50 Kg/Sqm (minimum), 3mm thick with plain polythene finished and sealing all the overlap 75mm in length side and 100mm in width side of membrane by torching the same joints of membrane including applying one coat of bituminous aluminium paint same joints of membrane including applying one coat of bituminous aluminium paint over membrane all as specified and as directed by Engr-in-Charge . |
| 58 | Supply only Internal water proofing compound (Liquid type) all as specified and directed. |
| 59 | S&F in repairs 25mm thick preformed filler for expansion/ crumple joints of roof slab, compelte all as specified and directed. |
| 60 | Demolition of cement concrete of any description and in any position not otherwise specifically provided. |
| 61 | M & L for 75 mm thick PCC 1:3:6 mix type C2 using 40mm graded stone aggregate as in paving finishing cone surface (plinth protection) even and smooth without using extra cement, compelte all as specified and directed. |
| 62 | S&F floor door stopper of aluminium alloy body and tongue, overall length of cover plate 140mm anodised with hard drawn steel spring, fixed in floors complete all as specified and directed. Please Enable Macros to View BoQ information |
| 63 | S&F floor door stopper of aluminium alloy body and tongue, overall length of cover plate 140mm anodised with hard drawn steel spring, fixed in floors complete all as specified and directed. Please Enable Macros to View BoQ information |
